Personal "issue" regarding PDAir Aluminium Case and T-Mobile Vario IV - Touch Pro, Fuze Accessories

Thought id make a post to let anyone thinking of getting a PDair aluminium case for the Vario IV (UK) know about my experience with it.
I Recieved my vario just over a week ago and untill this morning i have kept it completely unblemished.
My black aluminium case arrived through the post this morning and upon inspection seemed to be just what i was looking for. the neoprene within the lower part of the case seemed to hold the phone snugly and the catch was firm, ensuring the case wouldnt open accidently and drop my phone. the one thing i did notice was the lack of neoprene on the upper part of the case (read lid), but after looking at a few pictures on the web and vids on youtube i noticed that this was standard on the case and not an error with mine personally.
So i continued to use it sucessfully, flipping the case open to slide the screen and use my keyboard, untill this evening after about 8 hrs of usage i noticed three deep scratches froming on the side of the screen part of the phone near the volume buttons. however on the lower part of the screen part of the phone, above the usb port a particularly nasty scratch has formed measuring 2cm in length. needless to say I am not happy, as the case i bought to protect my phone has caused this much damage.
I have emailed the supplier, hopefully it may be a fault with my case and that a replacement may work fine, but eitherway i felt it was worthwile reporting this to the community incase it saves someone else from getting their phone wrecked.
BTW anyone know of a way of polishing out the scratches i now have?

the only way i know of is to use an extremely high grit sandpaper or use a buffer.

I also got the PDAir Case and mine has got neoprene in the lid as well! I use it for 2 weeks now and no scratches on my phone.
But I have to admit that I don't use the clip provided with the case but carry it arround in this case: HTC Pouch Case

where did you get your aluminium case? i checked the pdair website and it states the tmobile vario IV case as "coming soon".
As an update, after i fired off a rude email to the store i bought the case from they said that the case i recieved was the wrong one and that the one for the tmobile vario IV isnt out yet, so i sent it back to them and recieved a full refund, which would be fine except the scratches i now have as a momento of that shop.
Think ill buy the case directly from pdair in the states and get it shipped over when they are out, save on alot of trouble

I got mine from ebay. But there are several other shops selling "PDAir" Cases that all look some different... Maybe mine is a fake - a good one ;-)

Related

DAMN!!!, UNIVERSAL BROKEN!!!

