Database Users

Radio Problem !!!

--------------------------------------------------------------------------------
Hello,
i am having a frustrating problrems with my p3600
- the phone is not working ! it show that there is no singal and i can't get to the phone seetings
- i tried hard reset / soft reset / upgraded to wm6 , no difference
- tried to flash the radio , but it stops at 0% , and after one hour , it is still 0%?
please help!

Try updating to WM6 with this package:
Apoc said:
jesus, use this: http://rapidshare.com/files/2987211...y_WM6_v2.0.0.4_incl_HSPL___Radio1.41.0.11.exe
created a self-extracting archive so that you only need windows to do the upgrade(no 7zip or winrar), it should extract to a temporary folder and execute the updater, it will flash the hardspl, radio 1.41.0.11, and lsvw's 2.0.0.4.
Click to expand...
Click to collapse
Like it says, it's a total upgrade package which will also upgrade the radio, using harspl, so CID shouldn't be a problem...
Just connect to ActiveSync (preferably as a guest) and start the .exe you've just downloaded. It'll push SSPL by Des (modified bootloader) to the phone, execute it and start updating.
Let me know if this worked...

Did the upgrade and still not working ......
?

Time for a warranty repair!
Your symptoms stongly suggest a hardware fault with the Qualcomm radio chip.
Updating to the WM6 ROM's doesn't update the Radio, so you could try flashing just a Radio ROM (though by your 1st post you've already tried that?)
The instructions for LSVW and Mun-rus both state that the radio should be updated prior to applying the WM6 ROM itself.

osamanet said:
Did the upgrade and still not working ......
?
Click to expand...
Click to collapse
But did the whole upgrade process finish all well...? Is radio 1.41 installed now?
It's a bummer you still have problems, but just exclaming it's not working doesn't really help... Can you be a bit more specific please???
What went well, and what didn't, and what is the exact problem that has risen or didn't get solved? Did you get any specific error-messages? Are you in a good-coverage area? Etc,etc...
NeilM said:
Updating to the WM6 ROM's doesn't update the Radio....
Click to expand...
Click to collapse
Yes it does....the package i linked before does flash radio 1.41.

Moaske said:
Yes it does....the package i linked before does flash radio 1.41.
Click to expand...
Click to collapse
Ah- missed the significance of that one! Thanks
Problem is that this topic is split in 2 forums, so some info not consistent- his answers in the other thread stongly suggest hardware failure.

Hello,
thank you for answering
i did try all the updates in this forum , SAME PROBLEM !
when i press the green button nothing happins , when i go to Phone nothing happiens , when i go to phone settings , also nothing happiens
it used to work before , but it used to disconnect every hour or two , then it stopped working
is the device coverd by warranty in the U.S ? i bought it from eBay less than three months ago

I've no idea if it is likely to be covered- was it a new device, fully boxed?
If so, there should be an international warranty card inside, but I don't know HTC's policy on coverage in USA.
HTC's USA Home Page doesn't mention this model at all.

Touch HD is ruined, please help NOW! IMPORTANT!

My phone works perfectly except I can't answer calls, when I press answer/ignore it freezes until it goes to voicemail and then comes back. I've flashed multiple roms and had the problem with all of them. I'm not using any special themes or anything, and the only software I ever install are HD Tweak and Finger Keyboard 2.1 and my radio 1.14.25.24. Here's a list of what I've done since I had the phone:
1. Bought phone. Flashed HSPL. Flashed Laurentius L26, no problems. Was being lazy so I didn't hard reset after flashing.
2. Flashed Dutty R14. Didn't hard reset after flashing. No problems for awhile and then the problem of not being able to answer calls appeared.
3. Flashed EnergyRom wm6.5 rom. Hard reset twice after. Still having problem where I can't answer calls.
4. Flashed Dutty 3.9XT wm6.1 rom. Hard reset twice after. Still having problem where I can't answer calls.
If anyone can help me figure out why my phone is doing this I'd really appreciate it, I'll even pay you some money on PayPal if you like because I really want to fix it. Here are some ideas I had as to why it's not working:
- Problem with rom flash. No, because I tried it with 3 different roms so far and had the same problem.
- Touch HD isn't fast enough to run wm6.5 and be stable. No, because I tried it with a wm6.1 rom too and had the same problem.
- Someone suggested it might be a problem with the battery. No, because I ordered new replacement batteries and tried them and had the same problem.
- Some of the settings in HD Tweak are incompatible with something in the roms I'm using. Maybe, is this possible? I don't really change much, just the softkeys and the highlight color and things like that.
- Screwed up something in the SPL or something because I didn't hard reset after flashing the first 2 roms. Maybe, is this possible?
- Dropped my phone and somehow managed to break nothing but the mechanism involved in answering calls. Maybe, is this possible?
Today I'm going to reflash HSPL, flash the stock HTC rom, hard reset twice, and see if I still have the problem. I don't know what else to do or what other possibilities there are. If anyone can shed some light on this issue, that would be great, because I really don't want to have to buy a new phone. Thanks

