Hi all,
I lost my XPERIA password and I have too many file on it, I can answer any income call, but I can not use of my divace
I had Tytn II before and I can back it when I lost password but with XPERIA I don't know what can I do, Please hellllllppppppppppp MeEeE
remove the microSD...back it up and Hard Reset the phone
if the files are on SD follow as above, if you have them on your Phone itself try itsutils to dump your complette rom !
then put it in kitchen unpack everything and voila the files should be there
EDIT: here the link how to back up your rom
http://forum.xda-developers.com/showthread.php?t=462926
if files on SD grad sd out of your X1 and hardreset it or just flash ROM again / do SEUS update
Greets
Thankssssss
Hi Guys,
thanks about your prompt reply, Great way, I did and now I have my phone again.
Thanks a lot
Just admit you stole/found someone's phone.
??
what did you mean?
orelsi said:
Just admit you stole/found someone's phone.
Click to expand...
Click to collapse
why would he care about the files then? hard reset is enough! bad things happen
anaadoul said:
why would he care about the files then? hard reset is enough! bad things happen
Click to expand...
Click to collapse
Related
hello guys,
im kinda frustrating here..
my atom exec runs not smoothly lately..i've tried to un-install programs from my device but still its doesnt run smoothly like before..
i'm planning to re-install my WM5 and install a new one on my device, can i do that with simple steps like any other Desktop computer usually have??
one more thing, i have a thought about what causing my problem..there's a file name MN1Ril.txt in my device's root and i noticed that it kept eating up my internal memory slowly..now, its size is 52mb and keep getting bigger everytime i see it..
do u guys know what it is? i try to remove it but everytime i try to remove it, it said that it has a sharing violation..i dont know what that means..
please help me..
i'm planning to re-install my WM5 and install a new one on my device, can i do that with simple steps like any other Desktop computer usually have??
Click to expand...
Click to collapse
What does that mean, if you're refering to the flash procedure, just connect to A/S and execute the DSUU of your choice, or depending on your bootloader put the device into bootloader mode then flash.
one more thing, i have a thought about what causing my problem..there's a file name MN1Ril.txt in my device's root and i noticed that it kept eating up my internal memory slowly..now, its size is 52mb and keep getting bigger everytime i see it..
Click to expand...
Click to collapse
A 52MB txt file? are you sure? if you put your Atom Exec into bootloader mode (camera+reset) what is the version..eg. MN1? or MN2?
yes, it has size over 52mb..its extention is .txt..it is a virus or something? i try to delete it but i cant do it coz it said sharing violation..
i want to re-install my WM5, im a newbie and i really dont know any procedures like u said..
i have un-install all of the programs in my device, and i try to delete it in safe mode but still cant do it..
is it a virus or something coz last time i saw it, its size is 52mb from 49mb..
i want to post a screenshot but i dont have a program that can do a screenshot on my device..
perhaps its better if i re-install my WM5, dont you think so?
Ever trying the hard reset? pls backup yg personal data and fav applications first before perform the hard reset.
nope, i havent try to hard reset it..how do i do that?? ( sorry im a newbie )
is it going to solve my problem? i mean, is it going to remove that file?
does anyone know how to remove that file? coz its killing me..
now my device runs more slowly than before..i hate it!
is there any program/application that can erase or perhaps give me an information about that file and which program or apps that use that file?
quicksilverye said:
nope, i havent try to hard reset it..how do i do that?? ( sorry im a newbie )
is it going to solve my problem? i mean, is it going to remove that file?
does anyone know how to remove that file? coz its killing me..
now my device runs more slowly than before..i hate it!
is there any program/application that can erase or perhaps give me an information about that file and which program or apps that use that file?
Click to expand...
Click to collapse
Since you are a newbie, I suggest you read the XDA Atom wiki. It will answer most of your questions.
Hi. i am new user xperia. Does someone tell me how can i do hard reset my phone . I need key combinations. Thanks for help
wyder69 said:
Hi. i am new user xperia. Does someone tell me how can i do hard reset my phone . I need key combinations. Thanks for help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=437607
You can also simply go to settings>system>Clear storage
jvs60 said:
You can also simply go to settings>system>Clear storage
Click to expand...
Click to collapse
That's actually not the same as a hard reset. As it's run from within windows mobile, some files tend to be left behind (files that are in use at the time, at least). Best is still to hard reset from phone start.
RTF WIKI
Could any kind person post me or email me a copy of BTtrayCE for TP2 as I accidentaly deleted mine and now I can't use Bluetooth.
Info of the file path would also be appreciated.
Thanks in advance.
File attached
Hi clark97
That's wierd because normally if you delete a file in the ROM you just soft reset and it appears back.
