I need some help with my tmobile wing (herald)
I installed "Eyron Hebrew" to add hebrew my phone
but once it finished installing it asked for a serial which I didn't have so I tried uninsalling but it left my device messed up I even tried to hard reset it but it didn't help
it shows a lot of letters as hebrew letters and boxes how can I fix it?
connect it to your computer via usb and simply put on another rom that should do the trick
Related
I just screwed up. had my mda compact working for 10 minitutes then I ran the wrong update and now everything is gone. when I turn it on only "Serial" or "USB" appears (depending if the usb cable is connected). have a 512 SD Card. Please help! What shoud I do? Where do I start? Thanks
Re: help! screwed up. when powering on only SERIAL or USB ap
tppp33 said:
I just screwed up. had my mda compact working for 10 minitutes then I ran the wrong update and now everything is gone. when I turn it on only "Serial" or "USB" appears (depending if the usb cable is connected). have a 512 SD Card. Please help! What shoud I do? Where do I start? Thanks
Click to expand...
Click to collapse
Do you have your original ROM backed up?
Do a soft reset and see if anything changes.
You probably need to reflash the ROM. Connect USB and run the installer.
I had the same problem :twisted: and was able to run a full upgrade trough the USB docking station. What was remarkable is that it seems that you can run apparently any OS you :lol: want because the check on what is installed leads to nothing because there is nothing to compare.
suc6
where to find the installer?
where to find the installer? - sorry I'm new to this, feel so stupid...
I had run a complte backup from active sync but don't know how to use it. I have a german t-mobile version. prefere it in english so would not mind installing the english one BUT HOW?
did a soft and a hard reset - did not help at all.
Same problem!
I was trying to upgrade the ROM using the official O2 download and got the same prob. I backed everything up using ActiveSync, but of course this doesn't run now that the XDA2 just says "Serial" or "USB" (if in the cradle) and v1.01 at the bottom of screen. Soft and Hard reset make no difference.
..more
Got it working again, by just running the O2 ROM update, with the XDA 2 in the cradle. Then, of course, to cause trouble for myself, I restored the backup. It couldn't write certain files 'cos they were in use, so I skipped them - - now its a white screen...
Guys,
I ve just downloaded this http://rapidshare.com/files/21256078..._DUT_11500.rar romversion in the understanding that it was for the HTC 9000 PDA. There was a file called MaUpgradeUt_noID.exe which I let 'upgrade' my 9000. However, I think something very VERY big went wrong! A reset by pushing the 2 buttons and reset button on the back gives me the option 0 to reset but all I can see after that is a black screen which says USB at the top and at the bottom v1.00
What happened and is this the end of my PDA? Sync won t work anymore now since my PDA can t be detected by windows because I can t get in the PDA!!!
Is there something I can do??!!!
PLEASE HELP ME OUT!!!!
Edit/Delete Message
sounds like you're just in bootloader mode
I think you are in what's called bootloader mode. Read the wiki to check - the screen you are describing sounds normal to me you plug you device into the comp via usb (with sync over usb disabled in active sync) then install a new rom.
You really shouldn't have tried to flash your rom without reading some instructions first but I think that your device should be fine.
If you have already upgraded your rom just do a hard reset and select the option to reset.
Will this thread help?
http://forum.xda-developers.com/showthread.php?t=310056
I'm sorry, this is the thread I ment to link:
http://forum.xda-developers.com/showthread.php?t=310054
strangely enough I found out that I DID use a good version picked from this http://forum.xda-developers.com/showthread.php?t=298020 post. In this thread mwang gives a link to here http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,40,30486,30486#msg-30486 where I picked the dutch version. I than double clicked the MaUpgradeUt_noID.exe file and the software for upgrading started. When he was at 100% he said the the ROM update was completed and that I had to do a reset. So, I than pushed the three buttons (2x the - button and the reset button at the back of the 9000) but all I than see is the bootloader menu with USB and V1.00...........
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
sanderh said:
Sorry for putting it in three sub forum, my fault, but the device is from my work so I don t want it to be screwed up!!!
Click to expand...
Click to collapse
Rather late now, but if it's owned by your company for work, should you really be di**ing with it?
Solution to probl: Stuck in Bootloader
The one way of fixing your problems....you're officialy stuck in bootloader,
Here's the way to fix it:
1. Stop Activesync USB connection on your machine under connection settings.
2. Uni : Reboot Bootloader then Connect USB ( If your phone isn't in bootloader already..)
3. PC : Run mtty1.42.exe ( Download from XDA's ftp site or search the forums, I'm sure you'll find it.)
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5.1 Press Enter
5.2 USB> (This will show up)
6. Type: Set 14 0
7. Press Enter
8. Run your rom update again and it should flash this time.
did it start??
did it start?? ?
Hi. first post.
Have an o2 exec. Different brand same deice and none of the other methods worked but finally got it working. Using mtty1.42.exe it would not see usb connection and therefore could not go down that route.
I booted into the bootloader mode that says serial at the top and v1.00 at the bottom.
Connected to the pc and cant remember if i stopped wcescomm.exe or not but you can try both ways.
Then started Midget_1990_v1_0_PU10_WWE.exe rom and followed the instructions and voila.
Hope this helps someone.
"Using mtty1.42.exe it would not see usb connection"
You need to disable the usb connection of active sync under connection settings and then only mtty will pick up a usb connection..
Hi
I just tried installing WM6 on my Vario and half way through the upgrade a blue screen appeared on my pc, with the machine rebooting. It now does not detect the Mobile phone, with only the splash screen of HTC appearing on the phone
What do I do? Please I need your help
Thanks
it happened to me as well. So what I did was I use my laptop. So if you have 2 computers, then you should swtich to the different one. or else, you can just hard reset the phone and then try to attach the usb again and see if it fix the problem
When I do hard reset nothing happens accept for the htc logo appearing. The computer doesn't recognise the usb on the device
There must be a way to upload a ROM to the pda to get it up and running
Any ideas?
