Hi,
sorry if this question was asked but I could not find previous posts.
I would like to try newer ROMs on my Qtek S200, but before I'd like to backup the current, original, ROM (SPL 2.09.0000, Italian OS), just in case.
However, wizBackup (mtty 1.42) refuses to dump the ROM since the phone is not CID unlocked (the error is "You didn't get the proper security level to download a specific image"). AFAIK the only way to CID-unlock the prophet with SPL 2.xx it is to use the downgrade procedure explained elsewhere. However, in this way I would loose the original ROM before I could backup it!
Is there some way to dump the original ROM before downgrading to unlock the device?
ok, I'll ask an easier question, then
anyone has dumped (or knows from where to download) localised Qtek s200 ROMs (especially Italian)? I can find no download area at www.qtekcorp.com
Two people lookin'... indeed :lol:
I'm still having - after 3 months - the same two problems.
Has someone sorted them out ?
Thanks and excuse my bump
looking for the same thing.
I'll end up unlocking and upgrading my S200 without a backup of the original ROM. I doubt Qtek will release any upgrades since the device is quite old now.
It's a shame they did not even release the original rom for download.
So too bad, I'll take the risk and unlock the phone. I'm confident that the imate Italian ROM, though not very new, will work better than the one I have now.
My S200 is 6 months "old", and for the very first three months, it hasn't any support data on pocketdevice site because "too new".
Now is it obsolete and nobody will release anything for such brick ???
What a kind of policy is it ?
Thank you, but I think this is a dead-end policy for QTEK
Bye
Qtek S200 Original .Cab files?
Does anyone have access to the original .cab configuration files that came under the 2.09 Rom Ver. ?????
Trying to remove the Batt. & Comm Manger icon from the base of the screen.
Under the 2.09 version both icons were removed when the unit 1st configures its self and places a batt. icon on the top tool bar.
Not looking to install any additional program that monitors all of these items just want the original config .cabs that perform all of these task.
Please post link or notify via private msg, Thanks
read the wiki
the official and original 2.09 files are on the ftp server....
Jesterz said:
read the wiki
the official and original 2.09 files are on the ftp server....
Click to expand...
Click to collapse
Also in Spanish language????
Annita
Hello,
I own original Artemis P3300 from HTC with locked CID, so I'm not able to install other ROM than original from HTC. Today I try to intsall "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" ROM and I leave it. After aprox. 25 minutes I did soft reset and I was very surprised. Despite CID lock new ROM booted. New system is very nice and more more fast than original HTC ROM and has good software base against original HTC ROM. Is it possible over CID lock? Have someone similar experience? It works really and I don't understandt, but I'm very happy. No money lost and cool ROM is on
----------------------------------------------------------------------------------------------
Sorry about my English, I'm from Czech Republic.
Wow ... that is isteresting. I have also tried several ROMs, as I have Russian on my P3300 and want english, and above all my device is also CID locked.
You sure that yours was locked, cause if so I will also try then to flash this ROM, but few questions:
1. Safe to flash this ROM (as name implies it is for Dopod machines) on HTC Artmeis
2. Does this ROM support GPS.
3. How does it compare to WWE shipped ROM from Artemis
EazyVG said:
Wow ... that is isteresting. I have also tried several ROMs, as I have Russian on my P3300 and want english, and above all my device is also CID locked.
You sure that yours was locked, cause if so I will also try then to flash this ROM, but few questions:
1. Safe to flash this ROM (as name implies it is for Dopod machines) on HTC Artmeis
2. Does this ROM support GPS.
3. How does it compare to WWE shipped ROM from Artemis
Click to expand...
Click to collapse
Good evening,
yes my device is CID locked on 200%. When I try to install other ROM, for example "ARTE DOPODAU 1.25.707.02 026990 WWE SHIP" it ends same as before this "experiment" = "BAD VENDOR ID". This ROM from PDAMobiz probably has specific instalator, which go around CID lock. About your questions:
1) Safety I can not declared. It was only experiment, because I won't pay for unlock, it is same mess as Microsoft and his Windows. But I did this "experiment" today aprox. five times and each time was succesful.
2) Yes, this ROM has same equipment as original HTC ROMs and much more extra. GPS and Wi-Fi are full functional. Only one thing droped out. I didn't find MMS editor in outlook, only e-mail and SMS.
3) I use it only one day so far, so I can offer only short-time and subjective opinion. ROM from PDAMobiz is more agile than original ROMs - it's knowable a lot on first click. It is default in WM6 colors and it has extra software integrated. I like for example good system equaliser, opera browser, overclock software or acrobat reader instead of horrible clearvue.
EazyVG, if you try it please tell me if it worked. Thank you!
I also have a locked CID (can't upgrade from Dutch to English rom) and succesfully upgraded to this version. Mine took only 12 minutes probably 'cause I've overclocked it to 273Mhz and started the upgrade.
