Related
Hi,
Ok after the breakthrough regarding the ROM updates for QTEK 1010 and it was first revealed here on xda-develpers.com we have some new options in the QTEK now one of them is the WM.
Did anyone manage to use the Wireless Modem via IRDA because its not working the first thing is that the computer is seeing the device on infrared but not as a modem and i dont have an *.inf file to indentify it. If anyone managed to use his QTEK or any XDA via infrared to connect his laptop to the internet using GPRS plz explain how.
thanks
to irda on win2k/xp
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Ummm its a good idea but i am not sure if this will work on Windows XP... what do you think?
it does
it does, but as with all things apply with care
Tried it
I tried this a long time ago, IRCOMM2k works on XP but the problem is that i couldn't figure out how to setup a IR generic Modem working on that port.
Yes please, this is a good article,
I installed the ircomm2k on my XP, but how to configure the connection from my laptop to connect to the internet via my XDA PDA as an external modem?
to setup xda as a modem
1. Install Ircomm. note which com port is assigned as permanent.
2. Add new modem: standard 33600
3. Select com port from item 1 as the com port of choice
4. Edit modem profile in devices settings, in Extra Initialisation Commands add AT+CGDCONT=1,"IP","apn name"
5. VERY IMPORTANT: set flow control to OFF
6. Set port speed to 115200 ONLY
Set up a Mobile Web net connection as per your operator
Select your above modem
Align xda with irda port; select start on Wmodem app
Double click Mobile Web connection.
Surf. It's OK but not as fast as a GPRS card.
OR you can wait for O2 to eventually post some instructions...
Thank you very much for your feedback
I did all what you asked me to do, but its not working it gave me an error message:
Error 692: There was a hardware failure in the modem (or other connecting device).
I replaced AT+CGDCONT=1,"IP","apn name" BY AT+CGDCONT=1,"IP","apn01" same as Im using in my PDA. Am I right?
Something I didn't understand in your reply:
(Set up a Mobile Web net connection), you mean a normal dial-up connection?
One more thing, what do you mean by (select start on Wmodem app)?
Do I have to do anything in my PDA before I connect from my laptop? or do I have to do anything in my PDA configuration or connections settings?
Please help me, I want to use the Gprs on my laptop, no need to pay for 2 services, one for the PDA and other for my laptop
Best regards, Ali Alsaffar [email protected]
"select start on Wmodem app" - this means go into the Wireless Modem application on the xda, select IrDA (if thats now you are connecting) and then tap the Start button.
When you've done that, go the the DUN connection on laptop and connect as you normally do.
Unfortunatly I dont have "Wireless Modem application" on my XDA from where I can get it?
I thought the command was:
AT+CGDCONT=1,"IP","apn name","",0,0
I don't know about the command but what Im sure about it is that wModem application is mandatory, so from where I can get it?
Re: to irda on win2k/xp
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
From: Helpdesk (source O2) Sent: 30 May 2003 13:54
Subject: RE: wireless modem
Hi
The wireless modem will be available in the next ROM update from the xda team. I understand that this will be released in the next couple weeks - they are in the final stages of testing.
We will highlight the new ROM on our homepage with a link to the downloadable files.
regards
source O2
Re: to irda on win2k/xp
Anonymous said:
guest said:
visit http://www.ircomm2k.de
Install software at own risk, but this exposes a permanent COM port using IrDA. Also nukes Wireless Link in the process.
Setup a manual modem, select the COM port from above, presto!
Click to expand...
Click to collapse
HI. I HAVE AN OLDISH LAPTOP RUNNING WIN ME. WILL IRCOMM2K WORK ON ME OR IS IT INTENDED (AS NAMED) FOR WIN 2K AND XP ONLY?
Click to expand...
Click to collapse
Hmm... really good question. ME is an update to 98 as I recall, but a clunky upgrade.
Way to check: Setup a new modem. When it asks which COM port you wish to use, if you can select Virtual Infrared COM port then it should work fine.
Get the instructions at www.o2.co.uk/xda on Help and Support.
Anyone know what the T-Mobile USA network connections for using WModem are?
For UK O2 they are:
Primary DNS - 193.113.200.200
Alternate DNS - 193.113.200.201
User name - O2Web
Password - password
Has anyone used wmodem in the US with T-Mobile as a service provider?
Thanks,
JP
Qtek as wireless modem
I also have oldish ME Laptop computer. I did exactly as described on O2 support site. It does not work. The modem on laptop immediately disconnects saying it's not responding properly.
