Database Users

Rogers AT&T settings

What are the WAP/Data settings needed to use a non-Rogers phone on your network?
Description
Activating a non-Rogers phone on the Rogers AT&T Wireless network.
Answer
In order to connect to the Rogers AT&T Wireless GPRS Network through a WAP Browser, a subscription to a My Mobile HomePage service package is required. Rogers AT&T Wireless phones are pre-loaded with the WAP settings; however non-Rogers phones must be programmed with this information.
The settings required are as follows:
Primary IP: 208.200.067.150
Primary Port: 9203
Secondary IP: 208.200.067.151
Secondary Port: 9201
APN: goam.com
Username: wapuser1
Password: wap
HomePage: http://mymobilehomepage.rogers.com/
In order to subscribe to a My Mobile HomePage service package, please contact our Customer Care Centre at 800-268-7347 or for Technical Support, contact our HelpCentre at 866-931-3282, Option 3-1 and one of our consultants will be happy to assist you.

Thanks for info
Thanks for that information,
I have been trying to get ROGERS to tell me that information for the last month, but they don't like anwering any questions for unsupported devices.
By the way... which WAP browser are you using. Are they any other alternatives to EZWAP?
Cheers... pk

Re: Thanks for info
peter_cppc said:
Thanks for that information,
I have been trying to get ROGERS to tell me that information for the last month, but they don't like anwering any questions for unsupported devices.
By the way... which WAP browser are you using. Are they any other alternatives to EZWAP?
Cheers... pk
Click to expand...
Click to collapse
Hi Peter,
I have been using the included ezwap. Works well so I haven't spent any time trying other applications. Mind you the Rogers wap site does have some problems. The site does not work exactly as indicated on the mobile home page.

Re: Thanks for info
md said:
peter_cppc said:
Thanks for that information,
I have been trying to get ROGERS to tell me that information for the last month, but they don't like anwering any questions for unsupported devices. By the way... which WAP browser are you using. Are they any other alternatives to EZWAP? Cheers... pk
Click to expand...
Click to collapse
Hi Peter,
I have been using the included ezwap. Works well so I haven't spent any time trying other applications. Mind you the Rogers wap site does have some problems. The site does not work exactly as indicated on the mobile home page.
Click to expand...
Click to collapse
Couple of questions:
1) Included EZWAP? Which version... I am using 2.5. I cannot find where to enter some of the addresses/ports you have provided under EZWAP or the CONNECTIONS setting for the XDA.
2) Can you access any banking sites on the Rogers mymobilehomepage?
3) What device does Rogers think you have. When I actually conncected once with the Rogers wap site it have me the following error "Your mobile device has not been recognized. Please contact Rogers AT&T customer care for assistance"
Thanks for the help so far... look forward to your responses. PK

Set-up for SX56
I'm having trouble accessing the Internet on my SX56 with these settings. I can establish a connection, however I cannot access anything with EZWAP or Internet Explorer.
I'm not sure how to use the IP address and port settings provided. The SX56 only has room for one IP Address and when I used the primary IP address above, I could no longer connect.
I've simply used goam.com as the APN and the wapuser1 and wap as the login information.
Are there any other settings I should be using (DNS, Domain, etc.). Thanks in advance for any help.
JT

I am using SX56 with Rogers AT&T in Canada and it works fine. You do not use goam, simply change that to internet.com and user name is : wapuser1 and password: wap. do not put any D.N.S. or anything. give that a try.

Thanks a lot...works like a charm!

I tried your recommendations on my SX56 with Rogers AT&T and get the same message regardless if I use internet.com or vpn.com. Yet I have managed to get a page to load with internet.com after several attempts.
With vpn.com, it says...
Cannot Connect
Dialed: vpn.com
The answering modem has disconnected. To check your connection settings and change them if needed, tap Settings.
With internet.com, it says...
Cannot Connect
Dialed: internet.com
The answering modem has disconnected. To check your connection settings and change them if needed, tap Settings.
Could this be a signal strength issue? (See my post in the General Forum)

Can connect - just can't access anything
I've tried the various connections mentioned above. I've also tried using "goam.com" and "internet.com". I can make a connection using "goam.com" but can't access any web pages or WAP. Internet Explorer keeps giving me the message that the web page cannot be found.
Anyone have any suggestions or ideas?
Thanks in advance. I look forward to everyone's responses.

you need to subscrbe to a data plan from rogers... it's not free.

I realize that it's not free - although I wish it were
I have subscribed to a data plan.

