Database Users

Touch HD is ruined, please help NOW! IMPORTANT!

My phone works perfectly except I can't answer calls, when I press answer/ignore it freezes until it goes to voicemail and then comes back. I've flashed multiple roms and had the problem with all of them. I'm not using any special themes or anything, and the only software I ever install are HD Tweak and Finger Keyboard 2.1 and my radio 1.14.25.24. Here's a list of what I've done since I had the phone:
1. Bought phone. Flashed HSPL. Flashed Laurentius L26, no problems. Was being lazy so I didn't hard reset after flashing.
2. Flashed Dutty R14. Didn't hard reset after flashing. No problems for awhile and then the problem of not being able to answer calls appeared.
3. Flashed EnergyRom wm6.5 rom. Hard reset twice after. Still having problem where I can't answer calls.
4. Flashed Dutty 3.9XT wm6.1 rom. Hard reset twice after. Still having problem where I can't answer calls.
If anyone can help me figure out why my phone is doing this I'd really appreciate it, I'll even pay you some money on PayPal if you like because I really want to fix it. Here are some ideas I had as to why it's not working:
- Problem with rom flash. No, because I tried it with 3 different roms so far and had the same problem.
- Touch HD isn't fast enough to run wm6.5 and be stable. No, because I tried it with a wm6.1 rom too and had the same problem.
- Someone suggested it might be a problem with the battery. No, because I ordered new replacement batteries and tried them and had the same problem.
- Some of the settings in HD Tweak are incompatible with something in the roms I'm using. Maybe, is this possible? I don't really change much, just the softkeys and the highlight color and things like that.
- Screwed up something in the SPL or something because I didn't hard reset after flashing the first 2 roms. Maybe, is this possible?
- Dropped my phone and somehow managed to break nothing but the mechanism involved in answering calls. Maybe, is this possible?
Today I'm going to reflash HSPL, flash the stock HTC rom, hard reset twice, and see if I still have the problem. I don't know what else to do or what other possibilities there are. If anyone can shed some light on this issue, that would be great, because I really don't want to have to buy a new phone. Thanks

Did you try another SIM?

rpimps said:
My phone works perfectly except I can't answer calls, when I press answer/ignore it freezes until it goes to voicemail and then comes back. I've flashed multiple roms and had the problem with all of them. I'm not using any special themes or anything, and the only software I ever install are HD Tweak and Finger Keyboard 2.1 and my radio 1.14.25.24. Here's a list of what I've done since I had the phone:
1. Bought phone. Flashed HSPL. Flashed Laurentius L26, no problems. Was being lazy so I didn't hard reset after flashing.
2. Flashed Dutty R14. Didn't hard reset after flashing. No problems for awhile and then the problem of not being able to answer calls appeared.
3. Flashed EnergyRom wm6.5 rom. Hard reset twice after. Still having problem where I can't answer calls.
4. Flashed Dutty 3.9XT wm6.1 rom. Hard reset twice after. Still having problem where I can't answer calls.
If anyone can help me figure out why my phone is doing this I'd really appreciate it, I'll even pay you some money on PayPal if you like because I really want to fix it. Here are some ideas I had as to why it's not working:
- Problem with rom flash. No, because I tried it with 3 different roms so far and had the same problem.
- Touch HD isn't fast enough to run wm6.5 and be stable. No, because I tried it with a wm6.1 rom too and had the same problem.
- Someone suggested it might be a problem with the battery. No, because I ordered new replacement batteries and tried them and had the same problem.
- Some of the settings in HD Tweak are incompatible with something in the roms I'm using. Maybe, is this possible? I don't really change much, just the softkeys and the highlight color and things like that.
- Screwed up something in the SPL or something because I didn't hard reset after flashing the first 2 roms. Maybe, is this possible?
- Dropped my phone and somehow managed to break nothing but the mechanism involved in answering calls. Maybe, is this possible?
Today I'm going to reflash HSPL, flash the stock HTC rom, hard reset twice, and see if I still have the problem. I don't know what else to do or what other possibilities there are. If anyone can shed some light on this issue, that would be great, because I really don't want to have to buy a new phone. Thanks
Click to expand...
Click to collapse
Hi rpimps,
I think that would be a good idea, flash back to stock, check for any differences, if everything works ok, then try flashing to a custom ROM again.
It might be an idea to try out a different radio version, for example, try 1.17 as this could improve certain built in feaures of your phone, especially since radio versions are known to work only in specific regions, it may work out better for you overall
Also, if not already cooked into the custom ROM of your choice, you should also install the RIL version that matches your radio version - 1.17 Radio supports RIL version 1.14 (1.14.25.24), which you can download the RIL via this link, at the bottom of post #1 - read this section as it also explains how to install the RIL.
I recently remember another member mention that their phone would sometimes hang when/after receiving a call, this was solved by installing the associated RIL - a layer in an operating system which provides an interface to the hardware's radio and modem.
Best regards.

