Database Users

Help with trusted certificates on WM5?

Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!

Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.

Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!

I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one

really! which software could i use to reboot the phone??

also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?

yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.

What software did you use or could i use to reboot my ppc chuckchuck?

Blank screen of writing a new text message on 818pro

Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?

scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?

Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?

scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.

is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.

Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.

niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.

scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3

Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.

niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.

scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.

scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike

mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.

scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD

it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone

remove program problem from mogul

damn, my mogul got f*cked up after installing touchflo. Not trying to blame this program but maybe there could be some conflict? After i installed it and didnt really like it, i tried goin to remove program in setting to remove this, but guess what, nothing showed up in there. For some odd reason i cant remove any program from my phone because the screen was blank. Then i tried to install another program and said unsuccessful whenever i tried to install anything. Does this happened to anyone else? any solution

I have the same problem on mine. I will let you know if I can figure out a solution.
LD
http://www.andLinux.org

I had a different problem awhile back after installing Total Commander, any new programs that were added didn't show up in the remove programs menu.
What I had to do is use Activesync to remove them, not sure if it will work in your cases though, but hook up with A.S. and on your PC in A.S. open tools/add remove programs and check/highlight what you want removed.
Good Luck

I am having same problem, please someone help.
REMOVE PROGRAM list is empty after ftouchflo installation and touch cube installation.
ACTIVE SYNC not working either.
please help

There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....

Me too.
I just hard reset. After reading everywhere, this was the only option.

i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.

saenzjoseph said:
There was another thread on this(No Items in Remove Programs), but it didnt go anywhere.
This just also happened to me. I also found that I could not install programs and that me phone would not sync... This happened right after installing Slither Cube, and efrost FTouchFlo.. so I went to uninstall and ran into the same thing...Deleted items from the startup folder and still the same thing.. deleted files from the program files section and same, also tried a soft reset 10X....so I had to do a hard reset....
Click to expand...
Click to collapse
i think that was mine,lost everything in my storage memory and couldn't sync up to my desktop after installing the touch flo cube cab.ended up hard resetting and starting over,no cube till someone figures out what caused that.

JAMRZ69 said:
i hope someone knows how to fix this cause i really loved how the latest touch flo cube cab worked on my phone.
Click to expand...
Click to collapse
Poorlyduck has a good cube that doesn't cause this issue, its over at PPCGeeks

No need to hard reset
Anyone running into this "Empty Remove Programs" problem in the future, there's no need to hard reset! Check out the simple solution here:
http://www.24hsoftware.com/How-To/this-device-is-restricted-from-downloading-this-file-type.html
found it in this xda thread:
Conclusion: Microsoft Windows Mobile messed up the security settings, so let Microsoft Word Mobile put it back up... problem solved!

TF3D: habe screwed my registry

Hello,
my post vanished due to the backup being restored, so I re-post:
I tried to alter my cube settings with the "Touch Settings" program on my ELFin. But somehow the registry got screwed: buttons no longer work or show no graphic at all.
Can someone please give me a hint on how to restore the registry items to their original state, or tell me how I re-install TF3D without having to hard-reset.
Thank you
R/\LF

Forget it. I have done a hard reset. My Elf is much faster again, too ...

RalfEichler said:
Hello,
my post vanished due to the backup being restored, so I re-post:
I tried to alter my cube settings with the "Touch Settings" program on my ELFin. But somehow the registry got screwed: buttons no longer work or show no graphic at all.
Can someone please give me a hint on how to restore the registry items to their original state, or tell me how I re-install TF3D without having to hard-reset.
Thank you
R/\LF
Click to expand...
Click to collapse
i had the same problem and i did a hard reset to and that worked

[URGENT] Help needed, INVALID SECURITY CODE

Hello,
My phone has 4 number security code you have to enter when the phone's being unlocked(did in settings, default winmo lock but HTC made an unlocking skin on it).
I've taken out a battery while the phone was on, then turned it back again in 3 hours. I move the unlock image, and as usual dialpad appears asking for security code. I enter as I usually do and it says INVALID CODE. I'm like - WTF? Tried again, nothing. Tried dozens of times, nothing. Reboot doesn't help. Now it even stopped saying INVALID CODE, when you press the unlock button it doesn't do anything.
I had the "lock" feature working fine for weeks.
QUESTION: What to do(without hardreset)? Phone is set to sync when USB connected, Windows Mobile Device Centre says unlock your phone first before sync. I can't do anything, can't make call(i can receive it), can't check messages or anything, i can't unlock it ffs! Help please, any ideas are welcome

you aren't alone,happened to quite a few.
did you recently install swype 3.9?(there are other reasons)
i've not seen anyone get out without hard resetting.

i have miri rom with swype pre installed
maybe there's a way to upload a file to storage card that will change some registry keys? problem will be how to run it

Sallcho said:
i have miri rom with swype pre installed
maybe there's a way to upload a file to storage card that will change some registry keys? problem will be how to run it
Click to expand...
Click to collapse
About the only thing I can think of is if you were able to find a way to put something in the \windows\startup folder that fixed it - but like someone here already said - odds are you're going to have to do a hard-reset.

@
It happened to me awhile back...i tried to find a way but didnt manage to find it, i had to hard reset..