Hiya, my wifes Atom has developed a problem with the output through the headset.
While listening to MP3's it's filtering out bass (well the effect is like its turning all songs into Karaoke the low voices disappear!).
Using the phone speakers the audio is fine.
Pushing the headphones in slowly, with no clicks you can hear reasonable audio in both earphones but quietly - low levels are audible.
First and second click, one ear piece audio, with distortion.
In all the way - both ear pieces give audio at full volume but without the bass and some distortion.
So, things I've tried so far. Different headset, same prob. Adapter and normal earphones, same prob. Installed different audio software (tried mort and gsp), same prob. Enabling and disabling the equaliser. Adjusting the volume, same. Soft reset, same. Restore to previous backup, same. Hard reset, same. Opened it up and checked all plugs, and cleaned the headset socket with some isopropyl, same problem.
Anything else I can try? The service centre for these things is on the other side of the country and this is her only phone/media player (it would take minimum 2 weeks an a stack of dough for a service repair).
Firstly, you could provide us with a bit more information on the handset itself? say....
Model and ROM?
Also what kind of handsets you are using?
The stock wired headset? or a third party headset?
name of the media player?
Hi, i ve have the same problem since yesterday , maybe i used some shortcut keys - had a lot of windows opened, now i canot hear people talking in a movie or mp3 - karaoke efect, if i push headpshones out just a little bit the sound is almost normal. I have this problem on my laptop and am using USB headset-- its the same problem with or without USB modul.
many thanks for help
ps: first i made system restore then i reinstalled the codecs - klightmegacodecpack , no help
Related
Hi,
I've noticed an audio output distortion of some frequencies when listening to music, in the sound coming out of the 2.5mm jack.
When the speakers on the device is used, there is no problem.
When I plug the headphone, there is sound output, I hear the music, but some frequencies are lowered so much that I can't hear the singers voice. When I unplug, the speakers work fine and I can hear the singer again.
In additon that, most of the background instruments can be heard as well as the backvocals, if they are female.
It's like the sound is being processed (like an equalizer) when I plug the headphone, some frequencies are lowered, given some echo, reverb etc.
I don't understand how this is possible. I am thinking of a hardware contact problem, but it's hard to believe if this is a hw problem.
I've tried two firmwares (2.16.x, 2.25.11.1) and made hard reset also. No result.
Any ideas?
Note: I can try to actually record the sound tonight if anyone wants to hear.
Best regards,
Fast
maybe try a different headset first?....could be a short in the cable, because what you are describing is a phasing issue with the headset speakers......
Thanks for the response Kiru,
Just tried a different headset plugging it into my HAMA 2.5 --> 3.5 adapter. same result.
I will try the original headphone came with the Wizard. If the source of the problem is the HAMA adaptor, this should resolve it. (i hope it is)
Could you please elaborate on the "phasing issue" ?
fastguy said:
Could you please elaborate on the "phasing issue" ?
Click to expand...
Click to collapse
Hmm....how can I explain.....Let's start with the speaker itself. A speaker has two terminals on it, one postive and one negative. What we want is to have the positve from the source (ie. Amplifier) to the positive terminal of the speaker, and the same for the negative. Since there is a pair of speakers, we want them to be hooked-up correctly. If hook-up correctly then the speakers are in phase with each other, and this is called constructive interference, hence in phase. When ONLY ONE of the speakers is hooked-up backwards, we call this destructive interference, hence being out of phase. Being out of phase causes frequencies to cancel or sound muffled. Hope you kind of get what I mean, but I highly doubt that this is the problem with headphones because heaphones nowadays rarely get manufactured with this problem. This is just the electrical part of phasing. Also, you can have one speaker, and it could sound out of phase because of the distance it is firing from walls or the shape of the room due to the reflections of sound, this is called acustical phasing.
A short in the cable, meaning the positve and negative wire are somewhat touching, can cause a similar effect, and I suspect that this is problem for you. As you now state that you are using an 2.5 to 3.5 adaptor, I would agree with you that most likey you have a faulty adaptor.
Hope this helps! and keep me posted!
Hi again,
Thanks again for the explanation Kiru, I know a bit of electronics so I got the problem.
