Database Users

Why my ringtones keep changing to "windows default&quot

I just wondering if you guys has the similar problems with me or not ....
I've done registry hack for changing the default storage of rings to \storage card\rings, occasionally the ringtones will automatically change back to "windows default". I've check that my O2 mini able to play the selected tones. After a while, when i suspend it or soft reset, it will change back to "windows default".
Does anyone has this problems ? Is this because of my SD card speed ? I got a 256mb Kingston SD which is included from the package.
Your help and comment are appreciated.
Thanks :wink:

Ringtone back to default
If you installed pocket player.. try to uninstall it...

Hi,
You dont need to uninstall pocket player. Just go to pocket player options and remove the file association. This should solve your problem.
Regards,
Vishal

hi... i dont have or ever installed pocket player but hansip's problem is happend to me aswell... anymore idea how to use our own ringtones without have to copy them to the windows folder?? thank you

I had the same problem...
and the solution was not to change the path to \storage card\rings...
instead.. you have to make it \storage\....\Rings and this will certainly work :wink: .....
I believe there is some sort of conflict when you choose Storage Card
I know you won't be able to use all of your music... but at least you'll free up some memory from the RAM..
and if you have the BigStorage trick.. you'll be just Fine..
I have three ring tones in my Rings folder.. and I think that's enough for me.... 8)
cheers

After coming out of suspend mode or after a soft reset, the Magician needs some time to initialize the SD card. Since the programs, including the phone settings, are run before the SD is initialized, the Magician cannot find the ringtone on the SD card and therefore resets it to windows default. It does not matter wether or not you have a fast SD card, it is a flaw in the operating system. That is also the reason why today plug-ins are better run from main mem or internal storage than from SD card. Try putting the ringtone in your internal storage, you'll see the difference.

erwinsie said:
anymore idea how to use our own ringtones without have to copy them to the windows folder?? thank you
Click to expand...
Click to collapse
just hold the stylus on the music file you wish to make as a ringtone, until you get the pop-up menu, then choose Set as Ringtone
cheers

Not really. First of all you need a special .cab file for that, which you can find attached at the end of my post.
Second, that just copies the ringtone in Windows/rings, thereby taking up valuable RAM, which he wants to evade.

Koksie said:
Not really. First of all you need a special .cab file for that, which you can find attached at the end of my post.
Second, that just copies the ringtone in Windows/rings, thereby taking up valuable RAM, which he wants to evade.
Click to expand...
Click to collapse
Thanks for the input guys .... I solved this problem by changing it into \storage\rings instead of put in on \storage card ..... Well I guess, the reasonable explanation for this is because when the phone rings, the device is trying to access the rings into the location that we specified in the registry and i guess the process get too fast .... So the device having a difficulty reading the \storage card ... and that's why it straight goes to "windows default" cause of course that's ring store in internal memory :wink:
By the way I'm just curious what's cab file does Koksie provide us ? Could you please explain more on this cab files ? What it actually does for our Mini ?
Thanks again guys for the input..... :wink:

I am having this problem after swtching directories too but it is not fixed after changing the registry to /storage/rings, /storage/.../rings or even windows/rings. They all go back to the default ring!!!
Please help !!
Thanks!

hansip said:
Koksie said:
Not really. First of all you need a special .cab file for that, which you can find attached at the end of my post.
Second, that just copies the ringtone in Windows/rings, thereby taking up valuable RAM, which he wants to evade.
Click to expand...
Click to collapse
Thanks for the input guys .... I solved this problem by changing it into \storage\rings instead of put in on \storage card ..... Well I guess, the reasonable explanation for this is because when the phone rings, the device is trying to access the rings into the location that we specified in the registry and i guess the process get too fast .... So the device having a difficulty reading the \storage card ... and that's why it straight goes to "windows default" cause of course that's ring store in internal memory :wink:
By the way I'm just curious what's cab file does Koksie provide us ? Could you please explain more on this cab files ? What it actually does for our Mini ?
Thanks again guys for the input..... :wink:
Click to expand...
Click to collapse
The cab file will enable you to set mp3 as ringtone when you hold to the file.

