Hi,
my Iolite has some Problems with bluetooth. I use bluetooth with naviprograms, such as Navigon 6.20 or iGO 8. With both programs I use an external TMC-Mouse (GNS 5843), which I connect over bluetooth over serial port 6. The connecting functions without problems, but after a time (sometimes after 5 Minutes, sometimes after 1 hour or so...) the connection breaks, bluetooth has stopped on the Iolite. When I switch it on again, everything is o.k. till the next break...
Has anyone else this problem and is there a solution?
oese
Related
I've bought your software MobileNavigon|5 ( This is not cracked version !!!!) . I've installed it on my Pocket PC MDA Compact ( ROM 1.11). I'm using it with BT Rikaline 6031-x7.
Here is a list with all issues / problems I've found in your software:
1. To designate and show the route from i.e. Katowice to Budapest, MN5 needs 117 seconds !!!!!
2. It is impossible to navigate using MN5 because it shows you information from the past. For example, I've stopped my car on crossroad and MN5 software showed me, that I drive my car with 37 km/h !!!!!. This is obviously readout from the past - like 10 seconds old or something.
3. When GPS is started, than MN5 works extremaly slowly and every operation - like pressing button or refreshing the screen - takes about 30 seconds !!!!!!
4. When Pocket PC switches off, you software looses BT/GPS connection. It is required to re-start software again to get it communicate with GPS back.
5. When MN5 starts my bt gps device ( RIKALINE 6031-X7 connected via BT), my Pocket PC cannot perform any other operation. I cannot make or pick up the phone call, cannot start pocket outlook, IE or any other software.
Any idea ?
Regards,
Darek
Is there anybody who can help me ?
I tried also with Socket BT GPS, result is the same.
I found Navigon5 forum, but I don't speak german at all
http://www.pocketnavigation.de/board/bid144-sid.htm
Desperate
Go to www.navigon.com, check international
go to service desk
pick the telephone number of your choice and you will get english speaking people who can help you out
A wired gps instead of bluetooth tends to fix these kind of problems, bluetooth is a great idea but I now always use wired gps for navigation because of the inherent problems with bluetooth.
but this BT GPS works perfectly with TT,Destinator and other navigation software except this f... navigon5.
I tested it with all GPS software ( VisualGPS, GPSTweak, WinFast Navigator) and everything is OK.
I found file spgps.ini file with settings
[Default GPS]
GPS=GGA_VTG
GPS1=GGA_VTG
GPS2=RMC_GGA
[GGA_VTG]
Type=NMEA
Name=GPS with GGA and VTG messages
Device=SerialPort
Input1=GPGGA,utctime,latitude,ns,longitude,ew,quality,satellites,hdop,altitude,,,,,
Input2=GPVTG,course,,,,,,speed,
[RMC_GGA]
Type=NMEA
Name=GPS with RMC and GGA messages
Device=SerialPort
Input1=GPRMC,utctime,,latitude,ns,longitude,ew,speed,course,,,,,
Input2=GPGGA,,,,,,quality,satellites,hdop,altitude,,,,,
speedMultiplier=1.851998
speedOffset=0.0
Preferable=1
[Operation]
OperationTimeOut=1
Autolog=0
Suspended=0
Speed=2.000000
LogDir=
AttemptsNum=3
[Matcher]
IgnoreOneWay=1
[Serial Port]
PortNum=5
Timeout=5
BaudRate=4800
[Parser]
AutoDetectTimeout=30
AutoDetectEnabled=1
AutoDetectInfinite=1
Is there anybody who knows what does it mean? Maybe by changing those lines it possible to start this **** working...
I sent them a lot of emails and still no answer... Their support works like their software
Darek
I am finding that I need to soft-reset my Universal, then launch tomtom again in order for it to auto pickup the GPS reciever and start working. When it does it's fantastic, I am well impressed with it all :wink:
If I stop the BT GPS, and go in a shop or whatever, then when I get back to the car and launch tomtom, ot just says no GPS device. Go to config screen and select COM 8 again and still nothing comes up. (yes, COM 8, I read the posts again on getting it to work, and I have COM 8 on my BT port setting - could this be anything to do with it. Is COM 0 special for any reason?)
The BT GPS device also is obviously not pairing up again; I can tell from the LED flashing lattern it is still in seek mode not paired.
Now on my GPSlim 236 there's no button to press to tell the GPS device I want to pair up again, like you would have on a headset, so I am relying on the two devices just recognising they are there and playing nicely.
So, I find I need to soft reset the Universal and restart tomtom and all is well again, until I go to a shop or something, and the cycle repeats.
I am also using a BT headset, a Bluespoon AX, and don't know if it's got anything to do with that.