Cheers
andrew-in-woking
Cheers , read in another post its because I installed tom tom 7.450 which overwrote it, for some reason a soft reset isn't enough and you need to either recopy or hard reset.
Thanks for reply
Clark
did you get your bluetooth working again? i have the same problem, Tomtom has killed it! Hard reset seems to be the only way to get it back on....
BTTrayCE.exe you will find this file in the \windows\ folder and a link in
autostart(i have delete it, i dont need everytime bluetooth on,
i have a link in the programm folder),
B2T.
when TT overwrite it, normally you can delete it(with TC or Resco)
after a Softreset you have the original BTTrayCE.exe back...
blader said:
did you get your bluetooth working again? i have the same problem, Tomtom has killed it! Hard reset seems to be the only way to get it back on....
Click to expand...
Click to collapse
http://www.htcforums.com/touch-pro2-rhodium-f37/bttrayce-error-after-soft-reset-t2438.html
I had the same problem myself but found the answer on this forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2 and everything will go back to normal.
Click to expand...
Click to collapse
I personally renamed them, being slightly nervous about deleting files in the Windows folder: still, it worked for me and evidently this fellow on the HTCForums website
Paulplex said:
http://www.htcforums.com/touch-pro2-rhodium-f37/bttrayce-error-after-soft-reset-t2438.html
I had the same problem myself but found the answer on this forum:
I personally renamed them, being slightly nervous about deleting files in the Windows folder: still, it worked for me and evidently this fellow on the HTCForums website
Click to expand...
Click to collapse
Thx a lot !
Lost my BTTrayCe.exe (in fact, not that lost, rather the phone told me : "BTTrayCe.exe is not a valid WM application") after installing TT7.
After renaming the file all came back to normal.
So once again : thank you !
Thank you, that solved my father's problem
Problem solved.
Hi,
I had the same problem after installing TT7.
After renaming the two .dll files all was fixed after a soft reset.
Thanks you guys for your great advise and work.
With regards,
San
thanks alots
TT7 Fix!
Thanks for the Quick Fix!!!!
Where are these files!??!
I'm about to smash this phone!
tibbyltd said:
Where are these files!??!
I'm about to smash this phone!
Click to expand...
Click to collapse
Did you read the thread? It was clearly stated where this file is located.
helps me to thanks!
After emailing back and forth with the HTC support team about the Leo's "too loud ear piece" and after asking me a million questions they finally sent me the Debug tool 3.4 to run it in my Leo and send them the logfile.
Well the stupid application it's been running for days and never seems to stop. It did create some 20 DM files on my SD card which can't be seen in explorer anymore. I put it into a card reader to see what's happening.
I hard reseted my Leo to stop the debugging tool but no use, I reflashed, taken out the sd card, but nu use the darn thing still runs and kills my battery! WIFI doesn't work either!!!
What should I do?
Please help!!!
G
hard reset
The only solution that always works
funny but not helpful!
thimiost said:
The only solution that always works
Click to expand...
Click to collapse
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
wmfreak said:
If you have the answer just give it to me! Trust me I've searched every possible forum!
Regards,
G
Click to expand...
Click to collapse
you must read carefully it is hard reset
he just told you m8 perform a hard reset on the device
I guess nobody read my post!
evo6 said:
he just told you m8 perform a hard reset on the device
Click to expand...
Click to collapse
If look carefully it does say that I've hard reseted, reflashed with different rom including cooked rom but same problem!!!
any help?
regards,
G
Format Your sdcard. the file must be on there if youve reflashed
Done that too!
fards said:
Format Your sdcard. the file must be on there if youve reflashed
Click to expand...
Click to collapse
I even swapped SD cards, formatted them you name it I've done it!
Please share your wisdom if you have an answer!!!
PS debug tool 3.4 is what's causing the problem!
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
In makes sense but!
doctorcete said:
Are you doing a hard reset without your sd card inserted?..
If the answer is yes, then try..
format your sd card, then flash a new rom using goldcard method.... it is virtually impossible for the file to stay storaged in the sd (after format) or the device (beacuse u did format it when doing the flashing process).
Click to expand...
Click to collapse
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
wmfreak said:
I've reflashed even without SD (upgrade ROM 1.48 from 1.43) and the stupid and the Htclog folder is still iin File explorer under MyDevice working hard at creatinf log files!!!
I've tried to rerun the stupid Debug tool 3.4 but it says "Fail to read MFG area (6)" all the time!
I'm desperate! Pls Help!!!
G
Click to expand...
Click to collapse
I know hard reset should have helped, but try letting the phone empty and then remove the battery for a couple of hours-day, then try it agian.
