klaxon does not work with s2u2 until i unlook the phone. If i unlook it seems as if klaxon would have started at the right time. without s2u2 it works fine...
second problem: if i activate klaxon time is shown in s2u2. so far its ok. but if i chance the time it does not change in s2u2
could someone help?
solusion
klaxon will work when you change in s2u settings "Do not suspend system" to ON, i had the same problem, don't know how to fix alarm on s2u screen
Hi, thanks for your input.
What option should I look for if I want to use Klaxon and S2U2 ? Klaxon does not work well when used with S2U2... Impossibe to rely on it in the morning...
The option you quote "do not suspend system", I can't locate it in parameters... Where exactly is it ?
Any clue?
THX in advance !
hello, I found this other way, and good for me:
in settings of S2U2 :
Power ->Lock when Screen is Blank : ON
->Lock when backlight turn off: OFF
->Power Off in: 5s
->but Blank screen only: ON
good issue for me and wake up to me (curently)
Related
It's found there are several issues when running S2U2 on Diamond. An intermidiate fix is that:
1. Disable DirectDraw will prevent the occasional blank screen;
2. Enable NoBackLightCheck (it's only valid in v1.05 or later; create a DWORD value with name NoBackLightCheck and value 1 under \HKEY_CURRENT_USER\Software\A_C\S2U2; restart iLock2) will make IdleStart works again.
Known issues:
1. CallerID does not work.
2. Home key cannot be locked.
3. "S2U2 Settings" has error when it's scrolling about half the way.
UPDATE on 29 July:
A new version of S2U2 v1.10 is released at http://forum.xda-developers.com/showthread.php?t=412418.
For optimal usage with Diamond, make sure you grab the VGA version & turn on "Don't double check Backlight" at the S2U2 Settings.
thnx A_C for the info, already try to solve it but hope you can come out a diamond version soon....by the way s2v zoom function also not able to use on diamond any solution??
Had the same problem with zooming, did not found the bugs with s2u2 yet but if you say soo... Is there a version for Daimond of s2u2 en s2v coming??
Greetz and thanx for your wonderfull applications!
thank you for yr concern. the only thing that real bother me is my diamond always answering my calls due to the pressure from the belt case. i realy hate that. i miss s2u2 soooooo much. please do something. no need of gifs or fancy clocks. only a slide to unlock and caller id that works with the diamond. please!...
"ExceptionEXE4"="cprog.exe"
"SafeMode"=dword:00700000
for callerID, if you use advanceconfig to disable the phone skin, then it works! But your diamond-style dialpad will disappear.
I just installed S2U2 on my diamond.
When my device is locked, i can access my device when i press the home key. so basically, it is not ''locked''.
any idea how to disable all hardware buttons during locked up?
ranchu said:
I just installed S2U2 on my diamond.
When my device is locked, i can access my device when i press the home key. so basically, it is not ''locked''.
any idea how to disable all hardware buttons during locked up?
Click to expand...
Click to collapse
Did you read the first post?!
I guess A_C is working on the problem (hope so )
thx for A_C again
And for the weather?
A_C are you planing on releasing a version which fixes the issue ?
Da9L said:
A_C are you planing on releasing a version which fixes the issue ?
Click to expand...
Click to collapse
Sure, but as said in the first post, it takes times...
S2U2 v1.10 released
@ALL
A new version of S2U2 is released at http://forum.xda-developers.com/showthread.php?t=412418.
For optimal usage with Diamond, make sure you grab the VGA version & turn on "Don't double check Backlight" at the S2U2 Settings.
could i have the battery in blue color? or a method to create myself if is it possible
i've put the vga battery bigger than normal
very compliments A_C for the program,it is very usefull
tnx
A_C said:
@ALL
A new version of S2U2 is released at http://forum.xda-developers.com/showthread.php?t=412418.
For optimal usage with Diamond, make sure you grab the VGA version & turn on "Don't double check Backlight" at the S2U2 Settings.
Click to expand...
