Related
Dear Forum Users,
fist of all sorry for the fact that my first post is a request, a question and not a contribution - but im really dependent on your knowledge.
Despite the fact that in general it is not recommended to change the cover of your mda (or xda etc) I did it, and seem to have f***** up my display. The device itself is working just fine, i can do active sync, the taping also works (when i switch it off and guess where the yes button from "do you really want to turn off your device" is it actually shuts down properly). the thing is that i dont see anything, its just plain white.
Image:
http://content.imagesocket.com/images/CIMG4803_Small_805.JPG
when dissecting the unit i disconnected the connector from the display to mainboard in order to unmount everything (unfortunately i discovered afterwards that i could also have done it without connecting - dumb philipp :/ , but right now that doesnt change anything for me)
has someone dealt with a problem like mine before? i would be really thankful for any hints or advices to get my baby back to life, otherwise my old vk2000 will be my companion for the next 6 months (i shiver when i just think of it).
thank you in advance,
Philipp
Have you tried to disassembled, and than reassembled it again?
some times the display flat cable, isnt fuly inside the connector...
there is a possibility that you f*** up the connector, but for determine that we need a macro picture of it.
yes i messed with the connector indeed, but as the pins of the strip were down i thought the black piece wont be of that much importance (i can remember i ****ed one up at a regular mobile yrs ago and it was still working)
can i get that thing back to life if i try to squeeze the 2 black parts (formerly one piece) back in or do you say its over?
thank you for your quick reply btw, i appreciate!
http://content.imagesocket.com/images/conn2d8.png
That is not good. i dont think you can do anything but send it to repair. maybe they can replace the connector.
ok, i will call them and check how much it is and if it is even worth having it repaired... if not, then i have a defective compact for sale :/
shayd, thank you!
Phipo said:
shayd, thank you!
Click to expand...
Click to collapse
No problem at all
this guy has a bricked Charmer. Probably you can talk to him and see if he is willing you sell you the charmer as parts.
Hello everyone! I have problem with my phone because sometimes is turning off without any reason, I bought brand new battery and is still same when is switched off and I want to put it back on i must take off battery for couple of minutes, then put battery back and then switch on anybody know whats happened?? And how to fix it!!
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Thanks for reply!
Uff.... first way to fix it is a little bit too expensive! And 2 way to do it seems quite easy, so i try to do it this way Could you add any picture of this and just tell me how to open this phone?
Many thanks!
@Firestarter42
Thanks man!!!!
did what you said, the plastic trik, and the phone is back to life (it was totally dead and didn't charge) you save a life today!!!
I had the same problem untill one day when he didn`t want to turn on and now i do not know what to do with it how to make it work again
Dear Sir,
I have just tried method 2.
My elf didnt have a metal cover on the processor, lol... got it used from someone... or should I say abused? lol
anyway, I hope it works. will update...
here's a link for the demonstrated tutorial:
http://forum.xda-developers.com/showthread.php?t=476152
Thanks a lot again.
I haved the same problem.....and i realize after many times that I didn't change my ipl and uspl!!!so my cocked rom frequentely turn off my device!!!now it's all right!!!!!!!
i had the same problm too....
it kept turning off and just a few weeks ago it would never turn on...
i did try that trick of keeping the plastic thingy on the omap processor ... it worked for a few weeks max after tht it happened as above
finally took my phone to htc.. told them it was gift and i dont have the invoice... actually purchased frm ebay for 150$ .....
they checked it was in warranty,.. they replaced the board... hurray... my elfin is alive again.. and in wm6.1
hope htc fixes this crap issue as many face this problem
My HTC elf was freezing, rbooting and so on, i was thinking that it was a windows/flash/third party programs problems ....
BUT I confirm that the method "open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it"
brings my htc elf to life again ... stable !
(i've done it with a metal piece and not plastic.)
Thanks for the advice !!!!
my elf was freezing and turning off so i try this 2. method and it works, and elf is much faster then before in my case...
I've never had this problem before but this week my phone switched itself off (so had to boot up again) a couple of times. I did try a new custom rom but I've also been using a different charger (USB mains adaptor) and a replacement battery (this seems to be a poor replacement battery which seems to make up the battery level.
So I don't know what was causing it. For some reason, removing the SD card and re-inserting it seems to have done the trick for now but I'll keep watching it.
