Some registry tweak or something?
weenter said:
Some registry tweak or something?
Click to expand...
Click to collapse
You just want the ringer to RING without any other indication of an incoming call?
or
U dont want an INCOMING CALL ALLTOGETHER?
I gather it is the Former coz In the latter simply turn On <flight mode>
U can also set the device to recieve calls without Ringing by setting it to Pick up after <zero> calls.
Using a handsfree here would be an advantage.
U wont Miss any call.
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
weenter said:
I just want the ringer to RING without any other indication of an incoming call. Is it possible?
Click to expand...
Click to collapse
i'm also looking for a way to do this
Did anyone found a solution for this ?
texarcana said:
Did anyone found a solution for this ?
Click to expand...
Click to collapse
I doubt it... Seems kinda pointless, having the ability to tell you who is calling, but then deliberately turning it of..
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
texarcana said:
yes, but when someone is calling, there is always a delay.
When you hear the first ring, the caller already heard it twice.
Maybe by disabling this, it would speed up the process a bit
Click to expand...
Click to collapse
That's the network, not the device.
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
Well... The cause may be that, but I doubt showing a caller ID screen will change the times....
texarcana said:
It can't be the network, I never had this problem with my Nokia phones.
I personally think it's a flaw in the dialer application or in WinMobile itself.
Click to expand...
Click to collapse
I agree with texarcana here, the lights begin to flash on my phone when it rings a good few seconds before the screen get around to displaying the incoming call notification.
This is on WM 6.1, on my new HTC Diamond Touch.
I assume that notifications such as an incoming call or text message are either
A) A windows message sent to a background service awaiting it.
B) An application is executed with parameters describing the event
In either case, i believe it must be possible to redirect the notification in the registry. However, if the notification method is at fault (ie causing slow response, most likely to be true if B above is true.)
I'm going to investigate, I'll post an update of my results.
Im really sorry to bump this really old thread but has anyone solved this?? I would like to disable the incomming call notification too.. cuz I just added a full screen caller ID, but the damn notification pops up and covers the photos of my contacts.. so whats the point of the caller ID if i, not gonna be able to see the pictures
well i know its in Hkey_curent_User\controlpanel\notifications\phone
but im not sure how to disable it...
or even more important (for me) only disable it for a certain #...? thanks! anyonbdy
To Diamond I found. cab which options are unblocking "flash light for." in SOUND & NOTIFICATION it didn't give but nothing. I dug around in the HKLM/Drivers/Builtln/Keylight and Keypad register and I turned off LED generally speaking but I blocked buttons
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
thanks, works for my htc pure with phonex
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
this will make the bubble of incalling to disappear??? if not who can i do it
hustlehard82 said:
first you'll need a registry editor, then edit the following key:
HKCU\ControlPanel\Notifications\Phone
Duration=1
change the 1 to 0
im not sure if this is exactly the fix you were looking for. its intended for stopping he default caller id bubble from blocking fullscreen caller id apps like s2u2.
Click to expand...
Click to collapse
Didn't work for my samsung i760, what about DispllayOrder? Set it to 0 too? Or what would that do exactly? I'm curious now, it's set to 1 so if all else fails, I could change it back to 1 again... I guess. I'd just like to know first before I go blindly jumping into something.. haha
Sidenote setting it to 0 did work I just had to reset my phone so remember to reset your phone after changing this, I see the curtain try to popup, or at least the frames but nothing after that... Although sometimes it does act buggy and I'll completely miss or be able to answer a call cause my phone will constantly viberate (No pickup on ringtone at all starting) then after the call is missed the viberating will stop but my phone will still be frozen... Thats when the screen is off though..
Okay after a few tests sometimes it does work and sometimes it doesn't work at all and the curtain will still show up... Then again screen off sometimes the phone wont ring at all, I'm setting it back to 1... LoL
I just wish there was a way or a more advanced notification manager, it should be just like being able to disable incoming text messages and disabling sent message notifications..
____
I'd love a fix for this too, as I already have a picture caller id with PocketX Photo Contacts Pro...
But it's annoying as all get out!! To put it politely, I slide to answer then I've got to press the left softkey too! In order to answer a call, if I could just disable the built in windows mobile caller id curtain then it'd be a heck of a lot easier...
Please let's get a scripter on this to start working their way around and tweaking it to be able to be disabled..
Thanks!!
________
As for ring delay which is also a few other posters concern of the phone taking it's own sweet time to decide when to start ringing... This is what I used for my i760, I'm sure someone here could turn this into use for any phone make and model:
Ring Time Limit Fix:
**772 [service code]
six zeros for the code (000000)
Scroll down with the d-pad till you see end of basic nam
hit right d-pad to change "exit" to "more"
hit middle d-pad to select
hit the down d-pad 76 times till it says slot cycle index
Change this to 1 or lower EDIT: By entering the value with the number pad and then you hit the middle d-pad to exit.
