Imate Jamin Problem Data ... Help!!!! - JAMin, XDA Neo, S200 General

the Prophet was working OK with me
Suddenly and without a warning when i connected it with Activesync didn`t response with the computer , but the it was already working but I do not know what happened and the way I am I found after several tests that the problem in the slot of data on the prophet
what i do

..
i didnt got ur question but i think...
*if ur saying prophet suddenly stopped working with activesync...try reinstallin the program & watch out for firewalls...esp with additional firewall some fw does auto reset to all program evry now and again...
*if ur saying theres a problem in data slot(if u mean card holder)...since it is open dust easily go through & amazingly it is pretty thin so other card do supported sometimes jams it ...the best solution is taking a thin earbud & just rubbing it inside...or take a think wire(take out battery first) & try pressing every pin inside gently...
if this doesnt work take to mobile workshop

Related

Left the plane & all hell froze! Qtek auto-rebooting, WH

I just got back from Dubai this morning, and I recieved my first call from the plane. Fine, it worked.... but then...
disaster struck!
The phone has the "no signal" message when I click on the reception icon. I've tried to click the "turn phone off" button but nothing works...
I can't get into the phone settings in the start menu to change networks...
I'm trying to back-up to SD to do a hard reset, but the phone re-boots itself every 4 minutes! The device is also very slow in responding to the commands. E.G. when I place my phone code it takes 3 seconds just to type in the number... strange! I have 48 / 64 MB free in memory and a 256 MB SD card...
I can't connect to activesync because the decive is not being recognized. So I can't transfer anything through the USB... it's gotta be some kind of manual un-locking from the phone itself...
I took out the sim card and am using a crappy nokia until I get this deal fixed.
I searched the forum for possible solutions and some came close, but none popped the cherry...
Have any of you experienced this specific situation? Is there anything I can do to recover my data before hard-reseting the Qtek? I made about 30 new contacts on the recent trip and was going to sync when I got home from the airport... but the 1010 keeps passing out on me!! It's like giving a date a full bottle of Crystal Champange before hitting the bedroom... Sucks!
All my appoinments are on the phone for tomorrow.. it's 2:11AM if anyone can get back soon with instructions or any previous posting, please let me know.. E-mail me... SOMEBODY SAVE MY SOUL!!
HELP!
sorry to hear about ur problem, must be awful
I dunno if any one can save ur soul, but if worst comes to worst, Ill buy ur soul off of u, just gimmie a good price
thanx, an good luck
Does the phone reboot even if plugged into the power? Also have you tried a soft reset with the sd card removed?
try also to remove the SIM or try another one. some of them are faulty.
I had a similar but less traumactic problem in the phone part wouldn't work at all. Turned out that error messages can be saved on the sim card and block functions. Removing and re inserting the sim is enough to clear the block in my case.
Good luck.
I had a similar but less traumactic problem in the phone part wouldn't work at all. Turned out that error messages can be saved on the sim card and block functions. Removing and re inserting the sim is enough to clear the block in my case.
Good luck.

my hermes hang !!!

