Related
Hey there, just want to say before I tell you my problems that this forum is cool. I recieved a lot of useful information and tools for my phone here. Thanks.
Onto the problems!
Okay so first of all, I was given an HTC Vogue on the Telus network from a buddy because my previous phone fell in the pool. I was having a blast with this phone, 'twas the best thing that ever happend to me.
Now before I get into specifics, I'd like to mention that I've never been able to connect to activesynce because the computer would not recognize the USB cable. I've never been able to fix that problem.
Recently I've been having problems with my phone. Sometimes it would take a little spill onto the floor from my lap because I'd forget it's there or whatever. The back casing would come off and the battery would come out. No worries, I would just pop it back in and off I go. But this time it would boot up to the Telus screen with the buncha red writing.
Code:
M 03
B 01
P DCAAXOM-4350H
R 3.41.00
D 3.07
After that text disappears, the phone would freeze at the Telus screen and either: a) No LEDs would flash b) a yellow LED would come on c) THe phone would be left on that screen and just shut off after a while.
So i did some research and found that I could preform a hard reset. Voila! It worked like a charm and I was off using my phone again, but it had barely been 24 hours before the phone froze and I had to reset. And the phone would revertback to the previous problem. Hard reset would NOT work. It would reset the phone but still freeze. Sometimes it wouldn't even stay on the hard reset, the phone would shut off as soon as I release the SEND button after holding all fo the hard reset buttons. So i went back here and on Google to look for the fix.
I've done a bit of research on possible fixes to my phone like disassembley of the phone and the placement of plastic sheet over a processor of some sort and flashing the ROM.
So what I did was look up some custom roms and what not. From what I understand you need a CID Unlocker before custom roms can be used. I looked around and found that I need the USB connector to work for the phone to become unlocked. But this conflicts with my current situation and whenever I try to flash with a custom rom from the microSD, it takes me to the Loading... screen and stays there without any mention of flashing a ROM. This is also the case when I try to put the CID Unlocking .nbh on my microSD card.
So I ask what I can do for my phone to revive it. I've done extensive searches on any fix to my phone with little or no result. I need some fixes fast because I have a tonne of important calls coming in that I need to answer. I will not accept that my phone is dead.
Please guide me in the direction on how to unlock the CID with a microSD card. Or just anything that'll enable me to use my phone again. I con't afford ot buy another one.
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11[/QUOTE]
I gather that you can get to the boot loader screen by the above info. While on that screen try pluging you cable into a direct USB port on the computer and then into the phone. If your phone is recognized it will change from serial to USB at the bottom of the multi color screen. If that doesn't work let me know.
Also here is a link for the unlocker for the CDMA Touch on PPC Geeks
http://forum.ppcgeeks.com/showthread.php?t=20370
whitey10tc said:
BTW
The info on my boot loader screen reads.
VOGU100
SPL-2.01.0000
CPLD-11
Click to expand...
Click to collapse
I gather that you can get to the boot loader screen by the above info. While on that screen try pluging you cable into a direct USB port on the computer and then into the phone. If your phone is recognized it will change from serial to USB at the bottom of the multi color screen. If that doesn't work let me know.[/QUOTE]
I've tried that. The phone reads USB but the computer can't recognize the phone. Activesync won't work either.
EDIT
I've tried flashing with a stock rom. Everything runs fine in that screen. I soft resetted the phone and it went to the windows mobile 6.1 screen with an orange LED and just sat there, I wanted to wait but impatience got the best of me and I soft resetted and now it gets stuck on the telus screen again. Sometimes the green LED flashes as if the phone was running normally and the screen dims. I don't know whats going on.
I think I've tried that ppcgeeks thing but I can't be sure. It doesn't work because I can't connect my hpone with the USB cable.
My boot loader screen has changed after flashing the stock rom. It now reads:
Code:
VOGU100
SPL-2.01.0000
CPLD-3
same problem after flashing, just different writing on the boot loader screen.
patience
patience is the key.
patience is the key.
If you go to bootload screen connect cable and it changes to USB you should be connected.
Also here is a link to a tutorial
http://forum.xda-developers.com/showthread.php?p=3680838#post3680838
To be sure that your computer is not connecting to the phone plug usb in go to deivce manager and double check the USB if it is not connected correctly it will have a warning sign by that port. Try reinstalling updating your drivers for the usb.
patience is the key.
patience is the key.
beanage said:
My boot loader screen has changed after flashing the stock rom. It now reads:
Code:
VOGU100
SPL-2.01.0000
CPLD-3
same problem after flashing, just different writing on the boot loader screen.
