When i set data conection of, and go to internet data conection is active and it is ok.But if i closed internet aplications data conection of my provider is non stop active why.I think thet my battery is on lower state for thet.
+1
I also have this problem.
I gave this advice on another thread: you can use Advanced Config tool to close 3G session on idle, thanks to Menu > More Parameters > Connexions ...
Related
it is because i am worried that while roaming, the set may go on internet.. for example wayfinder..
tried the connection manager.. i switched data off.. but wayfinder just goes online itself..
any tweak or problem to enable me to :"lock" data access?
I have downloaded the "No Data" program from the below site and it works brilliantly, you manually go into the program and disable any connections you dont want active
http://www.modaco.com/content/xperi...4005/pauls-must-have-free-xperia-x1-software/
does it prevent the connection from becoming active or its only good for terminating connections after they connected>
cant seem to d/l it.. any direct links?
or anymore recommendations>
This program completly stops the connection being established in the first place. If you try to connect to the internet while the connections are disabled, you get an error message saying it wont connect to any networks and you have to enable that connection.
Sorry, i cant get any direct links at the min,
CommMgrPro lets you disable all the data connections automatically when your device is in roaming mode...
No Data works perfectly
No Data probably works 100% (haven't tried it), but here's what I do - go into Start --> Settings --> Connections --> Connections --> advanced --> Select Networks.
If your normal internet settings are called "My ISP", click new and create a blank group called "No Settings".
For both internet and work drop downs select "No Settings".
That way, when it tries to connect, it won't go through the "My ISP", but through "No Settings" (for which there aren't internet settings).
Hi guys,
I want my jade to check emails automatically, but only if WiFi is available.
I have no idea how to realize it in the setting. When using periodic check, my jade builds up a umts/gprs connection .
I don’t like to delete my GPRS profile or to insert incorrect settings, because I like to use it manually sometime.
Cheers,
ratsche
I guess you can do that in connection settings - connections - advanced (Einstellungen - Verbindungen - Verbindungen - Erweitert at my phone)
There you can set which connections shall be used automatically
you can set with following setting per my telco said:
-Start> Settings> Connections> Connections> Advanced tab> select Network tab> Network Management:
-Under Network Management screen, set both 'Programs that auto.... using' drop down list to "My Work Network".
i also use NoData in case anything failed to work so!
Lastly, i always check applications whether they are connected to gprs WITHOUT my notice.
surf77 said:
you can set with following setting per my telco said:
i also use NoData in case anything failed to work so!
Lastly, i always check applications whether they are connected to gprs WITHOUT my notice.
Click to expand...
Click to collapse
Hi,
thanks for your help. What do you mean by NoData, the setting in the communication manager?
I guess, you are checking applications manually?
Yesterday my moble used GPRS without my permission again :/ (without your settings). I started WiFi to connect to my Exchange server and for some sort of reason, my jade started a GPRS connection, though there was the WiFi icon. I realized the connection only via the "spb wireless monitor" and after the synchonisation.
Modaco NoData
surf77 said:
you can set with following setting per my telco said:
Lastly, i always check applications whether they are connected to gprs WITHOUT my notice.
Click to expand...
Click to collapse
Hi Surf77
May I know how you check if the application is connected to gprs, instead of Wifi or wireless LAN?? I asked because sometime I use weather update.
well i do not know what to do. I turn off data conection and connect to wifi - anyway any aplication using internet conection again turns the data conection on (gprs/edge) and i am connected this slow and costly way. It s ignoring the wifi connection. Is there any solution for this problem ?? from apps i have only installed fingerkeyboard 2. rom 1.14
(when i go to connections - it shows both connections internet CZ -(gprs,3g) and arlive_top (wlan) - in the same time.
Is there an app or setting that can automatically disconnect an active data connection? Would be nice for battery life reasons
Actually, I just found a setting in AdvancedConfig for setting timeouts on data connections. Works a treat
I have been trying for a long time trying to figure out a way to use Samsung Omnia Pro b7610 wifi connection for all applications which require internet connection like windows update, widgets, browsing internet. No matter what i do, it doesnt work, although I managed to somehow use wifi for browsing internet by using IE but no other service. When I go to "Manage my connection", it shows me no option for making a wifi connection, it only shows make/edit modem connection, VPN, proxy settings and if i go to advance settings it shows my GPRS connections only for editing, if I want to make a new connection, it asks me for dialing properties only related to modem.
Please help me out, what should I do. Another thing on the top bar where all the icons are displayed for network, battery, there is an "E" in a box, as far as I think it is my GPRS connection/data connection, but when I click on this icon it takes me to network settings where there is no option for disabling it, like it does in case of wifi icon.
Regards
Inder
when you create/edit your gprs setting, you need to make sure in the "select a modem", you are using GPRS. Then you will need to setup your access point. I.E., Tmobile would be either internet2.voicestream.com or wap.voicestream.com.
i have all the GPRS settings, which my service provider sent me and I saved them. It shows all the info like access point, user name, password but my problem is not this, I do not want to use GPRS at all, instead I want my wifi to be my default connection for all internet related tasks, I want to disable GPRS.
The icon for GPRS at top task bar which is "E" in a box, does not disappear no matter what I do, I want to pay for GPRS charges for accessing internet instead I want to use wifi for this purpose, please help me out to disable this E icon, when I click on it, it takes to network settings, where all the settings are like Select band, select network -manual/automatic, wifi, 3g- which I have turned off, no GPRS enable or disable function.
My problem is simple, i want to use wifi as a default connection like we do on our PC/laptop, so that all the applications which need internet access can use wifi instead of GPRS or data connection.
Regards
i have managed the same problem with a freeware named NoData
there you can enable & disable GPRS/WAP connections
google for 'modaco nodata'