I verified the behaviour again, and am wondering of anyone else is using both a BT headset and a GPS device, and if so, which COM port have you set the GPS to?
Setting the BT Port to COM0 did it
So, maybe tomtom has some auto search thing that works on a 'fresh' run of the app (as in after my soft resets), but not on subsequent runs.
With it on COM 0 , works every time! What a cool and froody app.
Hope it helps someone else.
Hi,
I've recently found my Qstarz BT-880 bluetooth GPS receiver and would like to use it with my Vario 2. I have managed to achieve this in the past but for some reason cant get the phone to stay paired with the device.
If I setup a partnership, the GPS receiver connects as soon as I hit ok and then about 10 seconds later it disconnects; I cant then get it to connect again short of deleting the partnership and starting again.
I also cant remember how you just search for bluetooth devices which you can connect to (other than creating a partnership), is this possible?
Anyone seen behaviour like this before/have any tips they can offer as I'm at a loss?
Thanks.
Hello,
After they have broken into my car i had to buy an new GPS receiver. In that case i bought the new Adapt AD850 receiver but somehow it is not working right!.
First of all i have an second PDA (HTC Touch) and on that one the GPS is working 100% fine without any troubles. Then what happens:
I am able to connect it by bluetooth and create the bluetooth profile (com ports and so on). So that seems to work .... after that i start any program that uses the GPS like TomTom or GPSTuner. It finds the GPS and get an fix and will let me navigate. 30 seconds later or so it will lose the GPS and has no connection for an short while. Again it connects and has an connection and will lose it again after an while. After about 3 lost connections the connections stay's and works fine and will stay working until i stop the program and start the program again.
I think it is not an software problem as 2 different programs have the same problem. Also it seems the GPS is fine as it works 100% on my other PDA. I also have changed the OS of my Wizard. I was running MB6 and that one worked verry fine with my old GPS. After noticing this problem with my new GPS i replaced the rom and it runs TNT last version now. But also then the problem still exists.
Does anyone have any idea what could be happening?
Thanx,
Jerome
Hi,
hopefully anyone has an answer to the strange bluetooth behaviour of my X1.
The first device is a bluetooth headset from Sony. It works good, if bluetooth is activated. But after some time of not using the headset, the phone just switches off bluetooth. Sometimes after a few minutes, sometimes days after my last use of the headset. I tried all settings of the bluetooth-settings with no change. And it sucks if with the next phone call the headset cannot connect anymore because bluetooth was switched off.
The second device is a GNS TrafficBox Plus FM9BT-Y. Somehow MN7 does not detect the device directly, so I have to use the workaround with the serial port and outgoing connection on COM1.
The initial minutes the connection works fine, but then stops and is not restored.
Here as well trying different settings changed nothing.
How can I find out the address of the bluetooth devices?
Is there a tool to further test bluetooth connections (like what speed can be used, the address of the device, etc)
Regards
pt
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
Im using Itjes Touch 7 final & i have the same problem - infact i've had it with the last 3 of his roms with my blutooth to SEAT car. I'll be on a call in my car & it switches the blutooth off without warning. generally after about 10 minutes of actual call time. But it doesnt disconnect unless during a call ? There is no rhyme or reason to it, it just sometimes happens?
So any further info will be appreciated
I have Ra2generic DE with the 1.10 radio ROM on it.
At the beginning it was fantastic not having the bluetooth issue. Everything was working so extremely goood... no switching off, no disconnecting of and from the bt headset,, etc...
After a while the issue was here again...damn! So the bt became not very useful in its functionalities.... then I saw that it was not possible to see through my bt freespeech device in the car the last calls on the phone... hm, ok I said. There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
i have the same problem, the bluetooth disconect without any reason, i have tried more than 10 Roms and i dont have any solution
¿is so dificult for Sony to repare this problem?
zagito said:
There were lot of calls (incoming, outgoing, missed, etc) on the list...I erased them all...
Now it is working in a perfect way.... no disconnecting, no switching off..and this with the stock ROM and Radio ROM.
I tried it a few months before posting it here... now I'm cleaning up my calling list every 2nd day (I really call a lot) and I have no problems..
Hope it works for you..
Click to expand...
Click to collapse
I hardreseted the device, installed the newest official firmware, deleted the calling list and with great expectations checked bluetooth behaviour.....nothing changed for me
But great it works for you and thanks for the tip
Come on people..... please someone help us with this
Bluetooth with clarion mind
Am having trouble connecting with my new Clarion MIND - is seems the phone does not see the profiles (very similar to the phone adding the older SE Bluetooth Watch, the 100). Has anyone built a .cab to sort this out?