DanielHochman said:
I am having this problem after swtching directories too but it is not fixed after changing the registry to /storage/rings, /storage/.../rings or even windows/rings. They all go back to the default ring!!!
Please help !!
Thanks!
Click to expand...
Click to collapse
What software do you have eg.. phonealarm, spb, etc, it may cause the error

The .cab I posted enables an extra option in the pop-up menu when you tap-and-hold on a mp3 files. Use the build-in file explorer, go to the folder where your ringtones are stored, tap-and-hold on a ringtone and in the pop-up menu you will see an option "set as ringtone". tap on it and the ringtone will be copied to windows/rings and set as your default ringtone in the phone options. Only drawback: the ringtone will be copied into main mem, taking up a lot of space if you have a full sized mp3. If you shorten it to 10 seconds and decrease th quality, it should take up less space. I have no idea if hacking the registry to make storage/rings the default ringtone location will work with this .cab. Maybe the .cab only looks at the registry for the default location and copy it there, maybe it just always copy the file to windows/rings.

I have all the sbp software- pocket plus, weather, gprs moniter etc.. also all the PHM software- but this wasn't happening when I instaalled that stuff- it happened after I changed the ring directory-
I have tried chaging it to everything- and it still goes to the default ring!!
thanks,
Daniel

Not only that-
The defaultt ringtone seems to play thru the speaker regardless of whether or not the headphones are plugged in- please tell me I don't need to hard reset!!

Having the same problem here. I have changed the ringtone directory to be
"\My Documents\My Music\Poly" (the same registry hack).
Now, whenever I change the default ringtone to something else, it is done. But when an incoming call is received, the old windows default ringtone is assigned as the ringtone.
HEEELP...

I did a hard reset and it fixed the problem of switching back to the default- I recomend tht anyone who tries this registry hack make a register backup to revert to- soething went wrong-
anyway- I am still having the problem of the rington laying out load when I have the headphones plugged in- is this a standard flaw??
I don't remember having this issue when I first got my Magician...is there a setting to change???
Thanks,
Daniel

I'm also experiencing problems with this but was bale to move the things to the Storage. However, during my experimentation in Photo Contacts, when I do a preview, the default ring tone does not play.

not possible!
hi... according to some ppl that replied to my question (exatcly same with this tread), the answer is WE CAN NOT put ringtones files in SDcard and use them from there.. even we edit the registry.. it works when we preview them, yes.,
BUT
during standby mode, and some1 call us, the window cant find the ringtone fast enough (coz they are in SDcard, access is slow!) so they use the default one..
try to edit the registry to /storage (instead of storage card) then it works. but ofcoz, u must copy all ur ringtone to /storage, now u r using xda memori, not sdcard
dont try to buy faster sdcard, i dont think that will work.. the fastest sdcard is still far to slow for xda... but i any1 success, let me know like you, i have hundreds of ringtones and i dont want to put them in storage...

I found another solution for the problem
I haven't tested the suggested solution while i am writing thsi post (too excited)
check out here
http://www.howardforums.com/showthread.php?threadid=801978
Selecting Ring Tones from your Storage Card instead of \Windows\Rings\
--------------------------------------------------------------------------------
Moving Ring tones to your Storage Card.
Ring tones are choosen from \windows\Rings\.
However, you have to copy your ring tone files there and that takes up
valuable RAM Memory.
Wouldnt it be better to choose your ring tones from your Storage Card, better
still you can place hundreds of ring tones on your storage card without taking
any RAM at all.
Here is how you can do it.
You will need a good file explorer software like "Total Commander"
from http://www.ghisler.com/
1. Run Total commander
2. go to \\ (at the very top)
3. open \\\registry\HKCU\ControlPanel\SoundCategories\Ring \Directory
4. Change the content of this file from
\Windows\Rings to \Storage Card\Rings\
Note: \Storage Card\Rings\ is the directory I created on my storage Card to store my personal Ring Tones.
To select a new ringtone, Start->Settings->Phone.
The Ring tone are now selected from \Storage Card\Rings\
and Best of all, your ring tones doesnt take up any valuable RAM Space.
I hope this helps
Merry Xmas all,
InMind
---------------------------------------------------------
give me feedback if it works, (backup before testing)
CHEERS
mrtnsky (MARTIN)

sddaemon.lnk ......... What is this for?

