Dear all,
I have manage to login via OWA to my exchange server and now I want to disable the auto login (since I have save my password the first time I login). I tried clearing the internet temporary file and cookies but it still logs me in automatically. My Question, how do I disable this? Thanks.
Regards,
Kueh
Same prob months ago...
No solution a part of hard resetting
Rups
p.s. Wrote a few thing if you solve problem..
Tried changing the account password on the server to see if you get prompted on next login?
Cheers,
Martin
rk-OSR version 1.0.10 Automatic windows mobile outlook mail and exchange active synchronizer.
Here is a application I developed for my personal use now sharing with you all for non commercial use.
I basically use this utility to check emails from multiple email accounts from my windows mobile device using the wifi, gprs networks
You can even perform Exchange Active Sync too!
Feature list
Works on windows mobile 5 and 6.
Can sync up multiple email accounts at multiple schedules setup.
Can perform Exchange Active Sync.
Connect using: Wi-Fi only, Wi-Fi if not GPRS, Manual Wi-Fi, Gprs Only or Existing connection(USB)
Switch off GPRS/3G after sync
Option not to sync during Saturdays and Sundays
Get notified on emails or failed attempts
Get notified with custum sound(wav files).
Keeps device 'Alive' till all the accounts have been synchronized.
Supports 'Silent' mode.
Supports command line initiation.
Supports one touch* email checking(one touch on the shortcut connects to wi-fi network and switches between accounts and synchronizes and then hangs up wi-fi)
Can be set to sync only if device sleeping.
Does not write anything to registry.
Does not run in background.(works on notifications)
You can uninstall the application from ‘Remove programs’ and delete the application directory.
Installation:
Install the cab file attached below
After installation launch the program rk-OSR from the programs and go thru each tab page to configure it and finally save the settings (make sure the Enable check box is checked) test the functionality if working properly. Then close the application. Now the sync should happen at next specified schedule.
*One touch synchronization: A Very good feature for people checking mail manually, so that you do not have to switch accounts and click the sync menu each time or start/stop wifi etc, just one click to do that now. You can also assign this shortcut to hardware buttons. The new install adds a new program icon called ‘rk-OSR-Now’ to your programs list. But you need to do the following procedure done before attempting ‘rk-OSR-Now’ shortcut.
You should configure the ‘rk-OSR’, and make sure it is working properly and you are able to synchronize your accounts properly.
You must edit the shortcut, rk-OSR-Now; add additional text “Now” without quotes. Basically your target should read as below
"\Program Files\rk-OSR\rk-OSR.exe" Now
Hope it is simple to configure.
I have been using it on TyTn with WM6.
By the way this is my first WM application!
Code:
Following command lines supported
"\Program Files\rk-OSR\rk-OSR.exe" Now ---> Checks the mail manually
"\Program Files\rk-OSR\rk-OSR.exe" Enable --> Enables the rk-OSR
"\Program Files\rk-OSR\rk-OSR.exe" Disable --> Disables the rk-OSR
Update: 1.0.10
Added better file browser to locate the *.wav files
Fixed the bug with the 'Wait time to Sync'
Email.zip is a sound wav file 'You got mail' (ofcourse female voice! )
Note: this application requires Compact Framework 2.0
You need compact framework 2.0 installed inorder to run this application. The compact framework is already part of WM6, so if your device is WM6 skip this step. But most of the WM5 devices do not have this update. So you must download here and run the installation on your desktop (then active sync to update your device). Only after completing this step install the application.
New: If you want 'Push Like Mail' support please follow the application link to rk-SMS Switch
How to info for rk-SMS Swich with rk-OSR here
If you like the application please show your support by donation on Paypal
Download from here
Looks like this post of mine pushed down too fast because of the WM6 release(Wrong timing )
So i am just bumping my post up.
Anyone has any feedback?
I have synchronization problems whith gprs connection and activesync.
I try it you software....
Thank you.
Aslher said:
I have synchronization problems whith gprs connection and activesync.
I try it you software....
Thank you.
Click to expand...
Click to collapse
If you have synchronization problems already the rk-OSR might not work for you.
rk-OSR just schedules the outlook synchonizations, all the sync logic is on the outlook, not in rk-OSR
First you have to fix the problem with your sync, then only you could use rk-OSR
HTH
rk-OSR Update 1.0.1(One touch sync)
Please read the first post for the updated information and the cab file.
tytnguy - I'll try the app and get back here.
the idea sounds solid and do sync manually, so thx for the app allready
Keep up the good work in making life better for everyone
Update 1.0.2
There was a bug..