Rom
cosinusx said:
Hello,
I own original Artemis P3300 from HTC with locked CID, so I'm not able to install other ROM than original from HTC. Today I try to intsall "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" ROM and I leave it. After aprox. 25 minutes I did soft reset and I was very surprised. Despite CID lock new ROM booted. New system is very nice and more more fast than original HTC ROM and has good software base against original HTC ROM. Is it possible over CID lock? Have someone similar experience? It works really and I don't understandt, but I'm very happy. No money lost and cool ROM is on
----------------------------------------------------------------------------------------------
Sorry about my English, I'm from Czech Republic.
Click to expand...
Click to collapse
WHERE DID YOU GET THE ROM FROM
pdamobiz
I got this ROM on www.pdamobiz.com or on xda-developers FTP. Ther is three versions, Lite, Customized and Powermap. I try to install each, but only Lite and Powermap was succesfuly instaled. Customized ROM freeze on system booting, but activesync stay active, so you can install other ROM.
cosinusx said:
I got this ROM on www.pdamobiz.com or on xda-developers FTP. Ther is three versions, Lite, Customized and Powermap. I try to install each, but only Lite and Powermap was succesfuly instaled. Customized ROM freeze on system booting, but activesync stay active, so you can install other ROM.
Click to expand...
Click to collapse
DID YOU PERFORM ANYTHING SPECIAL IN YOUR UPGRADE PROCESS or DID YOU CARRY IT OUT AS NORMAL.
The powermap version is an .exe file. After connecting it with activesync i just doubleclick on it. Then after 'bout 12 minutes it told me to hard reset the device and then I got the powermap version.
My advance
I download pdamobiz ROM and unpack it by the winrar, after that I connected device to PC and established connection over activesync. Then i run "UpgradeRom_P800W.bat" and left it works.
cosinusx said:
I download pdamobiz ROM and unpack it by the winrar, after that I connected device to PC and established connection over activesync. Then i run "UpgradeRom_P800W.bat" and left it works.
Click to expand...
Click to collapse
OPPS - TRIED THIS - UNIT NOW STUCK IN RE-BOOT MODE...........HELP
pda23 - your caps lock key is stuck on
Recover
Press and hold voice record button and press reset. Bootloader will appear. Now you can plug USB cable and flash up original HTC ROM.
Can you let me know what are the new features in this rom compared to the old one?
I have the standard dutch T-mobile ROM
Is there someone from Holland that has installed this one? Did it solve some of the problems with being unreachable?
OK, today I decided to flash the Dopod PowerMap 1.1.2 ROM to my HTC Artemis which was supplied with Russian
Official ROM. The phone is CID locked as I was unable to flash any other ROM, but this one did.
I did it on Vista using new Windows Mobile Device Center. Once connected and partnership established, I launched
the .exe file (ROM) and waited for around 15-17 minutes until I saw "Flashed successfully .... do a Hard-Reset".
Waited for another 30 seconds and did hard-reset. Once the screen with option for formatting came up, waited
another 30 sec and pressed the green/call button.
What can I say about this, at last in English, ROM. I am very happy. Some things noticed in first few minutes of
use:
ROM version: 1.28.0.0 WWE [1.12.411.1 RUS]
ROM date: 11/06/06 [9/12/06]
Radio version: 02.67.90 [same as old one]
Protocol version: 4.1.13.28 [same as old]
OS: 5.1.342 (15096.3.0.1) [5.1.342 (15096.3.0.0)]
1. The bootloader screen remains the same!
2. AKU is now 3.01
3. I have around 38.5MB of free storage from 42.55 total (cooool)
4. Adobe Acrobat LE 2 is there instead of pathetic ClearVue PDF plus PowerPoint Mobile (didn't have it before)
5. HTC Apps - HTC Task Manager 1.0, HTC GIF Animation, HTC Audio Manager 1.0 (player), HTC Voice Recorder 1.0,
Media Hub (cool one and integrated with the rest supplied multimedia apps) .... all these were not there with RUS Rom
6. Applications included: GB-Soft Tweak (in settings menu), Opera, Audio Booster, GPS Viewer 1.5, GSFinder+, Jeyo SMS Backup 1.1, NoteM (Voice note recorder), OmapClock 0.2, PHM TrayLaunch, PowerMap G10 (without map), BurnOak Radio Scheduler 01.00.01, TRE 0.90 (registry editor), Voice Speed Dial (Cyberon 1.1 b.507271), vxUtility 1.6.2, WM5torage 1.73
7. Input Methods - Keyboard, Block Recognizer, Letter Recognizer, Transcriber (English Only)
8. Color scheme is of that Crossbow
It is amazing that with all these apps there I have ~38MB free storage memory as I prefer to have critical apps installed in main memery, plus my 1GB for the rest.
The next thing would be to unlock ext_rom and take out what I don't need, like PowerMap G10 and few other apps, to have extra few MBs (if possible).
