Database Users

jam and tomtom3 BT GPS

any body use the tomtom BT gps on the jam? any problem?
cheers

I use it with my bluetooth GPS (v 3.07)... No problem
@+
Largo

how do you get tom tom working ?
it keeps telling me to instal maps, wich i already did

Did you use official map installs or warez?

the map that comes with the tom tom software, you first install the navigator app and then you can install maps, then i install the netherlands and want to start tom tom on my mda and it says that i should install maps from the cd first

I had this, I think it happened because I installed everything at once without clicking the "ok" buttons on the PDA after each app installed (i.e it installs about 5 things, tom tom nav, tom tom gps, tom tom wizard, tom tom maps etc). If you dont click ok after each one it can get confused and not install the map.
Uninstall the map using activesync add/remove, then re-install it from the cd, making sure to click ok on the pda if it asks you.
If that doesnt work uninstall the whole lot using activesync, soft reset, then install from scratch but make sure to keep an eye for ok buttons on the pda while installing.
Also make sure you have enough memory, the maps are big (16mb, 32mb, 64mb and 128mb...dont know how big the netherlands one is).
Jez.

well its working now i think it was because the memory card i installed it on was not empty, i used an empty card now and everything is working

I cannot get it to install completely, as soon as i click on install it finds my JAM and an error message appears saying something about "File hierarchy" and tomtom support say that JAM is not a compatible phone for the navigator system. Can anyone help

anybody try the tomtom BT GPS?

works good for me with tomtom3 and blue tooth tomtom GPS.
first i had problem to install but it was because i use a USB hub.tomtom need a direct connection to install (there is a faq on TomTom site).
after to connect the bluetooth GPS ,you open Tom tom navigator , you ve got to go on the icone GPs state, then in Gps Folder choose "TomTom Wireless GPS" in the first window and "Bluetooth GPS" in the second.
good luck...

my jam always seems to freeze on tomtom 3.07 after a while im on v1.11 and bluetooth patch using an globalstat BT GPS :\ fecking thing

Brrrr Freezing again!
gazzaman2k said:
my jam always seems to freeze on tomtom 3.07 after a while im on v1.11 and bluetooth patch using an globalstat BT GPS :\ fecking thing
Click to expand...
Click to collapse
Your freezing problem is prob because of your choice of memory cards, certain cards work well some not @ all, lotsa threads about this.

yeah i just found that out i have a peak ultra 60x high speed 1gb sd and a 256mb simpletech one the simpletech one works great but yet the 1gb one freezes

I am using the TomTom BT GPS w/ my Jam too.
But I am not using the Tomtom software (since I found Routis V2 is much better for voice prompt and routing in US). I don't even need to install the GPS driver. Just pair it once and it will connect eveytime I open up my GPS software.

Four things about Tom Tom on JAM:
1. It seems to be equally as buggy as the rest of the JAM so no knowing when wierd stuff happens whether or not it is TomTom or the JAM or something else. That said when you do get it going, it does work nicely most of the time. Some intermittent weird behaviour:
- sometimes won't change maps
- keeps turning JAM back on when I turn it off. Have to close TT3 to get it to stop.
- without a power source, screen keeps going dark
- occassional BT issues
2. When TomTom doesn't see the maps at all but you know you've installed them, make sure you haven't deleted a file in the root of your SD card called "ignore_my_docs" which is a zero byte file that is hidden. This caused me a bit of pain for a while.
3. Because of my previous issue, I discovered when I emailed TomTom support that TomTom doesn't in fact support this release on the Magician and won't help you if you tell them that is what you have. So if you do need support make sure you give them the name of a device that they do support.
4. TT3 user interface leaves a lot to be desire IMHO, and the one thing that drives me nuts is that I have this SD card full of wonderful maps that I have paid for yet I can't simply type in an address just to look at the map, I have to pretend to make a journey, connect the GPS, blah, blah, blah. The only way around this I found is that if you keep address information in your contacts, you can select the "Show TomTom map" option.

I've TT3 3.07 on my magician with an adapt bt gps and it works fine. You do have to shut down the application as stated above, the device will keep switching on if you don't. But one problem is irritating: I live in Belgium where there is a general speed limit of 120 Km/h. I set the prefs so that the safe speed warns me showing no map but only arrows. If I drive too fast for a while the QTek S100 switches off and sometimes back on if I slow down under 120 Km/h. I didn't have this prob on my other, wired, device.

