Resco Keyboard - Touch HD General

How can i set Resco Keyboard as default, every time i do a soft reset the standard keyboard will show up.
Please help.

Unable to solve this problem, installed spb keyboard. It works after any reset.

Henk Rorije said:
How can i set Resco Keyboard as default, every time i do a soft reset the standard keyboard will show up.
Please help.
Click to expand...
Click to collapse
I have installed Finger Keyboard 2 and had a similar problem until I installed SIP Change which allows you to choose which keyboard you want to use as default. Then no matter how many times you soft reset your phone, it will always be your default.
Just install SIP Change and then go to Start/Programs/SIP Change and select which keyboard you want.
Enjoy

Related

Changing Default Input method Bombs out Device

Done this twice. First with Wizard Reg Tweak and then with SK Tools
Both times I set Resco Keyboard as the Deff Input app.
Both times after soft reset device boots into a white screen and does no more. I need to do a hard reset and re load
Just a Heads up.
Any one know a way to set resco keyboard as default as it always resets to normal keyboard.
Jules

PCM Keyboard isnt working

hi,just installed the pcm keyboard on my hermes.
now i want to setup the keyboard in the system settings, but if i choose the PCM keyboard and click OK, the pcm keyboard is still not choosen but therefore the standard keyboard.
another problem. if i choose PCM Keyboard and then Options, there comes a message up
Code:
PocketCM Keyboard has to be the current SIP in order to configure it.
And now?
tried a reset ?
Same problem here. I've been trying lots of different versions without success. I uninstalled many other apps, removed today plugins, enjoyed magical steps such as [reset, install, reset, select, reset and try to use] and even after hours and hours of setups I never saw what this soft was looking like :-(
I'm running WM5 on HTC wirzard (Qtek 9100).
You must download SIP Changer.
http://forum.xda-developers.com/showthread.php?t=271008
Then run Programs - SIP changer and change keyboard on PCM keyboard. Then you can go to Setting and set up PCM keyboard.
divocak said:
You must download SIP Changer.
Then run Programs - SIP changer and change keyboard on PCM keyboard. Then you can go to Setting and set up PCM keyboard.
Click to expand...
Click to collapse
I did this twice, still doesn't work !
I had the same problem, Sleuth's SIP Changer fix it, never had that problem since.
Try doing it after a soft reset.
I had a similar problem, here is what happened with me:
1. I uninstalled v0.8 then installed the latest one
2. tried to change the options of the KB in the settings menu..
3. I got the same message
4. the I looked at the kb icon (down near the soft keys) and it was not set to PCM kb..
so all I did is changing it to PCM kb and then went back to options and everything works fine now...
this might sound very stupid.. but it worked for me... I can't understand why this happened in the first place.. but you can give it a try..
cheers
my problem was solved with the SIP Changer
Sorry for last post. I didn't understand SIPchanger needed a soft reset. This works now. Thanks !
i can load the software fine on my hearald but it comes out really big and doesnt fit on my screen. only the middle part of the keyboard shows up on screen. but that part fills 90% of my screen. can someone please offer a solution.
rackols said:
i can load the software fine on my hearald but it comes out really big and doesnt fit on my screen. only the middle part of the keyboard shows up on screen. but that part fills 90% of my screen. can someone please offer a solution.
Click to expand...
Click to collapse
are you sure you did not install the VGA version??
Thanks Duke. Feel kinda foolish now appreciate your time.
Hey, I did the steps that you said and now my phone seems bricked. It gets through the boot screen and into the Windows Mobile 6 Professional screen and stops. Any ideas?

default keyboard

any one know how to change the default keyboard on an alltel touch(vogue)?
SIP Change
wow abe you really get around. I appreciate all your help. I dont understand what a sip is though. i installed the resco keyboard and there was an option to set it as default, now i want the 2manyphones pcm keyboard to be my default but I cant figure out how to change it. And I cant uninstall it cause it always says its in use. once again I need the kings knowledge! thx man
http://forum.xda-developers.com/showthread.php?t=271008
did you try switching to a different keyboard before uninstalling?
ya it still says theres a sharing issue and it cant be uninstalled
Make sure under all settings for each keyboard, that it's not set as default, if it has that option. Then open SIP change and set it to whatever one you want as default, with about a 15 second delay time, and after a soft reset, you should be fine.
SIP = Soft Input Panel or Secondary Input Panel