I 'm now using 2 gb of memory. When i turn off my screen for a moment and trun on the screen. There is nothing comming up. I have to reset my hermes. Pls advise..what 's wrong ? Before i used 1 gb of memory, i never seen this problem.One thing i use calendar plus on the today screen.
After selling my Wizard to get the Hermes, I have discovered that the Hermes is a VERY unstable device.
I have experienced (and still do sometimes) what you are experiencing. From what I can see, this is normal for this device. If this continues, I'll have to sell this and get something else. The other day my device did this and I called it from my house phone to see if it would even ring, and it did not. I guess I could live with the PDA locking up, but if it interferes with the devices primary function as a phone, it's totally unacceptable.
jcute, i was having this problem for a bit, but my issue only occured when it was on the charger and i temporarily shut off the screen, it would then not turn on and would have to softreset every time
i noticed this problem occuring after installing some software including weather software (cant recall exactly which) and skype, not sure which one was the main problem but wasnt using either hence their uninstall and correcting of the problem
good luck, try removing some recently installd software and seeing if the problem persists and perhaps try removing the microsd card and running ur phone without it for a bit to see if the problem is the card
time for rom upgrade ?
thanks for info. I tried to unplug micro sd 2 gb and press power button again ..it 's work !!after that i plugin micro sd again but some icon 's missing at the today screen. Ex. resco today icon , psshutdown, photo contact.....So the question is that i have to do this everytime when screen 's off???
After upgrading to AKU 3.3 and installing my programs only to the main memory, I've noticed far fewer lockups as opposed to before when I ran many programs such as Pocket Player or GPRS monitor from my 2gb sandisk.
I guess the moral of the story is, try not to install programs that access your memory card while your phone is in sleep mode.
DonnieZ said:
I guess I could live with the PDA locking up, but if it interferes with the devices primary function as a phone, it's totally unacceptable.
Click to expand...
Click to collapse
I would not get a Hermes if I wanted it to be a phone primarily. IMHO most of these devices XDAs, are primarily PDAs with a phone tacked on.
Just a humble observation
Mike
my problem is when i scroll or drag the side bar too fast (inside memory card),the device will hang and need to soft reset.
can anybody solve this problem??
Goto www.softwinter.com and try out storage tools. I've found that a regular repair and defrag help the load times from the storage card tremendously. Also, someone mentioned above that reformating your storage card with fat32 helps and I too can confirm that. Let us know if that helps or not.
Lance
one more thing, when i reset my hermes, it hangs at the welcome screen. I always get this problem.

HTC P3300 ARTE100 hangs up

Hello, sorry for my english, is not the best.
I've BIG problem with my P3300. originally it came with WM5, after some time I got update from official site for WM6. Had WM6 maybe for 4 months, everything was just perfect while one day my HTC started do funny things like go off it self (white screen when using navigation). It was a once in a week. After some time it started to be like this few times in a day. I thought what I need to do hard reset. Did. Didn't helped. Than I tried to flash my phone to WM6.1. Phone went mad, was constantly switching off it self, screen just freezes and after that you even can't start the phone around 5-10 min. it just want do anything, even if you plug in the charger, indicating orange light want come up. Than I tried to flash with original WM5. Did that, everything was fine for a day, but after the day it went off, i restarted, and than gone wireless and screen started move to the left and to the right aprox 2 mm. When is connected to computer it want connect to ActivSync, it's coming up message: Can't find IP address, try to disconnect phone and connect again... I did manual configurations in network cards and computer, so when you're looking in network connections looks everything fine, but it's still not recognized by ActiveSync :/ Than i send the phone to recovery mode, connected to the computer and updated to WM6. Same thing, screen shaking, wireless not working, goes off. Is strange thing too, in aprox 24 hr memory is filled up to maximum - than is coming up the message: Storage is full, please delete some programs. :/ Hard Reset have to do every single day... Any idea what's can be wrong with my phone? Tried already a lot of things, no more ideas. I think it's software problem... :/
If anyone have any ideas please share with me... Thanks for everyone.
Anyone any ideas? Please, someone... i don't really wanna put phone in to the bin...
Its a hardware isue
Sorry, I have same problems and try same thinks, finaly I send to service and they say its a commone hardware error on electrical micro connections inside cosed by droping the phone down. Before I send it hangs up 2-3 time at day, now its hapen 1 in 10 day if I accedentaly drop the phone
Hardware issue
I think this is hardware problem..., I have some experience with repair HTC smartphones. Freezing, restarting, problem with screen..., GSM etc,,..
In all cases helps Hot air soldering station, find right chip or module (gsm , proc..) and reheating this.. A frequent problem is BROKEN tin joints BGA chips , after impact of equipment. .. sorry for english...
I'm facing the same problem with my old Artemis.
Since I upgrades, I gave it to a friend. It was working perfectly fine months now, until last week.
The phone keeps freezing, doesn't always boot, many times won't even respond to charger pluged in.
Randomly resoldering the board's chips, sound like a long & hard solution :/

