guys i've installed spb pocket plus and I didn's like it and removed it, after removal the device wanted soft reset. I restarted it but its stucked on the windoes mobile screen ... what to do ??
first take out battery for 30 mins then retry.
if that doesnt work and soft reset doesnt work, then im afraid its hard reset time and you will loose all your data on your device you know how to hard reset yes? press and hold camera & comm button and keep pressed, then soft reset keeping buttons pressed until warning screen comes up asking you to hit green button.........
thanks my friend the xda is now like brand new
no problems, congrats
Related
My O2 xda mine refuse to start-up. I'm traveling this week without mobile phone, so any helps will be highly appreciated.
Problem description:
- Using the camera/video mode and acidently forgot to turn off mobile for a while.
- It was hange with screen changed to very strange color like negative film colors
- Press reset in the bottom of the phone, try to restart but then couldn't start-up succesfully. keep hang at the start-up screen only.
- Have to take-out the battery cover to turn it off, and turn-on by pressing the power button.
- Problem was even worst when it couldn't even show up the start-up screen anymore. If i press power button the blue light will blink once and then nothing happend.
P/S: not sure about the ROM version, since i couln't turn-on my phone at the moment. Cldn't find this info from O2.com website either.
Most probably you're battery is bad. Have your tried a hard reset?
How to do a hard-reset?
I've tried the reset button in the bottom. Is it the correct way?
If this is xda battery issue then could be fairly easy to check-out by a brand new battery.
kalau nak hard reset, press power button + tekan lubang reset.
try hard restart the cellphone, maybe it will solve the problem, if not, contact the local service for repair
What is address of local service in Kuala Lumpur?
What is address of local service in Kuala Lumpur?
Imbi or Low Yat Plaza?
Hard reset by press power + reset buton simunteneously?
I'm not Malaysian so I don't realy understand writing in Malay
To do a hard reset you need to press and keep pressed the camera and power switch while pushing the reset button.
Plug it into the wall charger rather than the PC USB.
Hard reset & recharging the battery solved problem
I've tried the hard reset and the re-charging the battery by using USB connetor.
It took about more than 15' minutes to re-charge and once the power is sufficient the installation process starting.
My cell phone is working properly now. All Microsoft Outlook related data was restored succesfully
Thanks a lot
Hi, I'v got O2 XDA Mini S and a "little" problem with it. I'v just installed Phone Profiles [Second Edition] 8.0 and it crashed my phone. After installation (on my memory card), I could not see it on my today screen...so I'v tried to configure it in today screen configuration - but I could not get there - the configuration we're not accessible (it crashed). So after that, soft reset. And the real problem began. After the boot screen and "windows mobile welcome screen" the mobile just freezes. Active sync on my PC connects to it just for a second, then disconnects. The Phone Profiles [Second Edition] 8.0 is installed on my memory card, so I'v removed the memory card - the same problem. It was annoying - so hard reset....does not help. I have Wisbar Advance 2 as well, which is starting first and I can see only the welcome screen of it (sometimes it loads and I can see the whole skin). Sometimes (after reboot) I can see the menu, today screen etc. but the phone freezes. I think that the Phone Profiles [Second Edition] 8.0 is freezing the phone after his process starts. Is there anything like "safe mode" start or something like that, which could help me to remove this soft ? Or any other way to normally start the phone ? Any ideas ? Many thanks for help.
It should start after hard reset - phone profiles, wisbar advance will not load after a proper hard reset - the phone will be back to factory condition.
Did you do proper hard reset? After that it sounds like phone profiles should be installed to device memory not storage card. Most today plugins only work properly on device memory.
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
leez said:
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
Click to expand...
Click to collapse
Yep sounds like hard reset is not done. Press these 2 buttons but keep them pressed and dont let go - then press reset with the tip of the stylus and then text should come on the screen with black background. Press green (call) button and hard reset will commence.
Or you can first turn device off - then press the 2 buttons and keep them held and press power on to reach the same screen.