Please Help!! Need ATTWS GPRS?WAP Settings

I have been trying , unsucessfully, to configure my Siemens SX56 to connect to the internet and send e-mail after I upgraded to the Special Rom. It connects but doesn't load the pages and it tells me it cannot connect with current settings. I do not want to wipe clean my device and start over w/o the Special Rom because it has so many cool apps and after my contract expires I am on my way to T-Mobile, so unlocking is key! I have looked at this forum and there is no settings for ATTWS in US. Only Rogers (Canada) Can someone please help this newbie!
Thanks in advance for answering

AT&T WAP Settings
I figured it out since no one seemed to know. If anyone needs any settings for AT&T (US) here they are:
HTTP: localhost Port: 9090
WAP: 10.250.250.250 Port: 9201
Socks: 127.0.0.1 Port: 1080
Type is Socks 4
I created a new connnection called "MY connection Two" since the regular "GPRS connection" tab did not have a tab for proxy settings.

Re: AT&T WAP Settings
LBowers said:
I figured it out since no one seemed to know.
Click to expand...
Click to collapse
Sorry, I was away for a bit and would have answered if I had seen your request. The other parts I would add to your listed config are that the Access Point Name (APN) is:
Proxy
If you select Cellular Line (GPRS) as the transport, the dialing info will be filled in correctly by itself, resulting in something like "~0GPRS!Proxy" (not sure if that's exact, my XDA isn't right here. If for some reason you need to manually set a GPRS dial sting for ATTWS I believe it is:
*99*#
As opposed to to T-Mobile which is *99***2#

Thanks for answering Mad Max!!
Now if I can only get my Internet Explorer to work I would be all set!!!

Hi,
I'm an att sx56 user, flashed to t-mobile's 40016 for 2003. Everything works real nice but I can't seem to get the att gprs settings correct. Here's what I have,
For Modem Settings:
----------------------
Name: Myatt
Cellular Line(GPRS)
APN: *99*# ( i've also tried +0 ~GPRS!proxy)
username/password/domain all blank
TCP/IP: Use server specified IP address
Server: Use server assigned address
VPN Empty:
Proxy Settings:
-----------------
Localhost 9090
10.250.250.250 9201
127.0.0.1 1080
Socks4
Do you know if I'm missing anything or what I've got set wrong here?
Thanks!

elor said:
...but I can't seem to get the att gprs settings correct. Here's what I have,
For Modem Settings:
----------------------
APN: *99*# ( i've also tried +0 ~GPRS!proxy)
Click to expand...
Click to collapse
The APN should just be "proxy" alone. All the other junk (+0~GPRS!) is stuff the system fills in when it displays the dialing status, but shouldn't be included in your entry in the APN field. You shouldn't need to enter the *99*# string anywhere either unless you need to establish your own dialing config for some reason.
Also, the fact that you're entering proxy configs in WM2003 implies that you're setting up you connection under the "work settings" section as opposed to the "internet settings", which is fine, just wanted to make sure that's what you intended. Under 2003, unless you need to set proxy settings for your specific needs, then setting the APN name to "proxy" and selecting "Cellular Line (GPRS)" as the modem is pretty much all you need to do.

I have done what you both have said and still NO LUCK! AHH ok here is all of my specs:
Siemens SX56:
Windows Pocket PC Version 3.0.12039
ROM Version 3.17.03 ENG
ROM DATE 5/15/03
Radio Version A.20.10
Protocol Version 324e4

Confirming you're using the XDA-Dev SP ROM 1.2 if so leave try leaving your "proxy" settings blank and see if that helps.
HTH

no tilde stuff
I have been trying to do this stuff for a while now....
I am having the "page cannot be found" problem.
ppcpe 2003
ROM version : 4.00.05 ENG
Radio version: A.20.10
protocol version: 324e4
I set up a new connection called My GPRS.
I have all the right proxy settings (I've been reading forums on this for weeks now) I put "proxy" in as my APN name. On the modem tab, i have
Name: My Connection 1
Number: proxy
I don't see the ~GPRSyadayada....just proxy.
I have the Network Settings using My GPRS connection.
Here's the cooky part...I have a Yahoo chat software package that works great! I can send and receive like it's going out of style. But I cannot get Either internet explorer OR ftxPBrowser to connect to any pages.
What's up here?

Cingular USA MMS Settings?

