dopod 838 pro keyboard problem(help) - 8525, TyTN, MDA Vario II, JasJam General

guys can somebody help me with my dopod 838pro when ever i use the keyboard the fone always shutsdown dont know why i just upgrade it to wm6!!!! what should i do!!!!! please need help badly!!!

p.s. and my herms sometimes crashes with out prior notice mmmmmmm

jromep07 said:
p.s. and my herms sometimes crashes with out prior notice mmmmmmm
Click to expand...
Click to collapse
When you say it shuts down, do you mean it goes completely off and when you start it again it goes through the boot up process?
.. and when it crashes do you mean it freezes, or the screen goes blank or it turns off?
Did this happen immediately following the upgrade? I'm trying to decide whether this is physical or software related.
Mike

mike
thanks for the reply! yes it goes completely off and when you start it again it goes through the boot up process! and about the crushes yes it turns my fone off it doesn't freezes it just turn off!!!! if its a program related what should i do or if its a hardware what should i do!!!! i never notice this problem before! tnx!!!

jromep07 said:
mike
thanks for the reply! yes it goes completely off and when you start it again it goes through the boot up process! and about the crushes yes it turns my fone off it doesn't freezes it just turn off!!!! if its a program related what should i do or if its a hardware what should i do!!!! i never notice this problem before! tnx!!!
Click to expand...
Click to collapse
Have a look here. I think it may be this. Opening the keyboard may be causing enough movement to momentarily disconnect the battery. At other times it will just be random. If it stays on when left to sit without any movement then this is likely to be your problem:
http://forum.xda-developers.com/showpost.php?p=2451075&postcount=4
Mike

mike
tnx ill gonna give it a try! hope it works! ill inform you if its successful! tnx again!

and can i ask another question? can i use the at&t3.62.502.3 wm6 rom on my dopod coz its newer than the dopod update! tnx

mike
tnxs alot i think it works i have using my keyboard for about 40mins and it doesn't shutoff any more!!! tnx a million!

Related

Power button not always working.

