Database Users

how to limit connection to only wifi

last year my daughter's fiance wanted a wizard so i gave her one to give to him.
she broke up before she gave it to the guy.
now my daughter has a new almost fiance and this guy got the wizard.
he is complaining that sometimes the wizard connects to cingular data and not to wifi.
of course he doesn't want to pay the cingular data charges so how do i disable that and limit his connectibility to wifi.
do i just make sure the data connection is turned off in connection manager or is there a better way.
thanks

irv6744 said:
he is complaining that sometimes the wizard connects to cingular data and not to wifi.
of course he doesn't want to pay the cingular data charges so how do i disable that and limit his connectibility to wifi.
do i just make sure the data connection is turned off in connection manager or is there a better way.
Click to expand...
Click to collapse
Look for a cab called Modaco NoData. It allows you to turn off data access to whichever methods you don't want. I can post the cab later today. Its also found built into my xda mobile 6 rom.

thanks for the response.
i tried to download it from modaco but got an error message even though i was logged in.
finally found it on a european site and grabbed it.
thanks again.

i tried to install the cab on my g4 8125 with wm6.
NoData does not run properly.
i get a NullReferenceException
with a couple of more lines that start with System.Windows.Forms.Form etc.
any ideas how to fix this program in wm6 or turn off the edge a different way.
thanks

an old solution to this use to be to go to settings --> connections --> connections --> advanced. then from there click on select rules and change it so that both settings are set as "My Work Network". setting it to my network only connected via wifi or when wired...since i think the my isp setting might have the wireless service information.
not a 100% guarantee, since i don't use the internet either, but i've always set it this way and haven't had any connections to the internet. even when i open up ie, it doesn't try to connect to anything.

Is there a way to force WiFi only?

I have free unlimited data for a few months, but when it is over I would like my phone to never connect to the internet through the carrier unless I specifically tell it to (Prefer to use the WiFi feature). Is there a setting, registry hack or other way that I can do this. I appologize if this is not a mogul specific question, I just figured it would be hardware specific.

yeah, there are a few free programs i've found on on xda that allow you to disable the gprs, etc... then all you have to do flick on your wifi switch and you're good to go.
I've attached a copy of the program that i personally use. I found it on this site but i don't have a clue what thread it was....
what i've done is after installing the program i set the "voice dail" button on my phone to activate the NoData program instead. Then i can easily toggle off the services i wish to use.... keeping them turned off also increases your battery life tremendously

Thanks for the reply. I tried that app, the connection that came up was CDMA1X so I disbled it, and then went to internet explorer it still browsed the web without a wifi connection, so I assume this didn't work.

Do you have sprint? If so, I'm not sure why you're phone would have a different setup than mine. When using that program i have two listings come up: 1. Phone as Modem, 2. Sprint PCS.
If i disable both i get only wifi.
thanks

I have Telus in Canada.

jjlwork said:
I have Telus in Canada.
Click to expand...
Click to collapse
ok i just played around with my phone a little more and have one other idea.
begin by tapping: start>settings>connections tab>connections>manage existing connections
select one of the options in the list and then tap the "proxy settings" tab.
uncheck the box "This network connects to the internet".
Repeat for each connection.
Hopefully this will solve your problem

I tried that too, unfortunately when I close the connections settings and go back in the check mark is back.

Hi, I'm not sure if you have solved this problem already but, somehow I did. I went to manage existing connections and assign a username and password . So now whenever, it tries to connect on the dial up (cdma1x), it prompts for a password, just press "cancel". I also have some programs for different home screens and contacts manager if you're interested.

YAY! YAY! YAY! YAY! YAY! This program has allowed me to kill all apps from using the data connection which lets USB Modem actually WORK on my Mogul! THANK YOU! THANK YOU! THANK YOU! THANK YOU! THANK YOU!

How to set wifi as default rather than GPRS?

Anyway?
if better , perm disable of GPRS will be good .

Try NoData to disble GPRS. Personally I'm not having much luck with it as my TD2 keep closing it down in background.
Alternative is to deliberately set an incorrect APN so it cannot connect even when it tries.
I don't know of any method of setting a default connection type.

