Hi all,
When I use my GPS software (Sygic Drive) my pda turns off the backlight of the screen even if the software is designed to avoid it...
Is there any way to solve this? I can disable the backlight countdown option in the settings menu, but if there is another way it could make me very happy
Thanks in advance!
Majes said:
Hi all,
When I use my GPS software (Sygic Drive) my pda turns off the backlight of the screen even if the software is designed to avoid it...
Is there any way to solve this? I can disable the backlight countdown option in the settings menu, but if there is another way it could make me very happy
Thanks in advance!
Click to expand...
Click to collapse
If your gps software can't take over Windows Settings, the only way is like you said. Turning off the option in Power Save. I don't have that problem with iGO8 when on a route. if used as Map only, showing my location, it goes off. I haven't tested Live Search or Pharos with this last build(21202). Unless one of the Registry Guru's might have a registry edit to solve your problem. Good Luck, I know your frustration. I had it with iGO8 till I found the setting to keep light on.
Related
Hi,
Sometimes my backlight does not switch on when I've pushed the on/off button for 1 sec to go out of the stand-by mode. I can see that the telephone is working but only without backlight. I don't know where I can find the settings. I'm using the Vario from T-Mobile.
Can somebady help me with this?
thank you in advance.
Regards Witte
maybe hard reset or rom update? , cant imagin what will do that unless somthing is hogging all cpu power perhaps
A reset will help but I'm not happy to update my ROM. I'm afraid for more problems.
witte_nl said:
Hi,
Sometimes my backlight does not switch on when I've pushed the on/off button for 1 sec to go out of the stand-by mode. I can see that the telephone is working but only without backlight. I don't know where I can find the settings. I'm using the Vario from T-Mobile.
Can somebady help me with this?
thank you in advance.
Regards Witte
Click to expand...
Click to collapse
Did you have the power cable in?
I have the same problem when i'm charging the phone.
When i press the power on button the light stays off.
Maybe you've got Spb GPRS Monitor installed on it?
Izzard-UK said:
Maybe you've got Spb GPRS Monitor installed on it?
Click to expand...
Click to collapse
Spb GPRS Monitor does this problem on my 9100 too, any software with SPB in the name seems quite buggy.. ;-)
OK,
right now I don't have the problem anymore but I'll will monitor it and maybe then I will uninstall the gprs monitor.
Thanks!! :lol:
witte_nl said:
OK,
right now I don't have the problem anymore but I'll will monitor it and maybe then I will uninstall the gprs monitor.
Thanks!! :lol:
Click to expand...
Click to collapse
You will.. do a search - I posted this a while back... they know about it.
Terran
MDA Backlight issue
I ran across a problem with the MDA, where I adjusted the Backlight settings. From there on the Backlight woulf not turn on unless I went to the setting control to adjust it. The fix: Go to backlight settings, set your brightness desired (maybe in the middle). Go to Battery power from the tabs that are currently listed. Make sure you have (Turn on Backlight when a button is pressed or the screen is tapped) Selected. Then press ok.
That should fix it if the issue you are experiencing is similar to mine.
I have the same problem with my artemis. And i think is from spb plus since the backlight control button from today dont even work on this new version. Or from phone profiles. Everytime i make a soft reset i have to reajust the backlight or when it turns off i have to make another soft for reajusting before it goes out. It's quite boring and i'm trying to find an app to replace spb with the close button and task button ant the today buttons shortcuts if is that the problem. And my artemis rom dont know why dont have the option on the backlight settings to turn on when screen tapped or key pressed.
Hello xda world. Like the forums... I'm new to PPC, but I've previously developed Palm apps.
I've had an x7500 for a week or so. Lots of messing around trying to get a configuration I like, and somehow I've managed to break it (maybe).
The backlight works fine - when there is no external power.
However, when external power is applied, the backlight goes to its lowest mode and will not honour the slider settings in the Backlight app.
This is really, really annoying. Any suggestions?
Is it a PPC or an HTC thing?
Thanks & regards
Devany said:
Hello xda world. Like the forums... I'm new to PPC, but I've previously developed Palm apps.
I've had an x7500 for a week or so. Lots of messing around trying to get a configuration I like, and somehow I've managed to break it (maybe).
The backlight works fine - when there is no external power.
However, when external power is applied, the backlight goes to its lowest mode and will not honour the slider settings in the Backlight app.
This is really, really annoying. Any suggestions?
Is it a PPC or an HTC thing?
Thanks & regards
Click to expand...
Click to collapse
i remember i had similar problem before, do you have Phone Alarm install?
Thanks for your help, but... nope no phone alarm.
(In the phone app right? I don't see any options for a phone alarm.)
hi Devany
not sure if you managed to find a resolution but i too had a similar problem.
i think mine was caused by phonemanager (which i have since uninstalled)
i found that when on battery power the slider in backlight settings did absolutely nothing. the only time the backlight would become brighter was when the alarm was going off.
searching throught the registry i found the solution.
navigate to HKEY_CURRENT_USER\controlpanel\backlight
change the onoffbat key to 1 (mine was set to 0)
once done press the power key down for ages to reboot.
my slider now works fine.
hope this helps
Daryl Mushtaq
Hi All...
I would like to set any program (each one i want...) not to switch off following the normal settings of my pocket pc...
