Database Users

Cingular USA MMS Settings?

Just joined Cingular today and am having MMS problems. I've searched on "Cingular MMS" thruout this forum but have not seen any WIZARD USA MMS connection settings. Remember, WIZARD is using WM5 which has a few differences in these setups.
I signed up with Cingular's MEdiaWorks which has data and MMS. I have the data connect working. My settings:
1) My ISP
2) Add a new modem connection
3) Name for connection: <user choice>
4) Modem: Cellular Line (GPRS)
next
5) APN: wap.cingular
next
6) Username, password & domain: leave blank
finish
This works, connects to Cingular data and I've had up to 135Kbps data rates which is definantly EDGE speeds.
Now for MMS, which I can't get working. I also have never used MMS so I'm not sure of it's interaction with connections, WAP and the phone.
I send a MMS message, it connects,is sending and returns with error message:
"Unable to send your message(s). Your message(s) will be saved in the Outbox."
In MMS section, I click of Menu (WM5)-MMS Configuration, up comes 3 tans. Here are my Servers settings:
Server Name: Cingular MMSC
Gateway: 66.209.11.61
Port Modem: 9201
Server address: http://mmsc.cingular.com
Connect via: (I've tried My ISP and My Work Network without success)
Sending size limitation: 100K
WAP Version: WAP 2.0
In searching, suggestions were to set up a "My Work Network" connection as follows:
Connection name: WAP
Modem: Cellular Line (GPRS)
next
APN: wap.cingular
User name: [email protected]
Password: CINGULAR1
Domain: blank
finish
Then they said to set up a proxy server which I did as follows:
Check box "This network connects to the Internet"
Check box "This network uses a proxy server ..."
Leave proxy server blank
Click on Advanced
Set both WAP and Secure WAP to:
Server: 66.209.11.61
Port: 9201
User names, password and domain, leave blank
This does not work.
Interestingly, the two connections (My ISP & My Work network) have the same APN, wap.cingular?????
I read one post saying something like you had to configure MEdia Works on your phone. What does this mean?
Any thoughts in the WIZARD community would be helpful. Does Cingular USA even support MMS for the WIZARD??? Yikes
I haven't even got to setting up Express Mail yet. I'm sure another post is comming.
Thanks all
Craig

Just install this and it should work. :lol:

fone_fanatic said:
Just install this and it should work. :lol:
Click to expand...
Click to collapse
Did you forget to attach a "this"?? I don't see what you are referring to. Appreciate it and thanks.

cshields1 said:
fone_fanatic said:
Just install this and it should work. :lol:
Click to expand...
Click to collapse
Did you forget to attach a "this"?? I don't see what you are referring to. Appreciate it and thanks.
Click to expand...
Click to collapse
Opps, my broadband was a little slow in filling out the rest of your message. Got it but I've tried this CAB without success. I'll give it another try.

yah, i just tried to send an mms and it didn't work. have you tried giving cingular a call? If they can't help waiting a month or so would be good because thats when the wizard100 is supposed to come out on cingular.

see http://www.bengalboy.com/modules/newbb/viewtopic.php?topic_id=42&forum=8 for the settings

fone_fanatic said:
yah, i just tried to send an mms and it didn't work. have you tried giving cingular a call? If they can't help waiting a month or so would be good because thats when the wizard100 is supposed to come out on cingular.
Click to expand...
Click to collapse
The HTC WIZARD for Cingular is actualy the HTC 8125 model. Do a google search on 'Cingular 8125' and you see lot's of info. Even Best Buy are starting to carry them ...
I signed up for expressMail from Cingular but they don't have the phone client posted on their web site for the 8125 (Wizard). They do have the HTC 2125 (Smartphone) client but don't offer that phone for sale at their site anyway.
I think we're getting closer to the Wizard at Cingular.

best buy is selling the 8125's alreadY? i'm gonna make a trip down there today!

fone_fanatic said:
best buy is selling the 8125's alreadY? i'm gonna make a trip down there today!
Click to expand...
Click to collapse

Cingular MMS Settomgs
Here's a CAB file with the MMS settings for Cingular. It seems to work on my Qtek 9100.

does someone have the same cab file for t-mobile usa (to be used with qtek 9100)

Here's the VPN enabled and without VPN CAB files (USA)
I have attached both the VPN enabled and non-VPN enabled CAB files.

Now that the 8125 is out on cingular, all the mms and medianet settings can be found on the cingular support site. Check it out here:
https://onlinecare.cingular.com/dev...se=cingular&make=Cingular&model=8125&x=26&y=5

T-Zones USA

I'm not sure if any of you have had this problem.
I've been using t-zones for my imate jam for more than a year to surf the web and IM my friends. A few weeks ago it stopped working and I finally got fed up and called them to see what the problem was. After being on the phone for more than an hour trouble shooting with them, they finally told me that they updated the system.
They said the t-zones connection no longer supported port 80 connections (internet connection). This explained a lot since I am able to connect to t-zones, but not get any content from my browser.
Has anyone had this same problem? Is there a way around it besides getting the $20 Internet Feature from t-mobile?