need of some serious help

hey bro !!
i got this imate jasjar 2 years back and i love my uni allot.
need a help from you bro...i am new to all these hav been goin through 100z of threads everyday bt not gettin my answers i hope you would help me out..!!
actually my jasjar suddenly started behavin weird it switched off by itself n wen i switched it back on after the windows mobile screen shows up my jasjar gets a dead blue screen n nothin happens.
tried to connect with active sync 4.0 and 4.1 bt it would not respond and show dat the phone is not connected.
i came across a thread in which a guy said to press bright light button + power button+softreset it sent my phone to a usb mode
then i used mtty tool and its command task 28 to check if my jasjar is wasted or still breathin lucky enough it dint give a formatfaliure msg and there were some steps i followed .
everything went as told n now m stuck on where to get official wm5 for jasjar and how to get out of the usb screen and how to flash the rom...??
please help
To exit boot loader mode: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
With regard to restorig WM5 - I have the official O2 XDA Exec files for their last software release. But I think you said your's is an iMate.You could see if the iMate version listed here: http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades is still available - if not maybe someone has a copy somewhere.
Hope this helps.
hey dat was gr8 bro....bt m still stuck with finding of wm5 for my imate ...!!
i found i mate upgrade bt when i clicked on download an error popped up "550 or 505 change of directory sumthin..."
well i followed the instructions u sent me it worked well bt still need to flash with wm5 ...!!
any chance of u or ur known havin a copy of wm5 rom
its been weeks and everything is gettin hazy ur help would be appriciated allot
thank you so much ..<!!
bro thankx for help i actually flashed my uni with kdskamal cooked wm5 bt my jasjar still gets dead on a greenish screen as it used to get before in blue screen wht m i supposed to do...??
Hi,
Try flashing with a WM6 rom (Tomal's ROMs are always good) and see if you get the same symptoms.
If you do then I suspect that you have a screen/cable connecting screen problem.
But lets rule out software first.
greetings bro...!!
i was up all night flashing wms
i used mtty software so many times that its commands are like hard weird in my brain cant get them out now....lolzzz
my stubborn uni was still stuck on the same dead screen but the only fun thing was that every time i flashed a new wm it used to get stuck on diff colours blue red green black...lolzzz
i scratched my head and i scratched my ass to an extent that i guess it started thinking lolzzz
i got some nice screw drivers and opened up my uni..
damn dis thing is wicked and messy it has things dat i dont know about n havnt even dreamd of in my stupidest dream i hav been lost in a computer motherboard with some good virus as my friend n some bad scary virus but in my uni motherboard i would neva..!
so i just fixed it back...n it worked for a while n den i dont know what tickled its ass.
busted again...!!
i guess ill hit the HTC service centre.
thanx allot bro
respect for ur effort and help...
Hi
for some strange reason the option "incoming com port" in the blue-tooth setting on my jasjar has disappeared. i was wondering if anyone else faced the same problem or if there is a way around it? editing registry n stuff.
because of this the previously paired devices are working fine but the new devices are unable to search the serial/com port facility on my uni.
i have tried resetting but still no luck.
any suggestions?
also i would really appreciate if someone could give me a solution for reading arabic and other such languages on uni.
(btw i am using i.e.TML 8.5 Rom and when i installed it at first the functionality was present so it cant be a ROM issue.)
...
lol... sorry abt earlier maite! i just realized the ridiculous thing i just did. i was supposed to post the reply to ur prob and then start with my sad story but somhow i managed to skip step one .
i m not expert on the device but i like it very much so i when i got one with my o2 contract i bought another one sim free just so that one would keep other company. as far as ur issue goes i have faced almost the same prob in the past and the solution was
1) rotate the screen 90 to get acess to screws at the bottom of the screen.
2) open the screws screws ... btw u might wana check if they are properly fastend before you try this step as i observed that if the screws are properly tightened this problem may solve itself... carrying on open the screws and that would detach the screen from the hinges.
3) where the hinge comes off strip open the cover a little bit and you will see two connections, one for the backlight and one for display (just like any other LCD screen.
4) press the big grip like thingee i.e. display connector with a flathead screw driver to assure they are properly in place. because in my case the connector had come off and hence was causing the system crash. although in my case the screen was only going blue after a while not the whole color palette.
just try if this one works because i m not sure if imate people are going to be any help in this case. i tried calling them a few months back for the lenscover and they said they dont support this device any more :S.

