Hello,
I own original Artemis P3300 from HTC with locked CID, so I'm not able to install other ROM than original from HTC. Today I try to intsall "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" ROM and I leave it. After aprox. 25 minutes I did soft reset and I was very surprised. Despite CID lock new ROM booted. New system is very nice and more more fast than original HTC ROM and has good software base against original HTC ROM. Is it possible over CID lock? Have someone similar experience? It works really and I don't understandt, but I'm very happy. No money lost and cool ROM is on
----------------------------------------------------------------------------------------------
Sorry about my English, I'm from Czech Republic.
Wow ... that is isteresting. I have also tried several ROMs, as I have Russian on my P3300 and want english, and above all my device is also CID locked.
You sure that yours was locked, cause if so I will also try then to flash this ROM, but few questions:
1. Safe to flash this ROM (as name implies it is for Dopod machines) on HTC Artmeis
2. Does this ROM support GPS.
3. How does it compare to WWE shipped ROM from Artemis
EazyVG said:
Wow ... that is isteresting. I have also tried several ROMs, as I have Russian on my P3300 and want english, and above all my device is also CID locked.
You sure that yours was locked, cause if so I will also try then to flash this ROM, but few questions:
1. Safe to flash this ROM (as name implies it is for Dopod machines) on HTC Artmeis
2. Does this ROM support GPS.
3. How does it compare to WWE shipped ROM from Artemis
Click to expand...
Click to collapse
Good evening,
yes my device is CID locked on 200%. When I try to install other ROM, for example "ARTE DOPODAU 1.25.707.02 026990 WWE SHIP" it ends same as before this "experiment" = "BAD VENDOR ID". This ROM from PDAMobiz probably has specific instalator, which go around CID lock. About your questions:
1) Safety I can not declared. It was only experiment, because I won't pay for unlock, it is same mess as Microsoft and his Windows. But I did this "experiment" today aprox. five times and each time was succesful.
2) Yes, this ROM has same equipment as original HTC ROMs and much more extra. GPS and Wi-Fi are full functional. Only one thing droped out. I didn't find MMS editor in outlook, only e-mail and SMS.
3) I use it only one day so far, so I can offer only short-time and subjective opinion. ROM from PDAMobiz is more agile than original ROMs - it's knowable a lot on first click. It is default in WM6 colors and it has extra software integrated. I like for example good system equaliser, opera browser, overclock software or acrobat reader instead of horrible clearvue.
EazyVG, if you try it please tell me if it worked. Thank you!
I also have a locked CID (can't upgrade from Dutch to English rom) and succesfully upgraded to this version. Mine took only 12 minutes probably 'cause I've overclocked it to 273Mhz and started the upgrade.
Rom
cosinusx said:
Hello,
I own original Artemis P3300 from HTC with locked CID, so I'm not able to install other ROM than original from HTC. Today I try to intsall "PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap" ROM and I leave it. After aprox. 25 minutes I did soft reset and I was very surprised. Despite CID lock new ROM booted. New system is very nice and more more fast than original HTC ROM and has good software base against original HTC ROM. Is it possible over CID lock? Have someone similar experience? It works really and I don't understandt, but I'm very happy. No money lost and cool ROM is on
----------------------------------------------------------------------------------------------
Sorry about my English, I'm from Czech Republic.
Click to expand...
Click to collapse
WHERE DID YOU GET THE ROM FROM
pdamobiz
I got this ROM on www.pdamobiz.com or on xda-developers FTP. Ther is three versions, Lite, Customized and Powermap. I try to install each, but only Lite and Powermap was succesfuly instaled. Customized ROM freeze on system booting, but activesync stay active, so you can install other ROM.
cosinusx said:
I got this ROM on www.pdamobiz.com or on xda-developers FTP. Ther is three versions, Lite, Customized and Powermap. I try to install each, but only Lite and Powermap was succesfuly instaled. Customized ROM freeze on system booting, but activesync stay active, so you can install other ROM.
Click to expand...
Click to collapse
DID YOU PERFORM ANYTHING SPECIAL IN YOUR UPGRADE PROCESS or DID YOU CARRY IT OUT AS NORMAL.