Try to put this into the HTTP proxy setting:
HTTP proxy: getmorespeed.voicestream.com port 8080
Hope this will work out for you.
And also, its not longer $20, now its $30, they bundle it with Hotspot. No more option to have just the GPRS.

This kinda defeats the whole point of having a PDA phone for me if I can't get cheap internet on it. For $30 I'd expect to get an EDGE connection, not some crappy 5kbs connection.
Oh well.

so, the proxy above doesn't work out for you?
I still have the t-zone for $6 month and my connection still works so far with the proxy above.

well I'll have to call tmobile and have them activate my tzones again (I hate paying for unusable services) I'll keep you posted with any updates. Are you able to use the wap.voicestream.com still or does that one no longer work for you?

You can do it on-line in the T-Mobile web site. Just re-check the T-MobileWeb option and tomorrow morning it will start working again.
If it does not work out, then you go back to the T-Mobile web site and uncheck the T-Mobile web again. And the changes will be effective the following day. Then you will pay 1/30 times $6 for that 1 day service.
I still use wap.voicestream.com with the proxy setting I mentioned above.
Generally I can browse the web, and I can sync to my company Exchange server.

for some reason the check box in grayed out and I'm not able to check the stupid box. I'll wait till tomorrow to see if there is any change.

Thank You... That worked for me...

ok so I've got t-zones back up and running and I've set the address to getmorespeed.voicestream.com but I'm not sure what the port 8080 is? I searched through all my settings and was not able to find anyhting that looked similar to this. does anyone have a screen capture of it to give me a better idea where to look?

I think you set it wrong.
The access point name (APN) in the GPRS setting is still wap.voicestream.com
After you set that up, then you go to the Proxy Setting, and add the HTTP proxy: getmorespeed.voicestream.com and when you click Advanced, you will see the default proxy port number is 80. Change it to 8080.

I think you set it wrong.
The access point name (APN) in the GPRS setting is still wap.voicestream.com
After you set that up, then you go to the Proxy Setting, and add the HTTP proxy: getmorespeed.voicestream.com and when you click Advanced, you will see the default proxy port number is 80. Change it to 8080.

Try to put this into the HTTP proxy setting:
HTTP proxy: getmorespeed.voicestream.com port 8080
Hope this will work out for you.
Click to expand...
Click to collapse
I love you! Thank you so much!

lie_ui... You are a genius

Cingular 8125 on AT&T

Can someone point me in the right direction I've doen numerous searchs and talked to tech support (useless) . I have a 8125 that I picked up, although I am a AT&T sim card user (our company hasn't upgraded yet) so I unlocked the phone and it works great. although I can not access mmode or anything email or Internet related unless using wifi.
Can someone point me in the right direction for some instructions on how to get this thing set up to work with the legacy AT&T wireless system?

You need to manually enter the AT&T GPRS and MMS settings.
Call up AT&T and ask for the necessary information. They'll give it to you.

PM me you're email address I have the cab file that I can send to you.

gamescan said:
You need to manually enter the AT&T GPRS and MMS settings.
Call up AT&T and ask for the necessary information. They'll give it to you.
Click to expand...
Click to collapse
Well they don't exist anymore and the guys at Cingular could only get me so far. that's why I'm looking around for it.
Mark, you have a PM, thanks in advance

Cab file didnt work Mark. Only change it made was resetting my today backround to the default. all the settings are still the same.
is there a list of settings or a walk through for setting it up manually somewhere?

It should have worked.
Here is what I have:
MMS Configuration
Retrieve Messages Immediately
Save Sent Messages
Servers
AT-T MMSC
10.250.250.100
9201
http://mymsc.mymmode.com
My Work Network
100k
Wap 1.2
My ISP
AT-T Internet
Cellular Line (GPRS)
Proxy - Proxy Name
Work Network
AT-T WAP
Proxy - Proxy Name
Proxy
This network connects to the internet
This network uses a proxy server
WAP 10.250.250.250 9201
Secure WAP 10.250.250.250 9203
Hope this makes sense.

Another option is to go to the Cingular web page and choose Support, Phone/Device Support.
Select the following:
Network: former AT&T Wireless"
Manufacturer: Siemens
Model: SX66
Use the information in Device Setup to configure the browser/internet and MMS settings. It won't match exactly because the SX66 is a 2003 device, but you should be able to figure it out.

Setting up mms manualy, help please

Hey
i can not receive mms messages i get them thro but i can not download the content, i click download an it says in a warning box " unable to receive you message, your message notifacation will remain in the inbox.
How do i set it up manualy?
Xda mini s with o2
cheers
Chris

I also need help for setting up my 8125(wizard) for T-mobile mms...
Thanks in advance

Anything???