Hi guys
My phone is, usually at night when there is no use, switching the screen off, the earphone green indicator flashes but the phone will not turn on when I press the power button, I have to do a soft reset each time to get it back on again (even though it appears to be on with the flashing green light). I cannot get calls or text and my alarm fails to sound. Have overslept a few times now!. Also, its battery has gone for a ball of ^&*%. Will this trick help? Thanks a lot!
Turn off as in literally 'poof!' or, it will restart?
The only way to get it to restart is to do a soft reset, or remove and replace the battery. The phone's green light will flash but there is no way to the screen to activate or use the phone - make calls, use the alarm, receive etc. The screen stays black, no use trying the power button either...
Firestarter42 said:
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Click to expand...
Click to collapse
Thankx your solutions worked out with my HTC Touch and i get replaced omap processor
power problem on Elf (not the usual)
hello guys, i have an Elf T-mobile that someone "lost" i found it, but was bricked...i unbricked following the awesome guides on the forum and installed on it the original italian rom (obviously am not german)
but...here's the problem, when i press the power button (should get it into stand by mode like every pda does) or also when goes on stand by itself, just shuts down !!!
then the pda auto soft resets, until the end...doesn't have the "auto power off problem" like i readed on the forums...however it tried but didn't solve the problem
i think is a problem with the radio, or the IPL or SPL (i tried 1.11.0002 IPL and 1.11.000 SPL...then 2.2x.xxxx IPL and SPL...now i tried 3.14.0002 IPL and 3.14.0000 SPL, also tried different radios...
but the problem remains...
EDIT: Problem solved, changed the little battery in the motherborad, it worked for me
help
Firestarter42 said:
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Click to expand...
Click to collapse
can any one provide some sought of tutorial for this please
thanks
ishaan_chd88 said:
can any one provide some sought of tutorial for this please
thanks
Click to expand...
Click to collapse
I'm presuming you mean for option 2, as 1 is quite obvious
Anyways, I haven't done this, but I am posting my best guess (untried, untested, just a theory).
Open your phone up and completely dissamble as described here. Completely strip it down so you only have your mainboard. Clearly take all the necessary precautions before hand (backup, etc etc.)
When done, you will see there are blank shields above where the chips will be, if you look, you can see little dimples, you can ease these off here. This will get you into where the omap processor is. You can then put the plastic on top, and make sure it is done as described. Should literally be a case of putting it all together and hoping for the best after that. I will have a look at some point (can't promise when) and see if I can take some photos of where this will go etc.
An alternative would be to try and reflow the joints of solder with a heat gun... very dangerous considering how tight the components are packed in, and overkill.
captainstu72 said:
I'm presuming you mean for option 2, as 1 is quite obvious
Anyways, I haven't done this, but I am posting my best guess (untried, untested, just a theory).
Open your phone up and completely dissamble as described here. Completely strip it down so you only have your mainboard. Clearly take all the necessary precautions before hand (backup, etc etc.)
When done, you will see there are blank shields above where the chips will be, if you look, you can see little dimples, you can ease these off here. This will get you into where the omap processor is. You can then put the plastic on top, and make sure it is done as described. Should literally be a case of putting it all together and hoping for the best after that. I will have a look at some point (can't promise when) and see if I can take some photos of where this will go etc.
An alternative would be to try and reflow the joints of solder with a heat gun... very dangerous considering how tight the components are packed in, and overkill.
Click to expand...
Click to collapse
thanks man but i guess am so dumb that am not getting where is this processor located anyways currently my phone is working fine but in few days I'll get the tools & open it...let see than
if you can arrange any pic of processor(where we have to fit plastic) it will be extremely helpful...
anyways thanks for helping
tc
where to get small battery on mother board
Hello
First i would like to mention that i went thru wiki and the forum and i could not find a thread with similar problems.
The problem is in the built in camera (or in the user)
As soon as i turn on the camera to take a picture it doesnt work. On the display the icons are showing like the camera is ready but it is just dark display.
So i pressed the button to capture an image just to see how will the camera react. As i pressed the middle cursor button after some 20-30 second on the display appeared following lines:
Unable to save captured image
unable to get data from camera device.
36003:500:2
I must say that i have problems with the camera module from the very beginning. I was hoping that the latest flash with Tomals SW will improove the camera drivers but this was not the case. Maybe i have to install some additional drivers? I just cant get the bloody camera to work.
Anyone has some idea why my camera does not work?
Besize that my qtek is working just fine.
Thanks 4 the answers.