This JasJar I have Always have problem waking up after period of inactivity. If I had it powered off for too long, I cannot bring it back to life with any hardware button, except the reset. Usually I can still see the green light flashing indicating the phone in on and working. But I had also tried to call it, but it won't ring. As a PDA the problem wouldn't bother me too much, but as a Smartphone it mean I might have missed a few important calls
the only solution i have now is i go to settings, power, advanced and i disable the "turn off device if not use for" option
it works all the time with me but it eats the battery, specially if i am connecting my BT headset
Please if anyone has a solution let me know
thanks
i forgot to say that it happens even if i take the SIM card out of the device, so i do not think it is a SIM card issue
i do not have and SD cards
Any Help?
it happens randomly with no specific reason, but I tend to believe it's due to a third party s/w. If you made a hard reset and kept using the device with only the standard applications, the device will be very stable except the bluetooth issues.
The issue of the PPC power button, whatever a soft one or a hard one, has been consistently existed since I bought my first PPC with PPC2000. I am so disappointed that it is exactly the same case after some 6 years...
It is usually due to some imcompatibility between the system and some today-enhancing add-ons, which seem necessary for us but sometimes however causing problems like a deep snooze...
thanks for ur answers, actually i do not think it is related to 3rd party applications on today screen plugins, since i already had reflashed my device and i am running now with no applications installed, i am not sure what Phono can do for me i will try to contact them today and see if i can get a replacement or what?
yet any other ideas will be really appreciated
Same problem in my device can any one help me Please
Hey, I had this problem too...
The only way I stopped my PDA from freezing like this was to disable the auto power off feature in Settings/System/Power and keep the backlight turned on (but lower without it plugged in) Settings/System/Backlight.
This helps with other bits too, makes the delay in the unit from ringing less and connection time faster.
Regards.
Dave.
jmdrizen said:
Hey, I had this problem too...
The only way I stopped my PDA from freezing like this was to disable the auto power off feature in Settings/System/Power and keep the backlight turned on (but lower without it plugged in) Settings/System/Backlight.
This helps with other bits too, makes the delay in the unit from ringing less and connection time faster.
Regards.
Dave.
Click to expand...
Click to collapse
Thanks dear .. I will tray it I hope it will fix this problem.
jmdrizen said:
Hey, I had this problem too...
The only way I stopped my PDA from freezing like this was to disable the auto power off feature in Settings/System/Power and keep the backlight turned on (but lower without it plugged in) Settings/System/Backlight.
This helps with other bits too, makes the delay in the unit from ringing less and connection time faster.
Regards.
Dave.
Click to expand...
Click to collapse
Did any experts here got a solution to this? I really don't know why it happened.. I am using MDA from T-Mobile..
still no solution !!
a small update here, i've noticed that this problem does not happen if i am connecting my universal to the power charger, it only happenes if it works on battery, maybe there is sensor or so needs to be replaced ..!!
i am wondering, is it a hardware problem?
do i have to replace my universal ?? or maybe there is something to do with the software or bootloader?
SomeOneCares said:
still no solution !!
a small update here, i've noticed that this problem does not happen if i am connecting my universal to the power charger, it only happenes if it works on battery, maybe there is sensor or so needs to be replaced ..!!
i am wondering, is it a hardware problem?
do i have to replace my universal ?? or maybe there is something to do with the software or bootloader?
Click to expand...
Click to collapse
Um.. Today i tried to "tick off" the battery off option under the "System" page.. it works fine for the entire day.. And battery eats up is just normal. Anyway.. I think it's related to some software conflict of resources but not hardware.. um.. at least, this is one of the solution!
UP
SomeOneCares said:
still no solution !!
a small update here, i've noticed that this problem does not happen if i am connecting my universal to the power charger, it only happenes if it works on battery, maybe there is sensor or so needs to be replaced ..!!
i am wondering, is it a hardware problem?
do i have to replace my universal ?? or maybe there is something to do with the software or bootloader?
Click to expand...
Click to collapse
any solution

Hermes stop responding after few minutes

Hi!
I can`t find any topic like this...
1.My Hermes is stop responding aftr few minutes when I`m not using it. (Touch screen and hardware buton alsow are not working.
Only way to get it working back is reset using a stylus.
Leds`s are alsow stop flashing.
2. When scereen is "on" I hear silent beeeeeee....... - is this normal?
I have try to put few different ROM`s on it, but problem is still the same.
Can anybody help me to sort it?
Thanks in advance
abik81 said:
Hi!
I can`t find any topic like this...
1.My Hermes is stop responding aftr few minutes when I`m not using it. (Touch screen and hardware buton alsow are not working.
Only way to get it working back is reset using a stylus.
Leds`s are alsow stop flashing.
2. When scereen is "on" I hear silent beeeeeee....... - is this normal?
I have try to put few different ROM`s on it, but problem is still the same.
Can anybody help me to sort it?
Thanks in advance
Click to expand...
Click to collapse
There are some tips and tricks to stop freezing and hanging. One key one is to put it into sleep mode yourself by pressing the power key NOT let it go into sleep mode by itself. Aside from that have you tried the things mentioned here:
http://michael-channon.spaces.live....BlogPart&partqs=cat=Hermes+Freezing%2fHanging
Mike
I have try all tips from http://michael-channon.spaces.live.c...ng%2fHanging but problem is still the same. I`m afraid it`s could be a hardware problem. I have put a light rom, there is no additional software in. Ihave also put a new batery, make test with pocket mechanic - get no more ideas. If I swith on hermes in safety mode problem is exactly the same. Sometimes system is stop responding directly after swith on, sometimes it`s take few or about 20 minutes.
Any ideas?
You could try a Hard Reset or changing the rom. Remember to back up everything first, I'd do both a contacts backup and a full backup. That way if you still have the problem after the full backup you can try a HR again but setup everything from scratch.
It may be bad blocks, so you should use MTTY to check this.
If you do decide to upgrade the rom, MAKE SURE YOU HARD SPL 1ST.....
Cheers...