Compared to my previous shipped ROM this one also feels snappier and cooler. I think I am gonna stick with this
one and wait now for ROM which features higher AKU version, with flashing option without CID unlocking. Running
Crossbow is still what I am dreaming off on this device.
As of now cannot say anything about SD card problem, but WiFi and GPS are working nicely.
IPL, SPL and Radio versions have remained same for me with the old Bootloader screen ---- think it is cause bootloader is locked .... any clues on this issue? Or should I try flashing again but this time with bootloader screen only loaded!
Where to download?
Any other download sites for the 1.1.2 PowerMap rom because the PDAMobiz site is painfully slow?
It is here on xda-dev @
ftp://xda:[email protected]/Arte....2_PowerMap.exe
Or get from here (rar files):
http://4pda.ru/forum/index.php?showtopic=28500&st=60&#entry589462
Hello,
I have a DUTCH MDA III compact AKA P3300.
IPL 1.13.0001
SPL 1.13.0000
GSM 024990
OS 1.13.0000
It is SIM locked, can I update using this ROM? Next question, what will I gain, and what will I lose?
Hello
I have the xda Orbit, can I use the PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe
without Problems? What does the excactly the ROM will do with the Phone?
Is my Germany WM5 still on it?
hi all,
is there a know issue with HTC Artemis regarding WM6.1 ROM (Artemis_Touch_4.02_Full_with_4_sided_cube)?
every time I have to restart my HTC Artemis at least 3 times per day.
any ideas or commenst are welcome!
ForumKa
ive been using that rom for a while now on my xda orbit and ive had no such issues
Yes, me too. I move back to v4.01
No issues with me too. This artemis touch baby is working just fine.
maybe you should try hard reset
take backup and hard reset the phone
what is cube how it works ..can any 1 help me
Try to reflash. Sometimes a few files don't transfer the right way at first flashing. Try to flash ones again, I've never had problems with touch 4.02 (with or without cube) with radio 3.21.90. It's really stable!
Good luck.
I have the same... did you found a sollution?
I uses P3300 and the same ROM.
thanx thanx
Dear experts,
since a long time now I'm reading this forum and got many fantastic tipps, ROMs, etc. Unfortunately since yesterday my HTC Touch Cruise's (P3650) touchscreen doesn't react any more. Even hard reset, trying several ROMs (til yesterday I used M-Anime for more than 6 month without any problems), nothing could solve this problem
Therefore I need to send back the HTC to my distributor. However I've to restore original ROM & SPL. Before updating to M-Anime I made a copy of my ROM as suggested, but unfortunately in the meantime all my PC data were lost. So no ROM and even more no SPL. My last hope is this great forum!
To go back to original status I need IMHO following things:
If possible a short description of necessary steps
Original WM 6.0 GERMAN ROM (Version: Bought my HTC in March 2008 / Orginal HTC - no branding)
Original SPL (have installed Hard-SPL at the moment)
Everything what I forgot so far
Many thanks for your help & support in advance,
cheers
ToBe76
PS. I tried to read all threads regarding original rom, but either it's not the correct version or the download link is down ...
hi
direkt von HTC > WM 6.1
oder http://rapidshare.com/files/1499142....0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
reko
Hey Reko,
thanks for your prompt answer. Thought that this upgrade needs original WM 6.0 ROM ... nevertheless installation worked and I've the original HTC WM 6.1 installed now. In this regard one question, just to clarify. The HTC WM 6.1 is an official release and therfore guarantee keeps untouched, right?
And second thing, now I've to restore the original SPL, I tried to check all relevant threads, but I'm still not sure what to do and where to get it. Could anyone help?
Again many thanks for your support,
cheers
ToBe76
1. flash the spl-restore and verify manually in bootloader if the SPL 1.25.xx got flashed
2. flash again the wm6.1 because it has newer SPL than the SPL-restored
if that fails..
1. flash wm6.0 rom + radiorom
2. flash spl-restore
3. keep it as is, or update wm6.1
Hi c3ro,
thanks for your support. Will try do follow your steps and in case of further problems get back.
Thx & cheers
ToBe76
hi is there anyway that i can dump the o2 rom from one of my other company phones? i updated my o2 rom to wwe 1.48 5 days ago and since as a result have had the phone randomly freeze, as in just will not power on, i have to reset the phone then it works fine for maybe day to day and half, if i could get the o2 rom could put back and see how it goes as my other 2 engineers have had no probs with o2 1.43 rom
You could try the official HTC 1.43 ROM instead of the O2 version. At least then you wont have all the O2 stuff and disabled wifi router
http://forum.xda-developers.com/showthread.php?t=577717
True, but with the o2 rom, a few of the bugs people have mentioned in launch roms are not there. I.E. notification led is fine, no spelling mistakes and so on.
Mine is 1.43.206.4
Count me in too if someone can obtain an official O2 Rom
I don't think there is any way to dump a rom to use on another phone as the digital signature is lost