I need help! urgently! I need to fix this phone (hw6925) and I do not know how... can anyone help me on this? It is stuck at bootloader, I tried replacing the rom but nothing... I can have access to another phone of the exact model but I dont know how to get the rom out of that... I tried getting the bin and transferring it through mtty but still I cannot get it to work... any help?
Is the bootloader stuck in Serial or USB? If Serial, take out battery, let the screen fade away until you barely see the HP logo, put battery back in along with cover, dock the PDA with power, it should change back to USB. Download the rom from HP website, 6945 should work, and flash.
Join the Club
absolutn said:
I need help! urgently! I need to fix this phone (hw6925) and I do not know how... can anyone help me on this? It is stuck at bootloader, I tried replacing the rom but nothing... I can have access to another phone of the exact model but I dont know how to get the rom out of that... I tried getting the bin and transferring it through mtty but still I cannot get it to work... any help?
Click to expand...
Click to collapse
Here is how to get it out of HP Invent Logo, G.39 .......
soft reset, do not connect yet
press ctrl, alt delete, if on xp, find process wcescomm........., end that process if it is running. plug in data cable for our $600.00 Paperweight, It should now say "USB" instead of "SERIAL" on the hw6925........, now run mtty,
change the port to that w one, you know the one one, if not its the one that does not say comm, or just click on usb to the right, if there is one, next when it opens up the new screen, it should say something like "USB>"
type, " set 14 0 "
now soft reset hw6925,
Should go back to Booting up normally, now for people like me with the "NO GSM AT Startup, we are F"C"ED
someone i change the model number on my hw6925 to a 6915, still no gsm, any of you programmers want to help us out, please do, I will be the first to donate
Hi all.
I just a got a HD2 today. And the first thing that came in my mind was "Let's go to xdaDev to get a nice custom rom". I downloaded one.
After that I put the usb and try to make it syncronize. And the problem is here : ActiveSync dont reconize the phone. I spent the last 4 hours to google why it shall not work. I tried to unstick option at "Start=>Settings=> Usb to PC" but it dont work. Nothing more after perfoming a hard reset and reinstall ActivSync.
But something is strange : When I go in the bootloader, there is the 3 color screen and the phone Display "Serial" at the bottom of the screen ; and when I start it again with USB plugged, it doesnt display "USB" instead of "Serial" it's just void and if I remove the USB "Serial" is displayed.
Plz help me to make the phone syncronize .
I use Windows XP (no firewall, no antivirus) and an official Orange Rom. My SPL is 1.42.0000. I just hope there is no hardware problem ...
Some news ...
The HD2 isnt detected on 2 other PC (Both Win XP). I managed to syncronize my old Diamond too, and it worked well. Same with a HTC Touch and a Touch Cruise, the 3 ones works.
I also tried to use Bluetooth to get an Activesync connection and this time, it noticed the HD2 but no way to get a synchronization.
Any ideas ?
Try this: goto Settings, Other (Miscellaneous settings), USB to PC, Enable faster data data synchronization. Try to tick and untick the last setting.
It doesnt work . I'm trying to follow a "GoldCard" tutorial to flash to an official HTC rom. Maybe it's Orange operator rom ... But if you have any other suggestion, let me know
I can't believe that it's such a s*** to just connect the last HTC phone to a computer. The tutorial need ActiveSync to get the SD card ID so I will not succes in this way.
Is there another software that can be used instead of ActiveSync ?
Did you flash any rom at all or are you still stock?
If you have flashed already, Have you tried to go back to the default shipped rom using sd card (not goldcard)?
Find the rom that shipped with your device, extract the RUU_Signed.nbh file from it, copy it to your fat32 formatted sd card, rename leoimg.nbh, put card in phone, boot phone with down volume held, hopefully you get the message on the three colour screen saying something like 'press volume up to start' or somesuch.
THis should not only flash the rom, but also fix spl if it has become corruptted(which appart from hardware errors is the only reason i can see that it wouldn't recognise a USB connection)
Make sure it is the correct rom for your phone, though, correct vendor and region id.
I must say if you havent flashed yet it sounds like a hardware fault with teh usb cable/connector
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Phoque_You said:
I'm currently running a stock Rom from a french operator nammed "Orange". I haven't flashed anything since ActiveSync just dont want to know anything about my HD2.
Maybe I shall send it back to the seller. That's so frustating ...
If i dont find a way to solve this problem until the end of the day, I will return the phone.
Anyway thx for trying to help me
Click to expand...
Click to collapse
Ah in that case then i'd seriously consider taking it back /sending it back. Especially if you have tried more than one computer, sounds to me like faulty cable or USB socket.
kilrah said:
To me either the cable or the phone is faulty. Try another cable if you have one, if not just have the phone exchanged.
Click to expand...
Click to collapse
You must be right. I tried everything and I never had so much pain with my others HTC to get syncronization
I had the same problem not beeing able to connect to the internet via computer. After playing with the activesync settings on the Computer -> conection settings-> ticking on and off some of the boxes->ok, it worked again.
I have connected to three of these phones ( 2 french 1 english) and no problem whatsoever, everything happens without needing to touch any of the settings...is your pc even recognising that something is being plugged in on the USB?
Have you installed the latest version of activesync?
If you have done all the obvious things and it still does not work, the phone or the cable is defective...It should connect straight out of the box with a standard, un changed version of activesync.
Send it back!