Click to expand...
Click to collapse
You need to flash the SPL 2.31 bootloader
It appears as if it's fixed for the most part. Some minor problems but that doesn't stop the fucntionality of the phone. But I'm still pretty pissed that no matter what i do, my phone will not be recognized by the computer with the USB cable. i've tried everything and looked everywhere. Does someone want to send me the usb drivers for the Vogue? Please don't tell me that i don't need drivers because activesync won't connect. I've seriously looked all ove rthe internet for fixes and none of them work. Any pointers ro anyone want to send me official HTC drivers? I want to start using cooked ROMS.
here you go HTC windows driver will work for the vogoue
http://www.4shared.com/file/94429326/ffb09a5f/WindowsHTCdrivers.html
But unfortunately won't solve active sync problem. I would uninstall activesync and reinstall on your windows XP computer.
Quote from HTC website
Q.
Activesync is not recognizing my device, what should I do?
Be sure that you have not connected your device to your PC before you installed Activesync. If you did plug in your device before installing, uninstall Activesync and start the process over ensuring that you do not plug your device in until after Activesync has been installed.
Verify that your device is recognized by your PC in the Device Manager; if it is not, resolve that issue first.
Unplug your device from the PC for a few seconds and then plug it back in.
Perform a Soft reset on the device while it is plugged into the PC.
On the device, go to Start>Settings>Connections>USB to PC and check the "Enable advanced network functionality.
crap, my phone just ****ed off again. Same deal as before. Hate being broke.
help with vogue frozen loading screen
i unlocked my vogue and flashed NFSFAN 6.5 ROM and now phone freezes at loading screen and will go no further. i can still pull up bootloader thats all. any help or tips would be appreciated. thank you
what is your bootloader version
htc boot up screen and bootloader
m03
b01
acaaam-4070
r 2.26.00
s 3nfs
vogu100
spl-0.41.coke
cpld-3
are you using a GPS ROM if so you have the wrong bootloader and need the 2.31 from this post http://forum.ppcgeeks.com/showthread.php?t=20370.. Install the 2.31 and give it a try.
tried using 2.31 unlocker, when i run the RUU and says it will take 10 min it accually takes 10 sec and installs fast then after my phone restarts bootloader still says .41
You need that SPL 2.31 for that ROM
http://forum.xda-developers.com/showthread.php?p=3680838#post3680838
This is a quote from the facts thread for your ROM
First go here http://forum.ppcgeeks.com/showthread.php?t=20370 and
READ the hell outta it until you have it step by step.
(BTW use the 2.31 unlocker regardless about the GPS thing)
OK, now that you've read that (happy dance time)
Download the 2.31 Unlocker and NFSFANs WinMO 6.5 ROM.
Here is a good link for the boot loader. unlocker.
ftp://up.ppcgeeks.com/Vogue/Users/ImCoKeMaN/Vogue_unlocker_MFG_2.31.exe
yeah still can't get 2.31 to load on my phone. i tried to flash the stock alltell and sprint roms but at 29% it freezes or has recovery issues and will not go past 29%. flashed dcd 0.2.0 and got it to load! bootloader still shows .41 but now when i boot up phone it says in red at bottom of HCT boot screen.
m 03
b01
No radio
d1.17
Who is the original carrier You will need to get that OEM ROM and flash it. Then run the 2.31 unlocker follow the directions you can use the bootloader on the factory rom I have done it with sprint and alltel Vogues. The OEM ROM will reinstall your radio then you canuse the unlocker. The .41 unlocker is for non GPS radio and ROM combinations.
ok since i got this phone i have had problems,but i updated it to 6.1 and it got better (locking up all the time)then i played with a bunch of custom roms,then the other day it just decided not to turn on at all,before it would just lock up at the htc screen,now when i turn it on the green light is on and nothing happnes?? i force it in the loader screen and have tryed getting it to take a rom that way and it just gets stuck and says loading but dosnt do anything? the update utilitly does not work either it keeps saying image is currupt?
