ive forgot my password !! - XPERIA X1 General

i just bought my new X1 and while i was doing the setting i set up a password
and the next day i forgot it ...
can anyone help me with reseting it ??
please help ..

Try a hard reset to set it back to factory state, but you'll lose any information and programs that you've installed since you bought it. You can search the forums if you don't know how.

Just in case you don't know how to hard reset without access to the phone, hold both buttons on the front and then push the stylus into the reset button under the battery cover.

opps, that was careless....

thank you very much ..
i thought there is other way than hard reset ...
but finally i did it ..
thanks and you were very helpful guys ..

hvx2002 said:
thank you very much ..
i thought there is other way than hard reset ...
but finally i did it ..
thanks and you were very helpful guys ..
Click to expand...
Click to collapse
if that was possible, don't you think it will be useless to setup a password in the device?

cursor said:
if that was possible, don't you think it will be useless to setup a password in the device?
Click to expand...
Click to collapse
excuse me but u have a wrong idea .
can you tell me if you forgot your pc's password, there is no way except you format it ??!!
for windows ?!!
even if you set a password on the BIOS there is a way to open it, right ?
thanks again

You can use endless exploits to sam hashes to get back into a lock pc but winmo ... not sure.

sure there is a way,
but!
no one knows it!
Hard reset it mate, i think it's the best (and fastest) way to use your phone again.
good luck

Related

Help! Unlock problem!

When I was setting up the WM6 release on my Blue Angel (SX66), I entered a pin (1994) for the device. I reset the device, and it gave me a dialog that said "Password" as the header, and the box had "Emergency phone calls can be made." It also had a keypad with CLR and 0 as the bottom row. The bottom buttons are Unlock and Menu. The password 1994 when typed in doesn't work. It gives me my hint, but the password still doesn't work. I've hard reset it to no avail. Any assistance would be greatly appreciated!
try to hard reset first (how to?) the information can be found at the wiki, use the search link at the web.. good luck
evoluzionne said:
try to hard reset first (how to?) the information can be found at the wiki, use the search link at the web.. good luck
Click to expand...
Click to collapse
I've tried hard reset, it didn't work. I'm just going to re-flash the ROM.
hard reset should work. did you perform the no/yes/yes routine (part of the hard reset procedure)?
Got it working - turned out I just needed to perform the N/y/y procedure - thanks everyone!
btr94 said:
Got it working - turned out I just needed to perform the N/y/y procedure - thanks everyone!
Click to expand...
Click to collapse
In WM5/WM6 the N/Y/Y procedure is the actual hard reset in WM2003 it is Power+Reset buttons at the same time
raymonds said:
hard reset should work. did you perform the no/yes/yes routine (part of the hard reset procedure)?
Click to expand...
Click to collapse
I have the same problem WM6) on the Siemens SX66 from Cingular, how do I execute the n/y/y procedure ???
HARDRESET 101
Steps...
1. SoftReset
2. When the three color stripes(four including white) appear QUICKLY press and hold Record and Camera button.
3. If a menu appears... (if not softreset again while holding Record+Camera)
use Record To NAVIGATE the three items and Camera to TOGGLE Yes/No
4. Press Mail button to Execute the Instructions.
NOTES:
------------------------------------------------
if you're upgrading/changing ROM then USE... No/Yes/Yes
these will format the storage and replace them with the new ROM files
------------------------------------------------
if you only want to only erase the password USE... No/Yes/No
these will keep your files. only the registry is cleaned.
Please help
My BA just gave me the unlock error & now I' can't get in. Followed the procedure described (hard reset:N/Y/N) but it just nothing happens... The mail button doesn't seem to be working ..... Can someone please help me to unlock this thing?. Can I reload WM6? or do I need to downgrade & upgrade again???.
Thanks for the help
jo.
jesusodin said:
My BA just gave me the unlock error & now I' can't get in. Followed the procedure described (hard reset:N/Y/N) but it just nothing happens... The mail button doesn't seem to be working ..... Can someone please help me to unlock this thing?. Can I reload WM6? or do I need to downgrade & upgrade again???.
Thanks for the help
jo.
Click to expand...
Click to collapse
because your mail button isnt working you havent actually executed the procedure...
you could try the MTTY Alternative of hard reset/ i dont know about your data if it is safe with that alternative.
i havent had any experience or need to use it.
But I KNOW that the solution to your problem is SOMEWHERE in this BA forum.
Goodluck in searching...
SilverSamurai said:
because your mail button isnt working you havent actually executed the procedure...
you could try the MTTY Alternative of hard reset/ i dont know about your data if it is safe with that alternative.
i havent had any experience or need to use it.
But I KNOW that the solution to your problem is SOMEWHERE in this BA forum.
Goodluck in searching...
Click to expand...
Click to collapse
Thanks.... Did try the mtty & it worked. But lost all the applications I' had. Good thing that I' had all the software in one file in my computer....
Thanks again.
It's a bug in the OS.
jesusodin said:
Thanks.... Did try the mtty & it worked. But lost all the applications I' had. Good thing that I' had all the software in one file in my computer....
Thanks again.
Click to expand...
Click to collapse
I can confirm. It's a bug. My battery is loose and everytime my battery falls out and I reboot. I get this error. I have to reformat everytime. Please help me out. I have done it now 3 time already and real pain.
XPLODE please help. This is wonderful full functional ROM. I need this fix.
bhavyadesai said:
I can confirm. It's a bug. My battery is loose and everytime my battery falls out and I reboot. I get this error. I have to reformat everytime. Please help me out. I have done it now 3 time already and real pain.
XPLODE please help. This is wonderful full functional ROM. I need this fix.
Click to expand...
Click to collapse
i dont think it's a bug. if it is it should be eliminated as early as the 2nd ROM release.
it's a hardware compatibility in which, no one yet has found a fix.
if you want your data to be safe, the only workaround with this is not to activate the phone's password and/or find an alternative third party phone locker with password feature at bootup.
have a nice day!