I just recently setup the MMS on my Xda Exec. I live in Toronto and am using Fido so just looked up their settings on the internet and had everything working after alot of trial and error. Here are a few websites that I used, maybe it can help you out. There is one page that has information from carriers all around the world.
http://www.expansys.es/forumthread.asp?code=I-MATE_SP3I_US&thread=9
http://www.voq.com/site/downloads/GPRSSettings.htm#Canada
http://www.expansys.jp/forumthread.asp?code=I-MATE_III&thread=42
http://www.dslreports.com/faq/7418
http://www.canadiancontent.net/forums/about5138.html
http://www.howardforums.com/archive/topic/452397-1.html
http://www.unlocks.co.uk/gprs_settings.php#canada
http://www.taniwha.org.uk/gprs.html
http://discuss.treocentral.com/showthread.php?t=82095

chris267 said:
Hey
i can not receive mms messages i get them thro but i can not download the content, i click download an it says in a warning box " unable to receive you message, your message notifacation will remain in the inbox.
How do i set it up manualy?
Xda mini s with o2
cheers
Chris
Click to expand...
Click to collapse
See my post near the end of this thread http://forum.xda-developers.com/viewtopic.php?t=61529&highlight=

Settings for FIDO?
neptune said:
I just recently setup the MMS on my Xda Exec. I live in Toronto and am using Fido so just looked up their settings on the internet and had everything working after alot of trial and error. Here are a few websites that I used, maybe it can help you out. There is one page that has information from carriers all around the world.
I have been browsing quite a bit to find all appropriate settings for my XDA Exec to work on Fido in Montreal. I also spoke to customer service; they were kind enough to walk me through basic setup and flip a switch on my account to allow MMS and WAP.
Could you compare your parameters with the following?
Settings/Connections/Advances/Manage Existing Connections
Connection Name: My Connection
Access Point Name: wap.fido.ca
user: fido
password: fido
Domain: 205.151.011.011
Settings/Connections/Advanced/Select Networks/
Programs that automatically connect to the internet should connect using: My ISP
Programs that automatically connect to a private network should connect using: My Work Network
Settings/Connections/Advanced/Select Networks/My MMS
Add Modem named Fido MMS with the following attributes
Access Point Name: mms.fido.ca
user: fido
password: fido
Domain: blank
Proxy settings tab: do not check anything
Settings/Network/GPRS Settings
Authentication: CHAP Authentication
GPRS - Setting: Class 10 (3R2T)
Messaging Settings/MMS
Preferences/OK to Download when Roaming : yes (fido uses also Rogers network now)
Messaging Settings/MMS/Servers
Server name : Fido MMS
Gateway : 205.151.11.13
Port number: 8080
server address: http://mms.fido.ca
connect via: my mms
Sending size limitation: 200K
WAP Version : WAP 2.0
I am getting crazy
Please help!!
Click to expand...
Click to collapse

T-Mobile USA MMS & XM6r3

I have a T-Mo USA MDA with XM6r3. I am not receiving any MMS messages. If I try a send and receive in the MMS messages inbox I get an error synching. Regardless of whether it is supposed to sync or not, I am not getting any MMS messages.
This is what I have setup;
Gateway - 216.155.165.50
Port - 9201
Server address - http://216.155.174.84/servlets/mms
Connect via - T-Mobile MMS (other choices are My work, my isp, work, secure wap, the wap, the internet)
Sending Size Limitations - 300K
Wap Version - 2.0 (1.2 also available)
Does this sound right? Anything else I should be doing?
Any help would be appreciated. Thanks in advance.

This is what I use.
Gateway - 216.155.165.50
Port - 8080
Server address - http://216.155.174.84/servlets/mms
Connect via - The Internet
Sending Size Limitations - 300K
Wap Version - 2.0

Thanks. I have also tried 8080 and a few others without any success. Anything else?

Cymru1 said:
Thanks. I have also tried 8080 and a few others without any success. Anything else?
Click to expand...
Click to collapse
Download network wizard and copy cab file to phone. Delete all current connection settings including MMS settings and then install Network Wizard and run it. Select USA as the country and T-Mobile as your carrier and it will automatically configure it all for you and it will work afterwards. What it does is automatically downloads your settings from the network for a painless setup.

Do you have any internet plan?
had the same problem as you and found out that my internet settings were wrong. Once I put in the correct info, everything was working fine.
I use the 5.99 plan proxy.

inmatekay said:
Do you have any internet plan?
had the same problem as you and found out that my internet settings were wrong. Once I put in the correct info, everything was working fine.
I use the 5.99 plan proxy.
Click to expand...
Click to collapse
You are right about that, but not giving him any information. Network Wizard takes care of everything you just mentioned short of paying for your data plan.

Um... theres no USA option in network wizrd just installed it. A little insight would help.

Thanks to all for the help. Now I can send and receive MMS messages!