Hey guys,
I have came to the conclusion that i need to make a thread, because i have search all over this forum for an answer.
Here is my problem, I currently have not been able to activesync my wing to my computer. Now i have done all the basic steps to try to correct this. Uninstall/Reinstall activesync 4.5 on my computer, didn't work. Checked all my settings for activesync on my wing and on my netbook, nothing irregular. Here is what im seeing. On my wing with i selevt sync in the activesync program a grey bar flashes at bottom but it flickers and disappears. it looks like the loading bar but not for sure.
My specs:
Rom version: 4.17 ASERG Lite4.e WWE
Radio: 03.08.90
Any help would be appreciated, because i cannot reflash my wing to another rom. If there is any other way to flash please inform me as well.
Again in advance thanks for everyone's help!
Jason
You may want to look into flashing one of ivanmmj's roms, I believe they flash from the micro sd card.
Related
I can't figure out why AdaptROM cannot connect to my XDA. I am running Active Sync 3.7 on Windows XP pro. I have Norton Anti-Virus and several other applications that are always running. I have tried disabling all of them and it didn't make any difference. I am running the new T-Mo WME2003 and the new 6.4 radio stack on my SX-56. It syncs just fine with the PC and has a pairing relaitionship set up.
Neither AdaptRom or any of the .exe upgrade programs, nor Mobipassword can connect to my XDA. Anyone have any ideas why this might be? I have tired using a serial cable and the USB cradle and changing the connection settings. When I originally upgraded it way back when to the ATTWS SX-56 PPCE2002 rom it worked just fine. I hadn't tried it since.
The only thing I can think of is a registry setting being hosed up. I am going to try uninstalling active sync and reinstalling and see if that makes a difference.
Suggestions will be greatly appreciated.
I tried removing and reinstalling Ative Sync and it didn't have any effect. Both programs show an Active Sync error cannot connect to device.
It's as if something must have the port tied up.
Same Here
I upgraded to the 4.00.10 rom on my xda but I can't get either adaptrom or Programme A to run so that I can downgrade the device or reflash it.
Any help would be appreciated as I don't have access to an sd card writer.
Re: Same Here
qtzar said:
I upgraded to the 4.00.10 rom on my xda but I can't get either adaptrom or Programme A to run so that I can downgrade the device or reflash it.
Any help would be appreciated as I don't have access to an sd card writer.
Click to expand...
Click to collapse
I had the same problem U had before. the best solution is to buy a SDcard reader to do the job.
Read more from here http://xda-developers.com/forum/viewtopic.php?t=1717.
Good luck :wink:
I noticed that the 3.x CE developer environment also cannot connect
to a 2003 device.
XDA developer Itsme said:
I noticed that the 3.x CE developer environment also cannot connect
to a 2003 device.
Click to expand...
Click to collapse
Could this mean that some supporting files are missing from the T-Mobile rom? If somebody could get a list of all the files that are different between the 4.00.05 and the 4.00.10 roms then it might point to something...
You can try another hard reset of your xda. That happened to me about a month ago and a hard reset fixed it. Unfortunately I had to create a new relationship etc.. - Jim
Hi All,
I have a Tmobile PPC Phone Edition (Wallaby) it was upgraded to WM2003 and was working fine and suddenly stop responding after Activesync and I had to hard reset it to make it work again.
I tried to install the XDA developers edition without luck since the program couldnt detect the USB connection. I then backed up in my SD card the oroginal OS ROM (Wm2003) and reinstalled it but after I did so I lost my Phone capabilities (does not give phone settings or the signal bar appears on the screen) and what is worst I can not do Activesync since it appears connected but is not.
Can anyone please help me? Maybe guiding me on how can I put a good ROM on my SD card and install from there? Porbably the XDA Devleoper Edition?
Thanks to all and merry Xmas and a Great 2005.
May be you can try to search on this website rather than setting up a new topic. I have seen and gone through your situation before.
I have spent the last few hours searching various keywords trying to solve this issue on my own... But, I cannot.
As a result, I'd like to thank you for taking the time to help me solve the following issue:
I recently Flashed my TMobile MDA (aka the Wizard) by following these instructions exactly:
http://forum.xda-developers.com/showthread.php?t=298613
including:
http://forum.xda-developers.com/showthread.php?t=285435
After having completed those steps, I installed the following ROM:
http://forum.xda-developers.com/showthread.php?t=391927
-----The Professional Edition
In order to solve a bug issue, I also flashed the Radio from 2.25.xx to 2.19.11 ((suggested by TNT)).
At this point, I have the letter "E" in a box next to the Radio Signal Strength Bars. To the best of my knowledge this used to be a "G."
Here is the following Device Information for my phone:
ROM version: 11.0.3.0 WWE
ROM Date: 2/02/2008
Radio Version: 02.19.11
Protocol Version: 4.1.13.09
IPL: 2.26
SPL: 2.26
I can receive/make calls and SMS text message. However, I cannot access the internet or receive MMS messages as I did prior to toying w/ the phone. It is no longer connecting to/via/with/? GPRS
Any and all assistance in this matter would GREATLY be appreciated!
Many Thanks!