Spb Back up HELP!!!!

So I backed up my phone after I found it wouldn't sync to save my contacts and all. Bricked my phone, got a replacement. NOW THE PROBLEM is that when I restore, my device lock comes up but the code (which I remember) doesn't work.
Is there a file I can NOT restore so I can get the contacts and rest back?
Man I miss my Treo, Palm Desktop was beautiful. Microsoft SUCKS
Oops. You're going through something which I too have been through. But,now there is a solution. Run that backup file exe. Go to 'tools'(right soft key)//advance options//tick 'dont restrore password'
Do tell me if u r successful in getting ur stuff back
PS: was going to sleep and posted this via wifi. really felt that u r in trouble
kdskamal said:
Oops. You're going through something which I too have been through. But,now there is a solution. Run that backup file exe. Go to 'tools'(right soft key)//advance options//tick 'dont restrore password'
Do tell me if u r successful in getting ur stuff back
PS: was going to sleep and posted this via wifi. really felt that u r in trouble
Click to expand...
Click to collapse
Ok, see once I run it, turn the phone on, the device lock comes up and I'm stuck. The only options it gives is to cancel. How many times can I put this thing back to factory settings before I brick it? Walk me through this like I'm stupid! LOL I thank you for responding, seriously!
After I this, I gotta do the memory increase... grrrr
lashonp said:
Ok, see once I run it, turn the phone on, the device lock comes up and I'm stuck. The only options it gives is to cancel. How many times can I put this thing back to factory settings before I brick it? Walk me through this like I'm stupid! LOL I thank you for responding, seriously!
After I this, I gotta do the memory increase... grrrr
Click to expand...
Click to collapse
You wont be bricking the phone that way at all Do a forced hardreset(both softkeys+softreset button)
Now, follow these steps
1)click on the backup exe file
2)go to tools>dont restore password
3)also uncheck stop all processes
4)dont go in for 'full backup'. Do a custom restore and select only PIM and my documents from it.
you can always install the programs after that because IMHO the PIM data is far more important
keep us updated
THANK YOU!!!!
kdskamal said:
You wont be bricking the phone that way at all Do a forced hardreset(both softkeys+softreset button)
Now, follow these steps
1)click on the backup exe file
2)go to tools>dont restore password
3)also uncheck stop all processes
4)dont go in for 'full backup'. Do a custom restore and select only PIM and my documents from it.
you can always install the programs after that because IMHO the PIM data is far more important
keep us updated
Click to expand...
Click to collapse
OOps didn't even do the hard reset just did the back up options and it worked! ty I would've been upsetting myself trying different scenarios on my own so I appreciate this! Chick be dying without them numbers ya dig? Oh my calendar. I will be back this up to my storage card EVERY WEEK or day if need be, cause this was so wrong.
Now to fix the damn memory issue...I know the thread is up and they say it is good...
Glad to know that it worked for you
similiar problem i guess
hi i am also using htc herald, i just flashed my ROM and the new rom is working fine. However i tried to backup my stuffs using spb backup, and i chose full restore(which including system setting may be) and since then my phone just wont boot up, only 1 screen showing smart mobility is appearing constantly. Do this have anything to do with me flashing the phone? And what are the solutions can i try? Thanks a lot
hy00010 said:
hi i am also using htc herald, i just flashed my ROM and the new rom is working fine. However i tried to backup my stuffs using spb backup, and i chose full restore(which including system setting may be) and since then my phone just wont boot up, only 1 screen showing smart mobility is appearing constantly. Do this have anything to do with me flashing the phone? And what are the solutions can i try? Thanks a lot
Click to expand...
Click to collapse
SPB backup doesnt let you upgrade/downgrade between ROMs. To be on the safe side, just restore PIM+my documents after ROM upgrade.
Follow the steps exactly the same way I've listed in my previous post
thanks for ur reply, i hard reset my phone and luckily it is starting to boot up and this time i din restore the system back up and now my phone is working fine. Thanks again.
I do have this problem. i dont see your stop give me a solution, I can do anything when Screen PDA only show ..
ENTER YOUR PASSWORD AND TAP "UNLOCK". YOU CAN ALSO ENTER AN EMERGENCY PHONE NUMBER
0 0:08:00
i think numeric which show down below is timer for keep entering password. .... Suck. Please Help me bro
I m having the same problem later i restored with trial spb backup, no solution atm, can you fix it?
cagefronsac said:
I do have this problem. i dont see your stop give me a solution, I can do anything when Screen PDA only show ..
ENTER YOUR PASSWORD AND TAP "UNLOCK". YOU CAN ALSO ENTER AN EMERGENCY PHONE NUMBER
0 0:08:00
i think numeric which show down below is timer for keep entering password. .... Suck. Please Help me bro
Click to expand...
Click to collapse

