Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.
WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.
02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA
Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.
thanks, i will add it to my txt file
missed those
I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.
Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.
Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.
Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.
Nobody in UK on O2 pay as you go :?: :?: :?:
Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.
cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here
OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks
Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse
im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp
Can someone point me in the right direction I've doen numerous searchs and talked to tech support (useless) . I have a 8125 that I picked up, although I am a AT&T sim card user (our company hasn't upgraded yet) so I unlocked the phone and it works great. although I can not access mmode or anything email or Internet related unless using wifi.
Can someone point me in the right direction for some instructions on how to get this thing set up to work with the legacy AT&T wireless system?
You need to manually enter the AT&T GPRS and MMS settings.
Call up AT&T and ask for the necessary information. They'll give it to you.
PM me you're email address I have the cab file that I can send to you.
gamescan said:
You need to manually enter the AT&T GPRS and MMS settings.
Call up AT&T and ask for the necessary information. They'll give it to you.
Click to expand...
Click to collapse
Well they don't exist anymore and the guys at Cingular could only get me so far. that's why I'm looking around for it.
Mark, you have a PM, thanks in advance
Cab file didnt work Mark. Only change it made was resetting my today backround to the default. all the settings are still the same.
is there a list of settings or a walk through for setting it up manually somewhere?
It should have worked.
Here is what I have:
MMS Configuration
Retrieve Messages Immediately
Save Sent Messages
Servers
AT-T MMSC
10.250.250.100
9201
http://mymsc.mymmode.com
My Work Network
100k
Wap 1.2
My ISP
AT-T Internet
Cellular Line (GPRS)
Proxy - Proxy Name
Work Network
AT-T WAP
Proxy - Proxy Name
Proxy
This network connects to the internet
This network uses a proxy server
WAP 10.250.250.250 9201
Secure WAP 10.250.250.250 9203
Hope this makes sense.
Another option is to go to the Cingular web page and choose Support, Phone/Device Support.
Select the following:
Network: former AT&T Wireless"
Manufacturer: Siemens
Model: SX66
Use the information in Device Setup to configure the browser/internet and MMS settings. It won't match exactly because the SX66 is a 2003 device, but you should be able to figure it out.
Hope someone can help me here. I paid Orange £20 to give me the code for unlocking the phone - this worked fine and I can now use my O2 SIM. Does anyone know the definitive settings on the M5000 to access the O2 network for both email and MMS? A walkthrough would really be appreciated. I've set-up a new POP3 email account and want to use my own inbox and O2's SMTP server. However, when I click on send/receive I get a message saying "cannot connect with your current settings, to change your connection settings, tap settings" - doing this this leads me to Orange World and My Work Network. Can anyone shed any light or help?
Thanks
GPRS Settings for O2 in the UK
M5000 GPRS Settings.
Manage existing connections –
My Connection 1 – mobile.o2.co.uk
Enter a name for the connection
My Connection 1
Select a modem
Cellular Line (GPSR)
Access Point Name
Mobile.o2.co.uk
User Name – o2web
Password – ******* - place your o2 password
Domain – “Blank”
Advanced –
TCP/IP
User server-assigned IP Address
Servers
Use Specific Server Address
DNS – 193.113.200.200
Alt DNS – 193.113.200.201
WINS – 0.0.0.0.
Alt WINS 0.0.0.0
Hope this works for you.
Holyman
Hi Guys,
I've been reading a lot of forums discussing internet access through O2's PAYG system, many think it cant be done and although you will be restricted there is a way.
On any O2 PAYG connected PPC you must add the settings for the internet in "My Work Network" - this gives you access to port numbers which aren't easily accessible through "My ISP" settings.
Add these details...
O2 GPRS settings (WAP):
Note: These settings were taken from http://www.filesaveas.com/gprs.html with some slight modifications from myself.
Homepage: http://wap.o2.co.uk/
APN address : payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : payandgo
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Port number: 80
The Port number "80" is the most crucial point, O2 has blocked port 8080 which is a standard for internet access but 80 will give you 90% of all web pages too.
You will unfortunately still be blocked from MSN messenger and POP email accounts, I havent tried any exchange servers yet but I would expect to be blocked from them too.
O2 dont want you to know that internet access is available through PAYG with the right settings, I hope this may help some of you.
Good Luck
Terryd1980
I want to flash my XDA Serra but the thing i norticed was i am unable to get the O2 network settings when i enter my mobile number it asks me to contact customer services and thats plain long!
However with the O2 phone i noticed theres like a connection program that gets the settings or unless someone has one that does the same thing.
I want to flash my phone with PROven ROM
PAYG or contract? The PAYG settings are all over this sub forum like a rash
Not sure if the links from here work or not, but they might be worth a try.
UK GPRS Settings
even if they are contract settings, just edit the settings in connections to payandgo.o2.co.uk for access point and payandgo for password and they will work
yay, an O2 user responded, i couldn't help more than i did as i am on Vodafone and mine were in a nice neat tidy CAB file.
postpay settimgs
Hi,
You could use prepay but they may cap the prepay connection speed (like they did with contracts for a long time)
postpay mobile web settings
start - settings - connections - connections - the internet - create new connection
connection name (whatever)
type: cellular line (3G, GPRS)
Access point: mobile.o2.co.uk
Username: o2web/faster/(blank) - doesnt make much difference it just allocates a different ip range address to the device with each username - i suggest o2web as this is the official one for devices. 'Faster' they use in data cards, mobile broadband etc.
Password: password
Domain: (Blank)
Finish
Soft reset
Sorted
Cheers
Ross
roscop88 said:
Hi,
You could use prepay but they may cap the prepay connection speed (like they did with contracts for a long time)
postpay mobile web settings
start - settings - connections - connections - the internet - create new connection
connection name (whatever)
type: cellular line (3G, GPRS)
Access point: mobile.o2.co.uk
Username: o2web/faster/(blank) - doesnt make much difference it just allocates a different ip range address to the device with each username - i suggest o2web as this is the official one for devices. 'Faster' they use in data cards, mobile broadband etc.
Password: password
Domain: (Blank)
Finish
Soft reset
Sorted
Cheers
Ross
Click to expand...
Click to collapse
Thank you! You posted this early last year, and it just helped me. Been having issues all morning!