However, I'm now home and tried to original headset, no result. The same problem is existing.
This makes me believe that I've broken something inside the Wizard which shortcircuits something. I'm very dissapointed.
Maybe the only way is now to buy a stereo bluetooth headset...
Thanks for your help
Any reason that you can't return to orange for repair/replacement?
PROBLEM SOLVED
I got this unit from priceminister second hand. It's origin is not France, I don't have a purchase receipt neither.
By the way, I solved the problem. I disassambled the unit using the info given in one of the posts in the forum. I played a little with the contacts, there was oxidation in the outer solders, i cleared them up etc, it 's working at the moment.
I'll post some pictures afterwards.
and I hope i will be able to reassamble it, I already have a piece of thing which I don't know where to put
I got the same problem. Was working fine for 2 months then all of a sudden the headphone plug is all messed up. Volume is all distorted I can sometimes hear a song but quality is no where near the original. Usually everything sounds echoed. I think something is wrong with the plug
I've had the same problem. The headphone jack on the Wizard is crap. If you have your Wizard in your pocket with an adapter, as you move, the adapter pries back and forth on the jack. This breaks the cheap jack.
If you want to listen to your Wizard as an music player, you should invest in a nice set of bluetooth headphones and only plug the jack in when the wizard won't be moved around a lot, like a home or car stereo.
I recommend Nextlink Spider headphones. They double as a headset and you can navigate through your library with the button on them.
MUSIC Speed
I got the same problem here. The SE stereo btooth headset isnt yet in our place.
Anyway, i experienced this one with ROM2.16 Imate. The sound speed or music speed seems to being played faster than normal. But when i tried to plug the 2.3-3.5 adopter and quickly pull it out, the sound is played in normal speed then. strange.....
are you all sure that the wizard has a stereo output ? I thought it was mono.
Anyway you can get earpieces and headphones with a 2.5mm jack so you don't need a 2.5-3.5mm adapter.
Maybe the contacts on your jack are not connecting properly with the internal contacts of your adaptor
Would the Motorola HT820 headphones work on Trinity?
They're working fine for me; the only tweak I did was to disable the JointStereo so I have proper stereo audio - there are a million threads about that around here, it's in the registry.
I have the SYN0948D model of the HT820, which I think is the newest, for previous ones there's a flash firmware update that may fix some skipping.
oh! Mind answering some questions for me?
How are they for music? Sound good? Any major problems? I use TCPMP for music.... will the controls work that are on the headphones themselves? How about the battery life (of the phone and the headphones?).
It seems the headphones also have a mic? Does that work with the phone?
Id appreciate if you could answer these for me... thanks!
The sound quality for music is certainly not what I'd call perfect.
Put it this way: I attached them using the supplied 2.5 -> 3.5 mil connector to my high-end audio card in my PC, and they sounded pretty good for headphones of their size.
However, when running over Bluetooth there is a noticeable drop in audio fidelity. I don't know whether to attribute that to the Trinity or to the headphones, but I suspect the Trinity. Maybe it's downmixing the audio?
There is a lot of A2DP tweaking you can do to find the best balance between audio quality and skipping/reception; I left it fairly close to the defaults for now, and I'll probably play with it more later.
The mic works with the phone and the audio quality for voice calling is outstanding. It sure makes a difference to hear a person in both ears - when I use them I almost never have to ask a person to repeat themselves. I haven't heard what anyone else sounds like when calling from the Ht820s, but friends say that they can hear a slight echo depending on the room I'm in. Makes sense because the room I usually call from is a smallish office/den with wood floors and lots of echoes.
I am going to fire up TCPMP right now to try to play a song with it. I've been using PocketMusic but it sucks balls...
Plays the song just fine, but it doesn't seem to support the next/prev track buttons at all. I tried to map them in the Hot Keys section, no dice.
PocketMusic and WMP both seem to work with the buttons, for what that's worth.
If you need anything else, just PM me like last time.
Yah I tried pocketmusic... it blows. I use tcpmp for everything. I suppose I can just use the controls on the phone itself.
