I want to flash my XDA Serra but the thing i norticed was i am unable to get the O2 network settings when i enter my mobile number it asks me to contact customer services and thats plain long!
However with the O2 phone i noticed theres like a connection program that gets the settings or unless someone has one that does the same thing.
I want to flash my phone with PROven ROM
PAYG or contract? The PAYG settings are all over this sub forum like a rash
Not sure if the links from here work or not, but they might be worth a try.
UK GPRS Settings
even if they are contract settings, just edit the settings in connections to payandgo.o2.co.uk for access point and payandgo for password and they will work
yay, an O2 user responded, i couldn't help more than i did as i am on Vodafone and mine were in a nice neat tidy CAB file.
postpay settimgs
Hi,
You could use prepay but they may cap the prepay connection speed (like they did with contracts for a long time)
postpay mobile web settings
start - settings - connections - connections - the internet - create new connection
connection name (whatever)
type: cellular line (3G, GPRS)
Access point: mobile.o2.co.uk
Username: o2web/faster/(blank) - doesnt make much difference it just allocates a different ip range address to the device with each username - i suggest o2web as this is the official one for devices. 'Faster' they use in data cards, mobile broadband etc.
Password: password
Domain: (Blank)
Finish
Soft reset
Sorted
Cheers
Ross
roscop88 said:
Hi,
You could use prepay but they may cap the prepay connection speed (like they did with contracts for a long time)
postpay mobile web settings
start - settings - connections - connections - the internet - create new connection
connection name (whatever)
type: cellular line (3G, GPRS)
Access point: mobile.o2.co.uk
Username: o2web/faster/(blank) - doesnt make much difference it just allocates a different ip range address to the device with each username - i suggest o2web as this is the official one for devices. 'Faster' they use in data cards, mobile broadband etc.
Password: password
Domain: (Blank)
Finish
Soft reset
Sorted
Cheers
Ross
Click to expand...
Click to collapse
Thank you! You posted this early last year, and it just helped me. Been having issues all morning!
Related
Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.
WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.
02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA
Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.
thanks, i will add it to my txt file
missed those
I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.
Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.
Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.
Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.
Nobody in UK on O2 pay as you go :?: :?: :?:
Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.
cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here
OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks
Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse
im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp
I have the XDA II - unlocked. I have just taken out a new contract with T-Mobile (uk) that also included a Nokia 7610. Now, I can put the sim card in my XDA II and make/receive phone calls, but I cannot for the life of me find any details whatsoever on how to set up the GPRS for internet use. Even T-Mobile couldn't help! I have been running round in circles and I am just about to grate my nipples off through frustration.
Anyone here know the T-Mobile UK internet access details? Pleaaaase
Karen x
the networking forum are filled with people asking the same questions and filled with people answering them
here is what i got from searching for tmobile in the networking forum
http://forum.xda-developers.com/viewtopic.php?p=42400#42400
Thank you However, I spent a good hour searching through posts and using the search function. They all appeared to be geared toward American T-Mobile which was of no use to me. Thank you for pointing me in the right direction
5th post in the thread had these settings
The settings you need for T-Mobile (TMobile) in the UK are:
Internet
APN - general.t-mobile.uk
User Name - user
Password - wap
Default URL - www.t-mobile.co.uk
Primary/Secondary DNS - Set Automatically (DHCP)
Mail
APN - general.t-mobile.uk
User Name - Set by your ISP
Password - Set by your ISP
SMTP Gateway - smtp.t-email.co.uk
Pop3 - Set by your ISP
Note SMTP Email is not officially supported by T-Mobile.
MMS
APN - general.t-mobile.uk
IP Address - 149.254.211.010
User Name - user
Password - one2one
URL - http://mmsc.t-mobile.co.uk
WAP
APN - general.t-mobile.uk
IP Address - 149.254.001.010
User Name - user
Password - wap
URL - http://wap.t-mobile.co.uk
Click to expand...
Click to collapse
Hi all, sorry to bother you with this one!
