Hello,
my post vanished due to the backup being restored, so I re-post:
I tried to alter my cube settings with the "Touch Settings" program on my ELFin. But somehow the registry got screwed: buttons no longer work or show no graphic at all.
Can someone please give me a hint on how to restore the registry items to their original state, or tell me how I re-install TF3D without having to hard-reset.
Thank you
R/\LF
Forget it. I have done a hard reset. My Elf is much faster again, too ...
RalfEichler said:
Hello,
my post vanished due to the backup being restored, so I re-post:
I tried to alter my cube settings with the "Touch Settings" program on my ELFin. But somehow the registry got screwed: buttons no longer work or show no graphic at all.
Can someone please give me a hint on how to restore the registry items to their original state, or tell me how I re-install TF3D without having to hard-reset.
Thank you
R/\LF
Click to expand...
Click to collapse
i had the same problem and i did a hard reset to and that worked
Related
Hi,
I have a T-Mobile MDA Compact III (aka HTC Hero) and I was trying to change some things in registry, also I owerwrited some dll witch had attribute ROM (using sktools). Now I have ppc with not working camera unfortunately. Will hard-reset fix my problem ? Will it give me correct registry and also all device dll to default settings ?
Yes, a hard reset will restore your device to the way it was when you first got it. It's like formatting your PC hard disk and re-installing Windows.
Hard-reset didn't fix
Hi,
I have the same problem. When I start up the camera I get the message, the camer couldn't initialize. I have SKtools installed. Hopefully someone has an idea.
as said above.press reset hole &2soft keys ("-")together then "yes-green bttn".or somewhere in settings is'Clear Storage'. btw, backup ur contacts... before
premnik said:
Hi,
I have a T-Mobile MDA Compact III (aka HTC Hero) and I was trying to change some things in registry, also I owerwrited some dll witch had attribute ROM (using sktools). Now I have ppc with not working camera unfortunately. Will hard-reset fix my problem ? Will it give me correct registry and also all device dll to default settings ?
Click to expand...
Click to collapse
The golden rule to avoid having to hard reset is to always backup your phone before starting to mess around with the registry, that way you can undo any mistakes you've made.
I think that SKTools backs up the registry before deleting or changing some value so you may want to check up on that before hard resetting.
damn, my mogul got f*cked up after installing touchflo. Not trying to blame this program but maybe there could be some conflict? After i installed it and didnt really like it, i tried goin to remove program in setting to remove this, but guess what, nothing showed up in there. For some odd reason i cant remove any program from my phone because the screen was blank. Then i tried to install another program and said unsuccessful whenever i tried to install anything. Does this happened to anyone else? any solution
I have the same problem on mine. I will let you know if I can figure out a solution.
LD
http://www.andLinux.org
I had a different problem awhile back after installing Total Commander, any new programs that were added didn't show up in the remove programs menu.
What I had to do is use Activesync to remove them, not sure if it will work in your cases though, but hook up with A.S. and on your PC in A.S. open tools/add remove programs and check/highlight what you want removed.
Good Luck
I am having same problem, please someone help.
REMOVE PROGRAM list is empty after ftouchflo installation and touch cube installation.
ACTIVE SYNC not working either.
please help
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Me too.
I just hard reset. After reading everywhere, this was the only option.
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
saenzjoseph said:
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Click to expand...
Click to collapse
i think that was mine,lost everything in my storage memory and couldn't sync up to my desktop after installing the touch flo cube cab.ended up hard resetting and starting over,no cube till someone figures out what caused that.
JAMRZ69 said:
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
Click to expand...
Click to collapse
Poorlyduck has a good cube that doesn't cause this issue, its over at PPCGeeks
No need to hard reset
Anyone running into this "Empty Remove Programs" problem in the future, there's no need to hard reset! Check out the simple solution here:
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
found it in this xda thread:
Conclusion: Microsoft Windows Mobile messed up the security settings, so let Microsoft Word Mobile put it back up... problem solved!