Touchpal freezing

Hi,
I use Touchpal V3.5 and i absolutely love it, if you haven't tired it I highly recommend it, especially good is the mixed language input and I actually type faster using touchpal+gsen in landscape mode than I did with a hardware keyboard (a worry that almost prevented me from buying this marvelous device). I do have two little niggles that would be great if i could overcome somehow:
1. Setting Touchpal to the default keyboard does not stick after a restart/reset. I have to change the keyboard each time i start up. I tried SIP Change but it doesn't seem to have an option for running at start-up....anyone know if i can get at the registry somewhere or something?
2. When I first open it, if i try to type in Chinese before using English, it freezes in a bad way, disabling EVERY window that tries to call the sip and requiring a soft reset to make the phone useable again. If I open it, type something in english, and then switch the input to chinese it runs like a charm until I restart again...what is that about?
Actually neither of these issues is a deal breaker, but it would be nice not to have to worry about it, is anyone else having these troubles?...any suggestions are greatly appreciated!
touchpal
i have touchpal also and cant keep it as default. Ive tried all the fixes there are on all the threads. Doesnt work for Touchpal. any suggestions or fixes would be greatly appreciated.
Well I figured out the answer to problem one on my own...TF3D takes a little time to load and interferes with SipChange so you need to adjust the delay so as to happen after TF3D is finished.
Just tap SIPChange, select the IM you want, and set the time to 45 seconds (shorter may work). Bingo, stays the default IM on restart
whats the difference (apart from it's tabulated) between touchpal and "compact QWERTY" mode keyboard?
you also need to Go make this change: HKCU\Software\HTC\BootLauncher\Apps and remove the folder called "Startkey"
I have the same problem with touchpal, where do i do this?
Just tap SIPChange, select the IM you want, and set the time to 45 seconds (shorter may work). Bingo, stays the default IM on restart
@FRUSTIN:
TOuchpal is third-party software by CooTek, "Compact Querty" is just a different layout for the tock HTC input method. TOuchpal is MUCH more feature rich and just kicks the [email protected] out of the default keyboard in every way, it supports tons of languages and multi-language input (go back and forth between two languages in the same sentence without changing any settings), web hotkeys, adds copy/cut/paste and D-pad to EVERY app, etc. check it out at www.cootek.com
@DIAMONDBS:
I did NOT do that and it works perfectly for me...why do you need to remove an entire folder from the registry? Can anone confirm this?
@WEETABIX1980:
Just go to start>programs>SIP Change, when the program opens you select Touchpal from the list of input methods and then change the numbers in the box below the list to 45, then click "Select"...should be the only button there...tapping "OK" is not good enough, be sure to tap "Select"
thanks, any clue what sip change in dutch is in the programs?
anyone knows this?
SIPChange is a little tool developed here at XDA:
http://forum.xda-developers.com/showthread.php?t=271008
Download the cab to your phone and install. This should then give you the options mentioned above.
Touchpal intermittantly hangs on me aswell. I post on here about it before. I tried allsorts to cure it (hard resets, clean installs etc). So annoying when demoing the phone to a friend and all of a sudden the keyboard hangs and wont popup.
I used to love Touchpal, now I hate it and will not install it on my phone.

default keyboard keeps changing back to original

when ever i aet a custom keyboard as my default it changes after i restart my phone :s
any ides why or a fix?
From Finger Keyboard 2 thread:
Rozenthal said:
SIP CHANGE:
Installing this will allow you to keep FingerKeyboard as default keyboard after you soft-reset the device. Normally, it would switch back to default WinMo keyboard after every soft-reset, and it would have to be reselected under input options. Keep in mind that for this to work with Touch HD, you must increase the timeout delay to at least 50 seconds!
Click to expand...
Click to collapse
I have this problem too, and even after Finger Keyboard 2, it still changes back after soft reset.
I don't know if we'd need to change that timeout setting. It's not clear how to do that.
The old version of Shap's Advanced Config xxxxxxxx [edit]
EDIT: I got confused. See the post below about using SKTools to do it. That's what I used
10 second delay has worked for me with both the Blackstone keypad and Finger Keyboard 2.
hi guys.
i found better solution.install latest sktools.start sktools.choose category.under maintenance/input methods choose fingerkeyboard as default keyboard and soft reset sexperia.voilayour default keyboard is fingerkeyboard v2.cheers

Categories

Resources