Click to collapse
totally sweet
Thanks A_C - looks like this works nicely with having a password lock, etc
i been playing around with it for the last hour, had 3 calls and a few sms, all working perfectly, now whos for coffee
Only HTC Weather isnt working
Imaginati0n said:
Only HTC Weather isnt working
Click to expand...
Click to collapse
Same issue for me... I use the TF3D weather...
I don't know why my Diamond touch screen was disable when I lock it with the new version 1.10b? Cannot slide to unlock? I've uninstall my older version, delete all the file/ reg. and install the new version. Can anyone told me what to do? Thank you so much and I love this software very much!!!
Hi,
I hope this problem was not discussed here?
When I use the new S2U2 Version 1.52 together with G-Alarm 1.5.1 than the alarm does not work.
When I change back to S2U2 Version 1.50d than it is working.
Following things are happend:
The display goes on, but S2U2 gives not really the screen free. You could the a part from S2U2 and a part of Windows (Calendar and Contacts)
What I could say now is, that when the display is going on than it is hanging between S2U2 and Normal display.
After a while it is go to the sleep mode - than is comeing back and gives the alarm
But when you load the Touch HD and the S2U2 settings are without sleep settings then it will gives no alarm.
That was happend on monday - And the good thing was that I had a second clock because I had to go to the airport very early in the morning :-(
I don´t know was is going wrong here?
Thank you for some information
Edit/Delete Message
Hogi68 said:
Hi,
I hope this problem was not discussed here?
When I use the new S2U2 Version 1.52 together with G-Alarm 1.5.1 than the alarm does not work.
When I change back to S2U2 Version 1.50d than it is working.
Following things are happend:
The display goes on, but S2U2 gives not really the screen free. You could the a part from S2U2 and a part of Windows (Calendar and Contacts)
What I could say now is, that when the display is going on than it is hanging between S2U2 and Normal display.
After a while it is go to the sleep mode - than is comeing back and gives the alarm
But when you load the Touch HD and the S2U2 settings are without sleep settings then it will gives no alarm.
That was happend on monday - And the good thing was that I had a second clock because I had to go to the airport very early in the morning :-(
I don´t know was is going wrong here?
Thank you for some information
Edit/Delete Message
Click to expand...
Click to collapse
You should post this in the S2U2 thread, and mention also what device you have, the more information you give the easier somebody can help you. I have S2U2 v. 1.52c installed and gAlarm v. 1.47 and works fine for me, when the alarm goes off it is on top of S2U2 and i can snooze or switch it off normally.
Try it just get this from others forum and it's free....
Auto Lock v6.06 (CSDEVCTRL)
The locking can be activated at the following events:
1. After a specified period of idle time (no screen tapping or touching the keyboard).
2. After the device has waken up.
3. During a call ("In-Call Locking" Partial or Full).
4. Gesture Left or Right to unlock
WM6.5 SmartLock
1 WM 6.5 use new lockscreen . gray when in wm6.1 or older
2 lockscreen when startup
3 lockscreen when standy
it works well after reboot.
Auto Lock v6.06 (CSDEVCTRL) looks very nice... many options in setup as
executing application after unlock (with command line parameters), locking keyboard, unlocking while slide-out (for raphael i guess), setting right sip, flashing, vibra, etc. ... rly Nice...
but for me LockMeLite is better... (with build in - slide 2 answer option while ringing) cheers
thanks for upload... !
lucasjohny You're the best! Thx. for find this apps.
Hi,
please can you tell me what im ment to do with this?
do i need to install the cabs from the 2 links or just the autolock cab?
Thanks in advance
MG
I'd follow the links to the main thread as both of these apps are on XDA and both have been updated significantly since the OP started the thread.
There are also much more in depth descriptions.
The attached cab files are also outdated. Don't use either of them if you want the latest/greatest.
very nice app!!! I have wanted this for a long time
http://thewingster.com/smartlock.aspx
Thank you very much
I'm wondering whether I can disable the tiny and short sound when I receive a call during the device is locked and turned to silent or vibrate mode? I don't want to disable all sounds of this app, but just this because when the device is turned to silent, it shouldn't make any sounds, should it?
The lock sound is off when I turn the device to silent mode.
harky said:
http://thewingster.com/smartlock.aspx
Click to expand...
