Related
Guys - UK MDA Vario... cant get ANY GPS app to see my BT GPS. I have the Outbound port set as Com 6 but no apps can see it ( the port that is ) ... Any suggestions ?
TIA
PS tried Com 7 as well. ( and I've been working on this for 2 days now )
Terran
BTW Get a '?' next to the Bluetooth item the Qstarz BT-Q880 GPS... but it defo works on my PC.
Found this... http://www.bluetooth.jazztel.es/ - Going to give it a go...
Please download the latest version from the download area and install it. Just execute the installer. Afterwards you will find a new line for the power management on the today screen. Next time when you bond a Bluetooth device there will be an additional dialog after entering the pin and confirming the device name. Therefore you should first remove your device again if you bonded them already.
The "Today" screen
The icon on the left activates or deactivates Bluetooth. The clock symbol switches automatic power off for Bluetooth on or off. When activated (white backround as in the picture) then Bluetooth will be switch off after 60sec of inactivity.
The two battery icons on the right side let you switch between two profiles for auto power off of the PDA and the back light. For example you may switch to the second mode and adjust the settings to "always on" and "never switch back light off". Thereby you can switch the PDA with one simple to "always on" when you are in your car and want to use GPS navigation.
The profiles
Add your Bluetooth device as usual. You will get now a new dialog after the last step:
Please note that currently only the following profiles are available
Headset/Car kit Serial port ActiveSync Modem
Headset/Car kit
With this profile you may use your headset or car kit to make phone calls. Both headsets (headset profile) and car kits (handsfree profile) are supported and you may use up to 9 devices.
Bluetooth is switched on automatically on incoming calls. However it take some seconds until the connection to the headset/car kit is established. If you leave Bluetooth always on there is no delay.
The call is passed always to the device where you take the call. This means if you answer with the PDA button then the built-in speaker is used. If you used the headset button the call will be passed to the corresponding headset.
To pass the call from the PDA to the headset or from one headset to another just press button of the corresponding headset.
To hang up just press the button on the currently active headset or use the PDA button.
Obviously you can only dial via headset if you leave Bluetooth always on. The button on the headset acts like the phone button on the PDA. This means pressing it the first time switch the PDA on (if powered off) and switches to the phone application. Pressing the button again dials the last number.
Serial port
With the serial port profile you can use a device, which emulates a serial port, like a GPS receiver for example. After marking the checkbox you can select the desired port. Just click on OK and now your serial port is ready to use. Just start your application and choose the same port.
ActiveSync
Just mark the checkbox below ActiveSync and click on OK. Now start ActiveSync from the Start menu. There is now a new entry in the menu of ActiveSync to use the Bluetooth connection. Naturally this connection uses data encryption to protect your data.
Note: To use the ActiveSync connection you must identify the virtual port on your PC and configure ActiveSync accordingly.
Modem
I could not try this function because I don't have a Bluetooth modem but it should work without any problems. Just mark the checkbox and click on OK. Now your modem is ready to use.
Click to expand...
Click to collapse
Terran
You probably need GPS software that is compatible with Windows Mobile 5. However, most of them are not entirely updated to support WM5 just yet. I hear some people have gotten Navigon to work, and TomTom with a huge workaround. Destinator PN5 doesn't see the COM ports. iGuidance 2.1.3 works beautifully except for the map-loader not working through ActiveSync 4.x.
try looking at this link....
http://forum.xda-developers.com/viewtopic.php?t=29606
aliendad said:
try looking at this link....
http://forum.xda-developers.com/viewtopic.php?t=29606
Click to expand...
Click to collapse
Thanks - seen it...
Followed
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In the GPS control panel, select the GPS program to 6 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 6 free. Select COM 6 and close TT5.
5. At the GPS control panel again, now select COM (none)
6. At BT: select OUTGOING port to 6.
7. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Manged to see the com port in Tomtom but would not get it to see the GPS.... I'm still wondering becuse of the ? next to the item under the BT Control pannel...... I'm wondering if for some reason it does not recognise this as a GPS and is refusing to talk to it.
That been said it does have serial profile and connects ok...
Terran
it is a bit strange? but officialy TomTom is not mobile 5 ready.
aliendad said:
it is a bit strange? but officialy TomTom is not mobile 5 ready.
Click to expand...
