Hi,
I hope this problem was not discussed here?
When I use the new S2U2 Version 1.52 together with G-Alarm 1.5.1 than the alarm does not work.
When I change back to S2U2 Version 1.50d than it is working.
Following things are happend:
The display goes on, but S2U2 gives not really the screen free. You could the a part from S2U2 and a part of Windows (Calendar and Contacts)
What I could say now is, that when the display is going on than it is hanging between S2U2 and Normal display.
After a while it is go to the sleep mode - than is comeing back and gives the alarm
But when you load the Touch HD and the S2U2 settings are without sleep settings then it will gives no alarm.
That was happend on monday - And the good thing was that I had a second clock because I had to go to the airport very early in the morning :-(
I don´t know was is going wrong here?
Thank you for some information
Edit/Delete Message
Hogi68 said:
Hi,
I hope this problem was not discussed here?
When I use the new S2U2 Version 1.52 together with G-Alarm 1.5.1 than the alarm does not work.
When I change back to S2U2 Version 1.50d than it is working.
Following things are happend:
The display goes on, but S2U2 gives not really the screen free. You could the a part from S2U2 and a part of Windows (Calendar and Contacts)
What I could say now is, that when the display is going on than it is hanging between S2U2 and Normal display.
After a while it is go to the sleep mode - than is comeing back and gives the alarm
But when you load the Touch HD and the S2U2 settings are without sleep settings then it will gives no alarm.
That was happend on monday - And the good thing was that I had a second clock because I had to go to the airport very early in the morning :-(
I don´t know was is going wrong here?
Thank you for some information
Edit/Delete Message
Click to expand...
Click to collapse
You should post this in the S2U2 thread, and mention also what device you have, the more information you give the easier somebody can help you. I have S2U2 v. 1.52c installed and gAlarm v. 1.47 and works fine for me, when the alarm goes off it is on top of S2U2 and i can snooze or switch it off normally.
Related
klaxon does not work with s2u2 until i unlook the phone. If i unlook it seems as if klaxon would have started at the right time. without s2u2 it works fine...
second problem: if i activate klaxon time is shown in s2u2. so far its ok. but if i chance the time it does not change in s2u2
could someone help?
solusion
klaxon will work when you change in s2u settings "Do not suspend system" to ON, i had the same problem, don't know how to fix alarm on s2u screen
Hi, thanks for your input.
What option should I look for if I want to use Klaxon and S2U2 ? Klaxon does not work well when used with S2U2... Impossibe to rely on it in the morning...
The option you quote "do not suspend system", I can't locate it in parameters... Where exactly is it ?
Any clue?
THX in advance !
hello, I found this other way, and good for me:
in settings of S2U2 :
Power ->Lock when Screen is Blank : ON
->Lock when backlight turn off: OFF
->Power Off in: 5s
->but Blank screen only: ON
good issue for me and wake up to me (curently)
Hi all
I'm trying out Klaxon alarm clock.
Can anyone tell me the purpose / function of the "bell" button (bottom 2nd from right in attached image).
When I'm setting up an alarm, clicking on it just toggles making it lit up/not. If I press the play button it always plays an alarm tone (beep) whether the bell button is pressed or not. Very confusing and as usual with all these little apps there is no manuals or instructions anywhere.
Thanks for any help
Bell icon in klaxon
When bell icon is 'lit' it means the alarm is active. When bell icon is 'unlit' it means alarm is inactive.
Thanks for the reply qai5er
Stil confused. If I go in an edit /create a new alarm, why would I want to make th ealarm inactive???? Isn't that a bit of an oxymoron ?
Also, when I click on the "play" button it plays an alarm beeping regardless of whether the alarm is active or inactive. Surely if I make the alarm inactive, then the play button should play nothing and perhaps tell me "nothing to play, alarm inactive"...??
also as well as the questions above, can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help
gt112 said:
Thanks for the reply qai5er
Stil confused. If I go in an edit /create a new alarm, why would I want to make th ealarm inactive???? Isn't that a bit of an oxymoron ?
Click to expand...