Will TomTom Navigator 5.x work with the Universal?

Hi, I'm hoping to get the new Windows Mobile 5 device dubbed the HTC Universal, AKA o2 xda Exec.
TomTom tell me TomTom Navigator 5 is NOT compatible with it.
www.mobilefun.co.uk state that it is compatible.
Some people on forums say they have 5.1 working with the device.
Other people state the Bluetooth won't lock in.
Does anyone here know the truth?

Yes it will work
It works. I use TT 5.1 about every day (via a bluetooth receiver). Here's the instructions to install the program.
http://www.pocketgps.co.uk/modules.php?name=Forums&file=viewtopic&t=28171&highlight=
Go about half way down.
To install your BT GPS receiver. First pair the device. Then add a new COM Port under the Bluetooth settings. You want to add an OUTGOING port. I usually specify it as COM0. Then start up TT5, go into GPS configuration, selct "Other BT Receiver", then select COM0 from the menu. TOMTOM will automatically start up BT (it doesn't have to on before you launch the program), find the already paired receiver and start communicating with (give it some time though. the whole process takes about 30 seconds to a minute).
Hope this helps.

Cool, thanks!
And finally... I assume the Universal can support 2 simultaneous bluetooth connections? E.g. can I use TomTom with the bluetooth GPS at the same time as speaking on a bluetooth car kit?

To keep things simple
Tomtom 5.0 does NOT work with the Universal. Tomtom 5.1 Does. Hpoe this helps

Received my T-Mobile UK MDA PRO today. I can confirm that TomTom 5.1 DOES work great on it with any bluetooth GPS device, although it was a few hours before I stumbled upon a thread in this forum which had instructions on how to get it working

jasjar works fine with tt5.1 and can connect at same time with gps,headset and many bluetooth devices

Re: To keep things simple
mikeycollins13 said:
Tomtom 5.0 does NOT work with the Universal. Tomtom 5.1 Does. Hpoe this helps
Click to expand...
Click to collapse
Yes it does. I have 5.0 running on my JASJAR now. Haven't upgraded to 5.1 yet in case it breaks something.

just replace the tomtom navigator.exe with the 5.1 version, all done.

How on earth did you manage to get TT5.0 to work?
I have tried everything (all the above tricka and then some) and cannot get the right com port to show up from within Tomtom? Can you tell me step by step?

How on earth did you manage to get TT5.0 to work?
I have tried everything (all the above tricka and then some) and cannot get the right com port to show up from within Tomtom? Can you tell me step by step?

Re: How on earth did you manage to get TT5.0 to work?
mikeycollins13 said:
I have tried everything (all the above tricka and then some) and cannot get the right com port to show up from within Tomtom? Can you tell me step by step?
Click to expand...
Click to collapse
It does work, if you follow the guide in this thread exactly:
http://forum.xda-developers.com/viewtopic.php?t=28386
However, I had to use COM4 instead of COM0.
I also had a problem where I connected everything to the right COM port, could see TomTom accessing the GPS device by the LEDs, but still "no GPS device found!" - it seems TomTom likes your GPS device better if it's actually locked onto a signal (so go outside!), give all this a try

...talking of TTN5....
Has anyone had any success getting TT working with the Wired GPS mouse? Is there a way to connect it to the Exec...?(mini USB to serial connector?)
If the 2 can be physically connected, does the software see it/connect up properly?
TIA
cheers
Paul

FYI, I emailed TOMTOM about the installer crashing, and guess what they said. "TOMTOM 5 is not supported on the IMATE JasJar."
What a load of cobblers. It works perfectly well if you install it using the cab files. TOMTOM support is the biggest load of s**t I have ever come across.

JJ works fine with the following:
1) Navigon MN 5
2) TT 5.1
3) OnCourse Navigator
4) iGuidance
These have been tried and tested.

Just cause it's not supported it doesn't mean they don't think it'll work. it just means that they won't help you fix it if it goes wrong becuase they have not tested on that platform. always worth a try regardless of what the vendor or devlopers say!