Did you try another SIM?

rpimps said:
My phone works perfectly except I can't answer calls, when I press answer/ignore it freezes until it goes to voicemail and then comes back. I've flashed multiple roms and had the problem with all of them. I'm not using any special themes or anything, and the only software I ever install are HD Tweak and Finger Keyboard 2.1 and my radio 1.14.25.24. Here's a list of what I've done since I had the phone:
1. Bought phone. Flashed HSPL. Flashed Laurentius L26, no problems. Was being lazy so I didn't hard reset after flashing.
2. Flashed Dutty R14. Didn't hard reset after flashing. No problems for awhile and then the problem of not being able to answer calls appeared.
3. Flashed EnergyRom wm6.5 rom. Hard reset twice after. Still having problem where I can't answer calls.
4. Flashed Dutty 3.9XT wm6.1 rom. Hard reset twice after. Still having problem where I can't answer calls.
If anyone can help me figure out why my phone is doing this I'd really appreciate it, I'll even pay you some money on PayPal if you like because I really want to fix it. Here are some ideas I had as to why it's not working:
- Problem with rom flash. No, because I tried it with 3 different roms so far and had the same problem.
- Touch HD isn't fast enough to run wm6.5 and be stable. No, because I tried it with a wm6.1 rom too and had the same problem.
- Someone suggested it might be a problem with the battery. No, because I ordered new replacement batteries and tried them and had the same problem.
- Some of the settings in HD Tweak are incompatible with something in the roms I'm using. Maybe, is this possible? I don't really change much, just the softkeys and the highlight color and things like that.
- Screwed up something in the SPL or something because I didn't hard reset after flashing the first 2 roms. Maybe, is this possible?
- Dropped my phone and somehow managed to break nothing but the mechanism involved in answering calls. Maybe, is this possible?
Today I'm going to reflash HSPL, flash the stock HTC rom, hard reset twice, and see if I still have the problem. I don't know what else to do or what other possibilities there are. If anyone can shed some light on this issue, that would be great, because I really don't want to have to buy a new phone. Thanks
Click to expand...
Click to collapse
Hi rpimps,
I think that would be a good idea, flash back to stock, check for any differences, if everything works ok, then try flashing to a custom ROM again.
It might be an idea to try out a different radio version, for example, try 1.17 as this could improve certain built in feaures of your phone, especially since radio versions are known to work only in specific regions, it may work out better for you overall
Also, if not already cooked into the custom ROM of your choice, you should also install the RIL version that matches your radio version - 1.17 Radio supports RIL version 1.14 (1.14.25.24), which you can download the RIL via this link, at the bottom of post #1 - read this section as it also explains how to install the RIL.
I recently remember another member mention that their phone would sometimes hang when/after receiving a call, this was solved by installing the associated RIL - a layer in an operating system which provides an interface to the hardware's radio and modem.
Best regards.

Just to see if call mechansm works;
- try to record something (to check mic)
- try front speaker (i dont know how to do this)
- check if vibration works. (vibrate on connect may be on)
I guess your gsm radio works well since you can receive calls. Try to use windows original phone canvas instead of touchflo 3d. Dont know what to check more Its strange.