I saw this on the startup folder. What does sddaemon.lnk do?

its speed voice dial. it links to sddialer.exe in windows folder

Hi
On my machine this links to \windows\sddaemon.exe
sddaemon.exe is the thing that site there in ram waiting for you to insert an SD card with pics - I dont know whether it looks for .jpgs or just a dcim folder in the root.
I have removed this from startup cause I am not interested in said functionality!
Nigel

Thanks for responding.
Veletron: So basically we can delete this off and there's no worry of any conflict?
Anyone else have some answers, so which is which?

I've moved the link to My Documents on the SD. Reset doesn't appear to be any faster. Nothing broken as far as I can see. Mind you, I don't use the Voice Shortcut anyway.

Ward said:
I've moved the link to My Documents on the SD. Reset doesn't appear to be any faster. Nothing broken as far as I can see. Mind you, I don't use the Voice Shortcut anyway.
Click to expand...
Click to collapse
Done exactly the same thing...main thing it seemed to be doing was screwing up my notification queue - though took a few weeks of faultless alarm clocks before it decided to go mental. Took the shortcut out to My Docs and haven't had any problems since. Also, voice dial still works and I always leave my SD card inserted for TomTom / music.
Cheers
Ant

OK, I just deleted it. Did not notice anything new. I'll keep checking out if it did change something.

Message sounds?

My first post in this incredible forum, I have all ready found so much help here and are most thankful, please keep it up.
Is it possible to make your own message sounds and use them when recieving text messages etc.
If possible at all what format should the file be in (mp3 wav)?
Tried with an mp3 placed in the windows folder it seems it cant find it.
Any help would be appreciated.

I'm not an expert so hopefully one will reply, but I think they have to be .wav and I think they have to go in the \windows\rings folder.
cheers

skidoo said:
I'm not an expert so hopefully one will reply, but I think they have to be .wav and I think they have to go in the \windows\rings folder.
cheers
Click to expand...
Click to collapse
Actually, you are 1/2 right, they need to be wavs, but they go directly into windows, not in the rings folder.
Steve

Yep steve is correct the sound file will need to be a .wav and place into the windows folder, ring tones can be mid,wav and so on and they are placed into the rings folder within windows.

Sound file converter???
Morning all,
My first posting also and yes this has to be the mecca for knwledge of all Wizard related things. My question:
Does anyone know of any software downloads which can convert .wma, mp3 or similar files into .wav??? I'm a complete novice at this sort of stuff but the array of ringtones and message alert tones is rubbish on my K-jam. Thanks for any replies.
Del.

Re: Sound file converter???
manindesert said:
Morning all,
My first posting also and yes this has to be the mecca for knwledge of all Wizard related things. My question:
Does anyone know of any software downloads which can convert .wma, mp3 or similar files into .wav??? I'm a complete novice at this sort of stuff but the array of ringtones and message alert tones is rubbish on my K-jam. Thanks for any replies.
Del.
Click to expand...
Click to collapse
You might try Audacity http://audacity.sourceforge.net/download/
It's a free download. I use Sound Editor in Roxio's Media Creator 8 -- one of the MANY useful tools in that program.

Re: Sound file converter???
You might try Audacity http://audacity.sourceforge.net/download/
It's a free download. I use Sound Editor in Roxio's Media Creator 8 -- one of the MANY useful tools in that program.[/quote]
Thanks very much mate, will give it a go and see the results.

