Related
I bought the PDAir flip case for the Kaiser last week and got it in yesterday's mail. You can order it from PDAir direct -- there's also a guy on eBay selling them for $18.99.
The case is a very snug fit -- the keyboard slides into a pouch formed by the back of the case and a clear plastic keyboard cover. This works much better than the clear plastic & velcro keyboard cover their Wizard case used -- the Wizard case was pretty loose, and the Velcro doesn't hold up to repeated opening/closing.
The case cutouts (for buttons, USB jack, etc) match up pretty well once you get the Kaiser firmly seated -- that can take a bit of work since the case is so snug. These cutouts make the buttons easy to find -- especially the power button.
The only real problem with this case, IMHO, is the lack of microSD card storage -- previous PDAir cases have had at least one card storage pocket. Overall I'd give this case an 8.5 out of 10.
3waygeek said:
The case is a very snug fit -- the keyboard slides into a pouch formed by the back of the case and a clear plastic keyboard cover. This works much better than the clear plastic & velcro keyboard cover their Wizard case used -- the Wizard case was pretty loose, and the Velcro doesn't hold up to repeated opening/closing.
The case cutouts (for buttons, USB jack, etc) match up pretty well once you get the Kaiser firmly seated -- that can take a bit of work since the case is so snug. These cutouts make the buttons easy to find -- especially the power button.
Click to expand...
Click to collapse
Nice review, I'll probably get one.
The only real problem with this case, IMHO, is the lack of microSD card storage -- previous PDAir cases have had at least one card storage pocket. Overall I'd give this case an 8.5 out of 10.
Click to expand...
Click to collapse
I find an 8/16GB micro sd card enough, I put the spares in my normal money wallet.
I bought one a while back and it lasted less than a month,I was using the belt clip and the leather on the back became loose and the case became useless.!
PDA Air book type case
Bought this on ebay $15 + postage another $15 to GB
I don't use belt clips, it is a little thick and tight, may wear in. I seem to buy a whole shed load of accessories initially, see what I like, and then re-cycle the rest back onto ebay.
So far i quite like it if I'm walking about, but in the office, I tend to take it out and put it my shirt pocket (why do so many work shirts these days are less a pocket!!?)
I have both PDAir and Krusell case and to be frank, I like the PDAir more. However, beware of the screwed in belt clip as it might get loosen after some time, I dropped mine once but luckily on the carpet.
I Agree that the PDAir is a pretty good case, the belt clip post is the only part I changed. For a case that can stay on and be fully functional, and clip into a car mount, this one is hard to beat.
Here's my review and pics of my "improvements";
http://forum.xda-developers.com/showpost.php?p=1648005&postcount=136
I have since switched to the Pocket Solutions "Signature Series" flip as it's the best of all worlds for me as I can use the phone as a touch screen type and then very easily slip the phone out of the case to use the keyboard and/or show off the phone with no case. It really has the best swivel post I've ever seen;
http://forum.xda-developers.com/showpost.php?p=1790595&postcount=246
I bought the rectangular one with the free battery and it fits great and works great. The price for the whole thing was less then half the price of a battery from AT&T. Only thing is it took almost 3 wks to get.
I'm thinking about getting another one for my office.
How about this one ? Not sure how bulky it is but it looks nice.
_www.seidioonline.com/index.asp?PageAction=VIEWPROD&ProdID=896
RemE said:
I Agree that the PDAir is a pretty good case, the belt clip post is the only part I changed. For a case that can stay on and be fully functional, and clip into a car mount, this one is hard to beat.
Here's my review and pics of my "improvements";
http://forum.xda-developers.com/showpost.php?p=1648005&postcount=136
I have since switched to the Pocket Solutions "Signature Series" flip as it's the best of all worlds for me as I can use the phone as a touch screen type and then very easily slip the phone out of the case to use the keyboard and/or show off the phone with no case. It really has the best swivel post I've ever seen;
http://forum.xda-developers.com/showpost.php?p=1790595&postcount=246
Click to expand...
Click to collapse
Where did you bought your vent clip???
thanks
Well there seems to be a lot of views about the best cases out there, just wondered what the most 'pocket friendly' case was?