simplistian said:
Did you try another SIM?
Click to expand...
Click to collapse
I did that just now and it had the same problem (on the HD) no matter what sim I put in it.
Mastoid said:
Hi rpimps,
I think that would be a good idea, flash back to stock, check for any differences, if everything works ok, then try flashing to a custom ROM again.
It might be an idea to try out a different radio version, for example, try 1.17 as this could improve certain built in feaures of your phone, especially since radio versions are known to work only in specific regions, it may work out better for you overall
Also, if not already cooked into the custom ROM of your choice, you should also install the RIL version that matches your radio version - 1.17 Radio supports RIL version 1.14 (1.14.25.24), which you can download the RIL via this link, at the bottom of post #1 - read this section as it also explains how to install the RIL.
I recently remember another member mention that their phone would sometimes hang when/after receiving a call, this was solved by installing the associated RIL - a layer in an operating system which provides an interface to the hardware's radio and modem.
Best regards.
Click to expand...
Click to collapse
Here's what I did today:
1. Reflashed HSPL. Hard reset.
2. Couldn't find a working stock rom so I just reflashed Dutty 3.9XT. Hard reset.
3. Installed 1.17 radio and rilphone 1.14 like you recommended.
4. Didn't install anything else. Tested phone right after install and it's still having the problem.
barisahmet said:
Just to see if call mechansm works;
- try to record something (to check mic)
- try front speaker (i dont know how to do this)
- check if vibration works. (vibrate on connect may be on)
I guess your gsm radio works well since you can receive calls. Try to use windows original phone canvas instead of touchflo 3d. Dont know what to check more Its strange.
Click to expand...
Click to collapse
I can call other people and it works fine. And actually about 10% of the time I CAN answer calls, and when it works it works perfectly. But 90% of the time it won't let me answer.
I might just have to put this phone on ebay and go back to my Diamond

rpimps said:
I can call other people and it works fine. And actually about 10% of the time I CAN answer calls, and when it works it works perfectly. But 90% of the time it won't let me answer.
I might just have to put this phone on ebay and go back to my Diamond
Click to expand...
Click to collapse
that's a shame dude, not sure what else to suggest... it sounds like a hardware related issue as you have repeatedly tried flashing different firmware one on the phone... i suppose it's not under warranty?

Mastoid said:
that's a shame dude, not sure what else to suggest... it sounds like a hardware related issue as you have repeatedly tried flashing different firmware one on the phone... i suppose it's not under warranty?
Click to expand...
Click to collapse
It's only a few months old so it might be, but doesn't flashing spl/roms void the warranty?

rpimps said:
It's only a few months old so it might be, but doesn't flashing spl/roms void the warranty?
Click to expand...
Click to collapse
Unfortunately, it breaks the warranty aggreement. So e-bay is a good idea, I guess.
P.S: I heard from someone that you can go back to stock rom then you can still use your guarantee. But I'm not sure if they can see that you reflashed it or not.

rpimps said:
It's only a few months old so it might be, but doesn't flashing spl/roms void the warranty?
Click to expand...
Click to collapse
From what I have read, if you flash back to the exact stock ROM which was installed on your phone when you had received it, then this will not affect your warranty - if you decide to return your phone (assuming it is still under warranty) just make sure you downgrade to Stock ROM and Radio version, with no trace of HSPL or USPL also, or else you will have to pay them money if they (HTC) find out
EDIT: Please follow these steps to restore back to your stock ROM version:
1. First, be sure to restore your stock OS, and then the stock radio. The Stock SPL is always to be done last!
2. Download your choice of a stock spl package from the link shown below. (currently 1.13, 1.14, 1.15, 1.54)
3. Also download the original hardspl from the link shown below.
4. Run the hardspl exe but do not click anything in RUU yet. Just let the hardspl EXE extract the files for flashing.
5. The SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
6. Continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
7. To verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
Please refer to the following link for more information and the necessary files you will require to re-flash back to Stock (see and read the last section of post #1):
http://forum.xda-developers.com/showthread.php?t=431217
Regards.
p.s. also remember to flash back to the original Radio version of the phone, if required.

There are several stock ROMs linked in the Blackstone Wiki, flash back to one of those and see if your problem is still there. If it is, send it back for a Warranty repair - as long as there is a stock SPL and ROM image on your phone, you Warranty will be intact.

what i dont see is mention of ho u are answeing the calls.
there or at least three ways
1. the on screen prompt. i assuming this is the one that freezes
2. the answe key at the bottom left of the phone
3. the htc headphones im assuming you have
have u tried using all three of these methods to answer calls??

[Need Help]ROMs won't boot after initial setup

I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.

Ultimaex said:
I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.
Click to expand...
Click to collapse
to specify that rom you used in this moment and to specify that RADIo is used

I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.

Ultimaex said:
I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.
Click to expand...
Click to collapse
to assess that rom V.0.8 it has rom 2.0x base
radio 2,08 to enable 576 MB
the rom that it uses, it could not be compatible with the version radius
try to chnge a version radio or try to change version rom
if you use radio 2.08 from rom 2.07,try to flash rom cooked with 576 Mb enable
sorry for my poor english,i'm Italian

Sorry mate
the problem is other
I have since the rom of bob qualified V.08 is for 576 mb

You tried booting up with the SD card taken out of the device?
WB

You need to have a radio that supports the 576 mb. But I don't think this is your problem. It sound like to me your storage card is the problem. If you have another storage card format it to FAT 32 and try again. I bet your problem is solved. Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.

