MDA Compact doesnt start and flashing problems - JAM, MDA Compact, S100 General

Hi
i have a Problem with flashing my MDA Compact!! I install the unlock tool from this forum but the MDA give me an error message.
I reset them but after that the MDA starts but i allways musst set up again.
The T-Mobile software get install after that.
When it finished the bootloader start. (If the USB cabel is conected they show USB and the Version v1.02 if not Serial and v1.02)
I use a ROM and want to install but they show ERROR 150 or that the image isn t for your mobile device.
The PC install the USB drivers but it doesnt show in Explorer and the Mobile device center also not connect.
Now I get them start I open the Battery Case when he install the T-Mobile software after set up.
But I can t install a new ROM the orginal Win Mobile 5 update cant install he give the error 101 no connection. The Bootloader is open but no connection is establish
My operating system is Win Vista. PLEASE HELP ME!!!!!

Are you sure you have a MDA Compact I? There is no WM5 for MDA Compact (Magician), but only for MDA Compact II (Charmer)! Unfortunately, both devices look the same!!

Related

Big problema, cannot update...help

hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!

HELP

Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!
Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael
Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.
And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!
Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.
Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael

S200 dead, ROM Update failed

hi
i have a QTEK S200. Today i tried to update my ppc with a WM6 version, but after 40min. the upgrade program crashed down.
After this it was impossible to enter in the main menu of the ppc. the ppc remains hanging on the QTEK screen. I've tried to enter in the bootloader with the color screen, to connect the ppc with my usb cable an the notebook, but my notebook does'nt find my ppc. And now the battery is empty (even connected with the usb cable on a working pc) and i can't switch on my ppc.
Any solutions?
Charge your Batterie and make Hard Reset. Charge VIA Caddy.
done. but the screen remains on the QTEK start page. Bootloader is possible and i get the 3-color screen but my notebook does'nt find my ppc... It's strange because yesterday everything was fine and the connection to my notebook was ok but in the 3-color screen i can't build a usb connection.
ok, problem solved. i've puted a new core on the ppc and now appears the old wm5.
how did you manage to get back to the old rom ? i am stuck on the qtek screnn and the only thing i can access is the USB flash 3 colors screen but my pc doesn't seem to the device...
any help greatly appreciate )
thx in advance
ben
do you have the problem with the SPL 3.08?
no I am in SPL 2.20... and IPL 2.09...
thanks for your help
please write the full ipl/spl number!
here it is :
IPL : 2.09
SPL : 2.20.0000
thx
finaly I manage to dowgrade it by changing my driver - the problem was coming from vista
important is to know, that the 3-color screen give the possibility to communicate with your computer (connected with usb).
so, you have the possibility to copy a new core on it. after that you put a new wm or you take the old one. in my case, the old wm5 was still on the ppc.
yesterday i was testing the wm6 in german but it was not really nice... so i work again with wm5 and wait till a complete wm6 solution is available.

MDA Vario II (Hermes) upgrade problem,

Hi @ all
I need help!!! I have a Vario II and wanted to unlock it to use another sim, i downloaded a package called HTC_Hermes_SIM_CID_Unlock_v3a and started it. Ok now i have the big problem that when i start the MDA, only the Tri color screen appears. What can i do, do make it work again??? Maybe an upgrade, i have no idea.. Please help me, i wanna use my Vario II again, now it seems, that i can throw it in the rubbish bin. I'm absolutely hopelessly....
Ps. I also tried to update it to WM6 with the t-mobile software and with a normal one, downloaded from a link in this forum but after 1 % there is a update error 286 : The ROM Update Utility has encountered communication errors during the update process... This programm will guide you.. and so on ..
On the screen are the 3 colors and white and the Information: HERM 300 IPL-1.01 and HERM 300 SPL-1.40.0ipro
Ok thats all i know ^^
Firstly, have you tried the unbricking wiki page and followed the instructions. Be patient, read, reread and understand.
Secondly, what OS are you using (Vista, XP, W2K etc?) do you have the .net framework installed on that PC?
You (fortunately) appear to have HardSPL on the device by the sound of it so should be able to unbrick it if you follow the instructions on the wiki page.
Make sure you're using a non-vista PC with the .net framework installed and then try flashing ANY OS ONLY Rom in NBH format using the custom RUU wrapper. This should restore your device to some form of order.

help help help!!!!!!! MDA

ok my i have a mda vario and i have no clue how to connec it with my pc..i tried using window mobile center but it always said im not connected but when i go to the settings it says my phone is connected can anyone help me? cuz i really wana add stuff to my mda
Win Vista is still with problems,use WinXP and latest Activesync 4.5,there won't be any problems.
how do i change back to winxp
Simply,either make new partition of the Hard Disk and install winxp or altogether install a fresh installation of winxp on your pc.But if you have another pc or notebook with winXP running,use that one.

Categories

Resources