Qtek S200 problem! Help!

I have a big problem with my Qtek S200!
The screen suddenly freezes and sometimes slowly becomes white.
Hard reset and flashing the phone did not help.
Please Help (In non technical language)!
Thanks for your replies.
amir287 said:
I have a big problem with my Qtek S200!
The screen suddenly freezes and sometimes slowly becomes white.
Hard reset and flashing the phone did not help.
Please Help (In non technical language)!
Thanks for your replies.
Click to expand...
Click to collapse
1. is your battery fully charged..
2. did you drop the phone really hard..
3. did it got accidentally wet before
4. flashed but done wrongly
ask this questions yet if none... repost it back lets find a solution.

Major Problem FFS!

I updated my ROM to HSPL but It was running weird so I put the 1.42.0000 back onto it. Now my touch screen will not work at all it works for about 2 minutes then stop all together what can I do I have hard reset it but still nothing.
Please need a reply asap.
Metta24 said:
I updated my ROM to HSPL but It was running weird so I put the 1.42.0000 back onto it. Now my touch screen will not work at all it works for about 2 minutes then stop all together what can I do I have hard reset it but still nothing.
Click to expand...
Click to collapse
From reading this i guess you had a problem before you installed hspl? you may have a got a reply sooner if you had typed the first part of the paragraph as well as the second . Start from the very beginning and go way back past where you installed hspl and tell uncle M3PH what is wrong.
Well, when before I installed it it was been weird every time i pessed the key to go to the lock screen sometimes iwhen I went to unlock it, it would not slide now it is just getting worse.
I'm going to sleep now so I reply in the morning thanks alot mate.
Metta24 said:
Well, when before I installed it it was been weird every time i pessed the key to go to the lock screen sometimes iwhen I went to unlock it, it would not slide now it is just getting worse.
I'm going to sleep now so I reply in the morning thanks alot mate.
Click to expand...
Click to collapse
Sounds like the phone is busy with a background task. The text messaging app can cause this as can the music player or album app when they are scanning for new files. HSPL would not cause this. Try backing up your memory card, formatting it and inserting it into the phone with no data on it. Let me know if the problem persists then (this is only a test to prove if i'm right or not).
It sometimes works now and sometimes doesn't from the lock screen.
did you perform the test that i asked you to do?
I was having the exact same problem with stock ROM 1.66 (so far the only ROM I've been using). I thought it was a hardware failure, but then I turned off all the screen locks there possibly are (Windows classic, Windows standard, CHT's screen lock and even PhoneAlarm's screen lock) and without any lock there is no problem.
Then I've installed S2U2 and so far I've had only one 'freeze' which could be undone by pressing the 'on/off' button, which is a big improvement. Still I need to test this a little longer, because sometimes freezing comes unexpected.
M3PH said:
did you perform the test that i asked you to do?
Click to expand...
Click to collapse
Yes I did, It's working a little bit now not good tho it is still frustration I rang up phones for you were I got my phone from and they sent me an Email with some software to install onto my HTC which apparently should stop it doing this but so far I have not recived the email.
what's the software called?
I don't know I have not received it yet they didn't tell me on the phone.

MY NOKIA 6 goes DEAD all of a sudden!