I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.

Ultimaex said:
I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.
Click to expand...
Click to collapse
have you try flash rom with activeSync???

Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?

bobsbbq said:
Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?
Click to expand...
Click to collapse
Everything flashes as usual. HSPL, Radio and ROMs. The software just isnt running stable after flash.
If it would be a Radio/SPL/ROM problem the stock rom should fix it.

Not wanting to be the one to say it but maybe your device is defective or damaged. Or maybe the problem was caused ny the failure going to sleep, but I don't think so. I have accidentally unplugged mine before during flash and still got it back. If you reflash the ROM it should work again. If you don't have any luck I would flash back to the Stock ROM and take it in for repair.

To bad noone can help. I will do some research and if i have no success i will send it back.
Some weeks of waiting

bobsbbq said:
Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.
Click to expand...
Click to collapse
Any sources for that?
I never read anything backing this up.

pathologo said:
Any sources for that?
I never read anything backing this up.
Click to expand...
Click to collapse
Yes there have been many. There have been some in my threads. There is also a thread posted here with lots of discussions and it was determined the the lock ups and freezes with Manila 19222911 was the 16gb cards. It seems there was only one ROM that did not have the problem and unfortunately this cook doesn't share with others.

im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically

Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
So the stock ROM is working then.

Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
try using the energy Rom...it works for me...all i can say, it's more stable than any other roms that i use before....

bobsbbq said:
So the stock ROM is working then.
Click to expand...
Click to collapse
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.

Ultimaex said:
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.
Click to expand...
Click to collapse
I guess I don't understand. You have to have a working ROM to install a program? For a stock ROM you should not have to install anything. It either works or it doesn't.

Every flashed ROM freezes my phone...

I'm not a complete numpty at this as have for years been flashing my HTC devices.
However with my HD2, everytime I flash my device, I cannot make a call. It connects but there's no-one one can hear me. When I end the call the whole screen freezes and I have to take the battery out and turn on again.
If I flash back to the original LEO Rom the problem goes away.
Wierd. Any ideas please?

Are you doing a hard-reset after flashing? This means holding the volume up key and the power button at the same time until you get the message asking for confirming of a hard reset.

No - I didnt.
Doing that now. Hope the answers that easy!

I had similar problems and turned out this was it. I was doing a soft-reset instead of the required hard-reset.

Didnt work. Still the same...
Has the radio got anything to do with this?
If it helps, I did HSPL successfully and installed (independantly) radio 2.09.51.03 from HTC (not TMOUS - not that I know what that means )

jamesbond_28_007 said:
Didnt work. Still the same...
Has the radio got anything to do with this?
If it helps, I did HSPL successfully and installed (independantly) radio 2.09.51.03 from HTC (not TMOUS - not that I know what that means )
Click to expand...
Click to collapse
Yes,
In a lot of cases the Radio you use is very important. A lot of custom roms in particular require specific radios in order to allow for the 575mb ram hack. If the correct radio is not present it usually results in the phone hanging on the white HTC screen, not starting, constantly rebooting etc... Whichever rom you're using check back in that thread to see if it requires a specific radio, if it does then flash it by restarting the phone while holding the volume button in the down position (the bottom of the button) to get it into bootloader then connect the USB cable and link the phone with your PC and put the correct radio on from there.

gargon01 said:
Yes,
In a lot of cases the Radio you use is very important. A lot of custom roms in particular require specific radios in order to allow for the 575mb ram hack. If the correct radio is not present it usually results in the phone hanging on the white HTC screen, not starting, constantly rebooting etc... Whichever rom you're using check back in that thread to see if it requires a specific radio, if it does then flash it by restaring the phone while holding the volume button in the down position (the bottom of the button) to get it into bootloader then connect the USB cable to your PC and putting the correct radio on from there.
Click to expand...
Click to collapse
Would you mind suggesting a ROM with the specific Radio you know will work. I can then rule out my 'interpretation' error! Would appreciate it.

also...is the radio sometimes built in to the ROM?

jamesbond_28_007 said:
also...is the radio sometimes built in to the ROM?
Click to expand...
Click to collapse
usually just standard ROMS, not cooked ones.

hesian said:
usually just standard ROMS, not cooked ones.
Click to expand...
Click to collapse
OK, well using your post, I'm going to flash your 2.08.50.08 radio then the Energy series 23554. That should work right...