Click to collapse
No, it is'nt. This is an important feature to me at least. Just because I have set up the alarm does not mean that there is'nt situation when I do not need it. Let me give you an example. I may have an alarm to remind me to pick up my children after school. During school holidays, I would make it inactive, and I would reactivate it when the school starts. I could delete it during school holiday and recreate it I suppose but that's too troublesome.
You might find good use of this in the future.
Since Klaxon seems to work witout any problems on your devices I was wondering if you could tell me which settings you chose.
I have installed Klaxon and checked all boxes in the settings-menu, but the alarm won't work.
Instead of the Klaxon alarm the standard WM-alarm start at the specified time, but ends after a few seconds by itself (probably because Klaxon wants to start its alarm?).
Could you give me any advice?
TIA
Bacardi Man
and I repeat my previous questions incase they get lost in the conv
can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help
Bacardi Man said:
Since Klaxon seems to work witout any problems on your devices I was wondering if you could tell me which settings you chose.
I have installed Klaxon and checked all boxes in the settings-menu, but the alarm won't work.
Instead of the Klaxon alarm the standard WM-alarm start at the specified time, but ends after a few seconds by itself (probably because Klaxon wants to start its alarm?).
Could you give me any advice?
TIA
Bacardi Man
Click to expand...
Click to collapse
I kinda have the same problem..the klaxon alarm works, the music starts but ends after a few seconds only vibration goes on and on.. =S
does anyone have the same problem?
Try to disable the light sensor.
hehe yeah I already found out myself, stupid me
but thx for the fast reply!
What does the options "Integrate with TouchFlo3D" and "Forcibly remove windows Alarm" do?
I see no difference in touch flo nor in the normal windows alarms. Even if I touch clock in touch flo windows alarm is opened.
Surfer_D said:
What does the options "Integrate with TouchFlo3D" and "Forcibly remove windows Alarm" do?
I see no difference in touch flo nor in the normal windows alarms. Even if I touch clock in touch flo windows alarm is opened.
Click to expand...
Click to collapse
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
robned said:
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
Click to expand...
Click to collapse
I have tried this but I cannot seem to find Klaxon.exe whether it is installed on my device or on my Storage card, I am not sure what to do.
Nevermind, got it working after LOTS of messing around
at least 2 people have now said that they managed to sort it out, but didn't explain how they did it.
to the people who are now able to use klaxon as a normal alarm, can you please share what settigns you had to change to get the alarm to play (say, a mp3), and then snooze for x minutes ?
thanks
I ended up uninstalling it as it was too unreliable. It was a bit slow to start up and also the alarm always went off late when integrated with TouchFlo (not sure if S2U2 was causing this). Back on the standard alarm now and it actually goes off at the right time now, which is a bonus.
gt112 said:
and I repeat my previous questions incase they get lost in the conv
can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help
Click to expand...
Click to collapse
I guess that the Expire is the how long the alarm wanto keep snoozing.
Let say yr snooze time is 5 mins. And yr expire time is 30 mins. Means it will only snooze for 6 times.. then it expired..
sbirsen said:
at least 2 people have now said that they managed to sort it out, but didn't explain how they did it.
to the people who are now able to use klaxon as a normal alarm, can you please share what settigns you had to change to get the alarm to play (say, a mp3), and then snooze for x minutes ?
thanks
Click to expand...
Click to collapse
U can chooose the ringtone (MP3) from the 'sound logo' which is left to the 'Play' logo. From there u go search for yr MP3 file from yr folders. But remember to lit up the 'bell' logo or else it wont sound. Also pls close the light sensor which i found it is troublesome which yr alarm wont sound after 1st snooze.
robned said:
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
Click to expand...
Click to collapse
does this work with htc hd 2 and htc sense?
because it says only touchflo 3d and not htc sense?
thanks for the answer
cheers
I have seen this bug since the initial days of the X1. Recently after upgrade to the R2 version the problem still exist.
I just have the following things installed in the phone:
Xperia tweaks
David Andrs Batti
Facebook panel
A_S S2U2
A_C S2V
HTC TOuchflo 3D HD Beta 2
Pubba TouchFLO 3D Panel
HTC Enlarge Start Menu
HTC HTC Volume
I always use the TF3D as my defaul panel. I simply love the interface.