If you used Wifi to sync then any subsequent attempt to switch on wifi using the communication manager would fail(till soft reset )
Its fixed in version 1.0.2 now
I'm not sure why this app is not getting more attention, i mean syncing over wi-fi, isnt that what everyone has been cribbing out ever since AS4/WM5 came out??
neways, thnx for the app, will try it out..
let me see if I understand this app correctly before testing it :
At a given schedule it will turn on wifi
Synch
disconnect wifi
Right ?
What if im not at home at the time, so dont have wifi, will it default to GPRS ?
What happens to the schedule I have allready set in activesync ?
Right now i have just scheduled in active synch. So it uses either wifi provided I turned it on when i got home or if not turned on, GPRS.
thks
damase said:
let me see if I understand this app correctly before testing it :
At a given schedule it will turn on wifi
Synch
disconnect wifi
Right ?
Click to expand...
Click to collapse
Yes It does.
damase said:
What if im not at home at the time, so dont have wifi, will it default to GPRS ?
thks
Click to expand...
Click to collapse
Right now i do not have that functionality, but I will look in to that possiblilty
damase said:
Right now i have just scheduled in active synch. So it uses either wifi provided I turned it on when i got home or if not turned on, GPRS.
thks
Click to expand...
Click to collapse
I am not clear on the above. Can you explain a bit more?
Thanks
Question:
Hi there tytnguy, I've got a question:
I'd like to use your app; I have an exchange account for work; but for my private mail I use the Outlook Mobile. The problem is that when I set it to sync every 30 minutes or so; it keeps doing that during the night; waking me (an the misses) every time someone tries to sell me Viagra, Russian brides or weight-loss pills.
The times you enter in the "schedule-tab"; are those the exact times that the app will sync? Or are those the times between which the "outlook-Mobile schedule" will be active?
BTW: looks brilliant for a first-timer!
stynos said:
Hi there tytnguy, I've got a question:
....waking me (an the misses) every time someone tries to sell me Viagra, Russian brides or weight-loss pills.
Click to expand...
Click to collapse
I know its not funny
stynos said:
Hi there tytnguy, I've got a question:
The times you enter in the "schedule-tab"; are those the exact times that the app will sync? Or are those the times between which the "outlook-Mobile schedule" will be active?
Click to expand...
Click to collapse
Exact time on which you want the schedule to occur.
Thank you
tytnguy said:
Exact time on which you want the schedule to occur.
Thank you
Click to expand...
Click to collapse
Thanks for the quick reply!
Do you mean the time the sync will occur?
stynos said:
Thanks for the quick reply!
Do you mean the time the sync will occur?
Click to expand...
Click to collapse
Sorry about the typo.
I meant to say 'Exact time the synchronization will occur'
Quick answer.. Yes
tytnguy said:
Yes It does.
Right now i do not have that functionality, but I will look in to that possiblilty
Right now i have just scheduled in active synch. So it uses either wifi provided I turned it on when i got home or if not turned on, GPRS.
I am not clear on the above. Can you explain a bit more?
Thanks
Click to expand...
Click to collapse
Sure, in active sync, in the email properties you can say check for new mail every 4 hours or2 hours etc.., and determine settiings for peek, and off peek days/times.
It then checks if i have new email according to this, using either wifi provided I leave it on, or gprs if wifi is off.
tytnguy said:
Sorry about the typo.
I meant to say 'Exact time the synchronization will occur'
Quick answer.. Yes
Click to expand...
Click to collapse
Brilliant! I just had it sync; works like a charm!
The only thing: the device wakes up. Any change of performing the actions in the background? So the screen doesn't come on?
damase said:
... or gprs if wifi is off.
Click to expand...
Click to collapse
Are you able to setup the network configurations to use Wifi and if not available then to use GPRS?
I am not able to do it on my TyTn?
I dont think I setup anything specific really...
If Wifi is avaialble and the phone is connected to my acees point at home it uses wifi to connect to the internet and so on
If its not, it goes through connecting to the net via GPRS
Im running WM6 by the way.
damase said:
I dont think I setup anything specific really...
If Wifi is avaialble and the phone is connected to my acees point at home it uses wifi to connect to the internet and so on
If its not, it goes through connecting to the net via GPRS
Im running WM6 by the way.
Click to expand...
Click to collapse
You only use exchange?
yes only exchange
Hello.