The powermap version is an .exe file. After connecting it with activesync i just doubleclick on it. Then after 'bout 12 minutes it told me to hard reset the device and then I got the powermap version.
My advance
I download pdamobiz ROM and unpack it by the winrar, after that I connected device to PC and established connection over activesync. Then i run "UpgradeRom_P800W.bat" and left it works.
cosinusx said:
I download pdamobiz ROM and unpack it by the winrar, after that I connected device to PC and established connection over activesync. Then i run "UpgradeRom_P800W.bat" and left it works.
Click to expand...
Click to collapse
OPPS - TRIED THIS - UNIT NOW STUCK IN RE-BOOT MODE...........HELP
pda23 - your caps lock key is stuck on
Recover
Press and hold voice record button and press reset. Bootloader will appear. Now you can plug USB cable and flash up original HTC ROM.
Can you let me know what are the new features in this rom compared to the old one?
I have the standard dutch T-mobile ROM
Is there someone from Holland that has installed this one? Did it solve some of the problems with being unreachable?
OK, today I decided to flash the Dopod PowerMap 1.1.2 ROM to my HTC Artemis which was supplied with Russian
Official ROM. The phone is CID locked as I was unable to flash any other ROM, but this one did.
I did it on Vista using new Windows Mobile Device Center. Once connected and partnership established, I launched
the .exe file (ROM) and waited for around 15-17 minutes until I saw "Flashed successfully .... do a Hard-Reset".
Waited for another 30 seconds and did hard-reset. Once the screen with option for formatting came up, waited
another 30 sec and pressed the green/call button.
What can I say about this, at last in English, ROM. I am very happy. Some things noticed in first few minutes of
use:
ROM version: 1.28.0.0 WWE [1.12.411.1 RUS]
ROM date: 11/06/06 [9/12/06]
Radio version: 02.67.90 [same as old one]
Protocol version: 4.1.13.28 [same as old]
OS: 5.1.342 (15096.3.0.1) [5.1.342 (15096.3.0.0)]
1. The bootloader screen remains the same!
2. AKU is now 3.01
3. I have around 38.5MB of free storage from 42.55 total (cooool)
4. Adobe Acrobat LE 2 is there instead of pathetic ClearVue PDF plus PowerPoint Mobile (didn't have it before)
5. HTC Apps - HTC Task Manager 1.0, HTC GIF Animation, HTC Audio Manager 1.0 (player), HTC Voice Recorder 1.0,
Media Hub (cool one and integrated with the rest supplied multimedia apps) .... all these were not there with RUS Rom
6. Applications included: GB-Soft Tweak (in settings menu), Opera, Audio Booster, GPS Viewer 1.5, GSFinder+, Jeyo SMS Backup 1.1, NoteM (Voice note recorder), OmapClock 0.2, PHM TrayLaunch, PowerMap G10 (without map), BurnOak Radio Scheduler 01.00.01, TRE 0.90 (registry editor), Voice Speed Dial (Cyberon 1.1 b.507271), vxUtility 1.6.2, WM5torage 1.73
7. Input Methods - Keyboard, Block Recognizer, Letter Recognizer, Transcriber (English Only)
8. Color scheme is of that Crossbow
It is amazing that with all these apps there I have ~38MB free storage memory as I prefer to have critical apps installed in main memery, plus my 1GB for the rest.
The next thing would be to unlock ext_rom and take out what I don't need, like PowerMap G10 and few other apps, to have extra few MBs (if possible).
Compared to my previous shipped ROM this one also feels snappier and cooler. I think I am gonna stick with this
one and wait now for ROM which features higher AKU version, with flashing option without CID unlocking. Running
Crossbow is still what I am dreaming off on this device.
As of now cannot say anything about SD card problem, but WiFi and GPS are working nicely.
IPL, SPL and Radio versions have remained same for me with the old Bootloader screen ---- think it is cause bootloader is locked .... any clues on this issue? Or should I try flashing again but this time with bootloader screen only loaded!
Where to download?
Any other download sites for the 1.1.2 PowerMap rom because the PDAMobiz site is painfully slow?