Don't care about the material as long as it isn't a sock or a stick-on option (ie an actual case)
Definitely no belt loop, preferably a very low profile clasp etc...
Basically just want something that is likely to stop it getting scratched up in a bag or if it was dropped, but don't need full armour!
Any good suggestions?
I've been looking for something pocket friendly as well... I'm almost ready to just get a thin sunglass pouch... currently I'm using a case for a Sprint Mogul, but it has a belt clip...
i use an ipod slip case, and have pulled off the belt clip, gives good protection to the screen,
going to order a leater slip case from www.pdair.com to see what thats like
I've got one of these - http://www.pdair.com/catalog/product_info.php?cPath=10100000_900000_11000164&products_id=6561
Doesn't add much to the size at all, and I keep mine in my pocket all the time.
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
scharnet said:
Here is what I'm using, it comes in Black, Brown or Pink:
http://www.wirelessground.com/tiltflipblack.html
It covers the back and front very well, the cut outs are aligned very well, it has a slimmer form factor than the Krussel Orbit I normally use.
Here is the one my spouse uses, it comes in Black or White:
http://www.boxwave.com/products/dlsleeve/at_t-tilt-designio-leather-sleeve_2906.htm
Click to expand...
Click to collapse
The "tiltflipblack" is made by PDair and is available for 1/2 that price. I've had one for several weeks and it still looks new, and I wear it every day. It's the perfect case for me.
The slimest most "pocketable" case I've found yet, is the formfitting Noreve case as seen here:
http://www.pocketpcfreak.com/archive/00006945.htm
It is also one of the very few - true - formfitting cases (using a laminated leather design, w/o the ugly and disturbing plasting cover over the KB. It protects the front and back really well, if not so much the sides. Easy to use and good workmanship.
Actually it IS meant (IMO) for pocket carrying.
Have it for about a month, still looks as new. If however looking for a drawback, then to my daily use pattern there is one. While in the case using the Kaiser/Tilt for navigation (in a cradle) needs taking it out of the case.
======
Saar
I've tried several ...
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
2) If the slide up and tilt works fine with the case on
3) The general quality and how bulky it is in a pocket
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Just wanted to add my comments based on owning 4 different cases for the Tilt/Kaiser ...
The PDAir aluminum cased is good and pocketable. It is a little on the heavy side, but I've carried it arond now for a couple of weeks and it's all right. The downside is that there is a hard plastic protector over the touchscreen of the Tilt. You have to open the case to use the touchscreen or you have to take the hard plastic out. You can either cut out or push it out with some force, but the plastic is glued in and is under the neoprene that cushions the Tilt against the case. Not the smallest feel in the pocket, but no leather covered cardboard bulk feel. The size of this reminds me of a naked 8125 in my pocket (did that without disaster for almost 2 years).
I also tried the PDAir leather flip case. That one is definitely not pocketable unless you have some REALLY big pockets. And I'm not a big flip cover guy. Another strike is the plastic keyboard cover.
I also tried the Noreve and it's a nice leather case. I would consider this one pocketable, it's rather slim. But it has the flip cover. The good thing is that it has no plastic keyboard cover. It's a little loose when you close the cover with the snap. It's not loosely held in ... that's a good fit. But the snap doesn't hold the flip cover down as firmly as I'd like.
Lastly, I JUST snapped on one of the plastic snap-on kind. Good fit, but not sure how much the plastic will help in a fall. It snapped on tightly ... so tightly it took 15 minutes to get it off! I did not like that at all. If something goes wrong and you need to drop the battery quickly ... 'quickly' won't happen with this case. You can still use the touchscreen and it's a very tight snap on fit. Doesn't add much bulk or weight for pocket storage. NOTE: if you pick one of these up, be careful and check whether the belt clip button on the case is screw on or permanent. The permanent ones won't be pocketable.
The best feel in the pocket is the plane Tilt/Kaiser with no case. But I know I'm pushing my luck if I continue to do that. Still switching up to see what I end up liking most. Hope this info helps folks.
Tothotspur said:
i would be interested in your opinions and if you could confirm these points for me:
1) Can you still use the touch screen?
YES!
The openings for the keypad and LCD are tappered to provide the best access to the edges but they become alittle harder to get at due to the thickness of the plastic.