I have been looking for a way to configure the device with a single CAB or CPF file to sync with an Exchange server but I have a problem setting to sync Tasks.
Until now I figured out how to set up all the necessary settings, like server address, certificates and schedule but I can not set up Tasks to sync, I always have to set up by hand, that's because the settings for Tasks are specific for every device and I can not find how to autoconfigure it.
I have read many times the msdn here and here but can not figure out how to do.
Anyone can guide me how to accomplish with it???
Thanks in advance.
Hello to all.
I am using X1 with Dutch Tmobile.
One of the steps to complete setup for exchange account was providing lock pin/password, this was obligatory.
The problem i have now is that I can not disable it. Checkbox is greyed out and I can only change: lock time (0, 3, 5) and password itself.
I am really happy with Exchange acces from X1 but pin is really annoying.
Any help appreciated.
Cheers
gruczniak said:
Hello to all.
I am using X1 with Dutch Tmobile.
One of the steps to complete setup for exchange account was providing lock pin/password, this was obligatory.
The problem i have now is that I can not disable it. Checkbox is greyed out and I can only change: lock time (0, 3, 5) and password itself.
I am really happy with Exchange acces from X1 but pin is really annoying.
Any help appreciated.
Cheers
Click to expand...
Click to collapse
I have the same problem which is really anoying especially when using Tomtom as I have to type in my password every 5 minutes whilst driving.
From what I have been able to find out, it is caused by the policies on your server/exchange server, where for company information security reasons it requires a password and prohibits the phone user to dissable this function.
To change this, a change in windows server or exchange server is necessary.
If anybody can post instructions on how to do this I would be most grateful.
In Exchange 2003 SP2
You need to open system manager and click the + sign next to global settings. Now right click on mobile settings and select properties.
In the dialog box that has appeared click on device security and then u will have several options to do with the device pin code.
Enjoy.
scotjen1 said:
In Exchange 2003 SP2
You need to open system manager and click the + sign next to global settings. Now right click on mobile settings and select properties.
In the dialog box that has appeared click on device security and then u will have several options to do with the device pin code.
Enjoy.
Click to expand...
Click to collapse
Thanks for pointing me in the right direction.
In exchange 2007, start Exchange Management Console, navigate to Organisation Configuration/Client Access/Mailbox Policy Server. Double click, select Password tab and uncheck require password. Sync with active sync and then you can remove the password.
Huge thanks for that! It has been bugging the hell out of me. Am using Small Business Server 2008 and it does all these settings automatically so I had no clue where to look.
Saddly for me my organization is to big to alter anything on the Exchange server.
Exchange policy update is still a workaround when you do not sync for some time (vacation etc)
Dear All,
I've a serious problem with the lock feature in my HD. I access my work's e-mail through Exchange Server account. Once I synced it and it forced a password to be used as security the lock feature cannot be used!!!
Anybody knows how to fix this issue??
I suppose that what you mean is that the lock is disabled / enabled and it's impossible to change that?
That's because exchange server is forcing security policy to your device - you can bypass it by editing registry, but it will come back after every synchronization with exchange server so it's not really a sensible solution and I didn't hear about anything else...well you may force your admins to change security policy but I bet they won't do it
One more thing - in active sync there's an option to not force security policy but I don't know if it works - I've stopped using exchange server and I'm just synchronizing with outlook directly.
Hi Fadi,
maybe this will help (I know it worked for me..)
http://www.zenyee.com/2008/10/19/stay-unlock-goes-20-after-two-years/
But I wouldn't tell it your security administrators if I were you
peter_65 said:
Hi Fadi,
maybe this will help (I know it worked for me..)
http://www.zenyee.com/2008/10/19/stay-unlock-goes-20-after-two-years/
But I wouldn't tell it your security administrators if I were you
Click to expand...
Click to collapse
Thank you peter, will check and feed you back
kalbit said:
I suppose that what you mean is that the lock is disabled / enabled and it's impossible to change that?
That's because exchange server is forcing security policy to your device - you can bypass it by editing registry, but it will come back after every synchronization with exchange server so it's not really a sensible solution and I didn't hear about anything else...well you may force your admins to change security policy but I bet they won't do it
One more thing - in active sync there's an option to not force security policy but I don't know if it works - I've stopped using exchange server and I'm just synchronizing with outlook directly.
Click to expand...
Click to collapse
Thank you for your illustration
Or you could try this... it worked for me..
http://blogs.microsoft.co.il/blogs/...curity-policy-for-windows-mobile-devices.aspx