It is here on xda-dev @
ftp://xda:[email protected]/Arte....2_PowerMap.exe
Or get from here (rar files):
http://4pda.ru/forum/index.php?showtopic=28500&st=60&#entry589462
Hello,
I have a DUTCH MDA III compact AKA P3300.
IPL 1.13.0001
SPL 1.13.0000
GSM 024990
OS 1.13.0000
It is SIM locked, can I update using this ROM? Next question, what will I gain, and what will I lose?
Hello
I have the xda Orbit, can I use the PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap.exe
without Problems? What does the excactly the ROM will do with the Phone?
Is my Germany WM5 still on it?
Related
Just upgraded to the new rtom, and now it's impossible to go back to my 1.6.7.1.
HELPPP!!!!! ...would be much appreciated
I understand your trouble.
First, download aWizard from the ftp site:
ftp://xda:[email protected]/Wizard/Misc/aWizard-V1_3beta2.zip
From within aWizard, enable RAPI, then run CID Unlock to be safe.
Then download this file:
ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
Run the program and it will downgrade your phone to the following:
ipl and spl: 1.01
gsm: 1.12.10
rom: 1.05.04.12
Once installed you can opt out of the extended rom by reseting after the initial setup. Use the wizard unlocking tool and soft reset. You can then delete and write new files to the extended rom if you like.
This rom works well if you do not need pushmail or run stereo bluetooth. At this point you may upgrade the rom and radio if you like.
Please be aware that the 2.07 radio rom found in the newer os rom does not succesfully mate with a 1.x os rom. I hope this helps.
Best,
DrBig74
http://forum.xda-developers.com/viewtopic.php?t=44116
Just use the nba file for the ROM image you wnat to downgrade to.....
Produced this error , what can I do?
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
Please help?
lvlolvlo said:
http://forum.xda-developers.com/viewtopic.php?t=44116
Just use the nba file for the ROM image you wnat to downgrade to.....
Click to expand...
Click to collapse
Where do I find the .nba file?
hi gepol I downgraded my qtek 9100 after trying test rom use wizard ulocker but choose super cid option. the 1.6.7.1 rom will install then. out of interest why don't you like new rom. I changed back coz sound quality was worse.
meschle said:
hi gepol I downgraded my qtek 9100 after trying test rom use wizard ulocker but choose super cid option. the 1.6.7.1 rom will install then. out of interest why don't you like new rom. I changed back coz sound quality was worse.
Click to expand...
Click to collapse
Hi,
Even worse than it already is? Jeezus... :?
I cannot use because my ROM is a Greek one, and the new one lacks everything Greek until the Greek guys translate it by the end of the month. I was stupid enough to want to test it, without checking about downgrading first.
But I finally made it
the nba file could potentially be found on the ftp site...though i'm not sure...
I have the T-Mobile MDA (US) so before I did any editing I backed up the rom, splash, etc... using aWizard which generated the nba files for the ROM, Radio, splash, etc...
lvlolvlo said:
the nba file could potentially be found on the ftp site...though i'm not sure...
I have the T-Mobile MDA (US) so before I did any editing I backed up the rom, splash, etc... using aWizard which generated the nba files for the ROM, Radio, splash, etc...
Click to expand...
Click to collapse
Thanks
Hi,
sorry if this question was asked but I could not find previous posts.
I would like to try newer ROMs on my Qtek S200, but before I'd like to backup the current, original, ROM (SPL 2.09.0000, Italian OS), just in case.
However, wizBackup (mtty 1.42) refuses to dump the ROM since the phone is not CID unlocked (the error is "You didn't get the proper security level to download a specific image"). AFAIK the only way to CID-unlock the prophet with SPL 2.xx it is to use the downgrade procedure explained elsewhere. However, in this way I would loose the original ROM before I could backup it!
Is there some way to dump the original ROM before downgrading to unlock the device?
ok, I'll ask an easier question, then
anyone has dumped (or knows from where to download) localised Qtek s200 ROMs (especially Italian)? I can find no download area at www.qtekcorp.com
Two people lookin'... indeed :lol:
I'm still having - after 3 months - the same two problems.
Has someone sorted them out ?