Click to collapse
thats my point... its not just TT that has the issue - tried some really basic progs just to show reception and get the same... ahhhhh
Terran
tomtom doesn't need bt to be enabled on the pda, and if you forget this, (like i used to) other programs wont work if bt is not enabled on the pda
aliendad said:
tomtom doesn't need bt to be enabled on the pda, and if you forget this, (like i used to) other programs wont work if bt is not enabled on the pda
Click to expand...
Click to collapse
But can you have it enabled with Tomtom ( if I follow you ? )
Terran
aliendad said:
tomtom doesn't need bt to be enabled on the pda, and if you forget this, (like i used to) other programs wont work if bt is not enabled on the pda
Click to expand...
Click to collapse
This comment was usfull - I removed the BT support from Tomtom and the other progs 'VisualGPS' can now see it.... still working on Tom tom though
Terran
EDIT Yaaaa it works...
Upgraded to 5.1 and sussed... so overview for my Vairo install proceedure ( 3 days this has took lol )
Enable the GPS control pannel - but TBH I dont think you acutally need this any way
Added GPS as per prev threds ( ie Add com 6 etc )
Install Tomtom but not the BT support pack
Install the update
Set GPS settings
Job done
Terran
Hi,
I've trawled the forum and I've followed all the TomTom setup procedures. The Problem is they seem to be for people who can't get TomTom working at all. I can get it working, just awkwardly.
Once I pair with my GPS receiver and go into TomTom i can get a connection. However when i quit TomTom and turn off the GPS it seems to forget. Next time I turn it on I don't get a connection.
The way I understand TomTom is that it seems to wait for the GPS receiver to contact the phone. This seems odd as I would have thought the phone would be the one to initiate contact.
Anyway my GPS receiver just seems to forget what phone it was connected to. TomTom obviously isn't forgetting the port, windows obviously isn't forgetting the pairing. But Every time I use it I have to re-pair the receiver (thus reminding the receiver of the phone it's supposed to be bonded to). It's beginning to drive me a bit insane.
Anyone else have this issue? Perhaps it's to do with my incoming and outcoming ports? Hopefully someone has already solved this? Not seen any references to it anywhere.
Lewis
Hello,
Which version of Tomtom are you using ? The last one (5.21) ? If not, try to upgrade and try again.
Yep 5.2 latest release.
I was hoping upgrade would fix it but alas no.
Lewis
BigDamHero said:
Yep 5.2 latest release.
I was hoping upgrade would fix it but alas no.
Lewis
Click to expand...
Click to collapse
Don't mean to be picky, but 5.2 or 5.21?
I've held off installing TTN on my Wizard, as it works fine on my iPAQ 4700, I have a cradle for that, and according to ttcode, my current device is actually my old 3970, not the current iPAQ... Last week, I had a couple of hour drive to do, so I thought I'd give it a whirl. After an email exchange with TomTom support (who were more helpful than I'd originally given them credit for), I had a new activation code for the Wizard. Here's what I did, from a fairly recent hard reset with no previous TTN install whatsoever. Skip the mail if it doesn't look helpful, but I'll detail my steps in case it helps anyone else...
Although I believe the PC install is mended in 5.21 I copied the map and voice cab files from the CD to my SD card and installed them from there. The GPS drivers and main app I installed from the download I got from the TomTom support site by running the setup util on my PC. Once everything was installed, I moved the maps which seemed to finish up in a sub-directory on the card to the root of the card.
I paired the GPS (my old Emtac BT one) and selected serial port profile. I tried all the offered serial ports in the "Other BT GPS" list in TTN but none worked. Then I went to 'COM Ports' in Comm Manager/Bluetooth Settings and selected "New Outgoing Port". I picked the GPS from the list of paired SPP devices, and it created a new BT COM port on COM6. That definately hadn't been in TTN's list of BT com ports before, but is now there in the list with about half a dozen others. I selected that in the "Other BT GPS" list of BT ports, and TTN connects to the GPS each time.
As I said, I'd recently hard reset the device to try and prove a problem with my BT car-kit soit's quite possible the clean install was the secret, but try creating a new outgoing COM port against the GPS and see if TT remembers that...
Dox
BigDamHero said:
Hi,
I've trawled the forum and I've followed all the TomTom setup procedures.
Click to expand...
Click to collapse
Which?