@all
I have an issue with my nokia 6, it all of a sudden goes DEAD! nothing happens, no screen, no sound, just dead,
i have to press alll the keys for about 15seconds and it jolts out of the COMA! mode, and starts working fine!
has anyone else facing the same situation?
where can i get a 7.1.1 flashable rom or fimrware to update and see if this problem can be fixed!
pls share your feedbacks, so that i can fix this issue!
WBR
ReyTech said:
@all
I have an issue with my nokia 6, it all of a sudden goes DEAD! nothing happens, no screen, no sound, just dead,
i have to press alll the keys for about 15seconds and it jolts out of the COMA! mode, and starts working fine!
has anyone else facing the same situation?
where can i get a 7.1.1 flashable rom or fimrware to update and see if this problem can be fixed!
pls share your feedbacks, so that i can fix this issue!
WBR
Click to expand...
Click to collapse
Theres no ROM available right now if im not wrong and even if there were, i dont think theres a tool currently available to flash it, unless someone can check the old nokia support tool for firmware and flashing process(highly doubt)
battery?
ReyTech said:
@all
I have an issue with my nokia 6, it all of a sudden goes DEAD! nothing happens, no screen, no sound, just dead,
i have to press alll the keys for about 15seconds and it jolts out of the COMA! mode, and starts working fine!
has anyone else facing the same situation?
where can i get a 7.1.1 flashable rom or fimrware to update and see if this problem can be fixed!
pls share your feedbacks, so that i can fix this issue!
WBR
Click to expand...
Click to collapse
Dude, it seems more or less battery port/connections are loose. I don't think it has something to do with s/w. Open back lid and check if the battery is moving/wobbling.. I guess if you fix that you issue is fixed.
I'm having a different problem. External earphone not detected unless I press the jack slightly to the back.
I'm using Bluetooth earphone instead.
kanakarkku said:
Dude, it seems more or less battery port/connections are loose. I don't think it has something to do with s/w. Open back lid and check if the battery is moving/wobbling.. I guess if you fix that you issue is fixed.
Click to expand...
Click to collapse
Hey, you do not know about the phone. The battery is internal. So it is not removal. You can see videos about nokia 6 opening in youtube.
Happen once to my N6 about two weeks ago, press all three buttons together to force shutdown and restart phone. Since then everything is fine.
im also nokia 6 sufferer
sir i have same issue sir,
I have an issue with my nokia 6, it all of a sudden goes DEAD! nothing happens, no screen, only sound...
nokia 6
same happend with me
goelvishank, I presume you checked charger works with other device and then again tried to charge right?
valeri.nikolov said:
goelvishank, I presume you checked charger works with other device and then again tried to charge right?
Click to expand...
Click to collapse
poor joke man
Warranty, anybody?
Don't you have any warranty on the phone? Just contact support and ask for a repair.
I purchased Nokia 6 one month before. Now Apps are not responding. I tried to restart it now its not turning on. Android and Nokia logo is coming again and again on screen but not turning on. I also did hard reset but still same problem. kindly help
nokia 6 dead suddenly
ReyTech said:
@all
I have an issue with my nokia 6, it all of a sudden goes DEAD! nothing happens, no screen, no sound, just dead,
i have to press alll the keys for about 15seconds and it jolts out of the COMA! mode, and starts working fine!
has anyone else facing the same situation?
where can i get a 7.1.1 flashable rom or fimrware to update and see if this problem can be fixed!
pls share your feedbacks, so that i can fix this issue!
WBR
Click to expand...
Click to collapse
i also encountered the same problem. afterwards i do the same pressing 3 buttons togethyer for around 15 mins after my mobile starts again omg relief...
why this happens to nokia 6. i tried to start usually by pressing power button but no reaction after reading this msg only i tried pressing 3 buttons it came back alive:laugh: . my doubt is is this a big problem and will it happen again:crying:
Nokia 6 Frozen
I am also having a similar problem. The screen freezes, no buttons work. This issue has come 2 times over the last 20 days. Both times i was using the google navigator /maps and was shifting between applications --> and suddenly frozen. Since Nokia 6 does not have a removable battery , I had wait it out for another 5-6 hrs till battery drained completely and I recharged it. But during travel in unknown area when your phone abandons you, you feel handicapped.
Thank You
samkuek said:
Happen once to my N6 about two weeks ago, press all three buttons together to force shutdown and restart phone. Since then everything is fine.
Click to expand...
Click to collapse
Thank You. Worked for me! You saved my day!!

Categories

Resources