Just to see if call mechansm works;
- try to record something (to check mic)
- try front speaker (i dont know how to do this)
- check if vibration works. (vibrate on connect may be on)
I guess your gsm radio works well since you can receive calls. Try to use windows original phone canvas instead of touchflo 3d. Dont know what to check more Its strange.

simplistian said:
Did you try another SIM?
Click to expand...
Click to collapse
I did that just now and it had the same problem (on the HD) no matter what sim I put in it.
Mastoid said:
Hi rpimps,
I think that would be a good idea, flash back to stock, check for any differences, if everything works ok, then try flashing to a custom ROM again.
It might be an idea to try out a different radio version, for example, try 1.17 as this could improve certain built in feaures of your phone, especially since radio versions are known to work only in specific regions, it may work out better for you overall
Also, if not already cooked into the custom ROM of your choice, you should also install the RIL version that matches your radio version - 1.17 Radio supports RIL version 1.14 (1.14.25.24), which you can download the RIL via this link, at the bottom of post #1 - read this section as it also explains how to install the RIL.
I recently remember another member mention that their phone would sometimes hang when/after receiving a call, this was solved by installing the associated RIL - a layer in an operating system which provides an interface to the hardware's radio and modem.
Best regards.
Click to expand...
Click to collapse
Here's what I did today:
1. Reflashed HSPL. Hard reset.
2. Couldn't find a working stock rom so I just reflashed Dutty 3.9XT. Hard reset.
3. Installed 1.17 radio and rilphone 1.14 like you recommended.
4. Didn't install anything else. Tested phone right after install and it's still having the problem.
barisahmet said:
Just to see if call mechansm works;
- try to record something (to check mic)
- try front speaker (i dont know how to do this)
- check if vibration works. (vibrate on connect may be on)
I guess your gsm radio works well since you can receive calls. Try to use windows original phone canvas instead of touchflo 3d. Dont know what to check more Its strange.
Click to expand...
Click to collapse
I can call other people and it works fine. And actually about 10% of the time I CAN answer calls, and when it works it works perfectly. But 90% of the time it won't let me answer.
I might just have to put this phone on ebay and go back to my Diamond

rpimps said:
I can call other people and it works fine. And actually about 10% of the time I CAN answer calls, and when it works it works perfectly. But 90% of the time it won't let me answer.
I might just have to put this phone on ebay and go back to my Diamond
Click to expand...
Click to collapse
that's a shame dude, not sure what else to suggest... it sounds like a hardware related issue as you have repeatedly tried flashing different firmware one on the phone... i suppose it's not under warranty?

Mastoid said:
that's a shame dude, not sure what else to suggest... it sounds like a hardware related issue as you have repeatedly tried flashing different firmware one on the phone... i suppose it's not under warranty?
Click to expand...
Click to collapse
It's only a few months old so it might be, but doesn't flashing spl/roms void the warranty?

rpimps said:
It's only a few months old so it might be, but doesn't flashing spl/roms void the warranty?
Click to expand...
Click to collapse
Unfortunately, it breaks the warranty aggreement. So e-bay is a good idea, I guess.
P.S: I heard from someone that you can go back to stock rom then you can still use your guarantee. But I'm not sure if they can see that you reflashed it or not.