I am so upset, i just got my universal on saturday, i have been enjoying it but i could not use it as a phone because i needed to unlock it. I had the damn thing in my pocket and was on a phone call on my other phone in the car, in my front pocket, not back. Got out of the car, walked into the hall and opened it and there it was, A BIG UGLY black gash on the screen, the screen cracked, it just in my pocket!!, closed too! Where can i get this fixed, i am in the states and the phone is not sold here so i don't know here to get it fixed. Please, the LCD liquid has made a dark smere across the left side, i need help, please. Also what is the best case to get, so this does not happen again?
Check Pocket PC Techs. They will replace the screen for you.
how?
Please how do i get to them?
ok
ok, thanks, thats really expensive, ok, what is best case to use for this device?
Broken screen resolution
Ok thank God i don't have to pay over $250 to get my screen fixed. T-mobile Uk agreed to replace it since it was gotten through them. The way this still happened baffels me. I have had my MDA3 for over 6 months and it has fallen about 4 times, and stuff and it still works fine, but the exec screen broke while in my pocket. Strange. My question is that, for people who have an exec, do you leave it in laptop mode or tablet mode most of the time, and have u had to replace yours or do a repair?
Broke my Wizard to, im so damn worried about my universal. Don't got the money over to fix that screen if it's gettin broke, have had almost all pda phones you can get in .se and never cracked any screen but damn qtek ive done it on
I use a krusell case but not because it is the best but because it was the only one available on hand. It cost 29€ here in spain.
Also, I never leave it in tablet mode in my pocket. Always in Laptop mode.
It's only in tablet mode while it's on my desk.
Purchase a metal case. You can keep it in PDA mode and view the screen while inside the case. It also has a belt clip
UD.
Thanks
I pray the second one does not break when it arrives, it is too expensive to fix these things. Can you post a link to the case? i have looked at most of the cases on here, i think i will go with the one for the T-mobile side kick 2, it is cheaper and looks ok. I just need something with a strong belt hook and is well paded, so if it is on my hip and something actually presses on it this time, it will not break.
I must admit , I feel my Unirversal is more vunerable than any other device I have ever owned - can't quit put my finger on why , but I feel as if it wouldn't survive being dropped as well as myXDA, XDAII , s100 , or wizard for that matter !
The XDA / XDAII came with a nice case vertical flip case with a metal plate in the flap - which would be ideal in my eyes , but I have only seen one like that on Ebay for the exec (Via hong kong! ) and I suspect the one you actaully receive may be different (horizontal )
here is the krusell case link:
http://www.krusell.se/product.php?productID=2095&category=7
and here is a metal case link:
http://www.proporta.com/F02/PPF02P05.php?t_id=1355&t_mode=des
hope this helps
I had an XDA 3 and used a metal case. BIG ERROR!
one day the belt clip connector of the case broke and the device fell down, cracking the screen.
For my Mda Pro I ordered one Piel Frama case, which has not only a belt clip but also a fixed belt latch (you can take of original clip and then below) which should not break.
Also this case protects the device from all sides and seems to be thick enough to give it good protection in case of falls.
Details here:
http://www.pielframa.net/prodi.asp?ID=412
case
Replies, thank you all for your reply, i think i will go with a leather case, the metal ones are not attractive. The funny thing is that i just sent the phone back today, now it is gone, and as i got home, i got the unlock code from t-mobile UK!!!. DAMN!! I think i just have a bad luck week.
You can get cheap leather case with all sort of design off Ebay. I got mine from there and the quality is not bad at all
Piel Frama does NOT have a belt clip.
UD.
P.S. Some reviews:
Piel Frama leather case
http://pocketpcdubai.com/i-mate_pielframa/jasjar/review.html
Brando Metal Case
http://pocketpcdubai.com/reviews/brando/metalcases/jasjar/review.html
Proporta Alu-leather case
http://pocketpcdubai.com/reviews/Proporta/cases/jasjar/review.html
@universaldoc
check the link, I posted. I speak about a different Pielframe case. And this one HAS A BELT CLIP.
@BlackICE,
My bad! Thank for you for the correction. I thought you were referring to the standard case.
UD.
Just as an observation, the reason the screen would crack in your pocket would be something sharp hitting it? Could this not be easily solved by always making sure that the side of the HTC with the screen on it always faces towards your leg and not towards the outside? Sounds like an easier option than buying a metal case anyway :?
i usually keep my xda exec in my front pocket ... i'm not really a fan of cases esp. for the htc universals .... somewhat tacky ...
HTC
I had 15 cents in my pocket when it happened but i doubt that had anything to do with, it may have but with the way the coins were, i don't think so. I think maybe cause my knees bent, it stretched my trousers and that caused it (can't stop thinking about that day, ::sob::sob:.
With my MDA3, i always used the case that came with it, i like that, cause the case only holds the device. Thanks for your advice, :wink: i just ordered that ALU-Leather yesterday, but i am thinking it will be uncomfortable answering the phone with that leather all around it. I will see how it works out when it gets here but protection is number one now, i can't keep shipping it back to the UK. To people with cases that house the unit, do you answer the phone with the leather all around the unit or u use bluetooth, or you take it out of the case?

Cingular 8525 housing availablity?