Thanks and excuse my bump
looking for the same thing.
I'll end up unlocking and upgrading my S200 without a backup of the original ROM. I doubt Qtek will release any upgrades since the device is quite old now.
It's a shame they did not even release the original rom for download.
So too bad, I'll take the risk and unlock the phone. I'm confident that the imate Italian ROM, though not very new, will work better than the one I have now.
My S200 is 6 months "old", and for the very first three months, it hasn't any support data on pocketdevice site because "too new".
Now is it obsolete and nobody will release anything for such brick ???
What a kind of policy is it ?
Thank you, but I think this is a dead-end policy for QTEK
Bye
Qtek S200 Original .Cab files?
Does anyone have access to the original .cab configuration files that came under the 2.09 Rom Ver. ?????
Trying to remove the Batt. & Comm Manger icon from the base of the screen.
Under the 2.09 version both icons were removed when the unit 1st configures its self and places a batt. icon on the top tool bar.
Not looking to install any additional program that monitors all of these items just want the original config .cabs that perform all of these task.
Please post link or notify via private msg, Thanks
read the wiki
the official and original 2.09 files are on the ftp server....
Jesterz said:
read the wiki
the official and original 2.09 files are on the ftp server....
Click to expand...
Click to collapse
Also in Spanish language????
Annita
Has anyone managed to successfully upgrade or change rom?
If yes, what rom did you start from and what steps for the upgrade/transition?
This will be useful information for all.
THanks,
I'd like to know the same thing. My Orbit came loaded with TMo MDA Compact III ROM instead of O2 ROM. Needless to say I'm a bit peeved. The vendor is trying to fix but I really need the UK or WWE English ROM for O2. Has anyone dumped this ROM?
well,
on the wiki you will find the tmobile uk wwe rom. this is flashable if your machine is cid unlocked-in case it is not(standard) you will get kicked out off the installation by a comment named "wrong ID model" at about 3% of the running routine.
to unlock cid and flash the named rom, afaik the only way is to pay imeicheck.co.uk.
afaik there is no other vendour rom available yet, meaning no chance to fully switch to e.g. O2 etc.
alternatively you can exit the installation prior to extrom installation via a softreset at the 3second count. this not installing your provider cabs, you can then download the various available extrom cabs from the wiki and install them manually by copy and double-tap on your device.
Thormdac,
This is helpful info. Can you help me with this question: I have a greek htc p3300 rom but I would be happy to have the English version. Should I simply prevent ext rom from installing or do I need to change rom? If I need to change rom will I be able to do so or could it be locked to the Greek rom?
Thanks,
dear apap,
language is purely locked to the rom version and has simply nothing whatsover to do with the extrom version cabs you install!!!
in order to change language to english then you have to use a rom stating...."wwe" somewhere in its declaration.wwe=worldwideenglish.
now your machine "htc p3300" is with wireless lan, right? afaik, the tmouk rom has not implemented wlan on my german hero(without wlan!). the community here still isnt sure where the wlan comes from, the chip or the rom. so if i remember correctly and the tmouk rom not having wlan support, but your machine needing it, then once u unlocked cid and install the tmouk rom should end you up not having a functional wlan! in case we suppose wrongly...you are the guinnea-pig...you should have wlan. confusing? well i simply dont know off by heart any more about the uk machines having or not having wlan.
greetz
Helpful once again Thermdoc,
The Greek version does have wlan so I will wait to see if somenoe manages to find a wwe rom that is wlan enabled before experimenting.
cheers, apap
Hello!
I own O2 XDA Mini S.
My IPL version is 1.01
My SPL version is 1.03
OS is Windows Mobile ver 5.0 - OS 5.1.70 (Build 14406.1.1.1)
Am I right that my device is G3?
What you suggest to do with device? Any upgrade of OS?
thanks for any effort
_vlada_
_vlada_ said:
I own O2 XDA Mini S.
My IPL version is 1.01
My SPL version is 1.03
OS is Windows Mobile ver 5.0 - OS 5.1.70 (Build 14406.1.1.1)
Am I right that my device is G3?
What you suggest to do with device? Any upgrade of OS?
Click to expand...