HardReset that no1 ordered

A few days ago something weird happened... I got up in the morning and when I checked my phone it was at the point of the HardReset when it asks the user to tap the screen to align it. I didn't ask for that hard reset. What could be the problem?
istoica said:
A few days ago something weird happened... I got up in the morning and when I checked my phone it was at the point of the HardReset when it asks the user to tap the screen to align it. I didn't ask for that hard reset. What could be the problem?
Click to expand...
Click to collapse
Not sure to be honest. Some issues which appear with the HD can be rectified by flashing back to a stock rom then reflashing custom rom again
I've been having the same problem...found a few others who have also......if anyone has a solution please let us all know.
samlives said:
I've been having the same problem...found a few others who have also......if anyone has a solution please let us all know.
Click to expand...
Click to collapse
The Solution already mentioned by Fallan is to Flash a stock ROM is the simpliest way. Another option is to use mtty which is the fastest way however, can be less safe for noobs.

[Problem]Device.exe CRASH

Hello when i receive a call my phone crash after i answer! How to fix ot?
Thanks
no idea? i donct want to hard resert
I think hard reset is what u realy need to start with...if that does not help consider flashing different rom...official or one of our cooks.
i hard reset this morning and i finish to customise my phone in the night... and do it again i can't replace the originalin the right folder?
do u use any backup?? MyPhone or any standalone soft?? with that you don't need to spend hours in customizing your phone after flashing or reseting...
"...and do it again i can't replace the originalin the right folder?" -> exuse me, but could you explain again what you wnated to say in that line??

Problem With Flashtool.

hello xda . I have problem with flashtool. when i connect my phone it tells "Device Connected in Flash Mode. And When i go to install kernel it doens't Find my device "and i get error" . can anyone tell me what to do ? Thanks in Advance.
Uploaded with ImageShack.us
Can you provide us the exact things you do?
Like said in the other thread, things like turn phone off, press back button etc?
We can't help you too much with too less information..
TimeWasterNL said:
Can you provide us the exact things you do?
Like said in the other thread, things like turn phone off, press back button etc?
We can't help you too much with too less information..
Click to expand...
Click to collapse
sry now i tryed your way and i did it. if i will have other problem i will post. Thanks
Glad it helped.
But if i may give you a hint. Try to read most things as carefull as possible, most problems are made because people don't follow every step right.

Categories

Resources