NoData.cab works fine in my device, but HD Tweak can do the same job, so I removed it.

Would like to do the same too, and then have my weather and emails be updated via my home network thru wireless only...
any one able to do this?

Of course you can! Using 3g or any other paying data connection when WiFi is available is simply foolish

sualc said:
Of course you can! Using 3g or any other paying data connection when WiFi is available is simply foolish
Click to expand...
Click to collapse
Done spose you would like to tell me how please...i am not that clued in with the HTC device just yet...and have used alot of my data already...which i have to pay for...
Thanks..

With pleasure:
Some people say they can deactivate gprs,3g etc within windows..but as I emptied my sim credit within a minute when I first started my Topaz, I decided not to worry anymore by installing Modaco's NoData.cab (it's free,google for it) and disabling all costly data connections from my operator. After a few days I realized that nodata.cab was no longer needed because I had also HD Tweak, who can do the same.If you use it go to point 6. and disable the 3 last settings. So it's up to you:NoData.cab or Hd Tweak...and I'm sure even others utilities work aswell.

Or you simply delete the settings for 3g conections and the software will decide to use WIFI it's avaible instead 3G (because it will not work without settings.)

How do you do that? In this case you would have to do the network autoconfig again if you need 3g etc..anyway this discussion is funny because it is rare to find a thread with multiple solutions recently....I was getting bored of unsolved problems . Cheers !

sualc said:
With pleasure:
Some people say they can deactivate gprs,3g etc within windows..but as I emptied my sim credit within a minute when I first started my Topaz, I decided not to worry anymore by installing Modaco's NoData.cab (it's free,google for it) and disabling all costly data connections from my operator. After a few days I realized that nodata.cab was no longer needed because I had also HD Tweak, who can do the same.If you use it go to point 6. and disable the 3 last settings. So it's up to you:NoData.cab or Hd Tweak...and I'm sure even others utilities work aswell.
Click to expand...
Click to collapse
If you activate wifi the wm will use this
instead 3g. right know i post from td2
and i use wifi and the gsm it is still active bu not in use

Ok, and what steps did you take to achieve this?

sualc said:
Ok, and what steps did you take to achieve this?
Click to expand...
Click to collapse
i try it right know to be sure.
I have SPB monitor instaleted to verify the traffic.
If 3G it's active and you enable WIFI the application it will use 3G.
If the 3G it's close and open WIFI the application it will use WIFI and don't open 3G.

pauln said:
Or you simply delete the settings for 3g conections
Click to expand...
Click to collapse
So it's not about "deleting" anything, you're just using another application (costs USD$19.95). May be a solution

You understand me wrong.
First solution about deleting the connection was the simplest one if you want to use only WIFI.
Second : "I have SPB monitor instaleted to verify the traffic."
I use this app ONLY to verify and to be sure were the app goes to made traffic not for directing the app.
SPB Monitor tell you if you have one or more connections how much traffic you made...
and I see what I tell you if I have 3G closed and WIFI activated the traffic was made on WIFI and 3G remain closed.
But if you have 3G connected and start after that WIFI the 3G will made the traffic.

OK I understand, may I ask you again what are the steps for your first solution?

1. if you don't want to warry about 3G connection and you don't want to use it.
-"Connection setup/menu" disable auto configuration
-"Connections/manage existing connections" and delete all the connections
- enable WIFI and all the programs will use WIFI(will be the single way)
2. If you want to use 3G and WIFI
-when you use WIFI be sure/verify the 3G connection it's closed(click on the status bar-signal strenght icon and if it's active disable it)
-afterthat enable WIFI
Otherwise if 3G it's active will be the first option for applications to acces the internet.
Try to enable Autodisconect (ADV CONFIG or HDtweak) of data connection after you use it to disconnect automatically for you.
I hope I help you.

Solution 1 doesn't work here,wasted a couple of euros ..back to my good ooold system.

i still can't disable it, i just bomb $400 for activating gprs ..
new to WM phone , so ... kinda slow .