I got my O2 XDAII unlocked and used it with no drama at all with my Vodafone SIM. I then put the GPRS settings in and it worked fine with MSN Messenger and IE etc. I then put the MMS settings in and started sending and receiving picture messages perfectly. :lol:
The problem, i hear you ask....
Well, I got TomTom 3 and a program called POI Warner which is used to alert me of POI's (read, speed cameras :wink: ) and it wanted to connect to the Internet to update it's database. It always used to try once i'd dropped the XDA in the cradle. As something wasn't right somewhere, it used to lock up the XDA until it gave up trying and then it would release the XDA so that i could use it again. This all seemed to be because of the Activesync passthrough settings. :?
I set them as I should have (after reading on here what to do - thanks!) and then it worked fine. Still with me...??????
It seems that i can't send picture message anymore :shock:
I have all the settings from the other posts on here but somehow, my settings in the connections screen have gone loopy.
Can someone on Vodafone PLEASE PLEASE let me know what settings they have in the connections screen, be it two sets (My Work Settings and another) or (Vodafone GPRS and Vodafone MMS - as i used to have). And when you click the advanced tab at the bottom of the connection screens, which programs do you have for 'Programs that connect to the internet should use' and programs that connect to a private network should use'???
when you edit either of these, it comes up with ANOTHER connection screen - what you have got in there??
This is on top of the Server mentioned in the MMS composer screen that needs another mention of the same server in there!!!
If I can get this working with someone's help , I hereby promise to take a screenshot of every screen I have and put an idiots guide to getting this working up on the Web should I need it again!!
thanks in advance Guys!!
Firstly to clean things up a bit it'd look in the registry under [HKLM\SOFTWARE\Microsoft\ConnMgr\Destinations] and remove all but:
'The Internet'
'Work'
'My Work Network' - or whatever it was renamed to
'My ISP' - or whatever it was renamed to
Then resetup all the connections.....
Here are the settings I have, which work perfectly.
Programs that automatically connect to the Internet should connect using:
Vodafone Internet (My ISP renamed)
Programs that automatically connect to a private network should connect using:
Vodafone Live! (My Work Network renamed)
Settings:
Vodafone Internet
Under modem...
Name: Internet GPRS
modem type: Cellular Line (GPRS)
Access Point Name: Internet
User name: web
Password: ip
No extra settings under advanced
Vodafone Live!
Under modem...
Name: Vodafone Live! GPRS
modem type: Cellular Line (GPRS)
Access Point Name: wap.vodafone.co.uk
User name: wap
Password: wap
No extra settings under advanced
Under Proxy Settings...
Both boxes ticked.
Under Advanced...
WAP: 212.183.137.12 : 9201
MMS Settings:
Connect via: Vodafone Live!
Under Servers...
Vodafone MMS - just what I called it (should only be one in there)
Gateway: 212.183.137.12
Port number: 9201
Server address: http://mms.vodafone.co.uk/servlets/mms
& I put my sending size as 100K - but its your choice.
My mobile have been bought from germany but install a English OS
ROM VERSION 1.1.7.5
ROM DATE 9/22/05
RADIO 01.01.10
PROTOCOL 4.0.13.16
ext ROM 1.1.7.105
Model Wiza200
I configured the Gprs According to the CM (china mobile) settings
AP= CMWAP
IP 10.0.0.172 : 9201
Wap.monternet.com
apparently the device connect to GPRS but when I try to surf it say : THE PAGE CANNOT BE FOUND CHECK THE NAME AND TRY AGAIN;
but in fact the GPRS is connected (I can see the icon in the top)
I used the same SIM card on my OLd NOKIA and it works
I really dunno anymore how to solve it
Maybe some mistakes in the configuration....where I should add the port?
AP= CMWAP
IP 10.0.0.172 : 9201
Wap.monternet.com
Looks like WAP settings... Try to find GPRS settings, usually they are different.
Button said:
AP= CMWAP
IP 10.0.0.172 : 9201
Wap.monternet.com
I think it is WAP settings... Try to find GPRS settings, usually they are different.
Click to expand...