Another MDA Pro with TT5
I just got an MDA Pro a couple of weeks ago, and being the fool I am, bought a copy of Tom Tom 5 from Fleabay (doh!).
On receipt, I could not get the software to load from my PC, and when trying to copy over the cab files manually, the ttn.cab file will not load on the PDA. On closer inspection, this has got something to do with 'Bekonl' so appers I have wasted some money on cracked software that does not work.
Is this right? Or if I can obtain an alternative ttn.cab file, will it load, if so will it be locked? I was just looking for a reasonable low priced SatNav solution - but this is proving to be harder than I thought!

For those of you coming from a WM2003 device you can simply install TomTom on a memory card on that. Take the memory card out and put in Universal. It works. That's it.

I am not unfortunately. I am coming from a Mk1 paper diary, a £3.99 map from the petrol station, and a bullet proof Nokia 6310i!
All help gratefully received though.

Tuscan said:
I am not unfortunately. I am coming from a Mk1 paper diary, a £3.99 map from the petrol station, and a bullet proof Nokia 6310i!
All help gratefully received though.
Click to expand...
Click to collapse
If the ttn cab fails to install try this;
uninstall all tomtom entries from remove programs.
Remove sd card from device
install gps.cab
soft reset (this is the important bit)
install ttn.cab

JJ
JJ works fine with Oziexplorer, Tomtom5x
:wink:

Tom tom maps

I have tom tom navigator 6 with uk ireland and europe maps which worked brilliant on my tytn II. but it doesn't work on my touch HD as the screen resolution is all wrong so i followed a link on this forum that allowed me to download tom tom 7 which does work fine on the HD but it doesn't come with any maps. tom tom home on my pc recognizes that tom tom 7 is on the device and that i've got maps installed on the phone but when i start tom tom 7 on my HD it doesn't recognize the maps are there. How can i get it to recognize the maps?

so you are trying to get TT6 maps to load on TT7 software?

yeah if thats possible.

I confirm is possible. I was in the same situation as yours (tytn II with TT6). I installed TT7 on my new blackstone, connected to TT home, update device (TT home needs to be aware that you upgraded) amnd then installed the TT6 maps.
Everything is working fine now.

hi, which versikon of TT Home?
thnx

Cannot check right now but it's not the latest, it 6 month old...ar u saying that maybe it's not working with the latest? I won't upgrade then.

well for me, i am new to all of this
I will get my HD next week (hopefuly) and then i'll start experimenting with what i have gathered of info and software.
I hope i can get everything up and running before my trip to the states.

Just checked my version, is 1.5

Tomtom7 on HTC Touch HD/Blackstone and problems with tomtom home.

Hi everyone.
After some fiddling and playing, I have managed to install Tomtom7 v7910.9185, with the western europe 1GB 815.2024 map.
Then managed to get the UK postcodes added too as they were recognizing.
Now I seem to be having trouble connecting it to Tomtom Home. I have downloaded version 2.5 , but I already have a device connected , and when I try to switch to the new HTC Touch HD/Blackstone , i get errors saying wrong device..
Do I now have to tweak and play with tom tom home to get it to recognize my device.. Any help please, would be most appreciated.
Neil

you dont need to use tomtom home other than for mapshare, everything else can be installed direct
as im sure you know seeing you have maps that are not possible to buy without a working registered version of tomtom home
if you want mapshare, you need to search for the iberia workaround, the instructions exist on this site and via google, but sorry, i cant be bothered to do the search for you

Tom Tom Navigator

Ok, really newbie here and portuguese. Search already for my doubts, but no concrete answer. Have a htc nike aka touch dual and would like to install gps on it. At least the program itself, cause read already that probably have to buy an external bluetooth device to capture the sattelites signal. Questions: 1- Is it possible? 2- Have preference on tom tom. Which version (cracked one)? 3- Tried to install tom tom navigator 7.916.9189 (qvga black), but when i connect to tom tom home it doesn't detect the phone or the software(tom tom). Anybody knows why? Oh, by the way, i also did the same operation with a polaris 200 aka Xda Orbit 2 and everything is running wonderful. Thanx.

Try another version of TomTom

Install gpsgate. Simple as that. The software cost money but the trial version should have all the feature you need.

I can install and run garmin app in my device. It have to attach to external gps to connect to satellite, without it, we still can routing our trip, but we must follow the route manually. With this app, I can find my way home everytime i go out there..
Sorry for my bad english, just want to share my exp..