There are 2 general ways to set it up, 1 works 100% (i use it so know it does ) 1 i dont use and have never tried so may well work in the reverse direction and be causing you errors.
The way i set up tomtom; pair the BT GPS. Open an OUTGOING port to the BT GPS, set my GPS as OTHER (wired/cable) NEMA device (NOT bluetooth) in TTN5. now my tomtom connects to the bluetooth, not the otherway round. This method has thrown up no errors for me at all.
If you have followed the reg edit/hack to show the GPS page in connections then i dont know how the settings differ and the possible results this could have on connection issues.
Let us know which way you are going
I have the exact problem as BigDamHero. Each time I wanna use TTN, I need to delete the previously paired BT GPS and then pair it again, otherwise the TTN will just say No GPS Device. I use TTN v5.21 and Wizard with Windows Mobile 5. I tried my BT GPS device on my brother's PDA which runs on Windows Mobile 3, and it connects like a gem every time. I am also looking if anyone has solved this issue, cos it is tedious re-pairing every time.
Had the same problem until 5 mins ago! Found an explanation in another thread, but only in Dutch..
Here's how to do it:
Turn on GPS
Activate bluetooth on device, go to BT parameters, delete previous pairing like you're used to
Create new pairing, choose GPS, enter passkey, check Serial port in services, go to COM ports and add outgoing port (e.g. COM6) like you're still used to :roll:
Add an incoming port too (e.g. COM7) <-- Here's the trick!
Set your GPS apps to use COM6 (the outgoing one)... and here you are! This time it will work, you can turn off GPS and device bluetooth, turn on again and it will connect by itself.
If you want a bit more you can activate GPS panel, set program port to COM8 (then you will have to use this in your apps) and COM6 as hardware port.
Everything works fine now!
hey man, wot a coincidence....i also just read that post which had the dutch explanation.....BUT however, it's not working for me.
toneslee said:
hey man, wot a coincidence....i also just read that post which had the dutch explanation.....BUT however, it's not working for me.
Click to expand...
Click to collapse
I did everything in the list except for creating the incoming port and it still works everytime (I know that's no consellation to you). I wonder if something else you've installed, or the way you installed the app is causing the problem? Is it worth a hard reset and trying the entire install on a clean wizard?
Dox
A friend didn't need the incoming port either. I believe it has something to do with the GPS, as he has a different brand than me.
With mine, before adding the incoming port if I started an app without erasing/redoing the pairing before I would get a notification saying "Navman GPS wants to connect" and asking me to pair. It would keep coming every 10 seconds whatever I did.
BigDamHero, what brand / model of GPS is it?
Maybe we can see if anybody here, or over on pocketgpsworld has been able to make the same combination work and if so, what they had to do to get it to fly...
Dox.
well, tomtom was the very first thing I installed when I got my new vario. it was only after I got tomtom fully working (but still need to re-pair everytime), then I installed a couple of simple Card games.
toneslee said:
well, tomtom was the very first thing I installed when I got my new vario. it was only after I got tomtom fully working (but still need to re-pair everytime), then I installed a couple of simple Card games.
Click to expand...
Click to collapse
A quick glance at pocketgps suggests others are having similar issues. There's a thread here that suggests leaving it a while, and I seem to remember other GPS issue threads saying power up the GPS and let it get a fix before starting TTN. A more detailed probe round the forum will probably show more of the same.
Dox
I've just flashed my Qtek 9100 to a new ROM, (the O2 one), and since then I've been getting this same problem. With my previous ROM everything worked fine. I was able to turn of either my PDA or GPS, and they would always auto-reconnect in a few seconds. Looks to me like something broke during one of the ROM changes. Which ROM versions does everyone with/without this problem have?
By the way, I have a BT77 GPS.
Hey sorry for the total lack of reply. Been snowed under with exams.
Ok I tried most of what you guys said but didn`t work. BT ports aren't available to select as hardware ports.
However I have managed to solve it. The key was to pair the GPS, and create an UNENCRYPTED OUTGOING port. That's all. Previously I had encrypted ports outgoing and incoming. My GPS applet in control pannel is set to none so it,s nothing to do with that.
I don't know what my GPS is. Its unbranded. One of the cheap common ones.
Hope this helps some people with the same problem.
Lewis
Hi
I have read through literally hunderds of pages of GPS stuff to do with mini. I have read some things that are true and some that aren't and am now confused.