I have tried several cooked versions of the 4..00.16 Eng T-Moble and the 4.00.11 ENG WM2003 roms and niether one installs the WModem app. Any ideas why?
I have a T-Mobile version of the PPC, radio stack 6.24
WM with old laptop computer
It worked for me. I could connect my oldish ME notebook computer to internet over gprs using WM in xda. I used the extra string from o2 and just changed the access point name.
It goes as this:
AT+CGDCONT=1,"IP","apn"
It works, but the WM just stops responding the moment you disconnect the connection from PC. The PC waits and waits for the confirmation and then hangs up saying no reponse. But as long as you are connected it works very well.
Using GPRS/EDGE as a Modem to access internet with Desktop/ Notebook Computer
When I need to connect my Notebook to the internet, I always prefer Wifi or Broadband line. If no such medium to connect internet, I will use PDA and USB cable. First of all, you need a modem driver for Windows 2000/XP and a simple dial-up utility. Both files are available here: USB Modem. It is a zip file and has 2 files, (1) USBMDM.INF, (2) USBModem_Dialer.exe. Just download them and unpack to you Desktop/Notebook. Second, you must set the partnership to your Desktop/Notebook first before proceed following set up.
Go to program and run “Modem Link” and set the connection type. In this case, choose USB and APN and tap on the Activate button (In my example, APN is Peoples.net). The device has switched to the modem mode and is ready to connect.
Photo 1 -3
At the moment you connect the PDA to a desktop or notebook over USB cable, the computer will connect the PDA. Let the system work until you see the Photo 4, select third options as red arrow, click Next.
In the next dialogue Photo 5, you can see that the new device is called HTC USB Modem. Even though the system offers to do this for you, you'd better select the second option as red arrow to be able to select location of the driver manually.
In the next dialogue Photo 6, choose the folder where you have unpacked USBMDM.INF from there archive and click Next to continue. The system will be working and configuring for a while. If no problems occur, you have installed the modem successfully.
Go to your desktop/notebook, double click USBModem_Dialer.exe that is part of the zip file you had previously unpacked. (Photo 7) As you see the APN must same as PDA one. (In my example, APN is Peoples.net) Click Dial.
Done. You can surf internet with you desktop/notebook.
Important : The key of this setting is that the APN for PDA and Notebook/Desktop must be same. The name of APN which you can ask the services provider.
Please note that all photo is not mine but I tested on my 818pro & Wizard and Notebook and work fine
Great info! I use my qtek9100 and T-mobileGPRS every day for this purpose. Only thing that is different is that I use the standard Dailup Networking of XP. You don't need to specify a APN but you have to fill in a number to Dial: *99#
I tried the above on my O2 XDA Atom and it didnt work, first in the PDA I was unable to select th APN (the dropdown list was empty). second thing is on my laptop when i tried to select the USBMDM.INF the laptop rejected it as unfit for the hardware.
help.
Hi all.
I'm not able to enter the APN number in my Dopod 818 Pro too. Any ideas how?
this is what i did on my O2 mini:
i. Installed USB Modem dialer on my notebook.
ii. Before connecting the PDA: Disable allow USB and allow Network checkboxes on Microsoft ActiveSync Connection Setting.
iii. Go to Task Manager on the Notebook. Disable all WCExxx processes.
iv. Create Dialup Connection as you create for normal dial up phone connection: No username or password: Dial up no *99#
v. In your PDA, Open Wireless Modem: Click at Start.
vi. Connect your PDA to notebook using USB cable.
vii. Changed modem properties at dial up connection to HTC modem.
viii. Proceed with dial up.
so far it works for me...
pls help
the device already switched to modem mode and connect to decktop,
but the desktop cannot detect to 838pro.nothing detect new device.
and how to setting the partnership to your Desktop/Notebook first .
thankyou very much
fix apn
mcmug said:
Hi all.
I'm not able to enter the APN number in my Dopod 818 Pro too. Any ideas how?
Click to expand...
Click to collapse
hi,
u will not be able to change apn anyways.u can only see it.