This changes the frequency at which the phone talks to the tower and will
start the unit ringing MUCH faster. the lower you go the faster but the more battery it uses. I find 1 gets the phone ringing within 3 seconds but doesn't hinder battery life.
Click to expand...
Click to collapse
I've got mine set to 0 though, but then again, I don't get very many calls, plus I have my phone charging a lot. Also I always carry around a spare extended fully charged battery in my holster... Usually my battery lasts a whole day... But with it set to 0 my phone picks up and rings at the end of the first ring on the callers end.
Hi there,
i tried to exclude some applications in Gyrator 2 menus but i do'nt know how to exclude rotation, when i'm in a call ( to end the call for example, the auto rotation makes the "endcall" button changing place and it's hard to end my call or when i'm listening to messages and want to delete one , the keypad changes orientation ....)
for all others apllications like photos albums, or today screen or other ..it is fine, i set everything with success.
Another question, in the input settings, i laways have by default the Compact Qwerty for the portrait mode and this is like this since i have installed Gyrator, and when i change the settings in the input menu for the Full Qwerty, it did nothing, it is always the Compact one that appears, ( when in landscape mode, the full qwerty is ok) ....
Events in the menu
....mine (I must admit I found someone elses & used it) has an even for incoming call.
I'll dig out the file & post it
Disable (Opera),Opera_MainWndClass,1,0,0,
Disable (Manila),Manila,1,1,0,
Disable (Teeter),TEETER,1,0,0,
Disable (YouTube),HTCYOUTUBE,1,0,0,
Disable (Album),HTCAlbumClass,1,0,0,
Disable (Camera),IACSP20_Main,1,0,0,
Keypad,Phone ,1,1,1,
Incoming Call,Phone - Incoming,1,1,1,
Rotate,*,1,63,1,
...thanks , i already added an event for incoming call but it doesn't work when you are IN CALL , just worked before you take the call ..... that's my issue ....
I'm using S2P on my HD but is is buggy in combination with gyrator2 how can i disable S2P like opera etc.
thx
brainfogs said:
...thanks , i already added an event for incoming call but it doesn't work when you are IN CALL , just worked before you take the call ..... that's my issue ....
Click to expand...
Click to collapse
Try this...
Disable (Incoming_Call),Dialog,1,0,0,
Edit: made a mistake here, should be Disable (Incoming_Call),Dialog,1,0,0,,0
And what about the dialer?? Can anyone tell me what is the line to disable the dialer from preventing to rotate ??
how do i tell gyrator not to rotate when a picture is viewed?
right now it is spinning around which is very annoying.
when i tap on a picture in the pics tab the picture opens and often rotates twice so it is top at bottom
promexx said:
how do i tell gyrator not to rotate when a picture is viewed?
Click to expand...
Click to collapse
Add an event call Disable (Album), click Album in application tab and tick portrait in orientation tab. On the event list make sure the even is set to orientation (has a 1 to the right of it) and apply. Works great for me.
i tried that but it doesnt work.
gyrator doesnt seem to recognize the album application. it turns the picture one time too often for 90 degrees
i tried to choose the album application in the list which is calles "htcalbum class" and also the manual recognition. neither of that did work.
If you can, copy and paste here your event.ini from the Gryrator2 folder so I can see the settings your using.
www.ppc-welt.info/community/showpost.php?p=1163322&postcount=22
http://www.ppc-welt.info/community/showpost.php?p=1166439&postcount=140
This is usefull but I don't understand german... english tutorial,please
I will translate it for you later today
here are the settings i'm using:
Stylus In (Lock),*,0,1087,8,,0
Stylus In,*,0,1087,2,/Windows/Default.wav,0
Stylus Out,*,0,2111,2,/Windows/Default.wav,0
Disable (Opera),Opera_MainWndClass,1,1,1,,0
Disable (Manila),Manila,1,1,1,,0
Disable (Teeter),TEETER,1,1,1,,0
Disable (YouTube),HTCYOUTUBE,1,1,1,,0
Disable (Album),HTCAlbumClass,1,1,1,,0
Disable (Camera),IACSP20_Main,1,1,1,,0
Rotate,*,1,63,1,,0
Hang Up (Phone),Phone ,1,16,128,,115
Pickup Call (Phone),Phone - Incoming,1,1,128,,114
i've that the problem with htc album is that yu rotate the device, htc album rotates itself, then gyrator rotates it again, then rotates it back again to the correct position. does that make sense? effectively the screen goes like this:
0°, 90°,180°,90°
is there a way of having gyrator just completely ignore htc album?