I installed Tomtom 5.0 onto my Mini S. It went on fine. Maps installed fine. I went into 'satellites - configure' part and couldn't find my GPS on any of the settings. I am almost sure my GPS receiver isn't bluetooth. I know the baud should be 4800, but otherwise I am not sure. My dad has the same recieve but uses his with an IPAQ and it worked first time. I have tried my receiver with his ipaq and the receiver works fine so that eliminates that posibility.
Here is my receiver and the blurb that comes with it.
http://www.evermoregps.ca/
GM-R700 GPS receiver
(third one down.)
The mouse-shape GPS receiver is design for PC and PDA applications. With WAAS/EGNOS channels, EverMore can give you more accurate direction and position. Compact Flash module is also available now.
I selected 'Other NMEA GPS receiver' and tried all of those. Then went through the bluetooth equivelent just in case. None of them pick my receiver up.
I then read somewhere that version 6 of Tomtom wouldn't work on my XDA mini. I downloaded 5.2 and tried it with that. I had read that this allowed 'port 7' to work. I couldn't get my map to work with 5.2 even though I spent ages on it. Eventually I tried Tomtom 6.0. As I mentioned earlier, someone had said that it wouldn't work on an XDA, but this is false as I got it working straight away. The map also installed fine and once I activated it things seemed ok. I presumed that the port 7 would now come as an option. It didn't. I am still at the same place. I believe that the port 7 thing may be a bluetooth only thing but I am not sure. I am not great at GPSbut know my way around an IPAQ pretty well. I am new to my phone so chances are there is some gateway or something that I haven't enabled etc, but I am at the end of what I know.
If anyone can help me out at all I would be eternally greatful. So far I have spent a good 20 hours getting the bloody thing working and I am about to lose the will to live.
I have used the search option on the site, but it seems everyone has BT GPS, and none of the posts seem relevant to my problem. If I have missed a post then I am sorry, but there are a fair few posts on the site now.
Thanks in advance,
Woody.
bluetooth
you have to pair your gps receiver with your phone in bluetooth settings give it com ports then go into tomtom then into show gps status then configurethen other bluetooth gps receiver then pick your com port hope this helps
jay05 said:
you have to pair your gps receiver with your phone in bluetooth settings give it com ports then go into tomtom then into show gps status then configurethen other bluetooth gps receiver then pick your com port hope this helps
Click to expand...
Click to collapse
Do I have to do this even though it isn't a bluetooth device?
Even when I enabled com 7 on bluetooth settings, comm 7 didn't appear on 'Select your GPS receiver' on Tomtom.
I will try it anyway, and thanks for the speedy response.
sorry
i have give you wrong advice i thought gps recever wash bluetooth you should try going into on your phone settings, connections ,beam ,and un tick receive all in coming beams as these frees up the com port 7 on xda1.YOU WILL HAVE TO RECONFIGURE SETTINGS IN TOMTOM GPS STATUS FOR WIRED GPS RECEVER. SORRY FOR LAST POST HOPE THIS HELPS ps i got gps recever recever off ebay was meant to work on my xda1 but did not it was for ipaq the connector was the same but wiring was wrong hope this helps
Woody, first of all I couldn't understand that which GPS device have you got as you have mentioned 3rd down on that webpage, anyway I have the attached the picture of one of the device named "GM-R700", if this is the right device which you have then this is a serial cabled GPS device which connect to the device via cradle, not via Bluetooth, if I am right then bluetooth chapter is closed, we are going to talk about the cable GPS device.
If it is the right device then how are you connecting the GPS device to the XDA, does the GPS device came with the cradle and the car charger? (it must be).
Find the attached word file for a sequential instructions, I have just made it for you and others who are still stuck to make their TomTom work.
GoodLuck & let me know.
Sidd
Sidd, your attached documents refuse to open!, I am not too sure that you can connect a wired GPS to this type of phone, it simply won't work, the only option is Bluetooth for the Wizzard. In the case of the IIi and IIs phones they had a true serial port that could be used - Mike
Try these attached files as I have zipped them on a normal compression.
I think ""GuinUK (1st post)"" hasn't mention his/her device, but the GPS he/she mentioned is a serial device.