If you only want to use wireless all the time, try the following:
Go to Start | Settings | Connections
Click on Connections icon
Click on Advanced tab
Click on Select Networks button
Programs that automatically connect to Internet should use
My Work Network
Programs that automatically connect to a private network should use
My Work Network
Cheers to SEX1 on whirlpool...

XClemX said:
If you only want to use wireless all the time, try the following:
Go to Start | Settings | Connections
Click on Connections icon
Click on Advanced tab
Click on Select Networks button
Programs that automatically connect to Internet should use
My Work Network
Programs that automatically connect to a private network should use
My Work Network
Cheers to SEX1 on whirlpool...
Click to expand...
Click to collapse
Hi, will this solution also fix my issue? My issue being:
-No dataplan, but do not want do disable/delete 3g/gsm, because I still want to use it sporadically on the road, and recieve MMS. But only when I choose to manually.
-At the same time, I want the automatic updates of weather, push-email, stock and such, but ONLY when I'm in a known WLAN.
In simple terms, I want to deny the 3g/E/H from automatically connecting, without deleting them. At the same time, wifi should be allowed to automatically connect, and update selected services.
Is this possible?

Data connection full time

Hey guys.
One of these days I got an SMS from my carrier saying my data plan had been activated (I didn't ask for it) and that my cell would be self configured to use the data connection.
The problem is that since then, my phone seems to be connected full time.
The back plate is hot as hell, the battery doesn't last 6 hours, and every cheap pc speaker set (that suffers interference from cell phone waves) indicates it's connected the whole time.
The first time it happenned, I managed to turn it off with "HD Tweak".
Now I flashed Dutty's "R7 Thriller" and the problem is back, though now I use HD Tweak to disable the connection, set "always on" to false, set "auto disconnect" to 10 seconds and nothing seems to fix this. The only way to make my battery last for more then half a day is to put it in airplane mode.
I even tryied to set the 'priority' order of connections to "My Work Network", and I even deleted the data connection (There's "Vivo Zap", the Edge/3G one, and "Vivo MMS" - this MMS hasn't been deleted by me).
Anybody had any problem like this? How to fix this?!
Thanks in advance!

try this app http://rapidshare.com/files/88130685/MoDaCo_NoData.CAB.html
it disables data connection completely -- install then go to settings, connections and start no data and disable your decided connection!

Thanks a lot, I'll give it a try! ; )
Just outta curiosity: is this normal, this full time connection? I disabled it every way I found, and yet it didn't stop!
F*** Windows Mobile... ¬¬

shinobih2o said:
Thanks a lot, I'll give it a try! ; )
Just outta curiosity: is this normal, this full time connection? I disabled it every way I found, and yet it didn't stop!
F*** Windows Mobile... ¬¬
Click to expand...
Click to collapse
Of course it aint normal, but I maybe wrong, cuz i have a completely different operator and completely different data connection(which is turned off for me by the operator)--- full time connection maybe active because something is wrong with your rom or something - try a hard reset if the nodata app doesnt help

NoData didn't run in my ROM (Onkolog's WM6.5 Full). : (
But I installed "Advanced Config Tool" and disabled "GPRS Auto Attach".
Description: "Automatically search GPRS/3G connection on start of radio, or only when a data connection must be estabilished".
It seems cooler now; as soon as I get to my work I'll test it with the desktop speakers (they make some pretty weird noises when there is a cell phone radio frequency emitter near them, like a cell phone trying to connect to the 3G or GSM network).
I'll post it back when I get back!

I disabled my data connection like this
Settings>Connections>Connections>Advanced>Select Networks...
And in those two drop down menus select "My Work Network"
Worked for me....

I tried that too, but that didn't work.
Indeed, the only way to make the battery last more then 6 hours is to use "Advanced Config" and disable that 3G lookup thing.
Weird, uh? Anybody had a similar problem...?