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Hope it helped and good luck,
What version bootloader do you have? What image are you trying to load in bootloader.
i have opilo_240. i cant load any image nothing will take,no roms no radio no nothing
Are you sure you are naming it correctly and on a 2GB or less FAT32 sd card.
i have tryed it a million times, yes i have been typing it right.it recognizes it and starts to load it but then locks up. is there a way i can get this loader off the phone and take it back to original? maybe the loader is crap so if i try and put a original loader back in it will take a install again but i cant find any thing
Not possible that I know of to change bootloader without softspl which needs WM to run.
Where are you getting these images? What is your provider. Please update this in your profile so we can help easier.
my provider is metro pcs but its a sprint phone,i have tryed the sprint/htc 6.1 update then i tryed a couple of ryan mogul 6.5 roms.see since i got this phone (used) it had problems loading from the htc screen,sometimes i would have to soft reset about 5 times before it would load the o/s then sometimes it would go days without a problem,it did this with the stock image then got better with the 6.1 and thought it was good then i played with a couple roms and they all loaded ok but the phone was getting worse when locking up it would do it all the time,then i went back to the 6.1 sprint rom and it didnt get better just worse,then it wouldnt get past the htc screen,so i tryed again to put back to stock and now when i turned the phone on it vibrates then just the green light turns on,when i try and hard reset it just instantly says complete,i can boat to loader and connect to pc fine but when i try and load a image from cpu it goes to 1% then stops and says image file is corrupt, is my phone junk? i have a brand new touch pro coming today but i would like to get this mogul up and running its just a shame cause i loved this phone when it worked,im ready to throw it in the garbage
Get the .nbh from the following sprint .exe and try it on the sd card. If you can get into bootloader your phone shouldnt be a brick. Mtty might be an option but that isnt something I can teach you how to do very well.
ftp://ppcgeeks.com/Titan/CarrierRom..._RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
HI,
I just had this problem and I saw that a ton of others had it too. It was where my phone would stop at the windows screen and not boot, and my PC wouldn't read the phone so I couldn't load a new rom or Hard SPL. How I fixed it was by getting my phone into bootloader mode, (the multi colored screen). Here's how to do it.
While phone is Off:
Hold Volume down & press power button
While phone is On
Hold Volume down & press Reset Button (meaning the little yellow button by the battery that you have to press with a pen to soft reset it)
Once your on the bootloader screen, plug your phone into your PC, you will hear the ding that the computer recognized it but your Windows Mobile desktop software will still say your not connected, don't worry about that,, you are connected. After that, just pick whatever rom you want, then just install it like normal. and it works. If your not running a rom, do the same but install hard SPL instead of a ROM.
I hope this helps,
As long as your phone turns on at least to the opening screen there is hope.
kn0t.
i had that problem, my phone was stuck on stock together splash screen, but I just called up tmo and they have sent me a new hd2.
Three words. I LOVE YOU! well not really since I'm not gay ha!
By the way This also works for the HTC Imagio!
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
waigstar said:
can someone help me ! i have the same problem. im not sure i can even open the bootloader menu . when i reset it ,it still goes 3 colours. when i try puting a new rom on it it comes up error 262. tried task29 but still error 262. tried reinstalling activesinc , still error 262,something is telling me to sign into my comp as admin but ... can anyone help?
Click to expand...
Click to collapse
Ok first off what ROM do you have and what SPL does it show when you are in the muticolor bootloader screen? Secound if you are trying to flash a ROM yse right clicking the .exe file and selecting run as adminastrator is a good idea. l
I had the same problem.. what usually helps for me is when it gets stuck.. pull out the battery and give it a solid 15-20 minutes.. and then turn it on and do nothing up until after it has booted
i do the battery thing but i cant go on doing this , i put a little txt or phone call and the phone goes bonkers and heats up,nightmare!
ok on the tri colour screen it says
PBB110 HX-BC
SPL-S.08.0000 8G XE
MICRO(LED) 0X05
MICROP(TOUCH)
SERIAL
AH!! just got into the boatloader screen !! by pressing volume up and down together~! rest it! but i need to wait cos ive pulled the battery again!!!
I am having the same issue. I had a android rom then was finally able to flash via sd the stock rom, but it would just freeze on splash screen when trying to boot. Now when I try to flash rom again it will start and freeze on 1%. Any suggestions?
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
stormohio said:
Now when I try to load rom via usb it starts and then freezes on 1%. Then will say communication error and then when trying to boot phone it says software issue and now I cant even get a rom put back on! Please help lol
Click to expand...