Sidd
I am pretty sure it is a Mini S he is trying to get to work with the cabled GPS receiver, it simply will not work - the device doesn't have a serial port to connect equipment like this to. The Mini S is Bluetooth only for GPS AFAIK - Mike
sidd said:
Woody, first of all I couldn't understand that which GPS device have you got as you have mentioned 3rd down on that webpage, anyway I have the attached the picture of one of the device named "GM-R700", if this is the right device which you have then this is a serial cabled GPS device which connect to the device via cradle, not via Bluetooth, if I am right then bluetooth chapter is closed, we are going to talk about the cable GPS device.
If it is the right device then how are you connecting the GPS device to the XDA, does the GPS device came with the cradle and the car charger? (it must be).
Find the attached word file for a sequential instructions, I have just made it for you and others who are still stuck to make their TomTom work.
GoodLuck & let me know.
Sidd
Click to expand...
Click to collapse
Thanks for your reply. This is indeed the right GPS. Sorry for any confusion there. I am about to try what you have written. I have indeed got a cradle, and a converter which makes my Ps2 GPS fit into the socket.
I will get back to you with how I got on.
Thanks again for the help, at least I know for sure it isn't BT before I start.
Woody
mikealder said:
I am pretty sure it is a Mini S he is trying to get to work with the cabled GPS receiver, it simply will not work - the device doesn't have a serial port to connect equipment like this to. The Mini S is Bluetooth only for GPS AFAIK - Mike
Click to expand...
Click to collapse
OK I got the download working from Sidd, thanks. I ran through all the steps you had mentioned. The problem I had is that I don't get the option of 'serial cable blah blah', mine just says 'Serial port'.
My phone is a Mini S. Perhaps this is the reason why. My friend has a bluetooth model, and I got that working fine so I guess if this last attempt doesn't work I will just buy another GPS. It isn't like they are expensive in truth.
Thanks everyone for the help, and sorry for my delay in posting but it being Xmas and all.
Cheers
Woody
If u r going for a bluetooth gps device then keep one thing in mind that u might find difficulty in searching of the proper bluetooth com port. Soltution is to download the TomTom version 5.2 prior to connect ur device.
GoodLuck & let me know
Sidd
Fantastic post
Thanks Sidd, your word doc (Serial COM Port setting to setup TomTom.doc) worked a treat, two mins and I'm up and running. I'm using spv m1500 (same as xda 2) with a cheap unbranded cabled gps unit i got from fleabay and TomTom 5.2. Thanks again.
Can I re-iterate for the benefit of others reading this post, the newer XDA device (equipped with a mini USB connection point) cannot be used with a wired GPS unit, this includes the Mini-S, Exec, Orbit etc. The older devices IIs, IIi etc all require the Receive all beams to be turned of to free up the serial port for use by the wired GPS.
If your device has a mini USB connector your only option is Bluetooth for GPS - Mike
Doc114 said:
Thanks Sidd, your word doc (Serial COM Port setting to setup TomTom.doc) worked a treat, two mins and I'm up and running. I'm using spv m1500 (same as xda 2) with a cheap unbranded cabled gps unit i got from fleabay and TomTom 5.2. Thanks again.
Click to expand...
Click to collapse
No problem Doc114 my pleasure, any way I am also going to upload something new on the FTP (check in: ftp://ftp.xda-developers.com/Uploads/Software/) with another brief instruction manual, enjoy the new one, you know what I mean (My name would be included in the file name, so you can recognise it easily).
I will also make one illustrated instruction for a bluetooth GPS setting whenever got a device.
Sidd
Hi
I just bought an GPS-Mouse, in order to make TOMTOM usefull.
It worked a couple of days ago, but TOMTOM can't find the GPS-device now.
Does somebody have some usefull tips for me?
(GPS mouse is a Adapt AD-500 GPS Bluetooth receiver)
Cheers
I only use holux, but try restarting phone that usually helps
xboxhaxorz said:
I only use holux, but try restarting phone that usually helps
Click to expand...
Click to collapse
Yup same here, Holux M-1200 with iGo MyWay software. But are you sure you set up a secure connection with the bluetooth and set it as a com port 6 or 7 with the correct baud rate? Did you follow everything step by step in your manual for the tomtom?
Well, I tried to follow the manual, but it didn't really help me. There was very little information in the manual, and the information in it was not very clear. The fact is, that it worked a couple of days ago, and now I cannot connect anymore...