Click to collapse
still connect but cannot surf....do you think can be a ROM version problem?
or some settings I need on the change on the Connection--->Network cards??
I'm desperate
Settings-Connections-Add a new modem connection:
My Connection - (Enter name)
Cellular Line (GPRS)
Next - Access point name (ask your operator, i think not CMWAP)
Next - User name & Password (ask your operator)
Advanced (ask your operator)
Finish
Soft Reset
just launch your ie :wink:
Button said:
Settings-Connections-Add a new modem connection:
My Connection - (Enter name)
Cellular Line (GPRS)
Next - Access point name (ask your operator, i think not CMWAP)
Next - User name & Password (ask your operator)
Advanced (ask your operator)
Finish
Soft Reset
just launch your ie :wink:
Click to expand...
Click to collapse
still not work...what can be ? ROM software problem or hardware???
Your setting is for WAP and MMS, not GPRS.
Go to 'Setting', 'Connection', 'Connections', Add a new modem connection, Select a modem 'Cellular Line (GPRS, 3G), APN: cmnet, then leave all other fills blank.
access point: cmnet
home page:none
now it says cannot connect to CMNET
by the wat thanx for ur help
Some mistakes in the previous messages.
As a reminder, you can do WAP over GSM or over GPRS as well.
And you can do web surfing or other applications like Skype for instance or other protocols like FTP over GSM or GPRS as well also.
So, to sum-up CMWAP and CMNET are two different APN in order to acces to CMCC GPRS.
CMWAP is used for WAP browsing, but it works also for web! I use it on my Alpine since many months. It seems that you're charged per minute.
CMNET is used for Skype, FTP and other stuff like that. Charged by volume.
I don't know the cost even if I use it now since more than one year :lol:
Parameters:
APN: cmwap
In "Proxy Settings", check "This network connects to the Internet"and also "This network uses a proxy server to connect to the Internet". Then fill the field name "Proxy server" with: 10.0.0.172
Then click on "Advanced..." button
In front of HTTP, the port should be 80
In front of WAP, the port should be 9201
In front of Secured WAP, the port should be 9203
In front of Socks, the port should be 1080
APN: cmnet
Click on "Advanced..." button and go to "Servers", then select "Use specific server address" and fill it as following:
DNS: 211.136.20.203
Alt DNS: 211.136.20.203
and don't care about the homepage, you can put what you want and not only Wap.monternet.com
MMS Settings:
Gateway: 10.0.0.172
Port number: 9201
Server address: http://mmsc.monternet.com
I can warrant you that all is working perfectly with these settings all over China since my arrival here (November 2004).
By the way, if you have any information about the billing on each APN, I'm interested in!
Hope it helps!
CMWAP is 20RMB for Month!!!!!!
but by using it I can't connect to MSN...can you?
CMNET...I will try now and I will let you knoe the costs
atomicskate said:
Some mistakes in the previous messages.
As a reminder, you can do WAP over GSM or over GPRS as well.
And you can do web surfing or other applications like Skype for instance or other protocols like FTP over GSM or GPRS as well also.
So, to sum-up CMWAP and CMNET are two different APN in order to acces to CMCC GPRS.
CMWAP is used for WAP browsing, but it works also for web! I use it on my Alpine since many months. It seems that you're charged per minute.
CMNET is used for Skype, FTP and other stuff like that. Charged by volume.
I don't know the cost even if I use it now since more than one year :lol:
Parameters:
APN: cmwap
In "Proxy Settings", check "This network connects to the Internet"and also "This network uses a proxy server to connect to the Internet". Then fill the field name "Proxy server" with: 10.0.0.172
Then click on "Advanced..." button
In front of HTTP, the port should be 80
In front of WAP, the port should be 9201
In front of Secured WAP, the port should be 9203
In front of Socks, the port should be 1080
APN: cmnet
Click on "Advanced..." button and go to "Servers", then select "Use specific server address" and fill it as following:
DNS: 211.136.20.203
Alt DNS: 211.136.20.203
and don't care about the homepage, you can put what you want and not only Wap.monternet.com
MMS Settings:
Gateway: 10.0.0.172
Port number: 9201
Server address: http://mmsc.monternet.com
I can warrant you that all is working perfectly with these settings all over China since my arrival here (November 2004).