I uninstalled gyrator and tried gsen instead. this program works fine with photo album. now i have a problem where i can't get it to load on startup. i get an error saying it can't find the g sensor.
elmarko99 said:
i've that the problem with htc album is that yu rotate the device, htc album rotates itself, then gyrator rotates it again, then rotates it back again to the correct position. does that make sense? effectively the screen goes like this:
0°, 90°,180°,90°
is there a way of having gyrator just completely ignore htc album?
Click to expand...
Click to collapse
Hi, I use Gyrator2 version 2008.11.21.0
here are my settings (htc album & incoming call working fine) :
Stylus In (Lock),*,2,1087,32,,0
Stylus In,*,2,1087,2,/Windows/Loudest.wav,0
Stylus Out,*,2,2111,2,/Windows/Loudest.wav,0
Disable (Opera),Opera_MainWndClass,1,1,1,,0
Disable (Manila),Manila,1,1,1,,0
Disable (Teeter),TEETER,1,1,1,,0
Disable (YouTube),HTCYOUTUBE,1,1,1,,0
Disable (Camera),IACSP20_Main,1,1,1,,0
Disable (Album),HTCAlbumClass,1,1,1,,0
Disable (Phone),Phone ,1,1,1,,115
Disable (iGO8),iGO 8,1,1,1,,0
Disable (Incoming call),Phone - Incoming,1,1,1,,0
Rotate,*,1,63,1,,0
Click to expand...
Click to collapse
S.
can someone tell me how to disable it during bubble breaker. i cnat find it in the exclusions list
sanchez13 said:
Hi, I use Gyrator2 version 2008.11.21.0
here are my settings (htc album & incoming call working fine) :
S.
Click to expand...
Click to collapse
uninstalling and reinstalling gyrator seemed to fix it i was going crazy because my settings were exactly the same as yours! now, back to uni work...
I was wondering how to only use the gyrator on 1 specific program that isn't listed? I wanted to use it with Garmin. It works when I had it rotating everything, but it just seems to lag the phone and cause me to miss calls and what not, so I deleted all the events and when I try to go add another for Garmin, I don't see it on the list? Why is that?
And is anyone experiencing a more phone lag with the gyrator running or is it just me? Should I do a format to clear up any cluster I might have from previous uninstalls and reinstalls of programs?
Yes....I would like to know how to set the phone dial pad to NOT rotate also.
Not too sure what all these 1's and 0's mean...as when you go through the settings it has specific descriptions rather than numbers to pick from....
Hi -
Having a problem with SMS notification. Don't remember whether it started after I installed HD Tweak or before.
If I specify via HD tweak not to wake up a phone when SMS arrives - I receive no sound/vibrate notification on sms unless I switch on the screen.
If I specify to wake up a phone, then everything works fine - vibrate works, BUT the screen also switchs on and so I can make accidentally touches
So is it possible to have Vibrate, Sound and NO switching on the screen when I receive SMS on the HTC Diamond2?
Yeah, i never found a solution to this myself.
So i've installed Pocketshield (disabled everything but the slide-locking), and enabled the WakeUp in the registry.
This is the default behavior, at least on my device. When I first got the device it annoyed me that I had to turn on the device manually to read a message, so I changed the reg value that controls the screen on on new messages. Unfortunately there doesn't seem to be a similar fix (reg value) for incoming emails though.
Regards,
PK
wizionus said:
Hi -
So is it possible to have Vibrate, Sound and NO switching on the screen when I receive SMS on the HTC Diamond2?
Click to expand...
Click to collapse
what reg tweak did you use?
or do you mean that you have enabled switching on the screen - in the same way as it is done via HD Tweak?
wizionus said:
Hi -
So is it possible to have Vibrate, Sound and NO switching on the screen when I receive SMS on the HTC Diamond2?
Click to expand...
Click to collapse
My device is stock and it has that behavior default! When I receive a SMS, a sound and vibration announce me, while the screen remains off!
Hi!
The one described in this thread: http://forum.xda-developers.com/showthread.php?t=506416
Regards,
PK
wizionus said:
what reg tweak did you use?
or do you mean that you have enabled switching on the screen - in the same way as it is done via HD Tweak?
Click to expand...
Click to collapse
to check “Vibrate” from Setting/Sounds&Notifications.
Then you can have " virbrate function " under suspend mode when SMS incoming~ have fun~
Hi
You should be able to fix these problems be increasing the "resuming from suspend timeout" values under Power using Advanced Config. By default it is one second which often isn't enough time for the phone to sound/vibrate when an SMS is received so try changing it to 10 or 15 seconds. When it is one second the phone goes back to sleep too quickly and sometimes the sound or vibration hasn't had to time be triggered.
Regards
Phil
paalkr said:
Hi!
The one described in this thread: http://forum.xda-developers.com/showthread.php?t=506416
Regards,
PK
Click to expand...
Click to collapse
nice..thats exactly what i needed....
i think you could switch it on using reg editor...
it posted in the earlier post