Click to collapse
Based on what you typed, yes this is a G3.
Your best option right now is to read the forums here. Start by reading the stickies at the top of the Wizard Upgrading forum and the Wizard WM6 forum first.
You may just want to download your provider's latest rom (it should be on their website) and just upgrade to that one.
The other option would be to CID Unlock your phone now (since its at IPL/SPL 1.xx already). But again, you need to read to understand what this means and what its for.
mfrazzz said:
You may just want to download your provider's latest rom (it should be on their website) and just upgrade to that one.
Click to expand...
Click to collapse
the newest o2 rom is on my signature
Thanks for support!
Here is what I did (maybe useful for future novices like me ):
I tried to install newer T-Mobile rom MDA_software_update_226102_22610105_022511.exe without success.
Unlocked phone.
Successfuly instaled T-Mobile MDA_software_update_226102_22610105_022511.exe rom so my SPL and IPL went to 2.26. Oppinion: clean, fast WM5 OS.
Installed PDAMobiz_Wizard_WM6_G3_X-Plore_V.1.1_by_Hong. Oppinion: Battery hungry OS with too much options and with Ferrari and Lamborgini themes. Personaly, this OS is for people who like to play with phone. I liked sw for processor clocking. But, battery last few hours.
Installed HTC Wizard WM6 XDA-Dev (by Faria). Oppinion: Very good OS, but I had issues while installing it. Device frozed 2 times. In third try I managed to enter OS, but later found that > Phone setings does not work well. I was unable to close app and I needto restart phone (was not showed in task). Boot screen remain from X Plore by Hong.
Installed HTC Wizard WM6 10.2.0.8 WWE (by mUn) Vanilla Edition (by NotTooSmart). Working great. Clean OS. I needed that one. Default theme is clean. All working without glitch.
I tried to load the german wm6 os.nba another poster provided (using the aWizard tools, which I had previously sucessfully used to load the WWE HTC rom on my Chinese Dopod 858), and currently the device just sits at the logo screen.
I can enter the bootloader, and I can even use the 'official rom updaters' while in the bootloader, unfortunately they all fail at 2% saying 'invalid device id'.
Any advice on how to get my phone running again?
I think if I could find a chinese dopod 858 updater, I could use that to load a proper OS onto the rom, but I can't find one anywhere.
Another option would be to 'more completely' unlock the cid, then I could use the HTC updater... but all the cid unlockers seem to require a working active-sync connection, which I certainly cannot provide from the bootloader screen.
Again, reaching out to the more experienced here to help on this.
thanks
Did you check on www.dopodasia.com for your phone's original ROM updater? Dopod always has the latest ones they've released for each model on their site...
From the other Herald thread (http://forum.xda-developers.com/showthread.php?t=290382), I read that the extracted WM6 German OS.nba was corrupted due to some error in the extraction process. Papamopps has promised to post the OS.nba again, hopefully soon so you could maybe try to flash that version too.
P.S Aiyo? What language is that?
I tried, I'm not able to get an account to their site. When I enter my serial number, I always get an error.
(http://www.dopodasia.com/Dopod_en/member/check.aspx)
Oh, and 'aiyo' is mandarin chinese pinyin for doh, embarrasment, frustration... that sort of thing
Sorry can you tell me where to Download original HTC Updates ?
My Update did not work out, too and i am stuck in Bootloader by now....
i think i can flash the WWE, will try this now !
Here the lastest ship ROM, but I'm not sure you can UP without unlock CID:
http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
mkford said:
Here the lastest ship ROM, but I'm not sure you can UP without unlock CID:
http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Click to expand...
Click to collapse
It wm5 aku3.2. Where to take wm6 wwe?
SOrry - there is no WM6 WWE.
I made a backup with awizard to dump the german ROM of XDA terra (aka herald) - But it was only read from 0 to 58000 - I figured it out - that the os.nba is not completly.
So I deleted the links I provided.
SORRY.
Hope it will work again.
Thanks for the replies, but I think the only updates that will pass the cid lock would be an official update for that phone... specifically, a Dopod C858 sold in mainland China... (ugh). I still haven't found an appropriate updater.