Related
Hey, humans!
After searching through the forums for a couple of days, I thought I would go ahead and post to ask if anyone has a fix for the following problem...
I recently purchased the Jabra BT 620s stereo Bluetooth headphones, tapped the A2DP cabs, and got wireless stereo working (along with all of the buttons and the mic) right away.
Unfortunately, every time I turn off the headphones and reconnect them, they connect to the phone as "Hands-Free" only. In this state, I can use the answer/call/play/pause/etc. buttons and the mic, but audio is delivered through the 8125's speakers and not the headset. To fix it, I have to open the BT settings, click on the Jabra phones, Refresh (because it still says that the set is connected as "Hands-Free" and "Wireless Stereo"), and reactivate "Wireless Stereo" every time I want to listen to music.
Is there any trick/registry tweak that could help me bypass this extra step? Oh, and does anyone know of a media player that doesn't hog my resources like WMP, uses AVRCP, and can play streams?
Thanks in advance!
In response to my own (2nd) question...I've read that TCPMP respondes to AVRCP commands.
Does anyone know how to get them to work with the Jabra BT 620s headphones?
I'm continuing to look for a solution to my problem and find an alternative to WMP10, which sucks up so much memory.
I have finally managed to get Pocket Player 2.72 (http://www.conduits.com/products/player/download.asp) working with AVRCP. Although it is supposed to work right out of the box, I tried using it and received no feedback from the Jabra BT 620s's buttons.
While looking for a WMP today plugin -- one that I had hoped would have a smaller footprint while still allowing AVRCP controls to function -- I came across a post and eventually found a .dll for Pocket Player that allows me to use my Jabra's controls to influence the player.
Unfortunately, Pocket Player is a woefully bad player (even worse than WMP10 in my opinion!) and I can't get much use out of it because it “skips” constantly and forces the screen back on (it doesn't automatically shut off again) with every command from the headphones. However, for everyone who prefers PP and can't get Bluetooth to work through it, trying downloading this rar file (http://www.modaco.com/index.php?act=Attach&type=post&id=19163), unrar'ing it, and placing the enclosed .dll in your Pocket Player directory.
I personally really like pocket player, but you need to wait for v2.73 out soon apparently. If you go to conduits forum you can see alot of info on this issue.
I find it plays beautifully thru iTech Clip R35 (I admit I have a different device ie jamin).
But to your first point, I still have that problem as well, I have to manually switch on the bluetooth stereo option, I haven't found a solution for that yet.
cheers
groverbot said:
Hey, humans!
After searching through the forums for a couple of days, I thought I would go ahead and post to ask if anyone has a fix for the following problem...
I recently purchased the Jabra BT 620s stereo Bluetooth headphones, tapped the A2DP cabs, and got wireless stereo working (along with all of the buttons and the mic) right away.
Unfortunately, every time I turn off the headphones and reconnect them, they connect to the phone as "Hands-Free" only. In this state, I can use the answer/call/play/pause/etc. buttons and the mic, but audio is delivered through the 8125's speakers and not the headset. To fix it, I have to open the BT settings, click on the Jabra phones, Refresh (because it still says that the set is connected as "Hands-Free" and "Wireless Stereo"), and reactivate "Wireless Stereo" every time I want to listen to music.
Is there any trick/registry tweak that could help me bypass this extra step? Oh, and does anyone know of a media player that doesn't hog my resources like WMP, uses AVRCP, and can play streams?
Thanks in advance!
Click to expand...
Click to collapse
Hi, I just bought the BT-620s and have exactly the same problem you have mentioned, otherwise a great BT headset.
Did you ever manage to find a fix for this problem?
Using the M3100 with the itech clip S35 Headset
firstly i've been using the fit4cat tweaker which has an A2DP quality improvememt tweak - unfortunately the tweak makes the quality worse so i've tuned it off and the music quality is not too bad when playing through my car stereo. However, I need to try some decent headphnes with the unit because the ones supplied sound very tinny!
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Thirdly, I have the S35 outputting through my car stereo. When people are calling me they can hear an echo (of themselves speaking as the sound comes out through the car speakers). There is some sort of delay i suppose but this is very annoying. I'm not sure why its happening because when I tried the headset using my Sony Ericsson W800i there was no such echo!
therfore, is the echo problem an A2DP thing (as the w800i does not support it and this works ok) or is it a m3100 thing? To test this I could turn off A2DP and ry the headset again - is this possible?
any suggestions appreciated
I have the Jabra BT620s headphones and I have indentical problems.
After install all works well but as soon as you disconnect media player just plays via the phone speaker
at least you guys get it to work once. WMP never plays through my iPAQ bluetooth headset. AVRCP controls work fine though. TCPMP plays fine through the bluetooth headset as long as I pair it up before I execute TCPMP. This is exactly how it worked with my 8125.
The WMP issue is very strange and is likely yet another example of the lack of QA testing in the A2DP portion of the TyTN's implementation. I would expect that these issues will all be fixed in a subsequent TyTN ROM update.