Hi I have a Cingular 8525 and as usual due to my clumsiness I have drop it twice on the cement. Everything's working fine but being a person with a mild case of obsessive compulsive behavior I am buggin......
Also if you guys are looking for a case for your Hermes you should try to avoid this style. My 8525 was securely in this case and the phone 'flew' out of it when it was knocked on the front side of the case. The phone flew out knocking the battery boor, battery, and the sim right out of the phone. Not good! Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
I have tried ebay for a replacement case and unlike all my other phone nothing is available and I mean nothing. Not even one cheesy knock off is on there for this phone.
Has anyone here looked into getting an OEM housing for the 8525?
Personally I would prefer to keep the phone in a 8525 case versus changing it out for other verients.
Sorry for the long post.....I'm sick in bed with a 103 fever so I figure that I would bug u guys
Thanks.
Derek
Looking for same for TyTN
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
try this
checkout this site. it has pretty much everything that is available.
you might want to invest in the hard metal case : )
http://www.thepocketsolution.com/cingular_8525_accessories.html
armedmetallica said:
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
Click to expand...
Click to collapse
Did you happen to adjust the hinge(simply by bending it inward slightly) before placing your Hermes inside. I have an aluminum case, and I've test dropped it, and nothing happened.
***Please not from the factory, the hinge merely "clips" over/on the other side of the aluminum housing. If you want to make it more stable you have to slightly bend the "lip" that connects to the lower portion of the housing. YMMV. I had to readjust mine once as the first time I had it way too tight, and it was very hard to get my Hermes out of the case. Now it simply closes with an authoritative click, and I know my Hermes is secure.
Anybody find a place to get the housing for an 8525 yet? There is a large (its not that large, but its visible enough to be annoying) gash on the metal bezel running along 3 of the 4 sides of the display of my 8525
im new to the forums, but my 8525 got knocked out of my hand and got pretty messed up. my "t" key has also started to lift off of the pad. i wanted to know if this has happened to anybody and if there is any replacement keyboards for sale also. can i swithc over to the tytn with the proper front keyboard? any help would be amazing.
i just bought a dummy 8525 off of ebay, Im not sure how they are made, but I am going to see if I can switch the housing
please let me know how it works, i was thinking of doing the same thing...
itlynstalyn said:
please let me know how it works, i was thinking of doing the same thing...
Click to expand...
Click to collapse
The dummy thing did not work, it isnt an actual housing, only the front buttons work, the rest are fake and do not move, there isnt even a real battery cover, its one piece. That was a waste of $10.99
still really desperate to get a new housing, anyone know where one is available?
http://cgi.ebay.ie/OEM-Housing-for-...temZ260100290172QQcategoryZ3728QQcmdZViewItem
Well let me add that I am not the seller. so don't ask me any questions, but this is a seller I have bought housing for my imate jam before...
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
BSoD_leet said:
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
Click to expand...
Click to collapse
If should be ok, but you wont have the power button on the right side... ahahhahah it would jzu be a 8525 hahah
Why dont you juz get this one instead... tho
http://cgi.ebay.ie/For-O2-Trion-iMa...ryZ15039QQrdZ1QQssPageNameZWD2VQQcmdZViewItem
armedmetallica said:
purchased invisible skin
Click to expand...
Click to collapse
armedmetallica, where did you purchase the skin from? could you please PM me, thanks!
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
http://cnn.cn/shop/tytn-grey-housing-p-1295.html
There you go guys.. I dropped my phone before christmas, and broke the latch that holds the battery door on, and I had to use some tape for awhile. I must have ordered one of the last Cingular 8525 cases, since all they have is the HTC Hermes black cases with the front camera hole.
That shouldnt be too big of deal to you guys though looking for new cases. It took about a week and a half to get here (FL, USA) from Hong Kong at Christmas time. Very good site..
spanky310 said:
Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
Click to expand...
Click to collapse
I use a case with magnetic closure..............I put the device into the case with the screen facing away from the magnet and I have never had any issue with it.
http://www.gsm4world.us/shop/cingular-8525-8525-c-210_276.html
55 bucks and your back in business
I am having the same problem sourcing the correct housing for my phone. I am from the UK and have searched high and low to find a housing for the UK equivalent the SPV M3100 (HERM100 - so the label says).
I have checked all the sites mentioned above, at cnn.cn they dont have the correct housing as the front buttons are different? and the cingular housing is 1: not a nice colour! and 2:L i dont know if this includes the mid plate as well.
Does anyone know where i can get hold of the correct housing(not silver) i dont mind the branding.