Best regards from Slowenia.
Peter
Welcome to forums
I had a similar prob and solved changing the ROM
Good luck,
Hello orb3000
Thanks 4 the welcome
i upgraded my rom just 2 days ago with: TML871_WM61_21028_REGULAR_128MB.exe
but it does not change the status of the camera.
so i feel a little helpless
Peter V8 said:
Hello orb3000
Thanks 4 the welcome
i upgraded my rom just 2 days ago with: TML871_WM61_21028_REGULAR_128MB.exe
but it does not change the status of the camera.
so i feel a little helpless
Click to expand...
Click to collapse
Try another ROM, just in case. Generally a factory ROM would give a good indication of whether there is a problem and eliminate other possibilities. So I would recommend flashing it just for your peace of mind.
As far as Tomal's ROM is concerned, provided your device is 128Mb and ROM functions as it should otherwise, one of the reasons for non-working camera is the module itself or the mainboard. Hopefully its the camera module, as they are relatively cheap and very easy to replace and no special knowledge is required, as well as minimal device intrusion, so you will be able to replace it yourself. I think i saw the camera module at some of my suppliers, let me check if still available, alternatively, a working second hand part can also be used, I might have one in my toy box somewhere.
Thank you so much. I will yet again update the rom and than i will report how it went. So if it doesnt work, i would be happy to purchase a camera module from you. Replacing it will not be a problem as i have no problem with the mechanics and electronics in general :-D:-D:-D
I also stumbled upon a DIY side in this forum, regarding the universal.
So which rom would you recommend me?
Thanks
:-D:-D
Peter V8 said:
Thank you so much. I will yet again update the rom and than i will report how it went. So if it doesnt work, i would be happy to purchase a camera module from you. Replacing it will not be a problem as i have no problem with the mechanics and electronics in general :-D:-D:-D
I also stumbled upon a DIY side in this forum, regarding the universal.
So which rom would you recommend me?
Thanks
:-D:-D
Click to expand...
Click to collapse
Factory ROM is the ROM your device came with originally, out of the box.
Peter V8 said:
So which rom would you recommend me?
Click to expand...
Click to collapse
WM 5... as Uni came in with WM 5.... so in my case JASJAR.. and T-Mobile rom... is factory default for my 2 uni....
That could be a problem.
i have been given the qtek 9000 by my boss as he bought himself a tuch diamond pro and he gave me the qtek becouse he knew that i was so enthused about it. :-D:-D
Sadly the PDa came without any CD so factory rom is out of question. He somehow lost the CD so all i had was the phone, the usb cable and the charging unit.
try the wiki first!
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
Otherwise, someone may have it. (I've got SPV M5000 if you're interested)
The wiki has only the country or operator specific downloads. Since i`m from Slovenia there is no operator or SW for our operator on the list.
So i probably need an english version since the qtek in our country c<me only in english version.
Just get WWE for QTEK, or try other WWE ROMs. BUT make sure you have the Slovenian settings on a .CAB or check if they can be sent by your provider.
Peter V8, don't forget to update the wiki if you find what you were looking for... and it wasn't in the wiki. 30 people will (not) thank you, but appreciate it.
As soon as i find the problem i will update it to wiki no problem. If the camera is broken and it need to be replaced i will document the procedure with photos that i will take during the "operation".
Sadly my battery bloated a little bit (no chemical spill so far ) and i took it out of my qtek to protect it from damage. So now i am stuck with nokia N90 until the new Battery arrives that i ordered. So when i will have the new accu i will find the error that the camera is having and report it to wiki and forum.
Peter V8 said:
As soon as i find the problem i will update it to wiki no problem. If the camera is broken and it need to be replaced i will document the procedure with photos that i will take during the "operation".
Sadly my battery bloated a little bit (no chemical spill so far ) and i took it out of my qtek to protect it from damage. So now i am stuck with nokia N90 until the new Battery arrives that i ordered. So when i will have the new accu i will find the error that the camera is having and report it to wiki and forum.
Click to expand...
Click to collapse
A battery 'bloated a little bit' means it got wet, which might mean liquid damage to your device and the reason your camera might not work. Even if you replace the battery at this stage, if the main PCB got wet, it will corrode and your device will die, slowly, but surely.