The issue is when the phone comes in nothing happens when i press the ANSWER button. I can reject the call but cant answer it. I need to restart the phone and things are fine again.
I think the culprit is
S2U2 or TF3D.
P.S. In s2us i dont use the slide to answer fuction.
Someone else has similar issue.
Its really irritating.
I would blame TF3D because it's the only thing you seem to have on your phone which is known to cause problems.
S2U2 works fine here, but maybe you have something done wrong in the S2U2-settings.
Try setting everything off except:
- Lock when device wakes up
- Power Save mode
- Safe mode
- Display Mode: DirectDraw
Also be sure you have the latest version installed www.ac-s2.com
moleculez said:
I think the culprit is
S2U2 or TF3D.
Click to expand...
Click to collapse
Have you tried a hard reset and then not installed either (and possibly nothing else) for a few days to see if indeed it is a software issue and not a hardware fault?
it happens to me too
by any chance, do you have your phone in a pouch and then when you take it out, it switches to landscape mode from portrait and then you can press anything? thats what happens to me...
Actually I've experienced the same issue and I've posted in the Official S2U2 thread.
My thoughts is that S2U2 is the culprit, because I don't even have TF3D installed (nor ever did). I have been wrestling with trying to fix it for the past 3 hours, and I've come up with nothing!
I have seen this before and I think it is the way that the official WM caller ID tab works. It seems to always want to 'fight' another program for focus. S2U2 has a difficult time with the first call (also the first time the WM caller ID tab makes it's first appearance), but after a restart/reload of iLock2.exe, everything is fine for me.
This really sucks because I've had to resort to the default caller ID tab so that I don't miss anymore calls!
If you think thats a issue let me try setting up S2U2 to SLIDE TO ANWER option and see if it works for me.
there is a problem with WM6.5 roms lock slider:
if a call comes in & the lock is active but the phone is in suspend (power off or manually pressed the power button) the call will show "unknown caller"
you will not see the name until you answer od then you can see it later as missed call
this is annoying as you can not screen the calls & answer/ignore the ones you like
the slider lock will show the name only if the sceen has not turned off yet (did not enter suspend mode yet)
is there any fix out there?
I am thinking if someone knows how to make the screen light dim firest the turn off only (without power off / suspend) then it will work
anyone has a registry tweak to just turn screen off & leave the ppc running without suspend?
or any other fix????
i like to use the wm6.5 lock, i know i can use S2U2 but i prefer this one & hope we can fix it
thanks
Same issue !
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
HTC phone canvas is first to present ID caller then in communication WM6.5 lock is activate by Suspend mode in communication... because Chobit Smartlock is in use... other i have the same issue like You...
unknown caller with WM6.5 lock when it s suspend mode...
i agree, if anybody knows how to solve this problem... i buy it !
lesscro said:
Same problem here...
i use Chobit Company SmartLock and HTC phone Canvas...
Click to expand...
Click to collapse
hmm i couldn't get the smartlock to work for me on my xperia
i used CsDevCtrl and it's sorta working... it auto locks my device if the backlight turns off or if i manually put it in suspend mode *power off button* and locks on wake up.... has a bunch of features i'd never use so it's a bit more complex than i'd like. but even with that auto lock i still get the unknown caller... i'll have to read more about htc phone canvas.. i'm not really liking the xperia dialer anyway... never have...
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
again tho.. these problems might just because it's not the offical build yet... these problems may be worked out with an offical release... nothing i can't live with at the momemnt
so i still have no luck with this unknown caller ID issue
i am sure someone knows the registry tweak..as many programs just use screen off
for example media player as you can play music while screen is off
or S2U2 can lock / turn off screen but leave phone working unsuspended
please help
Thanks
I've noticed this also but if you use a dialer that has its own slide to unlock then it tends to work fine..at least for me anyway..
It does take about 2 seconds for it to go from unknown caller to who it actually is though..