Mabey I don't get the question but.. how come it's still working with the debugging tool while the phone is flashed? The debugging tool is prob. placed on a special sector of the main memory normaly not accessed by a rom, the program it self doesn't run from normal memory sectors, so you might have a try with a SPL update/overwright. If all fails send it back, why would htc give you this program? they allways say send it back and you'll get a new one?...
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
how are you doing a hard reset?, are you using the clean memory tool software on your device, or are u pressing vol up and down simultaneously while powering on the device...... I just dont get how the program stays in memory after hard reset, even after flashing.
lucid said:
please post the tool, might give some insight after disasm. MFG area is interesting.
It's been written to special memory place.
Again, please post the tool you were given
Click to expand...
Click to collapse
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Here is the tool! (BTW i fixed the problem)
okokur said:
yes, please post it.
if i "pdocread.exe -l" i find a 20MB-partition seperately.
could you post this part too?
okokur
Click to expand...
Click to collapse
I've attached the toll. I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401. Give it a go if you know what you're doing and you can read log files.
regards,
G
You got rid of it. I edit out the post
Solution:
First backup your SD, after format with FAT32 .... reinstall your ROM and after insert your SD.
got dmmnit, glad u got rid of it, maybe we can learn how it.doez stick to the rom like that n use it in other apps like smartprotect. congrats!:
hi, do u mind sharing how u got rid of it?
I run this tool too, but after have no way to stop first try to read forum. Solution to stop program already is given from wmfreak. It is not need to make hard reset or to reformat SD card. Only things to do is to run program one more time and:
wmfreak said:
I finally got rid of it by being able to rerun the program (which i prior tried a million times) and rewrite the parametres to "0" instead of 435 and 401.
Click to expand...
Click to collapse
Thank you wmfreak
Hi everybody;
I know this matter has been discussed b4 here in the forum but in fact i'm confused and have not found any way for WM phones.In this case my phone is ARTE100,i hope you'd help me get out of this like u've done many times before
This phone stucks on HTC logo and won't go to bootlaoder menu as well.
Thanks in advance.
saratel-gsm said:
Hi everybody;
I know this matter has been discussed b4 here in the forum but in fact i'm confused and have not found any way for WM phones.In this case my phone is ARTE100,i hope you'd help me get out of this like u've done many times before
This phone stucks on HTC logo and won't go to bootlaoder menu as well.
Thanks in advance.
Click to expand...
Click to collapse
you should do is To perform a hard reset device Hard reset Soft reset
Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the lower left side of your device.
Release the stylus, but continue pressing the two soft key buttons. Release them only when you see the following message on your device screen: “Press Send to restore manufacturer default, or press other keys to cancel.“
Press on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
about the gold card, for more details you can see it in -> http://psas.revskills.de/
...
gold card is just the correct original rom on the micro sd.
to make a gold card:
1.download your correct original rom
2.put it on your micro sd
3.rename the .NBH to Arteimg.nbh
4.put it into your device and enable bootloader
Rn
raving_nanza said:
gold card is just the correct original rom on the micro sd.
to make a gold card:
1.download your correct original rom
2.put it on your micro sd
3.rename the .NBH to Arteimg.nbh
4.put it into your device and enable bootloader
Rn
Click to expand...
Click to collapse
what you've never tried it ..?
and how the results...??
the success you get a gold card, Raving ..?
my post was how to make a gold card and advice to ''saratel-gsm'' on what a gold card actually is..
Hakim Rahman said:
what you've never tried it ..?
Click to expand...
Click to collapse
*of course i have tried it, i posted how to make a gold card
Hakim Rahman said:
and how the results...??
Click to expand...
Click to collapse
*im not exactly sure what your asking dude, please explain?
Hakim Rahman said:
the success you get a gold card, Raving ..?
Click to expand...
Click to collapse
* again, im not exactly sure what your asking dude, please explain?
raving_nanza said:
my post was how to make a gold card and advice to ''saratel-gsm'' on what a gold card actually is..
*of course i have tried it, i posted how to make a gold card
*im not exactly sure what your asking dude, please explain?
* again, im not exactly sure what your asking dude, please explain?
Click to expand...
Click to collapse
forget it ...!! I just want to know if you managed to get a gold card ....
Hakim Rahman said:
I just want to know if you managed to get a gold card.
Click to expand...
Click to collapse
sorry Hakim, i was not sure what you meant..
well, anyway.. that is how you make a gold card from scratch..
i have noticed you help alot on the artemis forum.. keep up the good work dude, it makes Neo's job a lot easier for him and im sure he appreciates all the help
* iv added how to make gold card to the tips&tricks thread..
saratel-gsm - click on the tips&tricks thread, you will need to look for the "Bricked Device" post.
ill ask Neo to close this thread now, i think its safe to say the OP question is solved..
Rn