Re: Sound file converter???
manindesert said:
You might try Audacity http://audacity.sourceforge.net/download/
Just downloaded the file.....works a treat. This site is the best, thanks guys and keep up the solid work.
Click to expand...
Click to collapse

Re: Sound file converter???
manindesert said:
You might try Audacity http://audacity.sourceforge.net/download/
Just downloaded the file.....works a treat. This site is the best, thanks guys and keep up the solid work.
Click to expand...
Click to collapse
YW -- (but I'm a GAL -- not a guy)!! LOL!! But, that's ok -- none of my friends can believe how "techy" I am, either. But, I'm the first one they come running to with a problem. Go Figger!!

Cheers all,
You keep refering to ring sounds, I am looking for Sounds for alarms and recieved messages, and alerts in general.
But I will try it now with wav files in stead of mp3.
Manindesert,
I'm using Sound Forge 7, but then again I really need it for all my music stuff, so give Audacity a shot.
Update Works fine with alarm and message sounds, thank you all.

Is there any way, hack or otherwise, that will allow you to point your rings/sounds to your SD card? Thought it would be nice to free some space and stop having to move files on and off the card. I change my ring tone with my mood

Javahater,
I've been loking for a hack/program/setting that will do that, but no luck so far.

Unfortunately, all SMS & ring tones must be located in main memory!
But there's a possibility to create a program that will browse a folder of ring tones on SD card & once u select a tone, it will be copied to main memory (and of course erase the old default tone from main memory) & will set this new file as the default ring tone for the phone.

Javahater and Ezzkht,
Maybe you should look here http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard_Tweaks scroll down to this "ANY FOLDER RING TONES"
You will need a Registry Editor like Total Commander 2 or PHM Regedit
Hope this helps

Javahater,
Have been trying above solution for about an hour, seems that this solution doesn't work under WM5, or at least it doesn't make any difference if you change the folder or not (it only points to windows not windows\rings)
Will have to keep looking.

Mikebj said:
Javahater and Ezzkht,
Maybe you should look here http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard_Tweaks scroll down to this "ANY FOLDER RING TONES"
You will need a Registry Editor like Total Commander 2 or PHM Regedit
Hope this helps
Click to expand...
Click to collapse
Thanks a lot Mikebj, it worked like a charm & without soft reset
I just copied all my favourite ring tones to the Storage ROM & it works 100%
Thank youuuuuuuu 8)

Mikebj said:
Javahater,
Have been trying above solution for about an hour, seems that this solution doesn't work under WM5, or at least it doesn't make any difference if you change the folder or not (it only points to windows not windows\rings)
Will have to keep looking.
Click to expand...
Click to collapse
AGREED !! I've got WM2003SE tried the steps mentioned http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard_Tweaks no use.......it still picks up the default folder from \windows\rings, where as I am pointing it towards \Storage Card\Sound\ not working
ok just double checked.....in sounds and notifications options it goes to \windows\rings folder.....but I have o2 plus installed as well...and in o2 plus sounds and notifications options it points me to \Storage Card\Sound any ideas ?

Ezzkht,
Happy t worked for you, can't say the same for me.
Well it is getting more and more weird, when I look in my registry it only points to \windows\ not even \windows\rings\, despite this it still manages to pick up ringtones/sounds in the rings directory, and all sound files placed in the root of the SD Card(go figure).
I'm out of ideas right now, but am still looking for a solution and will be back if I find one.

I just used Resco Explorer with the registry editor add-in.
It worked with me without a soft-reset!
What device do you have, Mike?

Maybe some nice sounds
Hello everyone!
It's a little bit off topic, a little bit not
My advice: SD card is not really a good place for sounds, at least in my case. Why? Sometimes it happened that when I got a phone call, instead of my nice ringtone I've heard the standard one. I think it has sth to do with powering up SD card while changing from standby mode. It's just my impression.
Secondly: I'm looking for some nice SMS ringtones, not the funky ones... I'm getting a lot of messages and it's really boring if you hear "Heeeeellooooo! Your message is coooooomingggg!" every now and then. I will appreciate if you could share your ringtone with me
TroLoo