I currently use the shure buds.... I hope Im not too used to the great quality ive been getting on them.
Hi there,
I am having some issue with my O2 Atom Exec external speaker.
When the phone rings:
- I can't hear the ring tone (phone and pda volume settings turned up to high)
When I pick up:
- microphone does not work
- phone speaker does not work
Actually microphone seems to no longer work same with external speaker. I try to play music and no sound comes out externally. When I use the combined stereo headphones and microphone, these work fine. I have tried a hard reset and looking into the Windows registry for some obscure volume settings but this did not resolve the problem.
Anyone else experiencing a similar issue? Please help,
Hi,
You have a problem with the headphone socket. what I would suggest is play a file in media player and put the headphone plug in halfway and gently move it around left to right. You will know when it's fixed because the sound will start coming out of the speakers. This is a known fault that has been around a long time.
Cheers.
rdman
Today I faced this problem, I tried to do everything.
Then I did exactly what you said, and this procedure
fixed my speakers. Thank you ,very very much for help.
We can see this thread below, talking about this problem.
http://forum.xda-developers.com/showthread.php?t=267056
Something is wrong with the audio playback using a headset with my wizard, I get a very strange sound distortion like radio interference with the audio. I have tried several headsets and reloaded the audio files. I have also tried the files and headsets with different devices and the problem is definitely in the wizard. The distortion is not very loud so I can't tell if it is present with the tiny external speaker or just over the headphone jack. Has anyone else experienced this? Any fixes? I have reloaded the device several times so it is definitely a hardware issue. Also it wasn't always this way so it is something that has developed over time.
Thanks,
Jay
Someone has the ring tone (mp3) of guitar that comes in QTEK A9100?
please, I'm lost my ring tone of guitar guitar, when I instaled a new ROM
thanks!
I have found some strange behaviour that i'm hoping someone else can test out on their Galaxy S.
I have found that some headphones seem to work fine with the phone for music playing but others result in the sound being distorted with the vocals being very faint as if the left and right channel are cancelling each other out (with vocals generally being on left and right channel).
The packaged Samsung headphones appear to work properly although the quality seems average. I tried my iPhone headphones but these resulted in the strange sound distortion described above. I also tried a pair of cheap Sennheiser which were a free give away with a purchase from Richer Sounds and they worked well. Another pair of no-name cheap headphones exhibited the same distortion problems as the iPhone headphones.
Oddly, the FM radio sounded ok with all the headphones, it's just the music player that has the problem. I have also tried a couple of other music apps including the doubletwist player to rule out the software.
I'm considering taking it back to the shop to swap for a replacement. I'd be grateful if anyone could try out some headphones (particularly iPhone ones) on their Galaxy S and report their results to see if this is just a quirk with my phone or the Galaxy S in general.
Many Thanks
I just need some clarification because I know that a headset, and not headphones, is delivered with the Iphone. If it was a headset then I might suspect that different Iphones use different polarity as opposed to Samsung. Try out the Samsung headset on the Iphone.
EDIT:
Obviously not the problem. I must have skipped over the radio experience.
I can't post a link to it, but I remembered that GSMArena did a thorough review of the SGS. If you find your way to it, go to page 6 and see the sound chart at the bottom. SGS is superior in sound to iPhone. Perhaps the iPhone headset/headphones and the cheap ones are not sufficient for the SGS? I'm guessing
I had a similar experience when I tried to use the Samsung Spica headset on my HTC Hero. It seems that it might be a difference in polarity as suggested above.
Does all the headsets that give distorted sounds have a microphone on them? (E.g. not headphones)
the iPhone's headphones have extremely high distortion regardless of the media using to play them. The SGS is probably just overpowering them because they are very loud headphones as well/easily powered.
No it's nothing to do with them being overpowered.
I have an expensive pair of etymotic in ear headphones that are exhibiting the very same problem. Strangely I found a fix. They have a microphone on them and pressing in the answer button on them seems to fix the problem. I have taped the button down now and everything works perfectly. The second that button is released though, everything goes back to being faint, muffled and distorted.
Odd!
PS. This isn't just with the music player. I noticed it first watching a video.