Just joined Cingular today and am having MMS problems. I've searched on "Cingular MMS" thruout this forum but have not seen any WIZARD USA MMS connection settings. Remember, WIZARD is using WM5 which has a few differences in these setups.
I signed up with Cingular's MEdiaWorks which has data and MMS. I have the data connect working. My settings:
1) My ISP
2) Add a new modem connection
3) Name for connection: <user choice>
4) Modem: Cellular Line (GPRS)
next
5) APN: wap.cingular
next
6) Username, password & domain: leave blank
finish
This works, connects to Cingular data and I've had up to 135Kbps data rates which is definantly EDGE speeds.
Now for MMS, which I can't get working. I also have never used MMS so I'm not sure of it's interaction with connections, WAP and the phone.
I send a MMS message, it connects,is sending and returns with error message:
"Unable to send your message(s). Your message(s) will be saved in the Outbox."
In MMS section, I click of Menu (WM5)-MMS Configuration, up comes 3 tans. Here are my Servers settings:
Server Name: Cingular MMSC
Gateway: 66.209.11.61
Port Modem: 9201
Server address: http://mmsc.cingular.com
Connect via: (I've tried My ISP and My Work Network without success)
Sending size limitation: 100K
WAP Version: WAP 2.0
In searching, suggestions were to set up a "My Work Network" connection as follows:
Connection name: WAP
Modem: Cellular Line (GPRS)
next
APN: wap.cingular
User name: [email protected]
Password: CINGULAR1
Domain: blank
finish
Then they said to set up a proxy server which I did as follows:
Check box "This network connects to the Internet"
Check box "This network uses a proxy server ..."
Leave proxy server blank
Click on Advanced
Set both WAP and Secure WAP to:
Server: 66.209.11.61
Port: 9201
User names, password and domain, leave blank
This does not work.
Interestingly, the two connections (My ISP & My Work network) have the same APN, wap.cingular?????
I read one post saying something like you had to configure MEdia Works on your phone. What does this mean?
Any thoughts in the WIZARD community would be helpful. Does Cingular USA even support MMS for the WIZARD??? Yikes
I haven't even got to setting up Express Mail yet. I'm sure another post is comming.
Thanks all
Craig

Just install this and it should work. :lol:

fone_fanatic said:
Just install this and it should work. :lol:
Click to expand...
Click to collapse
Did you forget to attach a "this"?? I don't see what you are referring to. Appreciate it and thanks.

cshields1 said:
fone_fanatic said:
Just install this and it should work. :lol:
Click to expand...
Click to collapse
Did you forget to attach a "this"?? I don't see what you are referring to. Appreciate it and thanks.
Click to expand...
Click to collapse
Opps, my broadband was a little slow in filling out the rest of your message. Got it but I've tried this CAB without success. I'll give it another try.

yah, i just tried to send an mms and it didn't work. have you tried giving cingular a call? If they can't help waiting a month or so would be good because thats when the wizard100 is supposed to come out on cingular.

see http://www.bengalboy.com/modules/newbb/viewtopic.php?topic_id=42&forum=8 for the settings

fone_fanatic said:
yah, i just tried to send an mms and it didn't work. have you tried giving cingular a call? If they can't help waiting a month or so would be good because thats when the wizard100 is supposed to come out on cingular.
Click to expand...
Click to collapse
The HTC WIZARD for Cingular is actualy the HTC 8125 model. Do a google search on 'Cingular 8125' and you see lot's of info. Even Best Buy are starting to carry them ...
I signed up for expressMail from Cingular but they don't have the phone client posted on their web site for the 8125 (Wizard). They do have the HTC 2125 (Smartphone) client but don't offer that phone for sale at their site anyway.
I think we're getting closer to the Wizard at Cingular.

best buy is selling the 8125's alreadY? i'm gonna make a trip down there today!

fone_fanatic said:
best buy is selling the 8125's alreadY? i'm gonna make a trip down there today!
Click to expand...
Click to collapse

Cingular MMS Settomgs
Here's a CAB file with the MMS settings for Cingular. It seems to work on my Qtek 9100.

does someone have the same cab file for t-mobile usa (to be used with qtek 9100)

Here's the VPN enabled and without VPN CAB files (USA)
I have attached both the VPN enabled and non-VPN enabled CAB files.