it did for me tho now i am on TOUCH_X_TREME_23554_EURO_2_30_5_54

jamesbond_28_007 said:
OK, well using your post, I'm going to flash your 2.08.50.08 radio then the Energy series 23554. That should work right...
Click to expand...
Click to collapse
yeah it should, i had a 2.07.51 radio rom on my HD2 when i tried the energy rom out first and same result as you. Did some digging about it and found that Energy rom only works with 2.08.50 radio, so flash it and you will be fine.

dkwolf said:
yeah it should, i had a 2.07.51 radio rom on my HD2 when i tried the energy rom out first and same result as you. Did some digging about it and found that Energy rom only works with 2.08.50 radio, so flash it and you will be fine.
Click to expand...
Click to collapse
OK, well thats 2.08.50 onboard. Now for Energy 23554 Apr 01.7z

HTC 1.66 ROM help?

hi all, i have a HTC HD2 on t-mobile UK and want to update my rom to 1.66 official in order to be able to use HTC messaging (currently disabled it due to known faults)
if it is possible could someone reply with instructions to how to do this and links to the ROM and any new radio i may need to install/flash with.
i have only flashed a phone once, my old T-Mobile MDA compact IV.
this would be so appreciated
p.s i cant downlload the rom from the site because my serial isnt accepted by htc

1 get HSPL2, run HSPL2, choose 1.66.hspl
2 get 1.66 wwe rom HERE - first post first link 1.66 folder.
3 using usb, run the 1.66 exe you just downloaded.
simple, eh?

Hello,
I have a little problem after flashing the 1.66 ROM for my region (east europe). The initial setup of the phone didn't start and the first screen of this setup it is showing only when I switch off the phone.
Other than that the phone works normally, but I want to get rid of the iitial setup screen when I turn my phone off. Do you know if there is a way to start the initial setup manually?
I tried flashing through the SD card and also through the PC, but the initial setup won't start.
Any advice will be appreciated.
Thank you!

samsamuel said:
1 get HSPL2, run HSPL2, choose 1.66.hspl
2 get 1.66 wwe rom HERE - first post first link 1.66 folder.
3 using usb, run the 1.66 exe you just downloaded.
simple, eh?
Click to expand...
Click to collapse
thanks for your help mate, downloaded the HSPL but when i follow the rom to the 1.66 folder there are 2 WWE 1.66 files. the first one has not many downloads and the other has 1000+ downloads. which one do i download as the file names are very similar but not the same

these two?
RUU_Leo_HTC_WWE_1.66.405.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.0 7U_2.06.51.07_Ship.exe
I dont know what crc signed means, but the first one (40 or so downloads) has a later radio version, and if you look it was uploaded later than the other.
To be honest, it doesnt matter which you flash, i suspect, because
1 - hspl is protecting your phone against bad flashes over usb,
2 - you can change the radios independantly anyway, so if you want to play safe, go for the high download one, and then update the radio manually.
EDIT - PS, anyone that does know what crc signed means, plz let me know.

okay cheers mate tbh i only want to update it so i can use HTC messaging, which does work on 1.66 rom?

jonyid said:
okay cheers mate tbh i only want to update it so i can use HTC messaging, which does work on 1.66 rom?
Click to expand...
Click to collapse
sorry, no idea, i went from stock 1.43 straight to cooked 2.x roms. Never looked back. (if ya hspl'ing anyway, then why not enjoy the candy store? )

savagemari said:
Hello,
I have a little problem after flashing the 1.66 ROM for my region (east europe). The initial setup of the phone didn't start and the first screen of this setup it is showing only when I switch off the phone.
Other than that the phone works normally, but I want to get rid of the iitial setup screen when I turn my phone off. Do you know if there is a way to start the initial setup manually?
I tried flashing through the SD card and also through the PC, but the initial setup won't start.
Any advice will be appreciated.
Thank you!
Click to expand...
Click to collapse
When I had this problem, I think I just opened the notifications bar and went into the phone setting where you can choose whether you want wifi on or bluetooth or put the phone in flight mode.
After that it seemed to go into the set up.
Im going by memory so this might not be it for you, I actually gave up and went onto energy rom.

wotsreallygood said:
When I had this problem, I think I just opened the notifications bar and went into the phone setting where you can choose whether you want wifi on or bluetooth or put the phone in flight mode.
After that it seemed to go into the set up.
Im going by memory so this might not be it for you, I actually gave up and went onto energy rom.
Click to expand...
Click to collapse
yea you are correct, that usually does it.