Ok, I'v done it. Many, many thanks for help. The phone manual is wrong (!). . Anyway Phone Profiles [Second Edition] 8.0....WTF is that ? This program just crashed my phone and I need to reinstall all the soft. Wrrr. And I just wanted a profile manager . Thanks again for help ! :mrgreen:
Good, I am glad - try the one I use - its free http://www.winmobileapps.com/device/pocketpc/plt/plt_download.aspx
Nice one, got it. Thanks.
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Hold down (and keep holding) the camera button while depressing the reset button. Hopefully it boots into a tri-color screen. If so, plug it into the USB port and, at the bottom of the screen, it should display "USB". If that happens, flash it with a *known good rom*, such as a stock T-Mobile rom. Don't try to be clever, the object is to get the phone working. Once the flash has started, *get up and walk away* for 15 or 20 minutes. Don't check in on it, leave it alone, It takes some time. When you hear it's little chime, it's done, rebooted and ready. If any of the above doesn't happen or the flash outright fails, then you may have trashed it permanently. It doesn't sound like it's beyond hope yet, however.
i have the wizard and im having the same problem after installing a ROM from this website...it just goes to the windows mobile screen with the numbers then shuts off...id really like to save my phone is there anything else i can try because that hard reset thing isnt working
axxeman001 said:
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Click to expand...
Click to collapse
Well same thing happened to me a few days back.. I had to Cold Reset [which restored it to factory defaults], but hey I got it working again..
Press Communication Button [Top Left] and Record Button [Top Right] at the same time and use the stylus to soft reset..
You will get a black screen, asking you to press "Send" to reset to "Factory defaults"
Press "Send".
Hopefully you should get your MDA working again ...
I read the "Above" in the HTC Wizard Service Manual [PDF] on the *last page* under the "Cold-reset" Section..
Dear Team,
I have HTC Touch 3g.Yesterday my phone powered down since i forgot to charge the batter .Then i charged the battery for whole day and when powered the phone it comes to the smart mobility screen and it never changes from that can anyone help me to resolve what the problem is?
I tried restarting many times but nothing is happening it comes to smart mobility screen and it hands from there.
Advance Sincere thanks
Vinod
Did you try to remove the battery for a few minutes and replace it and then start up?
Hope it helps!
Hi Nirak,
I tried that also but that doesn't work. Then one of my friend asked me to hard reset the phone this is not the reset button on the back side of the phone.This hard reset will format your phone and bring your phone back to factory setting .
FYI
We have to hold volume down button and Centre enter button and then we have to press the power button without releasing the rest of the buttons.Then it will show a message and after release those two buttons and press volume up button system will initializes and will come back with factory settings
Thank you Everyone hope if anyone faces this issue try hard resetting the phone
Glad a hard reset solved your problem
you must be hard reset your mobile
Hello everyone!
i've recently got a new Elf, and after installing my MUI, the windows performed a soft reset, and after it did, the blue windows mobile "Loading" screen appears, and than it turns to the green "Windows mobile" screen (those whice appear while loading) and than it gets stucked.
i tried to performe a hard reset, and i've seen videos of howto, and i spoke with a HTC lab in my country, and they all told me the same - Hard reset.
i pushed TALK+END and than pushed in and out the Stylus, it does resets itself but the first thing i see on the screen is the blue windows mobile loading screen.
it like it skips the boot level (which can't be, since windows lauched).
so what can i do?
is there anyway to reinstall windows mobile without a need to connect the Elf to the PC using ActiveSync?
Thanks in advance!
Or.
hard reset
as u have got a new one dont try too much on that... n check this if u have done the right thing...http://farm3.static.flickr.com/2173/2193904710_88f0aa424f.jpg
release the end and call button only after u push n release the soft reset button.
STILL A PROBLEM
take it to the dealer you should be having warranty.. dont spoil it.. he he..
vinoob
it still doesn't work, and i have no warranty since no one salesw this model in Israel.
any other suggestion?
BTW, when i press Talk+End, and than reset and before release the reset Enter, it shows a blue empty screen, and than it shows the Blue loading screen.
It works!
Thanks.