Click to collapse
super! thks bro
i'm using the 2.01 theme vga for s2u2 for my tilt 2.
i have a question about the little headset icon that appears at the very top of the lock screen...is there a way to make that disappear? i do not have BT enabled nor a headset plugged in..not sure why it's there...
another questions, i use htc home weather, but the weather picture does not appear...any idea how to fix this?
thanks
I've noticed that headset icon too. It's probably a side-effect of the widcomm BT stack instead of the MS one. Might need to talk with A_C to get that resolved.
As far as the weather, make sure you have it set to Manila 3D (type 7 IIRC).
agentdr8 said:
I've noticed that headset icon too. It's probably a side-effect of the widcomm BT stack instead of the MS one. Might need to talk with A_C to get that resolved.
As far as the weather, make sure you have it set to Manila 3D (type 7 IIRC).
Click to expand...
Click to collapse
i set it to manila 3d, but only display today's high and low temps...what is type 7 IIRC?
do you by chance know how to get rid of the pin security? apparently i now have to slide to unlock (s2u2) and then enter pin..i thought s2u2 would overwrite it..
IIRC = If I Remember Correctly
And it is option 7 in the settings (Manila 3d Weather). You're just missing the icons for the weather but you can see the high/low numbers? That might be the theme if you're using one. Or maybe you're missing the gfx files under \Program Files\S2U2\gfx\weather
Pin security should be under Start, Settings, Lock (or at least it is on NRG ROM; Fusion might be different).
great, thanks! i was also wondering, if there's a way to have s2u2 lock when i listen to music with a bluetooth headset? apparently i have to tap the powerbutton to get s2u2.
do u have any tips on whats the best way to converse battery with s2u2 (setting wise)? thanks!!
You could always assign a hard button to launch S2U2. Or there's also the S2P integration. If you change the settings of S2U2 to lock when the backlight goes off instead of when coming out of standby it would auto-lock when the screen dims. Or there's the time-based locking as well (lock after x seconds).
I haven't had a problem with S2U2 draining the battery on the Tilt2. v2.04 seems rock solid. Just keep the default power/advanced settings and you should be fine.
agentdr8 said:
You could always assign a hard button to launch S2U2. Or there's also the S2P integration. If you change the settings of S2U2 to lock when the backlight goes off instead of when coming out of standby it would auto-lock when the screen dims. Or there's the time-based locking as well (lock after x seconds).
I haven't had a problem with S2U2 draining the battery on the Tilt2. v2.04 seems rock solid. Just keep the default power/advanced settings and you should be fine.
Click to expand...
Click to collapse
What exactly is S2P? Thanks for all the details information. I greately appreciate it.
Slide-2-Play. Another useful utility that A_C developed. Check out his site: http://www.ac-s2.com
agentdr8 said:
Slide-2-Play. Another useful utility that A_C developed. Check out his site: http://www.ac-s2.com
Click to expand...
Click to collapse
thanks, definitely very helpful!
For some reason I can't get G-Alarm to work with S2U2. I'm using the latest versions of both.
What happens is that the phone wakes up, but then S2U2 stays on screen and the alarm is not triggered.
Maybe somebody knows a set of settings that will allow G-Alarm to work with S2U2.
Thanks.
Its working with mine but seems to be triggering the windows alarm aswell, wierd.
In s2u2 settings/ advanced/exceptinal exes list add Galarm.exe and Galarm popup.exe
I've finally managed to do it. Here are the settings in case somebody else needs them:
I put all 3 G-Alarm exe in the Exceptional list
The S2U2 settings are in the attachements
Maybe not all the settings are needed, however these worked for me. Feel free to experiment and to let us know if you discover something interesting.
BTW, I'm using S2U2 v. 2.20.
LondonTownGuy said:
Its working with mine but seems to be triggering the windows alarm aswell, wierd.
In s2u2 settings/ advanced/exceptinal exes list add Galarm.exe and Galarm popup.exe
Click to expand...
Click to collapse
You only need to put GAlamScreen.exe in the S2U2 exception list.