2) If the slide up and tilt works fine with the case on
Yes the screen slides out and up to the normal position. The upper softkeys are silightly harder to get at when tilted due to the tickness of the plastic.
3) The general quality and how bulky it is in a pocket
Fit was tight, and snapped into place. I do not plan to use the clip as it is optional, but I will follow up with a proper review and test it out. I will get exact mesuraments later but it is not a big change and well worth the extra size.
this looks perfect for me as i wanted a 2 piece armour case where i could still slide open the phone
Click to expand...
Click to collapse
Yup! Cheap Too!
I will follow up with a better review tonight.
What I do not understand about using the transparent plastic snap, is why the hack would one need a case at all when all the really "pocket sensitive" components (Touch screen, Camera lens) are not covered at all... IMO if one is indiferent to this, they may not need a case at all.
I guess that all cases are kind of trade offs. Whatever protects adds bulk in the zones protected, light protection protects less than heavy armor but presents snappier use and so on.
The potentially best solution I've seen yet is actually not offered for the Tilt/Kaiser. It is made by EB Cases and called the eNovo. It is made of sturdy yet thin laminated leather, offering a form fitting case with an optional leather flip.
http://www.ebcases.com/-strse-3333/eNOVO-PAQ-6500/Detail.bok
I'm trying for some time to convince EB, Noreve and BoxWave (the ones apparently having the technology) to think about it...
Cheers,
======
Saar
thanks kahibbi and SpeedRazr for your input, i look forward to your review
SpeedRazr said:
I just ordered one of these yesterday. I will let you know how it is hopefully tomarrow or over the weekend.
http://cgi.ebay.com/Smoke-Protector...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I picked this up from DayDeal.com and it didnt' fit my ATT tilt. the back does but the front will not stay on
i picked up the alum. case for travel and biking it is perfect. also from DayDeal
Hey guys/gals, just thought I'd share this with you. I bought this case for my Tilt and it's one of the best I've had. The phone fits perfect in this case. Snug but easy to get out. I paid $12 on ebay for it. Make sure you buy the one with the attached belt clip (like in my pic). There is another one on there that allows you to change the belt clip. I had that one too but (same perfect fit) but unless you have a thin belt, the clip will not catch the belt. I'll include one of my previous cases. This one is just a better looking case and feels real sturdy. Hope you like it.
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Kraize92 said:
Have you seen a case that exposes the miniUSB port? I've seen a lot of good cases, but none that will expose the miniUSB. My second option would be just to go with the Seidio Slim Ruberized case.
Kraize
Click to expand...
Click to collapse
Unfortunatly no I haven't. There's a thread on here that has the Seido clip with mods on it. Looks sweet.
I recently had bought a case for my Wing (before getting the tilt) and it fits the tilt perfectly and allows access to the usb port - unfortunately it seems the ebay seller is no longer registered so I can't even get the details from the auction.
This is HTC branded and the listing was titled NEW HTC TOUCH SHADOW MOGUL VX6800 MDA OEM LEATHER CASE
Edit - Found the case, different seller and more expensive, but you can see it - http://cgi.ebay.com/OEM-Leather-Case-Pouch-for-HTC-Wing-P4350-Herald-XV6800_W0QQitemZ150268701210QQihZ005QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
dampeal said:
I've also got the Krusell CarHoldicKit adapter as well to go with it, I like being able to unclip my phone from my belt with the clip still remaining on my belt, and attach to dashboard while driving, it makes using the GPS very easy and other related accessories as well...
Click to expand...
Click to collapse
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
airjer said:
It works that well? I was interested in both the orbit and carholickit (think i still have an old one), but was thinking the flap would be in the way when using it for GPS? This isn't the case?
Click to expand...
Click to collapse
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
dampeal said:
I've got the Krusell Orbit leather case with multidapt and I really like it, I've tried several so far and this is the one that I'm keeping...
http://www.krusell.se/product.php?productID=2776&category=51
Click to expand...
Click to collapse
That's the one I've just bought... and I like it a lot. Fits really well although the slideout keyboard doesn't slide as smoothly now it's in the case.
dampeal said:
The flap and GPS? No, I have my mounted like this, so when I open flap it just rests on dashboard:
If you wish you can read my full review of the Orbit HERE, lots of pictures etc included of course
Click to expand...