*Program Request*: Lost sdCard Notification Program

So this is a popular program for the Palm OS: NotifyMe! which basically is a little configurable application that would play a sound and/or vibrate if your SD card ejected.
I know a lot of people who "accidently" shoot their card out when pulling their device from a holster.
If it could have the features of "NotifyMe!" and be WM5 compatible it could be a very popular program.
TIA

malatesta said:
So this is a popular program for the Palm OS: NotifyMe! which basically is a little configurable application that would play a sound and/or vibrate if your SD card ejected.
I know a lot of people who "accidently" shoot their card out when pulling their device from a holster.
If it could have the features of "NotifyMe!" and be WM5 compatible it could be a very popular program.
TIA
Click to expand...
Click to collapse
Hi,
I saw your request 2 days ago, and I said why not! I checked the GUI of the NotifyMe application for Palm and I decided to make one for PPC.
Installation:
1) just unrar the file and copy the exe on your ppc (it may be installed on the sd card and launched from there, it works when sd card is removed, but don't select a music file from the sd card, no sound will be played of course):wink:
2) launch the exe. The first time it will install the config control panel applet and launch it.
3) just configure the notif application and start it.
Useful infos:
This program has been tested on my ppc (see signature), on WM2005 ppc emulators and WM2003SE emulators.
There is no builtin sounds as the one for the Palm, but it can play different music type files like midi, wave, mp3 and wma files.
The app has been UPXed, so it is very small.
The notification stops either by pushing on the stop button or by putting the sd card back into its slot.
Enjoy,
Cheers,
.Fred
ps.: feedback appreciated...
Here is the app and some screenshots:

Thanks .Fred!!! :wink:

vivi said:
Thanks .Fred!!! :wink:
Click to expand...
Click to collapse
Hey Man,
Still living ?!?! :lol:
It's a long time now! :wink:
Greetings,
.Fred

Ha Ha Ha..
Yesssss , I am here.
Now I am using Blue Angel.
So I'm here these days.
But still have a look at Buzzdev.
Nice to meet you here.
:wink:
I've tried it.
It works.
If I choose "Show message and Vibrate and Play sound", it doesn't vibrate and play wav as I choose.
I choose Alarm1.wav which is in ROM.
It only pops up sound and shows message on the today screen, no vibration and no sound.
But if I choose "Show message and Play sound" or "Show message and vibrate",it works fine.
I use BA WM5 AKU3.2 ROM(Helmi 1.3.2)
Thanksss.
vivi

vivi said:
Ha Ha Ha..
Yesssss , I am here.
Now I am using Blue Angel.
So I'm here these days.
But still have a look at Buzzdev.
Nice to meet you here.
:wink:
I've tried it.
It works.
If I choose "Show message and Vibrate and Play sound", it doesn't vibrate and play wav as I choose.
I choose Alarm1.wav which is in ROM.
It only pops up sound and shows message on the today screen, no vibration and no sound.
But if I choose "Show message and Play sound" or "Show message and vibrate",it works fine.
I use BA WM5 AKU3.2 ROM(Helmi 1.3.2)
Thanksss.
vivi
Click to expand...
Click to collapse
You're right Vivi, when I make the test, it works, but when it should be done by the app, it doesn't...
Ok I will investigate this!
Ok, it's done, stupid of me! :x
Version 1.1 is available now...
Thanks for the feedback!
.Fred

Thanks again .Fred.
The new version works completly!!!
vivi

dotfred said:
I saw your request 2 days ago, and I said why not! I checked the GUI of the NotifyMe application for Palm and I decided to make one for PPC.
Click to expand...
Click to collapse
holy cow! I forgot about this request
Thanks so much, I'm going to install now and pass the word around.
thanks!
--Mal

nice program, very nice of you

nice program, very nice of you

dotfred
btw, just for info purposes:
- How would one remove the entry from the Settings tab to configure the program?
- I don't think this is working as it should on the Treo 700wx, but that is probably due to Palm's modifications of the OS. Basically, it only works when the device is powered on. If the device is in standby it doesn't "wakeup the device".