Why does my HD2 keep connecting to the internet? (on its own)

Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.

shaliru said:
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
Click to expand...
Click to collapse
Did you disable the rest of the services ( HTC location service, stocks, Internet time sync, Facebook, Twitter, YouTube as well ? In my case the Stock were causing unwanted connections before I figured out..

jarbi said:
Stock were causing unwanted connections before I figured out..
Click to expand...
Click to collapse
I think stock was the culprit. I removed it from the home tab from day one and as a result couldnt access it's settings. I put it back on and sure enough it was connecting every 30 mins.
Thanks alot mate. I'll report back in a day or two with the results, though I'm pretty certain it was the stock application.

If you want to be able to turn internet off so it cant connect when you dont want it to then just install the attached cab, run the program then you can enable or disable both settings as appropriate.

I also recommend to use NoData.

Just go to settings->wireless control->connection->advance->select network(choose my work connection if you havent rename it yet) If you would like to use hsdpa/edge/gprs again you will have to change it to as it was before.

mskip said:
If you want to be able to turn internet off so it cant connect when you dont want it to then just install the attached cab, run the program then you can enable or disable both settings as appropriate.
Click to expand...
Click to collapse
Got a brand new HD2 and each time I install NoData, I get an error. What should I do to fix this please?

What's the error message you are getting?
WB

str0g said:
Just go to settings->wireless control->connection->advance->select network(choose my work connection if you havent rename it yet) If you would like to use hsdpa/edge/gprs again you will have to change it to as it was before.
Click to expand...
Click to collapse
the best solution without any installation .

HD2 connection problem
Hi i have encountered the same problem my phone keeps logging into its internet for no reason , i have to disconnect it regularly . now that i have downloaded the nodata.cap how do i use it ? i have installed it onto my phone . how does this file work

feliciang said:
Hi i have encountered the same problem my phone keeps logging into its internet for no reason , i have to disconnect it regularly . now that i have downloaded the nodata.cap how do i use it ? i have installed it onto my phone . how does this file work
Click to expand...
Click to collapse
Just run nodata and then follow the on screen instructions its easy to use.
Mark.

mskip said:
Just run nodata and then follow the on screen instructions its easy to use.
Mark.
Click to expand...
Click to collapse
Even better, you can use Dial-up Enabler/Disabler: works like nodata but interface is a little better and is more user friendly ;-)

thegios said:
Even better, you can use Dial-up Enabler/Disabler: works like nodata but interface is a little better and is more user friendly ;-)
Click to expand...
Click to collapse
Pls note that with nodata, you disable the internet connection but, if the connection is active while disabling it, you still need to end it manually after exiting nodata.
This sounds weird I know...
With dial-up enabler/dsabler it is a lot easier as you will see two connections: one is the internet connection configured on your phone and the other is the current active connection, and you can disable them at the same time.
In addition it does not have annoying confirmation messages on disabling and exiting

shaliru said:
Every now and then, I notice that my phone connects to the internet (t-mobile internet). I find this strange because I've disabled everything (i can think of) from automatically updating or connecting (weather, email and msMyPhone). I have an unlimited data plan so I'm not particularly worried about the cost; however, it drains my battery fast. Just yesterday, I tapped the top of the screen to see my notifications and I noticed that t-mobile internet had been connected for over 2 hours. I just can’t figure out the cause. I've even done the auto disconnect registry tweak (auto disconnect after 60 seconds) but still no joy. If anyone can help or even suggest a process monitoring application, I’d be very grateful. Thanks in advance.
Click to expand...
Click to collapse
how do u do auto disconnection tweak

HD2 connection problem
Connect your HD2 to your computer and transfer the cad file to your mobile.
Find the file on your phone using File Explorer (on the phone).
Double click on it and follow the instructions.
Then go to Start and locate the nodata programme.
Start it and disable what you want.
I disabled the Orange (in my case) internet connection and WAP.
In my case it is crucial that I donet't g automatic access to internet services when I roam because I am on a PAYG tariff.
£20 last me up to three months normally with a different phone (SIC) and since I started using my HD2 my last top up lasted me less than a week.
It's a rip-off!
Once beaten, twice shy...
I won't be caught again!
Hope this helps
Djam2011