1st u should setup to access gprs internet on your ppc. this u do by going to
start>settings>connections>add a new modem connection, under select modem, cellular line gprs, next, now enter access point name as given by ur gprs service provider [mine is airtelgprs.com, gprs provider being airtel bengalooru] ,next, username and password as given by ur gprs provider [mine is leave both blank] , finish.
now go to modem link in start, programs, u can see ur apn as u entered.
if u still cannot see, go to start,settings, connections, connections, advanced, select networks, under programs that connect to internet, select the name of gprs u entered in above steps.
now u can goback and see in modem link.
now without activating modem link, browse internet in ppc only to c if all is right with ur gprs. if sucessful, then close pocket ie, activate modem link, connect to desktop or laptop via usb cable, use usb modem dialer or create other connection with no. as *99#[which is better, since in usb modem dialer, u cannot save apn, have to retype everytime]
any problemo in setting up gprs connection in ppc , contact ur gprs provider for settings. make sure gprs works in ppc b4 u setup to work in desktop.
alternate methods to use wizard as modem would be to use bluetooth DUN, or try pdanet 1.7
I don't find any variations in speed in any methods, all r as gud or as bad.
after hard reset,i can connect to devicve.
when dial to connet to internet ,snow "remote access error 797"
pls help
thanks
my PPC (XDA Stealth) is already in GPRS/Modem mode. when i connect it to my laptop using the sync cable, my laptop automatically installed its drivers. it didn't ask me to specify which driver to install. when i run HTC USB Modem, it says No USB Modem.
hi..I hav everything installed properly n it was workin earlier n now when I try to dial up the connection, it says hardware failure of modem...when tried pdanet it always says modem busy...pls help...
any way to do this with a G4 ibook?
EDIT: Nevermind... I found it... it is working great with my 6945 iPAQ via Bluetooth, for free! If someone wants to check this, look over Here
Sorry i posted to the wrong thread.
WM6 HTC Tytn usb modem settings
Hi, in WM6 there is no Wireless modem icon and settings.
Modem is HTC USB Sync, not USB modem.
What can I do?
Thanks
Start internet sharing on the tytn and chose usb and then connect to your pc with usb cabel and thats it
sas90850 said:
... new device is called HTC USB Modem. Even though the system offers to do this for you, you'd better select the second option as red arrow to be able to select location of the driver manually.
In the next dialogue Photo 6, choose the folder where you have unpacked USBMDM.INF from there archive and click Next to continue. The system will be working and configuring for a while. If no problems occur, you have installed the modem successfully.
Click to expand...
Click to collapse
My XDA Atom is detected as a 'Windows USB Modem' rather than 'HTC USB modem' and the driver in the zip is not compatible with my device. Can anyone place the link to the driver file for XDA atom into this topic?
Is there any posibility to connect using HSDPA?
Because the subject specifically mentioned GPRS/EDGE ...
Thanks
I was searching for this solution some hours now...
Great fix!
Great!
Thanx!
Suberly simple and works perfectly!
Regards
wm6 sharing not as a modem, it sharing as a sharing device. i alos finding the driver.. but if you have install active sync b4, i can auto find a driver. but the driver how can i capture out? becuase if i connect to other notebook, it also ask me to install the driver
Still having trouble connecting
AndreyC said:
My XDA Atom is detected as a 'Windows USB Modem' rather than 'HTC USB modem' and the driver in the zip is not compatible with my device. Can anyone place the link to the driver file for XDA atom into this topic?
Click to expand...
Click to collapse
I have an AT&T/Cingular 8525
I'm still having trouble. I connect the USB cable (after selecting connect onthe Internet Sharing). When I go through the process and select the .inf file, my PC (running WinXP) says that the "file contains no info for the device". What's going on with that?
I've searched all over the net and downloaded the USBMDM.INF file from 100 different places (thinking they were just corrupt files) but to no avail.
Someone help, please!
I am trying to setup my T-mobile MDA as a modem. I would like to be able to use it as a USB or Infared modem. Can someone point me in the direction on detailed instructions of how to do this so I can get internet through my phone on my computer? Thanks for your time.
Hope this helps
Here is what works for me
====
Not sure if these will be spefic for your device, I called T-Mobile to get all the settings the guy guided me though everything.
---
To get instructions and get to Drivers-----
Insert the CD that came with the MDA and Explore the cd, on the cd open the folder OEM>APPS>Drivers>USB Modem> this is where you will find the drivers and instructions
open the word document inside and that should give you some instructions for your device
After you do all the installation you will need to go to Control panel>Phone and modem options(on your PC), then go to the modems tab double click the HTC USB Modem then the Advanced tab in the Extra initialization commands box put in
AT+cgdcont=1,"IP","wap.voicestream.com","",0,0
And then to test the connection you must have the MDA pluged into the computer then on the MDA go to Start>Programs>Modem Link, then Activate. All of my settings in Modem link are
Connection is: USB
Baud rate is: Unused
Access point name is: wap.voicestream.com
Hope everything on here works for you![/url]
Thanks
Terran
Do I need to buy tzone or GPRS from Tmobile to MDA as modem
Do I need to buy any particular service tzones, tzones pro, gprs from Tmobile to access internet on my laptop from MDA as a modem.