rpimps said:
It's only a few months old so it might be, but doesn't flashing spl/roms void the warranty?
Click to expand...
Click to collapse
From what I have read, if you flash back to the exact stock ROM which was installed on your phone when you had received it, then this will not affect your warranty - if you decide to return your phone (assuming it is still under warranty) just make sure you downgrade to Stock ROM and Radio version, with no trace of HSPL or USPL also, or else you will have to pay them money if they (HTC) find out
EDIT: Please follow these steps to restore back to your stock ROM version:
1. First, be sure to restore your stock OS, and then the stock radio. The Stock SPL is always to be done last!
2. Download your choice of a stock spl package from the link shown below. (currently 1.13, 1.14, 1.15, 1.54)
3. Also download the original hardspl from the link shown below.
4. Run the hardspl exe but do not click anything in RUU yet. Just let the hardspl EXE extract the files for flashing.
5. The SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
6. Continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
7. To verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
Please refer to the following link for more information and the necessary files you will require to re-flash back to Stock (see and read the last section of post #1):
http://forum.xda-developers.com/showthread.php?t=431217
Regards.
p.s. also remember to flash back to the original Radio version of the phone, if required.

There are several stock ROMs linked in the Blackstone Wiki, flash back to one of those and see if your problem is still there. If it is, send it back for a Warranty repair - as long as there is a stock SPL and ROM image on your phone, you Warranty will be intact.

what i dont see is mention of ho u are answeing the calls.
there or at least three ways
1. the on screen prompt. i assuming this is the one that freezes
2. the answe key at the bottom left of the phone
3. the htc headphones im assuming you have
have u tried using all three of these methods to answer calls??

[Need Help]ROMs won't boot after initial setup

I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.

Ultimaex said:
I hope someone here can help me to make my LEO work again.
Im having huge problems with my HD2 after flashing a ROM with Extendir. While setting up the device with Preset Installer my PDA went to deep sleep and failed installing all cabs.
After reboot it hung on the screen where Radio Version etc. is shown. That is why i made another Hard Reset. That let my phone boot again but after initial setup it hangs again at that place.
I tried another ROM and experienced the same problem. After that i went back to shiped with spl and radio. Not even that fixed the problem.
I tried MTTY with task 29 and reflash stock. It stays the same! After initial setup my phone sometimes hangs before or after boot animation. sometimes it boots till sense is started and hangs there.
Does anyone have a smart idea how i can make my leo run propper again?
Thanks for help.
edit: im not sure if its Extendir. It could be something else, too. I tried flashing via usb and storage card.
Click to expand...
Click to collapse
to specify that rom you used in this moment and to specify that RADIo is used

I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.

Ultimaex said:
I used the Lost in Asia Regular Version V0.8 and Radio 2.08.50.05 and HSPL.
At the moment i have a lover Radio version.
Click to expand...
Click to collapse
to assess that rom V.0.8 it has rom 2.0x base
radio 2,08 to enable 576 MB
the rom that it uses, it could not be compatible with the version radius
try to chnge a version radio or try to change version rom
if you use radio 2.08 from rom 2.07,try to flash rom cooked with 576 Mb enable
sorry for my poor english,i'm Italian

Sorry mate
the problem is other
I have since the rom of bob qualified V.08 is for 576 mb

You tried booting up with the SD card taken out of the device?
WB

You need to have a radio that supports the 576 mb. But I don't think this is your problem. It sound like to me your storage card is the problem. If you have another storage card format it to FAT 32 and try again. I bet your problem is solved. Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.

I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.

Ultimaex said:
I dont have a Storage Card inserted now. Still the same problem
Btw. Using Laurentius V1.2 now. Same error here. i try to flash a lower Radio now.
As i said before i flashed stock 1.66 via storage card with radio and spl and still had the same Problem.
Click to expand...
Click to collapse
have you try flash rom with activeSync???

Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?

bobsbbq said:
Are you able to flash HSPL again? Can you confirm on the Tri Color screen it says HSPL 1.42?
Click to expand...
Click to collapse
Everything flashes as usual. HSPL, Radio and ROMs. The software just isnt running stable after flash.
If it would be a Radio/SPL/ROM problem the stock rom should fix it.

Not wanting to be the one to say it but maybe your device is defective or damaged. Or maybe the problem was caused ny the failure going to sleep, but I don't think so. I have accidentally unplugged mine before during flash and still got it back. If you reflash the ROM it should work again. If you don't have any luck I would flash back to the Stock ROM and take it in for repair.