malatesta said:
dotfred
btw, just for info purposes:
- How would one remove the entry from the Settings tab to configure the program?
- I don't think this is working as it should on the Treo 700wx, but that is probably due to Palm's modifications of the OS. Basically, it only works when the device is powered on. If the device is in standby it doesn't "wakeup the device".
Click to expand...
Click to collapse
- it is possible, but tricky.
The control panel applet shown on the Settings/Personal Tab can be found in /windows/NotifyMeCpl.cpl. The trick would be to change the extension .cpl by .dll then open the notifyme.exe in an hex editor and replace notifymecpl.cpl by notifymecpl.dll.
To configure the program, you will need then to launch /windows/ctlpnl.exe notifymecpl.dll
I hope it's clear. :roll:
- I don't know how it works on a Treo, but I just use the standard notification api... On my ppc, whenever I pull the SD card out of its slot, the device wakes up... If you want I can try to add this functionality but I'm not sure if it will work. Maybe the program won't receive the notification that the sd card was retrieved.
Cheers,
.Fred

dotfred,
Actually, I just meant how to remove the control panel applet (my sentence was a bit garbled!) e.g. if I just wanted to remove the program from my device.
In that case, is it just a matter of deleting /windows/NotifyMeCpl.cpl ?
As far as the Treo, don't worry about it for now. Palm did lots of trickery (for the better actually) such as changing registry entries so most "tricks" don't work now.
Once the 750v comes out for you GSM users, I'm sure more about how the OS is orientaited and organized will come out. Then it might be easier for us to nail down the problem (I unforutnately don't know enough to be of much help!) :lol:

very sweet, however i just tried out the program and am having a small issue. after i ejected my SD card the alarm worked as it should, i turned it off and reinserted my SD card and now i have a new "Storage Card2" on my device all my programs are on "Storage Card2" instead of my original "Storage Card" can't rename the file either??? anybody with a suggestion would be greatly appreciated. thanks in advance

1. delete "Storage card"
2. rename "Storage Card2" to "Storage Card" on pdaphone, if it doesnt work, try to activesync with PC and rename it on pc

trying... trying...trying,,,
i cannot delete the folder it has the temp internet files and i get an error trying to delete it. same with rename???? all my programs are on the storage card so now nothing works URGHHHHH!!!!
any other suggestions?
thanks

i have the same problem few days ago, dont remember actually how i fix it.
1. try to fix it on pdaPhone
2. activesync with pc and fix it on pc
or try total commander..
http://www.ghisler.com/ce.htm
if u still cant fix it, do a backup of your pdaphone and copy the backup file to your pc, then do a hardreset and try again

bigedmiami said:
trying... trying...trying,,,
i cannot delete the folder it has the temp internet files and i get an error trying to delete it. same with rename???? all my programs are on the storage card so now nothing works URGHHHHH!!!!
any other suggestions?
thanks
Click to expand...
Click to collapse
read here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=230&more=1&c=1&tb=1&pb=1#more230

malatesta said:
dotfred,
Actually, I just meant how to remove the control panel applet (my sentence was a bit garbled!) e.g. if I just wanted to remove the program from my device.
In that case, is it just a matter of deleting /windows/NotifyMeCpl.cpl ?
As far as the Treo, don't worry about it for now. Palm did lots of trickery (for the better actually) such as changing registry entries so most "tricks" don't work now.
Once the 750v comes out for you GSM users, I'm sure more about how the OS is orientaited and organized will come out. Then it might be easier for us to nail down the problem (I unforutnately don't know enough to be of much help!) :lol:
Click to expand...
Click to collapse
If you just want to remove thr program from the device, just delete the /windows/notifymecpl.cpl and delete the notifyme.exe whereever you put it on the pda.
If you want to clean the registry as well, delete the entries under
-HKCU/Software/FdcSoft/NotifyMe
-HKCU/ControlPanel/SoundCategories/NotifyMeCat
-HKCU/ControlPanel/Sounds/NotifyMeSound
Cheers,
.Fred

bigedmiami said:
trying... trying...trying,,,
i cannot delete the folder it has the temp internet files and i get an error trying to delete it. same with rename???? all my programs are on the storage card so now nothing works URGHHHHH!!!!
any other suggestions?
thanks
Click to expand...
Click to collapse
Try using the memory card reader.