Phone automatically triggers Navi-Panel.

Firstly,i would like to apologise for making another thread with the same topic if there's any.I've searched the forums and most of the threads seem to be 'Dead'.
Last week,my phone had something strange going on.When it's at sleep mode,it automatically lights up.I picked it up and i see this thing called the 'Navi-Panel'.The screen was in landscape mode.The only thing that i can access was the phone.I managed to exit the Navi-Panel through the task manager but the problem's still there,my phone and my SMS are in landscape.Also,the phone calls that i make and received are always on loudspeaker mode.I also cannot connect the phone to the computer via the USB. I've tried various ways to fix the phone such as hard reset and rom flashing but it's still the same.I'm currently on the Stock rom version 1.66.707.1(76641) WWE. Can someone post a solution for my problems?
It happened to me twice when a tiny drop of water dropped on the micro usb slot, creating a temporary short circuit.
Make sure the slot is clean, (no conductor material inside).
It may be a small chance, but it is still a chance...
I have the same problem
My phone got wet last night due to rain. And the Navi panel kept coming up. So I set the option for Navi panel not to have an automatic launch. Thats fine now, but I got another problem to sort through. When ever I pick up a call the speaker is automatically turned ON. Its embarrassing now. I am just hoping its temporary..
If anyone has an idea on how to turn off the automatic speaker on call pick up, pls let me know.. Thanks in advance.
Whats more is: I cant connect to the Activesync now. The phone is charging well though.
I can probably live with that since I can connect through Blue Tooth. Hoever, if someone has any idea on how to turn off the "Auto external Speaker mode", pls let me know .. any registry key ... or any other means.
Thanks in advance.
This happened to me a few months back now on a wet evening, assuming the phone must have got wet through my pocket. Tried everything to fix it, left it to dry out for 24 hours near radiator with the battery out to no avail. But then flashed a new ROM and it started working. (Had to flash the same ROM three times till it started working. Every ROM since has been fine)
Hope this helps.
Thanks .. That gives me a hope. Could you pls tell me what ROM you flashed.. may be its something to do with that specific ROM..
Activesync died...
Thanks all of you who contributed to the forum. My HD2's activesync stopped working yesterday... and main challenge was to put shipped ROM and send it to the repair...
There is only one thing that I could not explain... When OS is up and running (regardless whether it is cooked or shipped) there is no active sync can be established (only charge function is working). However, when phone is in boot loader (RGB screen) I could connect it thru USB and install ROM from computer...
switch off quick sync on HD2
XAH said:
switch off quick sync on HD2
Click to expand...
Click to collapse
Thanks for trying to help XAH, but this was the first thing in my troubleshooting process. Usually it helps when you plug in the phone, computer acknowledges it, but pop in warning sign that USB device is not recognized. In my case there was no reaction (on multiple computers) - like nothing is plugged in... Will see what repairer says... I'll post an update as soon as I'll hear from them.
got my HD2 from repair centre
I've got my HD2 back from repair centre... and it works fine... most bizzar part is paper say that nothing was done...
a friend of me hat this problem some time ago. it disappeared after about 1 or 2 weeks iirc.
Same problem for me, but i've changed 5 diferent rom's and nothing...i will try the airdryer now

Resources