I am fully aware of this problem, but the new battery bloated (i replaced it 3 months ago) and the camera doesnt work since i have the qtek (1,5 year). The little white paper stripe under the sim card holder didnt turn pink and also the battery isnt wett also the phone is not wett. Well we will see when i get the new battery. It is under warranty so if the battery damaged my beloved phone, the company that sold me the new battery 3 months ago will not get so easy of it. Here in Slovenia a well preserved qtek 9000 still costs arround 250-300 Euros.
A little update:
I bought myself a newer working qtek 9000 with partialy broken LCD for 30 Euros. So i placed the battery into my qtek and it works perfectly. Apart from that i am still waiting for my brand new battery to arrive from germany. So i fully charged the spare battery, did a DOC reset and flashed the qtek with Tomals ROM.
The camera however still doesnt work, so it is not a SW problem. Since i have bought the broken qtek 9000 for spare parts, i will take the camera out and replace it. So probably this weekend i will do the "service" and i will take pictures of the procedure and update the forum.
Peter V8 I also face a similar problem since my 2 days Ebay bought 02 Xda Exec's camera is full of white, red, green dots either in photo or video mode. Changing roms didn't help at all and its truly a pity since the phone seems like it came straight from the factory, although used. My dilemma is either paying about 20 Euros to ship it back or waiting for your endeavor to complete but since I overall truly like the phone I will wait and see
Peter V8 said:
A little update:
I bought myself a newer working qtek 9000 with partialy broken LCD for 30 Euros. So i placed the battery into my qtek and it works perfectly. Apart from that i am still waiting for my brand new battery to arrive from germany. So i fully charged the spare battery, did a DOC reset and flashed the qtek with Tomals ROM.
The camera however still doesnt work, so it is not a SW problem. Since i have bought the broken qtek 9000 for spare parts, i will take the camera out and replace it. So probably this weekend i will do the "service" and i will take pictures of the procedure and update the forum.
Click to expand...
Click to collapse
There is really no procedure worthy of taking pictures, once you remove the back, remove the large white antenna part and you will see where camera clips in. It's a fairly straightforward flex clip connection.
Little update again.
As i mentioned earlyer, i have bought myself another spare parts uni with broken tft. Ok so first.....i took apart both unis (didnt took no pictures becouse the pdf DIY to disassemble and assemble the UNi is more than helpfull, so you have to be a complete non technical type of human, or you have cerebrall palsy, or you must be a dee tii deee to not understand or grasp how it is made) and puted the tft from my uni in to the spare part uni. It worked perfectly and it had WM 5,0 the original. So the camera worked , everything worked-sim card....everything. So yesterday i flashed the uni with Tomals last ROM (Tommal the rom is working perfectly on my other uni so the SW is just fine) And somehow the uni had problems to work when my SIM card was inserted. So i removed the sim card and the uni worked perfectly. I dont know wath the problem is (probably a sim lock or somethin, but odd enough it worked with WM 5,0) so as the forum was down yesterday, i just dissasembled both unis again, putted the tft back in to my uni and putted the camera which worked just fine in the spare parts uni, in to my uni. And guess what.............the camera is still not working. I have done the hardreset but still.........even as i replaced the camera i still have the mesage......unable to get data from camera bla bla bla.....error 36003:500:2
So there might be a problem with some drivers or something in that way. I am pretty on the end with my knowledge now. How can i find the erorr or the couse of it???
If someone knows i would be very happy uni user :-D
So the problem is still not solved. Otherwise the uni is working perfectly only the camera gives me hard time.
Best regards
Peter
Peter V8 said:
If someone knows i would be very happy uni user :-D
So the problem is still not solved. Otherwise the uni is working perfectly only the camera gives me hard time.
Click to expand...
Click to collapse
seems like the problem is with motherboard rather than the camera...
hey guys!
i really like you´re forum, it was helping me several times...
now i need you´re help again.
I think you will easily recognize that i have a bad problem with
my hermes - if you look at the attached pics.
The touchscreen is working, the device is booting too and is working nice...
but, uhm, well - i don´t know how to fix the problem shown in the pic.
I´d be really grateful if you can solve my problem.
I don´t know what to do, i just disambled it and cleand everything, i tried an hardreset... the problem´s still there. =(
Regards
We'll see what others think, but looking at picture 3, I'd say your LCD is cracked and the the liquid crystal seeping out a little under te digitizer layer. If I'm correct there is only one practical solution and that is a digitizer LCD combo replacement.
If you replace it be very careful to replace it with the correct one - Hermes had at least three different types and it is essential to get like-for-like.