I have successfully connected with the Qtek 9100 AKU2 ROM (the latest stable ROM for HTC Wizard) to Cingular via Bluetooth and Mac OS X 10.4.6. Instructions:
1. Pair OSX and the phone. You might need to check the "any device" checkbox on OSX's pairing utility.
2. Verify to OSX that you do want to use that device as a modem (if you don't get that dialog, then you will need to create the Bluetooth connection yourself -- message me or leave a comment if you need instructions and I will reply to you).
3. RENAME the attached iPAQ-GSM.txt to plain iPAQ-GSM (remove the .txt extention using the Finder 'Get Info' dialog). Copy the file "iPaq-GSM" to your /Library/Modem Scripts/ folder. I modified the original script that was floating on the internet for a year now in order to work with Cingular (the original script wouldn't get a carrier signal with my phone -- it needed some small initialization changes).
4. Go to your System Preferences/Network/Bluetooth/. There enter the following:
Service Provider: Cingular
Account Name: [email protected] (case sensitive)
Password: CINGULAR1 (case sensitive)
Tel number: *99# (the *99***1# number that does work with other phones doesn't work with the HTC Wizard)
On PPP options uncheck "tcp header compression".
On the Modem tab uncheck both "enable error correction" and "wait for dial tone". From the modem drop-down menu select the iPaq-GSM modem script.
Then, click Apply and then open the "Internet Connect" application and select Bluetooth from there. Click "Connect" and you should now be connected on the net via Cingular GPRS/EDGE.
Alternatively, you can create a new networking bluetooth connection instead of using the generic bluetooth networking pref panel, but that involves a bit more work -- although I personally prefer it as I have over 8 phones and I need different networking connection names and settings for each, instead of using the default "Bluetooth" one. If you are on the same boat, IM me or leave a comment for more instructions.
Thanks
dude you just made my day. It works perfectly. Thank God for people smarter then me.
Unfortunately, in my AKU2 QTek ROM, the PPP server dies right after I disconnect from the Mac. I have to reboot the PocketPC before I can reconnect my Mac to GPRS.
If anyone knows more, please download the script above and tell us if there is a way to fix this.
more mac users
hey guys,
just wondering if you've been able to sync your MDA(Wizard) to your mac. and if so, how? also, any luck updating ROMS without a PC?
whalien
I have a VX6900 that was Flashed to Cricket, I have GPSViewer, Google maps, HTC GPS tool, & Quick GPS. each one see that i have a GPS card but I have never gotten a lock on, I have followed many treads, but I still can't get the GPS to work on my phone. please Help
try gps toggle
my sister flashed her sprint version of the touch to cricket and she uses gps toggle to turn on/off the gps receiver. i suggest that you only have google maps and gps toggle installed, and nothing else. give it a try and let me know if it worked out for you!
good luck
I've been told that nothing i do will enable my GPS because it was flashed wrong
wakko69 said:
I have a VX6900 that was Flashed to Cricket, I have GPSViewer, Google maps, HTC GPS tool, & Quick GPS. each one see that i have a GPS card but I have never gotten a lock on, I have followed many treads, but I still can't get the GPS to work on my phone. please Help
Click to expand...
Click to collapse
I also have mine flashed to Cricket. I have never got a GPS lock on mine...
So anyone have any ideas??
did you get GPS working
Did you get GPS working with your cricket ROM If not let me know I can help you.
Please post anyway how to get GPS working with a Cricket ROM.. Also, do you or does anyone have suggestions for a Cricket ROM having just a stock Sprint Touch? Thanks in advance.
phigan said:
Please post anyway how to get GPS working with a Cricket ROM.. Also, do you or does anyone have suggestions for a Cricket ROM having just a stock Sprint Touch? Thanks in advance.
Click to expand...
Click to collapse
I will post you a nice tutorial tomorrow for the GPS and if you PM or post your email I will send you one of my cricket custom ROMS for the touch.
cricket ROM and tutorial
I have included a custom ROM in this tutorial
1st off credit is due to those that wrote these programs I only take credit for putting this all together.