Scratches on Athena body

Hello,
i want to change my Ameo in a new one because there are a lot of scratches on the front body. The reason is that the keyboard slipping on the surface of the body.
If any one have the same problem please Post it here because i want to show T- Mobile that this is a failure of construction.
Mine is exactly the same, I tried to take a picture, but it wasnt comming out very well, I was quite annoyed because I tried to keep it good. Does anybody know if this happens with the black ones or is it just silver. mine isnt insured and T-Mobile wouldnt entertain me for insurance because it was 3 months old. though I have heard you can insure it online somewhere.
i've got the same kind of scratches at exactly the same positions.
but i don't think t-mobile will do anything about this
i'ts a normal sign of use
I have some scratches as well, fairly similar to yours. I'll have some pics made if I can get a hold of a good enough camera.
I have a scratch at the bottom of the screen surround. The keyboard clear top has a tiny bump on it (from where it was moulded i think) and this has scratched the case! If it had a decent leather case then it wouldnt happen!
Same here, Same scratches, same area..
Guess we need to find a decent case to carry our precious around in...
Something that has some padding between the 2 parts.
Mine doesn't have this problem. Not a single scratch at all. It still look brand new. I don't use the keyboard or the leather case though. I just carry mine "naked" with my DIY belt pouch. I just have the standard free plastic screen protector over the screen area only and not the body.
This is ironic. The keyboard is supposed to protect but does the opposite.
eaglesteve said:
This is ironic. The keyboard is supposed to protect but does the opposite.
Click to expand...
Click to collapse
It definetely does protect (the screen from cracks).
And imho some scratches on the body of the ameo are much better than a cracked screen
You now, we are speaking about a 800€ all in one device? Such a failure must not happen. If you had a 800€ Notebook with the same problem you would complaine about.
This is what my U1000 looks like close to the VGA camera on the front.
There are 2 more areas where I have some damage but I can't capture it properly on camera.
This is why we should take out insurance on our most expensive phones, as i hate scratches on my phones and if you complain about it with your provider/supplier and they are not willing to replace it when its a manufacture defect then i would personally claim on my insurance QUOTE (MY PHONE IS LOST/STOLEN TO GET BACK A REPLACEMENT) Its too expensive a device for it to scratch so easily.
I have the black HTC Advantage and I have the scratches too.
I have the black Athena and barely any scratches on mine. I use the stock case. The only time I got it scratched is when I first got it because I tried to use it without the case. Mistake on my part.
If you search the forum, you can also buy a $25 solution that protects your entire Athena. It's a plastic transparent covering that protects the entire body of the device. I think I may have posted it in the past to the accessories area. Well worth the tiny investment to protect the looks of your device.
Yep, I have the Black HTC Advantage X7500 and I have no scratches on it. I also do carry naked in my pocket especially around the office to meetings. However, I do feel I need something to protect it without gaining the bulk. I am still looking for a belt clip to carry it.
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Looks Intresting.. But we all know that these type of solution are never as easy to install (Esp. as there are 8 pieces for the Athena)
as they are in the Promo vidz. The vidz also mention that the film has Adhesive on it. How would this affect the deve by:
1. Discoloring over time
2. Being able to easily remove the film, if need or if damaged.
3. Being removed from the screen, without pulling the touchscreen's
touch sensor film off.
Has anybody tried this stuff yet? I think I'll wait for more feedback before I buy.
http://mobilitytoday.com/articles/invisible_shield_protection.html
From some of comments, it seems easy to remove from a pda.
I don't know if that comment was from someone who works for ShieldZone though.
Staroip said:
Just found this product.
http://www.shieldzone.com/item_description/HTCX7500.html
Read good review on PocketPCThoughts for a different product.
Has anyone tried it? It states as full body shield which includes guards for keyboard as well.
Click to expand...
Click to collapse
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
ltxda said:
I just ordered one. I'm having it shipped via 3 day UPS. I'll post my thoughts once I try it out. For the cost it's worth a try. They also have a lifetime replacement policy so if they get screwed up you get a free one. We'll see how it goes.
Click to expand...
Click to collapse
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
lpsi2000 said:
I will wait for your feedback before I try one. It seems to be right thing to have with this device but I am not sure yet.
Click to expand...
Click to collapse
I have it on for over 4 months. Search this very forum for an extensive discussion on it. Easy to install with the water spray bottle provided. The screen protector is a bit sticky so I took it off and used a regular one.
Don't ask any more questions. Just search for the original thread here
Here
http://forum.xda-developers.com/showthread.php?t=298808