To bad noone can help. I will do some research and if i have no success i will send it back.
Some weeks of waiting

bobsbbq said:
Also Don't use a 16gb card until you know for sure it is working. Even then there are problem with some people using them.
Click to expand...
Click to collapse
Any sources for that?
I never read anything backing this up.

pathologo said:
Any sources for that?
I never read anything backing this up.
Click to expand...
Click to collapse
Yes there have been many. There have been some in my threads. There is also a thread posted here with lots of discussions and it was determined the the lock ups and freezes with Manila 19222911 was the 16gb cards. It seems there was only one ROM that did not have the problem and unfortunately this cook doesn't share with others.

im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically

Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
So the stock ROM is working then.

Ultimaex said:
im making improvements. after flashing stock i found out that i can change more and more settings and install programs without the need to hard reset. when i damage the filesystem with a program or setting i hardreset the device. after restart i can install that program without problems and can try another one.
seems that my device is repairing magically
Click to expand...
Click to collapse
try using the energy Rom...it works for me...all i can say, it's more stable than any other roms that i use before....

bobsbbq said:
So the stock ROM is working then.
Click to expand...
Click to collapse
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.

Ultimaex said:
I think you didn't understand. after EACH program or setting i need to hardreset.
after hardreset i can install that program as usual as all programs i did that with before.
sseems that i 'gain' more and more storage back.
Click to expand...
Click to collapse
I guess I don't understand. You have to have a working ROM to install a program? For a stock ROM you should not have to install anything. It either works or it doesn't.

HD2 stuck at white bootscreen

Hello,
I bought HD2 just yesterday, probably as every member of xda, i tried flashing it. No problem, i tried several ROMs and as far as i remember - after flash it got stuck at white bootscreen with green HTC (i found several threads dealing with this problem, but most of the people had written there ROM, RADIO, .. in the left corner - I dont have this written) So I tried to flash the phone from the SD with stock rom, nothing has changed, I tried taking out the sd & sim card. I tried hardresetting device few times and I got no more ideas.
Do you have any ideas?
Thanks in advance!!!
Filip
Edit 1: In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Edit 2: For now I have HSPL in the phone.

sounds like a missmatched rom and radio. once they are both flashed correctly it will boot. (example, a rom based on 2.10 rom will require a radio of around 2.06 or better to boot.)
edit - just seen you flashed with a stock rom from sd card, can you boot to bootloader? (press and hold vol down, tap power on)
dont worry about
In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Click to expand...
Click to collapse
for now

Felipe404 said:
Hello,
I bought HD2 just yesterday, probably as every member of xda, i tried flashing it. No problem, i tried several ROMs and as far as i remember - after flash it got stuck at white bootscreen with green HTC ...
Edit 1: In the PDA Phone Rom update utility I cannot see the old version of ROM & Radio..
Click to expand...
Click to collapse
I had exactly the same problem several days ago. After exchanging several ROMs, I got stuck at very first white screen with a green banner, but before it even showed the ROM and radio versions on it. And it happen after the ROM flush finished successfully. I also tried to hard reset it a couple of times.
But after that I used a gold card with 1.61 WWE ROM on it that I still have from the time when the HSPL wasn't developed yet.
During the flash from the gold card it waited at first and shown a some kind of error or warning grey exclamation sigh in a triangle, but just for a split second. After that it returned to continue flushing. I think it took twice as long as it should be, but as it finished, I was able to boot, hard reset and re-flash to the stock ROM 1.66 WWE, the usual way through the USB cable.

samsamuel: I can get with no problem to bootloader, could you send me exact link of the rom and radio that work together? And how come, that everytime I connect the phone to charger, it starts up?
mikiort: I havent ever used goldcard, havent ever heard of it better to say..
thanks for your help, guys, really appreciate it!!!

Since you have HSPL stil on your phone
(SPL 1.42.HSPL and not 1.42.0000) you are happy. Flash a stock rom from USB, lets say a 1.66 wwe rom, and if it still wont boot, go to teh radio roms thread, pick a low radio, (the 1.61 for instance) flash that, and you should have a working phone.

yeah, right now im flashin 1.66 WWE but it stopped and 99%... waaa im gettin nervous ok i will try and let you know

Ok, flashed 1.66 WWE but nothing has changed, im about to flash radio.