Now that the 8125 is out on cingular, all the mms and medianet settings can be found on the cingular support site. Check it out here:
https://onlinecare.cingular.com/dev...se=cingular&make=Cingular&model=8125&x=26&y=5

GPRS settings for Suncom

I have a At&T 8525 that I have unlocked to use with Suncom service in USA but I am unable to access the web and I am looking for the correct settings to do this. SUncom will not give the settings to me, also if possible the directions to install if settings are available-thanks

naacdw said:
I have a At&T 8525 that I have unlocked to use with Suncom service in USA but I am unable to access the web and I am looking for the correct settings to do this. SUncom will not give the settings to me, also if possible the directions to install if settings are available-thanks
Click to expand...
Click to collapse
Give this a try. It doesn't have the 8525 listed (of course). But I'm sure you can choose one of the other devices and the info should be somewhat standard.

gprs settings for suncom
I am using an HTC TyTn, it is very similar.
the settings that i haqve gotten to work after much trial and error are as follows.
make a new connection called "internet"
Cellular line GPRS
access point name: mobileinternet
user name, password, and domain are blank
and thats it.
MMS settings are:
create a server i called it suncom mms
gateway: 66.150.33.115
port:9201
server address: http://mms.suncom.net:8088/mms
connect via: i set to my isp (im not sure if this matters but it is working)
wap version: WAP 1.2
The wap version and port number are fixed on my phone. I have found that the port number is more inportant than the wap version.
I hope this helps.

thanks for the settings but I am still unable to send MMS --I set the WAP as the gateway #is that the correct place to enter it

Hi I have a Tytn II with Dutty's WM6.1 Official UC 5.2.19199 RTM
and I want to use these settings for the MMS but I don't know how to create the server.
I've looked through the phone but can't find it.
Can anyone help me out?

1 thing he messed up on..on the connect via dont put " my isp" put the internet

t-mobile settings internet,mms,data

I 'm new to the board.i've always looked on here for advice though.I picked up a htc maple running wm 6.5.its really nice.I need some help setting up the configurations for receiving mms,data,and internet for the u.s. west coast.i racked my brain trying to try different combinations.i can receive data connection,texting ,but no mms.so any help specific the the three settings on the maple would be great.thanks again, happy holidays

settings
raphyrod said:
I 'm new to the board.i've always looked on here for advice though.I picked up a htc maple running wm 6.5.its really nice.I need some help setting up the configurations for receiving mms,data,and internet for the u.s. west coast.i racked my brain trying to try different combinations.i can receive data connection,texting ,but no mms.so any help specific the the three settings on the maple would be great.thanks again, happy holidays
Click to expand...
Click to collapse
It worked for me when i change it to mms settings: wap.voicestream.com and save and reboot

gprs, proxy settings
i have my mms settings on that also.can you tell me a breakdown of your t-mobile data,t-mobile internet,and t-mobile mms settings under gprs.i also have proxy settings put in.maybe there shouldnt be a proxy? i'm completely stifled. please help thanks

pm'd you
raphyrod said:
i have my mms settings on that also.can you tell me a breakdown of your t-mobile data,t-mobile internet,and t-mobile mms settings under gprs.i also have proxy settings put in.maybe there shouldnt be a proxy? i'm completely stifled. please help thanks
Click to expand...
Click to collapse
check your inbox. those settings should help you out. they have worked great for me in the past.

can post those settins in the forum please. I need help with this too.

if i post them in the forum there will be a debate started.
check your inbox as well.

Settings?
I too am looking for the settings, specially for MMS. Internet and SMS seem to work fine but MMS is a 'no-go.' Oh, I too am on WM6.5... and does anyone know what happened to T-Mo's configuration pages? Now it's a pay service?!?!

yea i need these settings too can someone post them on this page??

these settings are readily available on the internet.
If anyone gets charged any fees for using this dont complain to me. this is not exactly the best setup but it does work. all it is is the tzones proxy work around with a step or 2 added nothing that hasnt been posted before. but still its not my info i'm just passing it along.
In Settings/Connections/GPRS/T-Mobile Data:
Tmobile Data Connects to: WAPNetwork
Access Point: wap.voicestream.com
Add a 2nd GPRS option:
T-Mobile Data 2
Connects to: Work
Access Point: wap.voicestream.com
T-mobile internet
connects to : internet
access point: wap.voicestream.com
T-Mobile MMS
connects to : T-Mobile MMS
access point: wap.voicestream.com
Then create TWO Proxies:
Settings/Connections/Proxy
First Proxy:
Name:Tzones Proxy
Connects from: WAP Network
Connects to: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
Second Proxy:
Name Tzones Proxy 2 Connects from: Work
Connects to: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
after all of these settings have been completed install this cab http://forum.xda-developers.com/atta...8&d=1253220068 and reboot your device

MMS
http://forum.xda-developers.com/showpost.php?p=5042335&postcount=633
Internet:
Settings/Connections/GPRS/T-Mobile Data and T-Mobile Internet
Access point: epc.tmobile.com
Everything is blank Priomary and Secondary DNS are 0.0.0.0
I have used internet2.voicestream.com for access point as well, but do not notice any difference anymore.