There is a thread here about the different types.
Mike
One way to check if it's a crack is to place some pressure with your finger along that diagonal line - if you see odd colors moving around in a "liquid" way then it is pretty certainly cracked.
Ouch, i also think that, that is a crack.. Did you drop your device or something.? I think you really need to replace your display..
first of all: thx for the fast responses
i tried what you suggested to check if it´s cracked... unfortunately you´re right
i think a replacement would be too much efford and it also would be too expensive and risky... so i think i gonna buy a new pda... htc of course ;-)
thx to you all
softonic
Helllo guys...i have more problem with my Pro 3 like CDLA only after restart ... quick charge problem...and so..
but now i have problem with main mic... i must "lick" my phone when i want to somebody on next side listen me..very very low ... when i test sound recorder and this use camera mic ist always ok...
I think that problem ist maybe some setting or soft becouse when I call with somebody i listen me from my speker..and second side listen me only when i kiss my phone and shouting....i tryed flash new rom...6,0..7,1 but problem is always...
I found only Enginee mode and there is Mic settings..some value..but this ist possible only for MTK... and for snapdragon nothing?
Maybe i must make somethink like he https://www.youtube.com/watch?v=ihpeowj73XI .... but i am amateur..it is posible on Leeco Le pro 3?
Hello, I have the same Phone with the same Microphone Problem, have you solved it?
Mic problem
Cyber Spawn 333 said:
Hello, I have the same Phone with the same Microphone Problem, have you solved it?
Click to expand...
Click to collapse
Had the same on my Le Pro 3 after a dive in my swimming pool
I solved this problem by changing the whole board module, it contains the 2 mics (multimedia+phone) + charging port.
If you want to do it, you certainly have to buy a new screen also and have desoldering 2 wires from the speaker and resoldering back on the new board.
Here is the board I bought:
https://www.aliexpress.com/item/For...034.html?spm=a2g0s.9042311.0.0.48d74c4dxSCKI8
You'll find a lot of different displays at different prices too.
Good luck
raymanfr said:
Had the same on my Le Pro 3 after a dive in my swimming pool
I solved this problem by changing the whole board module, it contains the 2 mics (multimedia+phone) + charging port.
If you want to do it, you certainly have to buy a new screen also and have desoldering 2 wires from the speaker and resoldering back on the new board.
Here is the board I bought:
https://www.aliexpress.com/item/For...034.html?spm=a2g0s.9042311.0.0.48d74c4dxSCKI8
You'll find a lot of different displays at different prices too.
Good luck
Click to expand...
Click to collapse
Hello, i have such problem
https://forum.xda-developers.com/le-pro3/help/le-pro-3-x720-microphone-doesnt-calls-t3867413
What do you recommend me do to? To buy new board (the one you showed) would fix the issue?
i just dont understand the part "buying new screen" . My screen works totaly fine, why do we need to change? Can we not put it back by a special glue (for screens) ?
Thanks in advance
SUMMERBREEZE said:
Hello, i have such problem
https://forum.xda-developers.com/le-pro3/help/le-pro-3-x720-microphone-doesnt-calls-t3867413
What do you recommend me do to? To buy new board (the one you showed) would fix the issue?
i just dont understand the part "buying new screen" . My screen works totaly fine, why do we need to change? Can we not put it back by a special glue (for screens) ?
Thanks in advance
Click to expand...
Click to collapse
Hi,
Sorry for your phone, it's hard to say it's related to the mic board because it's working after the reboot... but maybe it's a question of temperature... for the money that this board costs, you can give a try.
Now, why the screen? because I'm quite sure that when you will remove your screen, you'll damage it. Or I'm really bad for that I opened it two times and broke it two times :laugh: I also bought a B7000 special glue.
I hope you'll find a fully working phone soon.
Ray
raymanfr said:
Hi,
Sorry for your phone, it's hard to say it's related to the mic board because it's working after the reboot... but maybe it's a question of temperature... for the money that this board costs, you can give a try.
Now, why the screen? because I'm quite sure that when you will remove your screen, you'll damage it. Or I'm really bad for that I opened it two times and broke it two times :laugh: I also bought a B7000 special glue.
I hope you'll find a fully working phone soon.
Ray
Click to expand...
Click to collapse
You are right, the only way to successfully remove the screen is carefully with a Heat gun. But long enough that the screen will fall off, when you tilt it to the side. The heat shield will also have residual glue.