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Hmmm, after showing Unknown for the Caller ID this morning, now the caller ID is showing up on wake. Strange. Only thing I have done was install the sdkcerts cab. I'll test further.
no caller id in tmobile wing after installing s2u2 1.62
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
killerskincanoe said:
p.s. while we are on this topic of wm 6.5 screen lock... anyone else notice that alarms sometimes don't display the minutes if the phone is locked ? the slider works and everything for snooze and dismiss... but... it just shows the hour of the alarm.. and then dots like "10:...." even though the alarm is for 10:25...? plz post if you are also havin this problem...
Click to expand...
Click to collapse
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
ekksman said:
not sure if device dependant, when a call comes in and no id showing I simply press the power button twice (off then back on) and i.d then shows
Click to expand...
Click to collapse
Thankssssssssssssss
that trick worked with my phone
the fix was simple & there the whole time and i did not know...
its good...not perfect (should work by itself) but at least now i know who is calling
again thanks for your input
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
thanks, but i checked my registry
& i do not have callidMatch at all there???
aa125690 said:
It seems that the latest builds of WM6.5(builds 21221 & 21222) have solved this issue...
Click to expand...
Click to collapse
i have eten rom build 21501 & on other phone 21510 and both have same problem
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
I tested this out, no help. But the power button trick works...hmmm. I wonder what's going on and why this works?
21501 and same problem on
htc titan.
AWESOME! thx you!
ahmedfikry said:
Hi
i did not notice that i guess because i did not the alarm with lock screen before
but thanks for pointing it out
i fixed the problem
all what you need is to unzip the attached file..use the 2 files inside to replace the ones in "\windows" folder
i used resco explorer to replace because they are protected windows files
then soft-reset...everything works better after that & shows full clock & am/pm too
enjoy
Click to expand...
Click to collapse
DUUUUUDE... haha thx!
u got right on that.. i'll download and give it a try.
although i haven't yet had the chance to check since my latest ROM update if it was just the rom or 6.5... but i'll test and reply with results THX AGAIN!
p.s. i wonder if above mentioned power button trick will work with my alarm situation on the lock screen.. willl also investigate!
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
killerskincanoe said:
SOOO>>> has anyone else tried using a custom .mp3 or .wav msg tone.. a non-short one.. i'm using one about 11 sec long.. and when the device is locked, screen on or off... and a msg comes in.. the tone cuts in and out... as soon as the device is unlocked
it stops cutting in and out... doesn't do it if the device isn't locked....
anyone else experiencing this?
Click to expand...
Click to collapse
Yes. I notice that the cuts happen when the video plays (the small arrows to the left and right of the slider) Once that times out, the music is contiuous.
noellenchris said:
Has anyone tried changing calleridmatch?
Use a registry editor and go to HKCU\Control Panel\Phone\CalIidMatch value is by default 8, i.e 8 Digits. Change that to 7 and soft reset.
I will test and see if it helps, it used to help w/wm6.1.....
Click to expand...
Click to collapse
Thanks!! this worked for me. Using "Udk WM6.5 BETA2 21500 - base v2.04" (device= Touch Diamond)
For some reason I can't get G-Alarm to work with S2U2. I'm using the latest versions of both.
What happens is that the phone wakes up, but then S2U2 stays on screen and the alarm is not triggered.
Maybe somebody knows a set of settings that will allow G-Alarm to work with S2U2.
Thanks.
Its working with mine but seems to be triggering the windows alarm aswell, wierd.
In s2u2 settings/ advanced/exceptinal exes list add Galarm.exe and Galarm popup.exe
I've finally managed to do it. Here are the settings in case somebody else needs them:
I put all 3 G-Alarm exe in the Exceptional list
The S2U2 settings are in the attachements
Maybe not all the settings are needed, however these worked for me. Feel free to experiment and to let us know if you discover something interesting.
BTW, I'm using S2U2 v. 2.20.
LondonTownGuy said:
Its working with mine but seems to be triggering the windows alarm aswell, wierd.
In s2u2 settings/ advanced/exceptinal exes list add Galarm.exe and Galarm popup.exe
Click to expand...
Click to collapse
You only need to put GAlamScreen.exe in the S2U2 exception list.