Hi, ALL!
it is possible to connect in HP iPAQ 914 any Flash Usb Drdive.
It is or is it ?
did you did it ?
what driver ?
what cable ?
Drivers are built in; you just need a mini-USB to female full-sized USB cable
i ask this question, when i connected mini USB to external HDD 2.5" and connect external USB power from my laptop.
My 914 dont recognise my external mass storage device in memory applet. and dont show any warning message or so.
roman_n1 said:
i ask this question, when i connected mini USB to external HDD 2.5" and connect external USB power from my laptop.
My 914 dont recognise my external mass storage device in memory applet. and dont show any warning message or so.
Click to expand...
Click to collapse
perhaps you need a usb host cable
i find 'mini-USB-male to full-sized-female-USB-cable'
but my 914 in memory manager don't show an additional storage (it was standart transcend 512mb flah usb drive)
it is possible to turn in registry or in somewere settings - usb mass storage in this device? that connect standart flash usb drives.
windows mobile may read and write to fat32 or ntfs file systems or both?
Sorry for OT, but I have some problem with this iPAQ. I'm trying to flash this device with the latest ROM using PC with Vista on board. After going to bootloader, installer shows message, that connection between ipaq and PC was lost. Can anyone help me? Perhaps I need some drivers to flash this PDA? When I turn BL mode, and connect to PC, Vista see it as unrecognized usb device...
USB Host
this cable MiniUSB (male) - to USB(female)
price is very low 1.5$
byt my iPAQ 914 not recognise flash usb drive in Settings-System-Memory applet.
hardware is ok. i need additional software - driver for WM6.1.
i try to install USB Host Drivers _http://forum.xda-developers.com/showthread.php?t=480899
no effect - my ipaq recognise nothing: my flash usb drive or my external hdd with additional power or any unknown device.
кому надо - есть подробно про все драйвера по-руски тут
The last wm6.5 Rom contains USB Host driver or NOT? and mini-USB can offer 5V power?
Related
hi all
i hearerd that it's possible to connect a usb hdd or usb key to the usb port of any qtek using its usb connection throught a usb hub i see thta on that page
http://www.pdagold.com/articles/detail.asp?a=220
thx for more info
This is only possible with devices that have USB host capabilities. No HTC device currently has these capabilities.
ok thanks for the reply
hi guys
i am new to this so apprecaite your help.have been using my xda exec for about a firthinte brilliantly.however since yesterday ,when i plug the usb cable to pda nothing is happening,fone is not being recognized by pc.i tried different cables and diferent pc's to no avail.the pda does not even charge via usb cable.
however it charges normally via wall charger.
do you think I bust the connector,could it be fixed?
hi heres what you can do to see it your usb still works
1. have a storage card sd/mmc if you dont have one borrow one
2. download softtick 2 from http://www.megaupload.com/?d=YPH5DW4I or wm5storage you choose
3. connect your pda with softick installed
4.press the usb option and the sd card should display as a normal flash drive
5.if the computer recognizes it and picks it up as a flash drive then you definatly know it works properly
6. if it doesn't then you can hard reset your pda
7:if that still dont work then consult a techniian or a guru to help you open it
hope this helps!
Has anyone tried to attach a USB memory stick to their Uni to read files. Is this possible?
reports are the universal dont support usb host as in it cant use any usb devices what so ever
Is it possible to boot Athena form any USB pheriperal such as a stick or a cd-rom ?
I just recieved a USB adapter that I bought from eBay ( http://www.ebay.ca/itm/200864679193?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 )
I have tried connecting a few USBs but none of them are working. It just says USB Connector connected. When i connected a logitech controller it gave me an error message that it was a high powered device. Not sure if there is something wrong with the adapter or if I need to instal additional drivers/apps to help with the mounting, or maybe change a few settings.
Can anyone verify if they can mount USBs on JB?
Sent from my GT-N8010 using xda app-developers app
Nvm, I got it to work. Found a clue on a different seller's ebay page.
All you need to do is connect the cable to your device and restart it. Once it restarts, take off the cable and connect the desired USB device and connect the cable back.
Also, make sure your USB is formatted as FAT32.
This is what I found on the web:
" By default the Android device supports the FAT32 format only. If your flash drive is in NTFS
format, it will be seen as a blank drive.
For the first time to use the OTG cable, please connect the cable with your phone and restart the
phone. (Before you use USB devices to connect your phone, please firstly connect the USB
devices with the cable, then connect your phone.)
When you need to change USB devices, please unplug the OTG cable from mobile phone firstly,
then change USB devices, and plug in your phone."