Example:
When you start Tom Tom, your screen remains turned on, even if you set 1,2,3... minutes after then your screen must normally switch off...
So, i'd like a solution to set any program like TomTom and make my screen stay turned on untill i close that program.
Please can anybody help me???
I'll waiting for your solutions...
Thank you in advance!!!
Setting -> power -> advanced
and in TomTom -> Backlight on never
???
I didnt understand what you mean... The way you suggest doesnt make choose which program make my screen stay switched on or not bypassing the "normal" power settings...
I'd like to set any program (TomTom do the same thing by default!!!) deciding which one can bypass the power settings remaining with the light screen on!!!
But not all program, just the one i decide!!!
So.... i can i set my pocket pc to do this??? And how TomTom works doing this by default???
HEY?!?!
............ Really???
No one can help me??? What the...
I still waiting...
Pleeeaseeeeee!!!!!!!
No one... No one.....
SIGH.....
HELP!!!
When I run iGo8 and don't touch the screen for a minute, it seems the device acts as if it was inactive and goes into standby, then I have to turn it back on, unlock the screen and so on..
The only thing I can do right now is to turn off the power management options before launching iGo8 and putting them back on after I finished using it, but there has to be an easier way..
Can anyone help me with this please?
Thanks in advance!
hi!
start igo...--->settings--->more(little arrow on the right bottom side)--->device
there u can switch the power settings.
before u have to switch your general settings form normal to expert.
i use "always on" but then u might have an other issue...try to search for a street, your "a key" might gotta stuck.
you can fix that problem too...just search the forum.
Nevermind, I think it's solved now..
I guess I just had to post the question to be able to find the answer myself
For those who might have the same problem : there is an option for Power management, it was set on "Use Device Settings" instead of "Backlight always on"
I looked in the sys.txt and in every other option but missed that one
jayjoe030 said:
hi!
start igo...--->settings--->more(little arrow on the right bottom side)--->device
there u can switch the power settings.
before u have to switch your general settings form normal to expert.
i use "always on" but then u might have an other issue...try to search for a street, your "a key" might gotta stuck.
you can fix that problem too...just search the forum.
Click to expand...
Click to collapse
Thanks for the quick answer
I had the problem with the aaaa key yesterday but solved it thanks to this forum, so I guess my backlight was on "always on" yesterday?
I don't remember changing that one...
indeed, you have to set the backlight feature inside IGO to "Always On". but then there's another problem - IGO overrides the general backlight settings in Windows Mobile (which I set to more than 40% constant, without the automatic adjustment). I didn't manage to make IGO to not synchronize with the OS backlight settings (tried to add the line "backlight_sync_with_OS=0") but it's a no go.
Each time I launch IGO, it will limit my general backlight settings to 40% for both battery and external power.
Fatherboard said:
indeed, you have to set the backlight feature inside IGO to "Always On". but then there's another problem - IGO overrides the general backlight settings in Windows Mobile (which I set to more than 40% constant, without the automatic adjustment). I didn't manage to make IGO to not synchronize with the OS backlight settings (tried to add the line "backlight_sync_with_OS=0") but it's a no go.
Each time I launch IGO, it will limit my general backlight settings to 40% for both battery and external power.
Click to expand...
Click to collapse
It seems it did the same thing for me, except that "Automatically adjust backlight" is still activated, so the 40% Backlight adjustment shouldn't be taken into account.
Is it deactivated for you?
I deactivated the automatic adjustment in order to save some battery, and instead I've set my backlight to 50% while on battery, and 80% while using external power (in my car). I think that there's no known solution for this.
Hi,
When i had my prophet before i could run GPS Tuner (or other GPS Softwares) and turn off the screen (button on top i mean) without having any difficulties. Now with the Iolite i have the problem, that when i turn off the screen the GPS gets turned off as well (as if the thing goes into standby)..
Is there any way just to make it run the software and the GPS no matter if the screen is on or off?
Just go to task manager and add it as exclusive. However it trade off with high battery consumption rate
Or you can use attached registry change. However, I am not sure if it is working as I didn't checked it yet. Maybe you can try it and inform us, if it is working.
Nachtwind said:
Hi,
When i had my prophet before i could run GPS Tuner (or other GPS Softwares) and turn off the screen (button on top i mean) without having any difficulties. Now with the Iolite i have the problem, that when i turn off the screen the GPS gets turned off as well (as if the thing goes into standby)..
Is there any way just to make it run the software and the GPS no matter if the screen is on or off?
Click to expand...
Click to collapse
there are 2 ways which might be helpful to your problem, but i am not quite sure.
1. some nav software will provide such options that will keep screen on or turn on screen whenever instruction is comeing.
2. before you start to use nav software, go /start menu/setup/system/background light/, uncheck device off and check screen off after xx minutes.
just try, good luck!
torrentonly said:
Or you can use attached registry change. However, I am not sure if it is working as I didn't checked it yet. Maybe you can try it and inform us, if it is working.
Click to expand...
Click to collapse
What exactly does this file do? Does it keep the GPS running even if your phone is on StandBy (screen and buttons turned off)?
I'm in search of the same solution. I want to keep my GPS program running, but I want to turn the screen and buttons of, when I put it in my pocket.
Or is there a separate program which can simulate a standby?