Flashed Radio 1.61 "Leo_RADIO_15.30.50.07U_2.06.51.07.nbh.7z" and still nothing... Oh!!! do you have any other ideas? Or should i again try to flash from SD official ROM?

Felipe404 said:
Flashed Radio 1.61 "Leo_RADIO_15.30.50.07U_2.06.51.07.nbh.7z" and still nothing... Oh!!! do you have any other ideas? Or should i again try to flash from SD official ROM?
Click to expand...
Click to collapse
hmm, sorry to hear that. i'd maybe consider flashing stock from sd card, but you need to be sure you have teh correct stock rom for your phone provider and region.
Be warned, this will remove HSPL, if you do not have the correct stock rom, it wont work.

Yea, i did that once already with 1.48 WWE Eastern Europe, it worked (it didnt show the triangle sign) but it didnt help, now im trying to flash 1.43 but im not expecting anything good

Done, nothing helps ... Now i have SPL 1.42000 so i can get the HSPL but as far as it doesnt help i dont know what to do...

Felipe404 said:
Done, nothing helps ... Now i have SPL 1.42000 so i can get the HSPL but as far as it doesnt help i dont know what to do...
Click to expand...
Click to collapse
Ok, if you have 1.42.0000 you need to redo the hspl flash. Once the spl is 1.42.hspl you can then flash to the rom of your choice. Which rom were you trying?
Many of the new roms require you to flash to a new radio at least 2.06 and most recently to 2.08 PRIOR to flashing the rom and if you don't the rom does not boot up and gets stuck on the white HTC screen.

really noob question, but anyways... do you firstly flash the rom and than the radio?
and to those ROMs.. i tried duffys, energy and one more i cant remember right now.. Im trying to HSPL and than flash from Vista computer, not XP...

Felipe404 said:
really noob question, but anyways... do you firstly flash the rom and than the radio?
and to those ROMs.. i tried duffys, energy and one more i cant remember right now.. Im trying to HSPL and than flash from Vista computer, not XP...
Click to expand...
Click to collapse
For these newer roms you need to flash the radio first and then the rom, otherwise the rom doesn't boot up and gets stuck on the white screen.

If you are flashing a newer ROM based on the new TMOUS ROM I would flash the 2.08.50.08.03 Radio, then the ROM. Make sure you have HSPL 1.42 first.

Ok, I do have SPL-1.42.HSPL CotullaHSPL there... now if possible tell me the "for sure" working combination... Btw, i remember how did it happen, i flashed dutty's rom and wifi was not working (option in communications couldnt be turned on/off was grey) and so i tried to flash there other rom.. and it got into problems..

Felipe404 said:
(option in communications couldnt be turned on/off was grey)
Click to expand...
Click to collapse
thats usually means you have the phone on usb connected to the computer.

Felipe404 said:
Ok, I do have SPL-1.42.HSPL CotullaHSPL there... now if possible tell me the "for sure" working combination... Btw, i remember how did it happen, i flashed dutty's rom and wifi was not working (option in communications couldnt be turned on/off was grey) and so i tried to flash there other rom.. and it got into problems..
Click to expand...
Click to collapse
I'm currently using the latest NRG rom (link in my signature) with the 2.08.50.08 radio and that works. Just as I said, flash the radio first and then the rom. The Dutty rom should also work the same way though so the choice is still yours.

OK so here i come, i flashed there firstly the radio Leo_RADIO_15.34.50.07U_2.08.50.05, then Dutty's ROM Duttys Leo HG V1 5.2.21892 but nothing has changed.. I think the device is ready to be sent to HTC, what do you guys think?

Felipe404 said:
OK so here i come, i flashed there firstly the radio Leo_RADIO_15.34.50.07U_2.08.50.05, then Dutty's ROM Duttys Leo HG V1 5.2.21892 but nothing has changed.. I think the device is ready to be sent to HTC, what do you guys think?
Click to expand...
Click to collapse
What did you do to flash the radio? Please explain how you did it.

Leo isn't boot up AGAIN.