[TIP update] workaround for loadtime of HTC audio player library

A problem with the HTC audioplayer is that it rebuilds the whole library when you tap the music tab after a soft-reset. With a giant collection of music-files this isn't funny anymore You will have to wait for at least 1 minute until you can select a artist, album or song from the library.
A elegant workaround, although not a direct solution for the problem, is to rebuild the library automatically after a softreset and not to trigger it by the selection of the music tab. This can save a lot of time, because (in most cases) the library will be ready by the time you decide to play some music after a soft reset. For me that's enough...
(Still this will not help you very much when you immediatelyafter a soft-reset want to select something from the music library)
Now, to trigger the rebuilding of the library at start-up all one has to do is to place a shortcut to the AudioManager_eng.exe in the startup folder in the windows directory. You can do this yourself or you can use the cab that is attached to this post.
UPDATE:
added a cab that triggers a music library rebuild when the storage card is inserted (or what's the same, when you unplug the device from a "disk drive" connection with the pc)
If the cab doesn't work. Just unzip the attached zip file to the folder "2577" on your storage card. (If the folder isn't there you have to create it yourself)

Nice one - goes some way to avoiding that delay when you first want to use the music player.

Thanks mate. will gie it a try.
I dont really have that many songs bt i still hate the wait!

rumz82 said:
Thanks mate. will gie it a try.
I dont really have that many songs bt i still hate the wait!
Click to expand...
Click to collapse
Nah, the worst is when you accidentally tap the music.
It just freezes. Freaking agrovating!

Updated the first post with a little cab that rebuilds the music lib when a storage card is inserted.
Really great workaround. I love it. I would give this thread 5 stars if I could

I will check it out,
and give it 5 stars if it works indeed

mmmalas said:
I will check it out,
and give it 5 stars if it works indeed
Click to expand...
Click to collapse
lol I don't care. It's a five star workaround for myself.
Hope you enjoy it too.

Thx a lot!
The shortcut method works great

It does indeed work on the stock 1.61 ROM, cheers!

Cracking tip that, thanks a lot.

Thanks! it works..Great ! love u man

mccmjoon76 said:
Thanks! it works..Great ! love u man
Click to expand...
Click to collapse
Love you too!

appelflap, could you make .cab file, which will reset changes to default, please?
First indexation wasn't succesful, so i want to reset this settings =(
(audioplayer indexate all 800 songs, but only 6 albums and 6 songers)

zahvatnik said:
appelflap, could you make .cab file, which will reset changes to default, please?
First indexation wasn't succesful, so i want to reset this settings =(
(audioplayer indexate all 800 songs, but only 6 albums and 6 songers)
Click to expand...
Click to collapse
Hi, uninstalling the cab files will remove the files that were installed.
(if you want to be sure, you can do it manually by deleting the shortcut to audiomanager_eng.exe in the windows/startup directory and/or deleting the files mortscript.exe autorun.exe and autorun.mscr from the directory 2577 on your storage card)
To force a fresh indexing of your music files, try to delete the AudioManager_Eng.vol file in the directory Application Data/HTC/AudioManager_Eng
it's a hidden file so you need to instruct file explorer to display hidden files.
BTW as a side note, your problem hasn't anything to do with the automatic indexing at startup. It's a general problem that sometimes occur with the music player. If it occurs use the above method...

Oh, i've forgotten about uninstalling
Thank you!

here is the final solution
http://forum.xda-developers.com/showpost.php?p=5937822&postcount=31

I'he intalled a new artemis Rom and the MP3 sens is not working properly, I can see every title but can't read more than 10 sec anx I have restricted access to artist liste

merci beaucoup