Click to collapse
Ok try going to windowsmobile.com/getstarted and download and install the latest version of ActiveSync or Windows Mobile Device Center (WMDC) , wich ever one you have to have for your computer, and install it on your computer as they have updated USB drivers for your HD2.
have you tried loading a rom from the root of your memory card LEOimg.nbh?
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
melodicstealer said:
i have this problem too...but what is worse is after i went to splash screen and connect my phone to pc, my pc wont detect my hd2...so i cant flash a new rom...
ps : im on stock rom bought this almost 2 years ago if im not mistaken
Click to expand...
Click to collapse
You need to put your phone into bootloader then your computer will recognize it. Hold the volume down button down while you power on the phone and the multicolor bootloader will come up. Next connect your HD2 to your computer via your USB cable. Wait for the Serial in the white bar of bootloader changes to USB and then flash. If you go to the device manager of your computer while you see USB on your phone it should say HTC USB Sync if you want to be assured that you have a connection to flash with.
Hi all, started to try and get phone onto android last night.
Followed the guide for HSPL3 then started started to update radio but got error about USB!
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
The device boots ok and i get windows (eventualy! if i wait) Once booted into windows USB works but in the bootloader i cant get USB!
I have pressed volume down and red button and in white box it stays on serial!
I have googled for hours any pointers?
GazWales said:
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
Click to expand...
Click to collapse
grey screen, writing in blue? sounds like it thinks you have a rom on your sd card. try it without the sd card in.
Thanks for you suggestion - tired that already should have said.
The issue is fixed however - I took out SIM aswell as SD, manualy booted to loader. Waited 5 min then it changed to USB! Quickly opened HSPL3 an re flashed.
Issue was still the same! So followed same procedure and used HSPL 1.6 that fixed it! I can then flash with a rom suitable for Android!
Flashed 4 min later, put Android on - now loving my new phone - its amazing the difference! This is how the HTC HD2 should have been!
heh, lucky you, i've tried android on 6 different occasions now, first four times i wasted some hours and never got it to boot, 5th and 6th time it worked, but when i restarted, the phone wouldn't restart without a hard reset, so i'm not touching it again for at least another three months.
Thanks. Your solution worked great. As soon as I pulled the SIM and waited a few minutes it popped right up. You should mark this thread title as solved
@samsamuel try using nand its alot easier to install and there are some great builds on this website!
Sent from my Gingerbreaded HTC HD2 using XDA App
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
klumpbatsch said:
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
Click to expand...
Click to collapse
Mate, check my suggestion at your other post (you started a new thread today!)
my hd2 shut down twice by it self today but after second shut down the phone is not booting completely it stays on after the two boot screens, it stays on the orange windows page and not finish boot. ( 2.13 stock rom)
i did like 10 hard resets and nothing
maybe or my only solution is to flash another ROM, im thinking the 3.14 upgrade cuz i was on 2.13.
i did upgrade from 2.10 to 2.13 but my phone was on and sync with my pc (this was like 7 months ago)
i just want to know if i can upgrade to 3.14 with the phone in the three color screen boot screen or i have to do the whole hspl thing and flash a custom rom??
Flashing from bootloader is how ANY ROM flashes. Put your device in bootloader, connect via USB, and flash away!
ashasaur said:
Flashing from bootloader is how ANY ROM flashes. Put your device in bootloader, connect via USB, and flash away!
Click to expand...
Click to collapse
Big THANKS
i did flash my phone before but it was up and running but because it was an upgrade form the tmobile site the phone went to bootloader by it self and not by me so i was confused if i do it directly been on bootloader it will work but now i know
thanks again
ok, so i flashed the stock upgrade 3.14 ROM from TMOUS site but problem didn't go away, it crashed, it shutdown by it self and not turning on, not even vibrate or went to boot page it just didn't do anything , so i waited almost a day to turn it back on and the phone did turn on but i tried it in bootloader and flashed a custom ROM (BlueTopia 1.0.2 by cmylxgo) and it was working like a charm with android
BUT silly me i took the storage card out without turning the phone off and android running so when i realize i did it i put it back but phone was off and now it don't want to turn on. I'll wait like 15 min to try turn it back on and see what happens...
could it be a software thing?? i'm starting to think is hardware problem because it happened with 3 different ROMs?
does anyone had this problem before??