I have a motorola BT GPS, supposedly motorola is rock-solid, but I've had troubles with it at times. Rebooting the phone would work occasionally, turning off the GPS would work occasionally, turning off both would work occasionally, if you get the picture, no ONE thing did it each time.
Recently, I found Franson GPSGate (the full version) This keeps a good connection with the bluetooth GPS better than it ever has been before, even when walking away from and then back to the gps device. It also generates a comport that multiple GPS programs can use at once. Very handy little program.
Hope it helps someone.
itrek bluetooth for me....
Do you know about the settings, External GPS icon on the Wing? Go in there and make sure you've got com port set i have mine at program port 6 which is where most gps like to sit for some reason but if it's not working for you play with that setting unfortunately it's trial and error but play with it. I don't know what you'd need "hardware port" for but since you're using a mouse and not a bluetooth unit can't hurt to play with that too, and in the last screen be sure you've got "manage automatically" checked, or maybe you need to uncheck it. All stuff to play with. Did you put any software on lately that could have hosed something? Did you try reloading tom tom? See if you can find one of those freeware utilities that talk to the gps unit and see if it can find it.
This device doesnt have a internal gps correct ? I always thought it didnt but I see some people talking as if it does. Then again, you all wouldnt be buying externals if that was the case.
I opened this thread to sign here all the BT problems found on our BA using WM6.5
I'm using Radio 1.13 on WM6.5 21198. I can pair a Qstarz 51channel GPS antenna correctly, but after the pairing the device remains disconnected. After checking the Serial Port box in the device settings i'm able to tap on 'Connect', but then the BA always report 'Unable to connect, connection failed or password wrong'.
I tried with Broadcomm stack b3900 but i get an error on startup about 'Storage' file being deleted or something else.
I tried with Helmi BT stack b3400 and it works: i can pair and connect. However connection seems to be unstable and after a few i get the device disconnected automatically, i don't have even the time to set up correctly Navigon Navigator. After a SR sometimes i get 'Unable to turn on bt cous of lack of memory, try to sr... blablabla'. Sometimes i have to HR to leave this error message.
better experiences?
I never use the CONNECT in the BT Settings to connect to my Holux GPSlim236. I just Add New Device... then set the COM Port to port #6, then go to Start/Settings/Connections/External GPS ... Under the Programs tab (Select NONE), under Hardware tab (Select the COM Port you set on BT, in my case COM Port 6), on the Access tab (Mark Manage GPS Automaticaly. Then I go open whatever GPS Software I'm going to use, and it usually connects to the GPS Reciever automatically. [edit] If it doesn't connect, then I go to the settings of the GPS Software and I tell it what my GPS Reciever COM Port is. I usually have to do that with Live Search and iGO8(all though iGO8 has a search for GPS that always finds it too)[end edit] However, from the best of my memory, I have never seen my GPS listed as CONNECTED. So again, I don't think you need to try to Connect on the BT Settings page. Give it a try, hope this helps.
Another option is to contact Qstarz support and ask them how to properly set up your GPS on WM6+. They should be able to walk you through.
[Edit:] I will test tonight if I get that error message by trying to use the CONNECT funtion on BT Settings. Also, I'll see if when the BT GPS Receiver is connected, if it shows on BT Settings as CONNECTED. I'll post back my findings as an EDIT to this post.[End Edit]
<Edit> I've done some further testing as promised. Here is my finding:
*When the BTGPS Reveiver is connected to the phone, there is no indication on the BT Settings as that it is "Connected", however it is, as Live Search, Pharos, iGO8 and Google find it without any troubles.
*I tried to highlight the GPS Receiver and tap on CONNECT, but the softkey is greyed out(not available).
*I tried tap n hold over the Receiver with the same results, connect is not available.
I have not noticed any problems with Blue tooth on build 21198.
Same problem to me with Jentro BT8.
Now trying HELMI_BA_BTstack_Build 3400.CAB.
Hope this one works.
frafor said:
but after the pairing the device remains disconnected. After checking the Serial Port box in the device settings i'm able to tap on 'Connect', but then the BA always report 'Unable to connect, connection failed or password
Click to expand...
Click to collapse
I am also having the same problem. Is there any fix for it. Can some one get xplode to help us with same problem
kabbab said:
I am also having the same problem. Is there any fix for it. Can some one get xplode to help us with same problem
Click to expand...