By the way, if you have any information about the billing on each APN, I'm interested in!
Hope it helps!
Click to expand...
Click to collapse
no way to connect to CM NET....I will call the Customer support and I will let you know
Really strange that you cannot connect to CMNET with these parameters...
And I'm not sure that CMCC Customer Support can do something for you as your terminal will be "Unknown" in their list... after they're definitely lost :?
Where are you living? At Shanghai the both APN works perfectly, and on all the other provinces I've visited CMWAP is working well (I never used CMNET outside Shanghai).
As I said on the previous post, it's normal that you can't use such kind of application like MSN with CMWAP APN!
About the cost of 20RMB for connecting CMWAP you surprise me coz I only have a prepaid GSM subscription... So it should mean that if I connect one time in a month I will be charge 20RMB and if I connect during many days I will be charge the same price...
I will try to have a look to CMCC wesite with my chinese teacher next time :wink:
Sure, in many Chinese cities, the CMCC began their service of 20 RMB per month for CNWAP since 2005.
but for me, I use CMNET and CMWAP both, GPRS is specially for my MSN and mail-box. but be careful, the price of GPRS is 0.03 RMB per KB!
but in Shanghai, I don't think the CMCC will give you the price of 20 RMB per month, for as everybody knows, Shanghai is an expensive city, and your Shanghaier are richamen...
Damn the CMCC!
You can surely get the CMWAP package for 20RMB in Shanghai. And CMNET got package as well, which is pretty exp..... :evil:
OK, you can get these kind of package for CMWAP as well as for CMWEB APN.
But it's not mandatory.
Since one year, I'm only using prepaid for these 2 APN.
I'm going to check if these packages are more interesting, but I doubt...
That really depends on ur usage. You can turn on the service of gprs with choice to be charged by kb or package, no matter prepaid or contract as long as u pay the money.
I did hear that someone surfs the internet by using proxy in wap, but i havent comfirmed that by myself. If it works, that really saves a lot. :lol:
I did hear that someone surfs the internet by using proxy in wap, but i havent comfirmed that by myself. If it works, that really saves a lot. Laughing
Click to expand...
Click to collapse
Please see my first post on this thread. It's really easy to surf on the web using CMWAP APN. You just have to configure the Proxy server as I said.
Good luck :roll:
You might want to check the connection rules:
start->settings->connections->connections ?
in the settings/GPRS Setting, try to chek if the CHAP authentication is checked.
Marco
Italian living in China
Hi
I have a Qtek 9100 running the O2 XDA Mini S Official WM5 Rom.
I am trying to set it up to access the internet using a PAYG o2 sim. I have followed a couple
of guides from this site but it still will not work.
I can connect to GPRS ok but when I try to connect to a page on the web,
I get an error message saying
"the page cannot be dispalyed or downloadedbecause the connection was lost. Check the onnection and try again later"
I still have a GPRS connection when I get this message.
My setting are;
modem-Cellular line (GPRS)
Access popint name - payandgo.o2.co.uk
username - payandgo
password - password
Advanced settings - use server assigned IP addesss
use server-assigned addresses
connection name o2
modem cellular line (gprs)
access point name - payandgo.o2.co.uk
username - payandgo
password - password
domain -
Advanced
use server-assigend ip address
proxy settings
both boxes ticked
http - 192.113.200.195:8080
WAP - 192.113.200.195:8080
What am I doing wrong.
I'm new to this so be gentle!!!
just figured out what I'm doing wrong.
I had two connection set up .
I have deleted the first one and now I can connect.
Pleased it's working, but it really gobbles up the cash on PAYG.
Mike
do you have to set up gprs with o2? do you have to tell them you want it?
ive got an o2 pay as you go sim, i can connect but it doesnt seem to work properlly like you stated. ive not contacted o2 to 'turn on' gprs for me so i dont know if its that.