Seidio Innocase (Black) $24.85 SHIPPED

emobileinhand.com has teamed up with Amazon and they're selling the Seidio Innocase for $24.85 shipped. I added Priority shipping and the total was $26.85. I bought my first Innocase from them but I got wasted on St. Patricks Day and broke it. The phone is fine, thank God.
The Seidio Innocase is hands down, THE BEST case for the Kaiser. The holster (strongly recommended) really keeps the device safe.
Right now, I'm using my Boxwave as a backup. I like it, but the belt clip forces you to wear it with the screen facing out which could lead to damage.
This is a great deal.
http://emobile-in-hand.amazonwebstore.com/search.htm?keyword=B0012Y4IQA
I have this case and imo its overpriced crap. The thing rarely stays on all the way. It seems there's always a corner or something to press down on again to get it to stay on it.
If you want a nice case cheap, just buy a cheapy. I bought one off Amazon for less than $5 and it stays on all the time never have to worry about it at all. The only difference is the holster and finish. The Seido has a nicer feel to it due some coating they put on it. And the holster for the cheapy is one of those screw on job's.
But hey if you want to spend $20 on a coating for something that will fall off, go ahead its on sale!!
Satisfied
I've used it for 2 weeks now and it stays on, feels great on hand, and haven't found any peeling of the rubberized layer.
I used to put on PDAir Aluminium for my SE M600 and it also go roughed up. So you can imagine my usage habit and this Seidio performs beyond my expectation.
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly. The boxwave is a very close second though. I wish Boxwave had a holster similar to Seidio's.
The great thing about the Boxwave is that it has a "notch" for the reset hole so it's almost impossible to miss and end up messing up your USB port.
-haze- said:
Yea, I dunno man, I never have had a problem with my Seidio. You just have to make sure you have it on correctly.
Click to expand...
Click to collapse
I don't know how someone could fit it on incorrectly. It only goes on one way and its pretty obvious which way that is.
My biggest problem w/the case is that if i slide that keyboard out it will knock off the bottom hinges.
IMO its not a secure case. Is it designed well as far as all the little notches and slots? Yes. Does it feel nice in your hand? Yes. Does it look nice? Yes. Is it worth more than $5? No.
Is this really much different to the 'crystal cases' that you can buy from the markets and crack after a week in your pocket?
Dont u dare!
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Thanks for your feedback paradoox,
anyone else have similar long term reports?
On a separate note, i found out that Boxwave do a very similar (nearly identical) case and holster. Anyone handled both the Seidio and Boxwave for a comparison?
yep thats pretty much what i thought
paradoox said:
Dont even think about buying this pathetic case. after much debate i bought this hoping it would protect my kaiser. i spent a week looking for the perfect case, went through everything i could find. i received the case, it snapped on easily, i hardly had an issue with the little hinges, the case lasted me a good 18 months. the rubberised outside is a nice touch, imo the phone doesnt look good with the case, but i stuck with it coz it protects your phone, right? well not quite. what the assholes at seidio dont tell you is that yeah they've rubberised the outside but done nothing inside the case. its plastic, which means after a couple of months you start to accumulate **** inbetween the case and the outside of the fone. ordinarily it might not be a problem, but if like me the fone spends most of its time in the back pocket, in bags etc then any grainy kind of crap between a plastic cover and a kaiser = ? you guessed it, major dents, scratches, gouges etc. i didnt check the phone for a good 3 months after i put the cover on, when i took it back off my phone looked like id rolled it down a hill and then threw it back up again. its ruined my kaiser and now i cant sell it on unless i buy another housing and put it on myself. it may be error on my part assuming that a protective case protects the outside of your fone, i dont know. this is my experience of this ****ty case, take it or leave. i think you'd be better off buying the cheapy crystal ones, coz then atleast you can see when your phone needs cleaning and you dont end up ruining it.
sorry for going on and on.
paradoox
Click to expand...
Click to collapse
I had a similar experience as paradoox, bought it, thought it looked crap but left it on to protect fone, few weeks later discovered one of the little little tabs holding the top half of the case on snapped so it wouldn't stay on.. this is when i found scratches and dents under the case too. imo ... the case is just too expensive for how it performs... better to go thu 3 cheapies i think..
It all depends on your usage and carry habit.
I carry my phone on a leather pouch on my belt, with the Seidio snuggly fit on it, so it won't slip whatsoever.
It does make sense that some grits, etc. will get under the case, but I just opened it up 1-2 weeks ago and found nothing. Remember, I live in Jakarta, taking public buses and lots of fumes, dust, etc. around the air.
Of course it has to be also counted that I rarely open my phone in public (dusty, windy area) mainly for security reasons. I don't flaunt my belongings. I worked in an office building, and the phone is often out, but it's a clean environment.
Again, YMMV. For someone who wants no dust, I read somewhere there's a waterproof case for Kaiser ..
For my use, Seidio works great.