I am trying to change some registry settings to do things such as 'adjust volume settings' 'adjust backlight settings' 'turn bluetooth on and off' etc etc.
I want to use mort script to make the changes but so far I haven't figured out how to make the changes take effect without a soft reset, even when making the changes with a registry editor.
Does anyone know how to do this so that the changes take effect immediately?
Any help appreciated.
two things:
1st: all of the things you mentioned above should work without a reset. the best thing to do is change the reg value manully and if it works with out a reset then you know the problem is in the mort script
2nd: If you know how to edit xml files then download this cab and edit the xml file how you want. this should help some
http://www.megaupload.com/?d=RG6JZC33
this has a lot of apps in it you will be looking for the one that says tweaks
Thanks for the info irus,
Like I said, using a registry editor to change the settings does not take effect until I soft reset.
For example (and i'd appreciate it if someone could test this on their phone) changing the values in HKCU\ControlPanel\Volume...."Volume" and "Ringer" to 0 assuming it is not already set to silent does not actually turn the phone to silent until I soft reset.
Could someone please check this for me and report back.
BTW I'm using a Trinity (HTC P3600) with AX3L's LITE ROM.
Thanks in advance.
I tried it and it did not work, you sould try to edit the xml file in the program i told you about and try it there. when i get done with homework i will try it my self
Registry value is read by windows while loading. In case of desktop pc if you restart the explorer process the registry gets loaded. you need to find some way to load the registry again.
fuzzvirus said:
Registry value is read by windows while loading. In case of desktop pc if you restart the explorer process the registry gets loaded. you need to find some way to load the registry again.
Click to expand...
Click to collapse
Thanks fuzzvirus but that was my original question.
Does anyone know of a way to do this?
Bump......
I'm also interested in this theme. Does anyone know an answer?
I have a very strange symptom on my device. When I go to the start menu and try to scroll in the window it didn't refresh the screen, the icons are overlapping each other. This happening if I am go to a subcategory in the start menu as well. See attached screen shots. Right now it seems every other apps are working fine.
Issue caused by WMedia Support by Helmi's. I uninstalled but it did not helped at all
Any idea, how can I resolve this issue?
What I have done till now:
I have checked the install cab file - it seems all dlls were removed from the device (2 or 3 remained but the date of the files are the same when I coocked the ROM)
I have checked all files were created/modified on the day when install the codec, but I did not found anything.
I have tried install some start menu converter such like start menu grid, but they did not helped at all to solving this issue
ROM: Dutty WM6.5 LEO R4 WWE
Any help/idea would be appreciate.
I think you will need to Hard Reset your device as you mentioned that some critical system files may be missing. I don't think anything else can be done.
Change the tsk theme to classic blue then soft reset, then change it back.
dwizzy130
Ahh... never thought of that, good call
Hope that fix works.
dwizzy130 said:
Change the tsk theme to classic blue then soft reset, then change it back.
dwizzy130
Click to expand...
Click to collapse
Thanks for the hint, but unfortunately it did not help, any other idea apart from hard reset?
If no one else has reported the same bug in the chef's thread then flash a stock rom, then flash the Dutty rom again. Then hard reset twice. Then find an update to that program you installed that caused it in the first place.
I don't think it is related to the rom is much more the app I installed. If there won't be any other idea i will do a hard reset and check (might be update rom as well)
I also try to check registry changes what I found in the cab, but nothing special, at least for me
hi all
recently i installed the S2U2 app ,i used it for a while and earlier today i uninstalled it
the problem is that now pressing the red (hung up) button doesnt lock the device
i suppose something must be don in the registry but i dont know what.....
HELP ME PLEASE
Hi there
Have you tried a soft reset?
If yes it might be a good idea to do a hard reset but make sure you back up all your info.
There is a .cab on s2u2 offical website to restore wm6.5 lock screen and if you can't find it try to google RestoreWM65DeviceLock.cab file and install it.
That will solve your problem. No need to change registry settings.