Click to collapse
Thanks for the GREAT review.
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
jim131 said:
I recently purchased the Seidio rubberized case/holster combo. This is an excellent product. I was looking for protection for the Tilt's body, however, wanted to access the screen. I was using the metal case from Monaco, very well built, however, twice my Tilt fell out of the case when the unit was on my belt and the latch caught on the bumper of my car and the Tilt when bouncing on the pavement. Also, my signal was very weak with the metal case, never realized this was the problem as I always used a metal case. I switched to this combo unit and I now have an extra 1-2 bars of signal regularly. Also, I like the fact the holster will hold the unit with the skin in place, faces inward, giving max protection to the screen which is easily accessed. If you want a case to protect the body of the tilt, access the screen easily, and use with a belt clip (do not have to use the clip holster), I could not imagine a better choice. I am very happy with the quality and design of the unit.
https://www.seidioonline.com/ProductDetails.asp?ProductCode=BD2-HLCSRCG8925-BK
Click to expand...
Click to collapse
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
thetruth1985 said:
i second that one. ive gone thru metal, silicone, plastic and even leather cases for my tilt. none of which seemed to work until I went with the seidio innocase holster combo that the gentleman above me stated. its really the best case and it comes with the holster facing inward so you can have maximum protection for your phone with easy access. point blank period.
Click to expand...
Click to collapse
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
texas said:
With that case do you have to face it inside, and is it really worth $50.00? Geez their high.
I already have a soft rubber case and wondering if I could get buy just buying the holster for it.
Click to expand...
Click to collapse
not necessarily, you could face it either way and its worth it. believe me, its worth it. even though its a little pricey.
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
grymicast184rc said:
I have this HTC OEM case and it's real nice and pretty cheap. Fits perfectly with the Seidio case installed on the Tilt.
Click to expand...
Click to collapse
This is the same case I have. Been very happy with it! For the person who asked... it does leave the USB port exposed.
mrschwarz said:
The rubberized case is good. I gave up on the holster because the clip kept getting caught and would disengage the phone causing it to fall.
I got a Palm Treo case and it fits perfectly. The Seidio case also prevents the Tilt's buttons from being accidentally pressed.
This is the best combination of all the cases I have tried.
Click to expand...
Click to collapse
what holster were u using
GuySparkz said:
what holster were u using
Click to expand...
Click to collapse
I bought the Seidio case and holster combo kit.
http://www.noreveusa.com/
http://www.noreveusa.com/category/S...0_-_HTC_Touch_Pro_Tradition_leather_case.html
Code: Holiday08
Exp: 12/31/08
I have the case and I love it. I'm thinking of using the code for the new metal clip.
looks nice. but kinda pricey for a lether case =T
Yea, it looks really nice.
I wonder how stable it is in the case once it slides open.
The leather case looks sweet....but does it work ok with the slider?
Anyone use it?
I use it and love it. The phone is totally secure inside even when using the slider.
The case holds the phone quite snug even in the open position.
The new belt clip is so much better than the one they used just a year ago.
The warranty on the case is lifetime, my kaiser case wore through around the GPS ant opening and they replaced it no questions asked.
It's worth the expense, paired with InvisibleSHEILD on the face only (had to buy the full body and only use the face pieces as the case is too snug for the full skin)
I just received this horizontal case from boxwave http://www.boxwave.com/products/dlcase/at_t-fuze-designio-leather-case_3350.htm
I didn't realize that it did not come with a belt clip, also the fact that the keyboard is covered by the plastic worries me, (Keyboard paint will stick to the plastic overtime?)
So just to reiterate what Kyphur said, this Norve case does come with a belt clip?
Yes it does.
I got the Proporta case first and it had the plastic over the keyboard, I didn't like that at all.
Order Submitted, Thanks.
kyphur said:
The case holds the phone quite snug even in the open position.
The new belt clip is so much better than the one they used just a year ago.
The warranty on the case is lifetime, my kaiser case wore through around the GPS ant opening and they replaced it no questions asked.
It's worth the expense, paired with InvisibleSHEILD on the face only (had to buy the full body and only use the face pieces as the case is too snug for the full skin)
Click to expand...