Click to collapse
Read markanthonypr's and frafor's posts above. Those are the only two solutions found so far. I am currently trying out markanthony's solution and so far it seems to work. I'll have to do some further testing.
I've been able to connect my GPS using helmi's b3400 stack, the connection is far stable but i have to set up the GPS ports fast, then open Navigon Navigator because otherwise the GPS enters standby mode and it looses the connection. However in these days i'll try the new build
markanthonypr: i too use 'add new device', but after the wizard procedure the GPS is listed under 'Disconnected devices' so then i have to check 'Serial port' service and tap 'connect'. Here i get the error message.
frafor said:
I've been able to connect my GPS using helmi's b3400 stack, the connection is far stable but i have to set up the GPS ports fast, then open Navigon Navigator because otherwise the GPS enters standby mode and it looses the connection. However in these days i'll try the new build
markanthonypr: i too use 'add new device', but after the wizard procedure the GPS is listed under 'Disconnected devices' so then i have to check 'Serial port' service and tap 'connect'. Here i get the error message.
Click to expand...
Click to collapse
Have you tried w/o checking the Serial Port? I don't check the serial port. I just tried what you've stated, and got the same error you are talking about. But like I said, It connects to BT GPS Receiver w/o the Serial.
markanthonypr said:
Have you tried w/o checking the Serial Port? I don't check the serial port. I just tried what you've stated, and got the same error you are talking about. But like I said, It connects to BT GPS Receiver w/o the Serial.
Click to expand...
Click to collapse
Well mark, you were right on the money with your suggestion. It seems that 6.5 controls external gps devices from within that option in the settings rather than the BT console. I am using Destinator 7 with my Pharos BT GPS and aside from taking a few minutes to connect, it works like a charm once it does connect...
egzthunder1 said:
Well mark, you were right on the money with your suggestion. It seems that 6.5 controls external gps devices from within that option in the settings rather than the BT console. I am using Destinator 7 with my Pharos BT GPS and aside from taking a few minutes to connect, it works like a charm once it does connect...
Click to expand...
Click to collapse
LOL well I'm glad yours is working. I tried using Frafor's method, got his same error, went back to the method I always use, and now it won't connect LOL blah... I'm sure it will after a soft reset.
Speaking of soft reset. I've been searching all over for the darn XP ShutDown and can't find it. I know its here, but, why can't search find it? I wouldn't dare to ask you to point me in the right route, would you think I had the guts to as that? "Giggling"
Edit: Oh and I did use the Search !
i attached it for you, but be aware of the fact, that this is the basic version with a very xp like look for themes and how to install them go to: http://ppcsoft.narod.ru/english/
markanthonypr said:
LOL well I'm glad yours is working. I tried using Frafor's method, got his same error, went back to the method I always use, and now it won't connect LOL blah... I'm sure it will after a soft reset.
Speaking of soft reset. I've been searching all over for the darn XP ShutDown and can't find it. I know its here, but, why can't search find it? I wouldn't dare to ask you to point me in the right route, would you think I had the guts to as that? "Giggling"
Edit: Oh and I did use the Search !
Click to expand...
Click to collapse
I wouldn't dare to tell you to search... you know better than that
As far as the BT, it seems that it isn't a matter of drivers after all, but rather how 6.5 is handling them. Stick with the original drivers, I think that there are a few surprises in stock with the other BT stacks (Helmi's and broadcomm's)
Also, if I could recommend you Destinator 7, it seems to do just fine. I haven't tried Tomtom 6 or iGo 6 (all of which I used to use), but this one is very lightweight and the maps are not ridiculously big either.
Good to see you around buddy!!
Chef_Tony said:
i attached it for you, but be aware of the fact, that this is the basic version with a very xp like look for themes and how to install them go to: http://ppcsoft.narod.ru/english/
Click to expand...
Click to collapse
Thank you very much Tony!
egzthunder1 said:
I wouldn't dare to tell you to search... you know better than that
As far as the BT, it seems that it isn't a matter of drivers after all, but rather how 6.5 is handling them. Stick with the original drivers, I think that there are a few surprises in stock with the other BT stacks (Helmi's and broadcomm's)
Also, if I could recommend you Destinator 7, it seems to do just fine. I haven't tried Tomtom 6 or iGo 6 (all of which I used to use), but this one is very lightweight and the maps are not ridiculously big either.