Install HTC Network Wizard cab then chose your netwoek it will work and setup uour connection . restart have fun. here is the link
http://forum.xda-developers.com/showpost.php?p=1832753&postcount=3
I moved it over, and ran the cab file.... nothing happened...
I can't even find a program listed in in Add/Remove Programs... any suggestions?
try one of these cabs..
http://forum.xda-developers.com/showthread.php?t=395203
ElijahMrE said:
I moved it over, and ran the cab file.... nothing happened...
I can't even find a program listed in in Add/Remove Programs... any suggestions?
Click to expand...
Click to collapse
For what its worth..
Soft reset, and its in the settings->connections screen
hi
people do u think i can use this cab file to install on my daxian x999+ i have orange company from Spain and i have the same problem
Did you connect to 'internet2.voicestream.com' ? This is needed to connect GPRS TMobile.
Just purchsed the Orange M3100 phone but I cant sync it on my pc. Ive downloaded Windows Mobile Device Center driver for Vista 64bit. It doesnt pick up my phone. Please help, ive googled etc.
Running WM 5.
In settings>connections>usb to pc, uncheck "advanced network functionality". That might work...
Cheers...
also make sure its pluged directly into your pc (one of the ports on the back) not though a usb hub, thats the prob i had syncing my 3100
thanks ultramag69. it seemed to work
now can i use FREE HTC HERMES UNLOCKER v3a by pof using vista?
the instructions talk about active sync and windows xp but no vista
sorry but ive only used this phone for few hours
you can use the sd card method as described in its readme.txt that comes with it
thats the problem I dont have a sdcard yet. Just thought the XP instructions may work using Vista and WMDC.
I believe you need to update to the latest version of WMDC through my reading but you may want to confirm that. If you do a search through the wiki using terms like "vista activesync hermes" you should get a hit as it has been extensively talked about. Also please make sure you check what radio rom you have as unlocking the hermes will downgrade the radio rom to 1.16.00.10. MAKE SURE YOU KNOW WHAT RADIO YOU HAVE SO YOU AN PUT IT BACK...
If you want to use the sd card method (I find it safer than from the pc) then you need an sd card 2 Gb or smaller as though the OS can read a higher card the bootloader (the software in the hermes used to flash) can't. Don't forget to Hard SPL your hermes after you unlock it, I didn't need to do this but you can check by putting a sim from another carrier into your hermes. However, Hard SPL is a MUST. You can get instructions from here - http://forum.xda-developers.com/showthread.php?t=296722
Sd card method on page 116, post 1160. It has all the apps needed to flash both through pc and sd card.
Then you're good to go for flashing a new os.Look into each os on your own, read the post and make up your own mind, DON'T ASK WHICH IS THE BEST..... There is no "best" for everyone, you need to choose on your own. As for the Radio Rom, I would suggest ONLY using the sd card method as if you flash this it the thing that is MOST likely to brick your device if something goes wrong. DON'T INTERRUPT THE FLASH FOR ANYTHING!!!!!
As stated the unlocking will change your radio rom.
Read carefully each step of the guides and don't skip anything and you'll be fine...
Welcome and happy flashing,
Cheers...
hi ultramag69. flashed the phone today and it worked fine. the only problem i have now is when trying to update to wm6 i just get the 4 colours screen and lose sync. same when trying to hard spl 2.1. any ideas?
Hey folks,
I can't get my unit so show up in my PC....i have installed activesync. The unit charges but thats about it.
Can anyone help me out here?..I would really appreciate any ideas...
thanks
it would be help for others to help you if you state what rom you have loaded original or cooked. If you have installed hardspl and then downloaded a cooked rom from here or somewhere else then you might have advanced networking selected in the rom to switch it off and allow active sync to recognise it simply click start > settings > connections > usb to pc and untick it.
If its an original rom then you will have to state what it is that you have installed also state what software you have loaded on to it ,as some software to play silly buggers with active sync
Hello!
i've got the same Problem as the Threadstarter...
Ive loaded the following ROM:
http://forum.xda-developers.com/showthread.php?t=458456
http://www.4shared.com/file/90040149/a7472809/GoldenGlobe_Black_GER_V10.html
(german version ;D)
now, i flashed successfully, (i believe without hardspl, as i wanted to flash hardspl it caused an error while flashing, so i tried without it.. (chosen Secure SPL in the flash-tool) )
After flash, the phone rebooted, and it didn't connect anymore -.-
the advanced networking also is switched off...
maybe i have to flash another one with the sd-card method...
xover§, talk about russian roulette...
Go to page 116, post 1160 of the Hard SPL thread in upgrading section. Instructions on how to install Hard SPL using the sd card method.
If you try to flash the Hermes without Hard SPL using the sd card method, be prepared for failure.....
Cheers...
As for active sync, have you upgraded your PC's .net framework to 3.5?
got vista.. no need for .net framework anymore xD, it's included... (and yes, the newest version..)
holy F**k...
this post (page 116, post 1160) is exact what i need xD thanks ...
[edit]
okay more people got the problem with the flash:
you can see it here:
http://forum.xda-developers.com/showthread.php?t=458456&page=121
hope there is a fix soon
[/edit]