It sounds like Samsung has their own way of producing the 3.5mm port with regards to the microphone support.
The Samsung headset distorts music on my HTC Hero.
The HTC headset distorts music on my gfs Galaxy Spica
To be clear, are you saying the problem only affects headsets with microphones? I have etymotic er4p headphones and it would be a deal breaker if they didn't work right with this phone.
If its only showing up in the media player, check that you havent enabled the 5.1 button in the the top right of the player. This can really screw with the sound and entire frequency ranges can be lost. I'm guessing this is whats happening.
The default headphones work fine for me if a little tinny, but with my Senheissers, the results are very pleasing. Apart from a slight gap between tracks that should seemlessly play through, I prefer using it to my iPod Touch. Being able to change tracks and volume without unlocking is a nice feature.
I threw my iPod headphones out years ago, they're the most ridiculous design ever, with the cable tapping the inside sleeve all the time when you walk or run.
k2snowboards88 said:
To be clear, are you saying the problem only affects headsets with microphones? I have etymotic er4p headphones and it would be a deal breaker if they didn't work right with this phone.
Click to expand...
Click to collapse
It sounds like that the problem is with headsets with microphones, yes. Not sure if it happens with all 3rd party headsets w/ mic though.
Considering you have etymotic, and ClownShoes a few posts up have problems with this brand, I guess you're out of luck unless you wanna tape the answering button like he did.
The er4p is just headphones, so it sounds like i'm in luck.
Got my GS a few days ago and im having exactly the same problem with the Etymotic hf2 Headset with mic. So yeah it looks like it the mic that causes the problems.
sim87 said:
Got my GS a few days ago and im having exactly the same problem with the Etymotic hf2 Headset with mic. So yeah it looks like it the mic that causes the problems.
Click to expand...
Click to collapse
It's a little bit crude, but taping the button down does work.
I have the same issue with with Monster Studios even with the cable without the integrated mic. Would be great to have some sort of fix.
Headphone issues
Just thought I would post what I knew about the issue, both me and my dad purchased the same pair of headphones to use on mp3 players (the headphones are ultimate ears metro fi 220 vi's if I remember correctly, these have an in-line microphone as well as a single button for answering calls and to control music playback). Whilst I experienced no distortion when using them on my iPod Classic, my Dad's Creative player would produce the issues described above - he found that either taping the button down or slightly pulling the headphones out would solve the issue however it ended up annoying him so much that he went back to using another set of headphones.
I don't know what causes the issue but I just thought I would let people know
i have some sennsihaur sport headphones which work fine no problems. i also a monster fm transmitter in the car.. again no problesm.. just make sure the volume is not on max but 1 setting below max.
Hmmmm, a few problems here. Obviously the standard Samsung headphones are fine, no humming, no background noise. However if I connect the following:
1. Standard Apple iPhone (with mic) loads of background noise, humming etc
2. Shure (no mic) loads of background noise, humming etc
3. B&O (no mic) loads of background noise, humming etc
4. Shure (with mic adaptor) loads of background noise, humming etc greatly reduced by pressing the mute key.
Using the Shure adaptor with the others resulting in the same as 4.
Needless to say I'm not happy!
That's too bad. Not being able to use my Shure with the phone renders it useless for music and that IS important.
In the SERVICE MODE *#*#197328640#*#* there is an audio menu
there you can change the headset settings too like NR noise reducion.
i did not test and changed the settings but when i had the samsung omnia2 last year
i had some problems with my headset and fix it in in the sevice menu.
when you gonne do some tests write down the orginal settings before you try.
hope this will help some of you..... and post the results
im sure its the jack, cos the galaxy s has a 4pole trrs at left/right/mic/ground
iphone compatible headset have a 4pole trrs at left/right/ground/mic
thats why pressing the mic button clears up the sound as it closes the circuit
so it a matter of finding an adaptor that switches the mic and ground terminals
I have a tf10vi and im trying to diy one
will post the results
Just saw the post and thought I would check mine again, not that I noticed anything....anyway tried few songs and different types and all are sounding amazing, I use Sure 530 so music needs to be no lower than 256 to get the best out of the phones, most of my music tracks are 320bit.