Good to see you around buddy!!
Click to expand...
Click to collapse
Oh, I'm happy with iGO8 and the sexy female voice I have LOL and LiveSearch works awesome as well. They just updated again few weeks ago. Only thing I don't like about LiveSearch is it only saves 128MB on Storage Card. Everything over that gets downloaded on the spot and with the slow G connection of BA's, it can become a pain at times. But iGO8 Maps cover PR very well However, just to be nice, I'll try destinator. If you recomend it and Tony Cooks it, I'll eat it LOL
Umm btw, let me scoot to work... Later aligators
EDIT: Geez, I always have a second thought after pressing that darn Post Reply. I installed NF, its the same I had. Haven't seen any noticeable difference. A little higher build... Poofff Gone!
markanthonypr said:
<Edit> I've done some further testing as promised. Here is my finding:
*When the BTGPS Reveiver is connected to the phone, there is no indication on the BT Settings as that it is "Connected", however it is, as Live Search, Pharos, iGO8 and Google find it without any troubles.
*I tried to highlight the GPS Receiver and tap on CONNECT, but the softkey is greyed out(not available).
*I tried tap n hold over the Receiver with the same results, connect is not available.
Click to expand...
Click to collapse
well, when i'll flash to new build then i'll try this thanks
nothing to do, the GPS connects (1second flashing blu light), then the BA stucks on the passphrase window with the wait cursor, the GPS disconnects (fixed blue light) and then it enables standby mode...
frafor said:
nothing to do, the GPS connects (1second flashing blu light), then the BA stucks on the passphrase window with the wait cursor, the GPS disconnects (fixed blue light) and then it enables standby mode...
Click to expand...
Click to collapse
I use TomTom Bluetooth GPS and have not faced this issue.
Chef_Tony said:
i attached it for you, but be aware of the fact, that this is the basic version with a very xp like look for themes and how to install them go to: http://ppcsoft.narod.ru/english/
Click to expand...
Click to collapse
psShutXP is a bit annoying. I use this cab to soft reset & power off which is quite ideal for WM6.5 start menu I have repacked the cab files.
I've got the same problem and I think this is a problem GPS with MTK chipset. I've try 2 diferent GPS (qstarz and pentagram ) with MTK chipset and bouth work correctly only with WM2003 or on WM 5/6 from helmi with Helmi BT Stack 1,7.
With many ROMs GPS connect corectly and work to soft reset. After reset GPS connect for 1-2 sek and disconnect. It doesnt mater setting in GPS devices so i thing this is problem with receving BT data in our devices.
Also I try GPS from nokia LW-3 (or something like this) with sirfstar III and it connect without problem with diferent ROMS
I have a different problem since upgrading to Xplode's WM6.5 v21202...
I have working connections (not all at the same time) to three BT devices; Qstarz 51 ch gps, my old Tomtom BT gps, and the Stowaway (Think Outside) BT keyboard. All exhibit the same problem:
After a few minutes the connection seems to go and the device loses communication. It will then reconnect and continue fine for a while then same loss as before. This is particularly annoying when I'm using Tomtom to navigate!
I have not set up a serial connection for the Tomtom gps but did so for the Qstarz and keyboard. they all have the same comms loss.
I also have another BA running WM6.1 and this is fine with the devices...
Any suggestions please?
Thanks
Stevemann said:
I have a different problem since upgrading to Xplode's WM6.5 v21202...
I have working connections (not all at the same time) to three BT devices; Qstarz 51 ch gps, my old Tomtom BT gps, and the Stowaway (Think Outside) BT keyboard. All exhibit the same problem:
After a few minutes the connection seems to go and the device loses communication. It will then reconnect and continue fine for a while then same loss as before. This is particularly annoying when I'm using Tomtom to navigate!
I have not set up a serial connection for the Tomtom gps but did so for the Qstarz and keyboard. they all have the same comms loss.
I also have another BA running WM6.1 and this is fine with the devices...
Any suggestions please?
Thanks
Click to expand...
Click to collapse
Try a different BT stack. Some people have reported improvement in certain areas of functionality. However, everything comes at a price... the same people have reported that the range stinks. You will not be able to get much further than a couple of feet from your BA. Hope this helps...