hello,i'm able to buy myself an artemis for cheap price but it got a fault,it is in bootloader mode and i am asking if there is a way to flash rom and spl and ipl from this,please reply me.
Yes you can. If you flash the original shipped ROM from your PDA.
Related
Hi!
I was reading this forum and WIKI. REAALLY GRAET JOB!!!
I'm from Poland and I'm a new user of HTC TYTN
I've got some questions.
Does flashing my device with HARD-SPL v7 voids my warranty??
later on I would like to flash it with the newest shipped rom. do i have to use hard spl v7 to back to an original rom??
Mys spl is 1,06. Rom is 1.18 and radio i 1.03.
Thanks for all suggestions!
Hi guys,
I tried to upgrade my Dopod C800 with Official WM6 ROM for HTC P4350(HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe)
But i get ** invalid vendor Id error*** and stops upgrading.
My dopod C800 details is
SPL 1.09.0001
IPL 1.09.0001
ROM 1.7.707.3 WWE
ROM Date 11/01/06
Radio 2.69.90
protocol 4.1.13.30
Ext rom 1.7.707.106
OS 1.7.0.0
Pls help me to upgrade my dopod C800.
Thanks
Jose.
This is because the Dopod acutally never released a WM6 for your device. I too own a Dopod C800.
See this thread. This will upgrade your device to WM6 and will also make it hard SPL. After that you can(if you wish), upgrade to the cooked ROMs around too
And hey! do follow the instructions carefully
kdskamal said:
This is because the Dopod acutally never released a WM6 for your device. I too own a Dopod C800.
See this thread. This will upgrade your device to WM6 and will also make it hard SPL. After that you can(if you wish), upgrade to the cooked ROMs around too
And hey! do follow the instructions carefully
Click to expand...
Click to collapse
You had a working phone after flashing HardSPL on a phone with:
SPL 1.09.0001
IPL 1.09.0001
???
Hi Thanks for the reply.
Pls help me which method i should follow.
Method 1)
1) Use HERALD-USPL-beta3.zip or Hard-SPL-Herald.zip --which one i have to sellect?
and then flash with
2)
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_ Ship.exe
or
Method 2)
1) Use HardSpl_WM6.rar or herald_wm6.rar
2) do i need to flash with officila HTC ROM or the above will contain WM6?
thanks
Jose
ivanmmj said:
You had a working phone after flashing HardSPL on a phone with:
SPL 1.09.0001
IPL 1.09.0001
???
Click to expand...
Click to collapse
Yes, it acutally got upgraded to..
ipl 4.17.0001
spl 4.70.Yang
you're verry verry lucky
almost everybody bricks his device wirh spl 1.xxxxxx
bdevogt said:
you're verry verry lucky
almost everybody bricks his device wirh spl 1.xxxxxx
Click to expand...
Click to collapse
GF luck?
Upgrade to w6.0 for dopod c800
Hi Mjose,
were you ever able to upgrade to 6.0??
I have a Dopod c800 with the same specs as yours. If you were successful in getting 6.0 onto it, will you please share the process and required files with me??
pls explain how do u upgrade your 1.xxxxxx phone to YANG spl
I too have the same specs for my device....c800
I want to upgrade it to win 6....please help
i want to know the procedure to upgrade my device
I have problem with my device and if somebody can help me will be great,i need original wwe rom.10x in advance....
wwe or other official rom are not released now! All attends Olipro's hardspl for flashing any roms... GO OLI GO!!!
hmm,this is very bad....i`ll ask one friend from brightpoint....
Hi everybody, Martin from Argentina here.
I have a Polaris and I had flashed with the oli hard spl and test some roms last months.
The issue is that the wifi turn on doesnt work anymore and may be it due a phone drop-to-floor event...
I think I can ask the seller about the guarantee, but I think I will need to reflash to original SPL and rom. A friend of mine have an original untouched polaris so I think I canget the original spl and rom from there.
The problem is I dint find how to do it. Can you give some advise or link?
Best, Martin
Look here:
http://forum.xda-developers.com/showthread.php?t=381600
and search for:
Flash back to original SPL
Regards
Thanks! I really appreciate your post!
Best Martin
running Polaris 3LIT3 Full rom!
First of All I want to thank everybody in this forum I've learned a LOT from you guys..
I have a question though.. does flashing a SHIPPED ROM (not a DUMPED ROM) after CID-unlocking the device with HardSPL causes the device to brick??
In other words.. does a shipped ROM contain SPL?? cause I read that HardSPL cannot be overwritten so that may brick the device..
Sorry if that question has been answered before.. I tried the WIKI but I couldn't get a definite answer..
Thanks in advance..
Fa7my said:
First of All I want to thank everybody in this forum I've learned a LOT from you guys..
I have a question though.. does flashing a SHIPPED ROM (not a DUMPED ROM) after CID-unlocking the device with HardSPL causes the device to brick??
In other words.. does a shipped ROM contain SPL?? cause I read that HardSPL cannot be overwritten so that may brick the device..
Sorry if that question has been answered before.. I tried the WIKI but I couldn't get a definite answer..
Thanks in advance..
Click to expand...
Click to collapse
All shipped ROMs contain an SPL.
If you have a Hard SPL it will not allow flashing of ROMs with built-in SPLs. That's the point of it being called a HARD SPL.
If you have the USPL instead of Hard SPL it will allow flashing of ROMs with built-in SPLs (but not safe).
If you don't have any USPL/Hard SPL, but just the stock SPL and you use the white screen method instead to flash, it's even less safer AND NOT RECOMMENDED.. because, if you brick your device you won't be able to flash anything from Bootloader since you only have the original SPL.
The white screen method is only used to flash the USPL or Hard SPL. If you have a Hard SPL, the white screen method is the only way to downgrade to another SPL.
You can remove the SPL from the shipped ROM though.. (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool).
For more questions, just search or post in the correct thread.
thnx dsixda.. u r the best
can someone add the bloody response from dsixda to the roll up thread or something?? maybe it will save sometime for the n00bs (and for the rest of us too).
good day sir...
so by using this (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool) is the safest way to downgrade lets say from WM 6.5 to WM 6 ?
I'm downloading this file:
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
Device: ELF0100*0
CID: DOPOD001
Version: 2.20.707.1B
Language: USA
for my:
Touch version : Elfin
Device ID : ELF010050
CID : DOPOD001
IPL : 3.10.0002
SPL : 3.10.0000
I used NBHextract.exe to extract the files to make ROM my question is should I add the ext_ROM or just the OS coz If I want to revert back to its original state I can flash it with this "original" OS.
-by the way what OS version is this : RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
WM 6.0 or WM 6.1? thanks