#1 use msl grabber to get the msl/spc code found here
http://forum.ppcgeeks.com/showthread.php?t=43560
install via activesync or sd card and run on ppc.
#2 unlock with the 2.31 unlocker listed here
http://forum.ppcgeeks.com/showthread.php?t=20370
#3 flash this sprint 6.1 ROM to update radio "WARNING DO NOT LET CUSTOMIZATION RUN" SOFT RESET WHEN IT SAYS AUTO CUSTUMIZATION IN 3 SECONDS. This is for GPS1 to work.
http://www.htc.com/us/SupportDownloa...cat=2&dl_id=66
To do this connect USB to computer then Press power camera and Reset to get to bootloader red green yellow screen and connect to cable then run the exe file. DO NOT LET CUSTOMIZATION RUN SOFT RESET WHEN IT SAYS CUSTOMIZE IN 3 SECONDS.
#4 Go to the following and download from windows drivers and unlocking tools
http://www.4shared.com/dir/13898363/...4/sharing.html
QPST
windows htc driver
activesync4.5
Ryanmogul diagnostics shortcuts
download the following
http://www.4shared.com/file/10597370...HMregedit.html
http://www.4shared.com/file/94425441...t5_0_31_7.html
Install Ryans diagnostics on ppc
Install QPST on computer
Install htc drivers on computer
Put phone into diag mode & connect to computer. computer should connect and find new device
run QPST configururation and add new port till you find your phone.
Now in QPST run from top menu start clients service programing.
Select phone
Read from phone imput spc/msl code from the grabber.
Then enter 000000 in the service programing field.
Write to phone
now while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 117.29.223.11
pde port # 8080
pde transport IP
Position calculation mobile
Write to phone
close out
I would recommend now to flash a custom ROM here is a link to one of mine. http://www.4shared.com/file/135174580/27254c16/VOGUIMG.htmlinstall on a FAT32 formated 2gig or less msd card and rename to VOGUIMG.NBH THEN INSERT CARD AND PUT PHONE INTO BOOT LOADER AND FOLLOW INSTRUCTIONS.
You will need a cricket PRL to load through PST setting.
then go to this thread it will help you set up your pst setting correctly.
http://forum.xda-developers.com/showthread.php?t=492824 *NOTE* In some cricket markets you will need to change from EVRC to VOICE 13K to make outgoing calls. YOU CAN ALSO DOWNLOAD THE MMS CAB FROM HERE and then
Install the cricketwapmms cab
Do not try to open a data connection untill you have cricket service on the phone.
To authinticate your user name 10digit#@mycricket.com
you must have service.
Just a couple notes to have Email and push services work you MUST have the $15.00 HTML plan on your account and your phone must be listed in the system as a QA4 Evoke.
GPS may Require priming unless you use Ryans Googlemaps.cab
Credits go to ImCokeMaN for the unlocker and his great tutorial
and Ryanmogul6800 on XDA for his great software and his perfect PST setting.
Please let me know if this helped any or if I can be of any further assistance.
__________________
My GPS is working, But I had help there a guy in omaha that did it and it's running nice.
Good glad you got it running Also if you wanted push email to work there is a program called funambol that works ok with cricket.
hi i am tryin to get the gps running using your fix but all of the links are not working when i click on them but just to tell you what im working with i have the sprint vogue flashed to cricket and im running the new nsfan wm6.5 v16 rom and when i try gps viewer i cant find a fix, so is it the rom maybe cause my radio is 3.42.50....so can you point me in the right direction cause my phone is amazing but the gps is a setback and this is something that i really want spent weeks looking for something so thanks for all of your help
I apologize for that I don't know why they don't work here is the GPS1 setting that need to be entered in QPST. Your radio version is good to go for GPS.
while in QPST lets get your GPSone ste up for cricket.
Go to the GPS1 tab and uncheck all the boxes then recheck them.
then enter the following
pde ip address 117.29.223.11
pde port # 8080
pde transport IP
Position calculation mobile
Write to phone
It looks like you have a good rom to be using so most of the links you don't really need.
Links you may need are below and they do work I just checked.
QPST http://www.4shared.com/file/101893747/6958b637/QPST_v27_Build_301.html
HTC driver http://www.4shared.com/file/101893703/a59b72a/WindowsHTCdrivers.html
Diagnostics shortcuts http://www.4shared.com/file/101893721/d661b484/RyanMogul_Diagnostic_Program_Shortcuts.html
thanks so much u will try it now and get back to you