Touch HD + Gravity = Worst Combination

Hello everyone
To cut a long story short my Touch HD fell on the floor (on concrete) screen first and took a beating.
The back cover came out, and so did the stylus and memory card. But amazingly, the screen was fine and the whole phone is fine. Except for the severly scuffed housing around the screen....
Now I want to take the phone to HTC and let them replace the housing (digitizer is fine).
I've sent an email to HTC about it (its my first experience with HTC customer support), but if I have to send the phone to them would I have to remove HardSPL and the touch hd generic ROM, and put on the Orange ROM? (My phone was bought brand new off eBay, and it is Orange however unlocked)
Its obvious that the software on the phone is perfectly fine and this is a hardware issue..
Cheers... typical for me that the most expensive and best looking phone gets damaged! Gggrrr...
I don't even know whether they will repair it for free, as it is obviously your fault (sorry for that).
The HTC support isn't that fair at all, you should read this and/or that.
I just got a reply from HTC, they say its going to cost about £60-£70 considering its not covered under warrentee (which is fair enough since I dropped it)
To be on the safe side I am going to flash the original Orange ROM and remove HardSPL.
yeah.. f***g gravity!!
2 weeks before i received my HD i had the same infortunate lucky. My device crashed over floor. It seems my rigth side screen is a biiit deeper than left but all works fine. It´s really ennoying to live with this permanent afraid that our device fall again..
Fk
Therefore, there's an invention called PDAir aluminum cases. Makes your HD less compact, however, it's the best protection you can get against external impacts. My HD already fell on the floor thrice, pure accidents with quite scary distances to the floor, but luckily nothing happened.
I'm using a leather case from the supplier called noreve, www.noreve.com, this is the best leather case that i came across till now. but again as what Georgeous said, it will become less compact..... so its your call to choose , cosmetic or protection =)
you can also op for Invisible Shield by Zagg, but it not easy to apply to you phone thoui, i tried to apply some thing similar by Bodyguardz, i faileed.. now i'm back to Noreve leather casing

Categories

Resources