Click to collapse
Hm I was really looking forward to installing BodyGuardz and then using the Noreve Case. But from what I heard is that the BodyGuardz case is thicker than the InvisibleSHIELD. So from what kyphur says, I probably couldn't install BG and use this case?
The Noreve case is too snug for any full body protector. You will only be able to use the front face.
papercut2199 said:
Hm I was really looking forward to installing BodyGuardz and then using the Noreve Case. But from what I heard is that the BodyGuardz case is thicker than the InvisibleSHIELD. So from what kyphur says, I probably couldn't install BG and use this case?
Click to expand...
Click to collapse
I have bouhgt capdace silicon case to my HD 2 and i tired to put it on the leather case but it didnt fit in eaven close, so i came up a way to enlarge the case
If your device does not fit in to case just put the case in hot water and then just streach it as mutch as it goes. I streched it around my calculator case and after it was dryed 24h i tooked it of and but the HD 2 whit silocon case to it and this time it fit very fine
So if you want to use the original leather case but its too small dont worry
So your saying you put a silicone case on your phone, then tried to put it in the leather case? What is the point of 2 cases? Also the title of your thread is misleading. It should say "Leather case too small when hd2 is already in a silicone case."
Why did you do that for? Poor leather case.
Are you going to try stretching a silicon case so that you can fit another silicon case on the HD2?
mengsuan said:
Are you going to try stretching a silicon case so that you can fit another silicon case on the HD2?
Click to expand...
Click to collapse
Don't be silly!!! He would need yet another leather case to protect the silicon one. And another to protect that, FFS!!!
I mean that i have the silicon cover whitch covers the back and the sides of the phone but the screen is un covered ( i have invisible shield on it) but i want to put it on the leather case so if i but example my keys to same pocket i know there would not be any scratch on the screen but what more "cover" than more "cover"
Now it does not broke so easy if it some how drops
I just hear "thump" voice when it drops Lol
haven't y'all ever heard of double wrapping it?!?
Actually I have 2 cases as well. I use the bodyglove kickstand case, then a leather belt case that the phone lives in.
But mine fit together nicely.
Actually my original leather case *IS* too tight.
In fact I have never used it because it's so difficult to take the phone in & out.
But I guess it's bad luck (like other things about my Leo ... coming in on Monday from warranty screen repair).
I carry this around with me at all times, I couldn't take my HD2 out of the house without it. Double-wrapping my HD2 in silicon and then leather case just isn't enough for me.
vince2773 said:
Actually my original leather case *IS* too tight.
In fact I have never used it because it's so difficult to take the phone in & out.
But I guess it's bad luck (like other things about my Leo ... coming in on Monday from warranty screen repair).
Click to expand...
Click to collapse
I think its just a matter of time before the tight original leather case becomes loose enuf for easy use...well mine has...
Kalavere said:
I carry this around with me at all times, I couldn't take my HD2 out of the house without it. Double-wrapping my HD2 in silicon and then leather case just isn't enough for me.
Click to expand...
Click to collapse
Fits like a glove!
When I first got my HD2 I saw the leather case, and thought "That is way too tight" and I ended up buying a velvety case (a bit like the one my old HD (Blackstone) came with), but I didn't like the way it felt, so I started using the leather one, and after a couple of days it stretched and now it "fits like a glove" and if anything I find it a little too loose now!
Kalavere said:
I carry this around with me at all times, I couldn't take my HD2 out of the house without it. Double-wrapping my HD2 in silicon and then leather case just isn't enough for me.
Click to expand...
Click to collapse
If you want the ultimate protection for your HD2 check out the Otterbox Defender case. Amazon and Ebay are the the cheapest.
aximman said:
If you want the ultimate protection for your HD2 check out the Otterbox Defender case. Amazon and Ebay are the the cheapest.
Click to expand...
Click to collapse
I was of course being facetious with that comment, but yes I have both and they are both excellent. I use the Defender mainly for nights on the town and the Commuter for everyday use.
Guess I need a little patience
@nessqn
@namwollen
Guess you guys are right and that I was a little impatient ... I will try as soon as I get the damn phone back (DHL screwed up and I have to wait two more days)