Hi everyone,
I 've got a problem with my new HD2. I applied HSPL, then ENERGY rom. Everything worked flawlessly. The problem is that everytime my leo turns off (no matter if it's restarted or normally turned off), i doesn't boot up. All I see is white screen with HTC logo WITHOUT those red letters. No matter how long I wait, it doesn't turn on. The only way to get it to work is hard reset.
All situation has repeated several times. Flashed it again and again with Energy rom, tried even to reapply HSPL.
Then I went back to standard SPL(1.42) and tried to flash Energy with SSPL. Problem occured again.
Now it have official rom (1.66) and everything works fine.
Is there any solution to have custom rom on it now?

What radio do you have on your device? check the thread for your custom ROM and make sure you have the right radio, there will always be a recommendation.

try changing the rom too

I've got 2.07.51. In the Energy rom thread is recommendation for 2.07.50. Is it really such a big difference that it can be the cause of problem?

Yes, flash 2.07.50 and it works (and better do some reading before you flash anything)

is that rom supposed to unlock the 576 meg ram? because with the 2.07.51 radio that is impossible. ..51.. radios cannot unlock teh ram.
If that rom is expecting to have 576 available, and the radio is blocking it, then that is your problem.
Flash a ..50.. radio, and i bet it works.

EnergyROMs use base ROM 2.10 and NRGZ wrote in post 2:
BEFORE YOU DOWNLOAD AND FLASH THIS ROM, MAKE SURE YOUR RADIO VERSION IS AT LEAST 2.07.50 (not 51!) , OR YOUR PHONE WILL NOT BOOTUP AFTER YOU FLASH !

Hello, I made this thread from Nikikin's account.
Yeah, there was something strange with amount of ram memory (~300-400), so probably you're right and the problem is caused by wrong radio. My fault, I overlooked the note about radio version. Luckily... nothing bad happened.
Leo isn't mine, I don't have it with me now, so I'll do it again tomorrow and post if everything is alright.

woohoo! i knew it was cos of that glad we could help!

Just as I expected, everything now works flawlessly
Thanks guys!

[Q] Newb question about hd2 and android....

I have sucessfully installed MAGLDR 1.10 and flashed CyanogenMod7_v.2.6_NAND_A2SD to my HTC HD2. The phone works 100% Appz/ voice calls/ messaging/ internet/ videos/ Nothing was wrong for about 1 week. Now my phone cannot make any Voice calls and I get terrible T-mobile signal where I usually get all bars Full. When I try to make voice calls it would connect to the other person I am trying to talk to but I cannot hear them and they cannot hear me. Then the phone gives me an error code. Something like Process.Kernal.Droid Not responding would you like to close? But Everything else works except voice calls.
Is there something I did wrong? How do I fix this? My brother told me I need to install a new radio. So does anyone know how to install a new radio?? How do I do it and where do i find one?

Flash a new rom, that rom is full of bugs, happen the same to me.
Sent from my HTC HD2 using XDA App

you shoud be posting this in the rom creators thread

pentiumtu said:
So does anyone know how to install a new radio?? How do I do it and where do i find one?
Click to expand...
Click to collapse
You can get radios over on the WM6.5 ROM development forum (or click the radio link in my signature ). Switch phone off, hold vol down and switch phone on - you will boot into bootloader mode. Connect to pc and when usb shows on phone screen flash the radio as you would flash a winmo rom.

ClydeB1 said:
You can get radios over on the WM6.5 ROM development forum (or click the radio link in my signature ). Switch phone off, hold vol down and switch phone on - you will boot into bootloader mode. Connect to pc and when usb shows on phone screen flash the radio as you would flash a winmo rom.
Click to expand...
Click to collapse
Can I do this after I have already flashed my NAND Android ROM? In other words, will flashing a new radio destroy an Android ROM? In other, other words, if I flash a new radio, will I have to re-install my NAND Android ROM? TIA!

-Trew said:
Can I do this after I have already flashed my NAND ROM? In other words, will flashing a new radio destroy a ROM? In other, other words, if I flash a new radio, will I have to re-install my NAND ROM? TIA!
Click to expand...
Click to collapse
No, it will have no impact on the NAND rom or magldr. Just go to bootloader, flash the rom and then the phone will reboot and boot back to your Android rom. Just make sure that you flash a radio with a 50 in the naming convention (not 51) and it must be at least 2.08.50.xx or higher.