I'm getting on ok with this
quality is pretty good both using the headset with my own sony ear buds. Vast improvement over the itech supplied ear buds.
A2DP - no skipping during normal playback and it works well - quality is not an issue through the car stereo either - not bad at all . I've even been listening to music over A2DP and running sat nav using a GPS BT receiver. A slight pause in music when GPS connects but then all runs well.
My only 2 gripes are:-
1. When you disconnect or go out of range of the headset, it reconnect perfectly with the phone application. This isn't the case with the wireless stereo. I have to enter BT settings, uncheck the wireless stereo setting, save then recheck the setting before it reconnects. Slightly annoying but accesptable (for now)
2. the echo using the headset through my car stereo. People calling me can hear themselves again (about a 0.5 second delay) through the car speakers! Just to repeat my earlier post, this does not happen with my W800i. not sure if its an A2DP problem or something else.
Similarly here, I don't seem to be able to make A2DP (and the handsfree profile, for that matter) work.
Using HTC and an Itech clip, I am able to pair the "wireless stereo" and then play music for some 10 seconds on the GS Player, after which the Wireless Stereo symbol disappears from the top bar and the connection is interrupted. I actually believe that the Itech clip is 'shut off', as I have to turn it on again.
When I try to reconnect the headset, it just won't work and the whole machine is slowed down. Only a soft reset helps.
I hope this is a ROM problem (and not mine) and it'll be fixed soon...
WMP and the Itech clip work fine for me, with the current German ROM.
a2dp issues w/th Hermes
With the CHT9000 WWE rom I had the wireless stereo drop off after about 1 minute, then I would have to reconnect. I flashed to the other dopod WWE ROM (latest) and the problem is gone....sound is comparable to my prophet. Reg tweaks suggested in other forums definetely make the sound quality worse for either ROM version. I think further updated ROM's will improve A2DP reliability (or someone may find a reg hack)...as with the prophet A2DP it just takes time.
Hi guys, I've got the vario ii and the Sony Ericsson HBH-610.
I can add the headset fine and make calls through it, but I don't know how to get the music in wmp to play through it.
If anyone has a few mins spare and could explain it for me I would be really grateful
Headsets..HBH 610...
With my CHT 9000 I use an OMIZ 5660...works great for calls and wireless stereo. I don't have any other headset to compare it to (since I only have used this brand)....I believe that if your "options" do not list wireless stereo then you can't use the A2DP function on your device, at least as it is designed to be used.
I'm not aware of a one-piece headset that supports A2DP that is available (all should have either 2 headphones or two wired ear plugs)..
THE ONLY WAY, I FIND :
I have a 590A Plantronics Bluetooth HeadSet
You must refresh Services of your iTech or your Plantronics !
Go Parameters, Bluetooth, Select your Headset, Refresh.
Then reselect services and Save !
Each time you lost the link (Bluetooth turn off or ...) you will have to Refresh,reselect and Save !
I am searching for a Solve but not find another !
I forget something else !
It is the same thing with my Bluetooth GPS (GNS).
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
So far A2DP has worked fine for me with my Nokia HS-12W. I have applied some registry settings and optimised my SD card and so far it has played with hardly a skip. Definitely better than my previous BA with WM5.
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
hutton118 said:
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
Click to expand...
Click to collapse
This is probably headset dependent because with my Nokia HS-12W if i need to reconnect i just press the Audio button and it re-establishes the A2DP connection. No going to BT settings at all.
Interesting, can you just confirm what you mean by the Audio button. Is that just hitting 'Play' in WMP?
Thanks
No, the Nokia has a Music key (not Audio, my mistake) which switches from A2DP to the built-in radio. So if i have lost the BT connection pushing the Music key to select the Audio player will re-establish the connection and music is streamed to the headset. You will see the A2DP icon on the today screen when it has connected and get the chime in the headset.
Ok, thanks for that.
Just one last point, if the connection is lost while music is streaming, does the audio switch to the phone speaker instead??
My problem is I'll be listening to music on the subway then or some reason I'll loose the connection (interferance, low battery...whatever) and immediately music starts coming out the speaker, much to my embarrassment!
Thanks again!
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
http://images.google.nl/imgres?imgu...ox-a&rls=org.mozilla:en-US:official&sa=N&um=1
Now here's the problem. When I pair the phone with the Headset, it pairs the 2 services HANDSFREE & WIRELESS STEREO. Then i can listen to music via the headset.
When i turn the headset off and then back on again, it switches on the HANDSFREE ONLY !! And i have to go thru the following process to turn on the WIRELESS STEREO again:
1. on phone, click on Bluetooth Devices
2. select the headset device to view the 2 services (handsfree and wirless stereo). Both are selected. Deselect the Wireless Stereo service.
3. SAVE
4. on phone, click on Bluetooth Devices
5. select the headset device to view the 2 services (handsfree and wirless stereo). Re-select the Wireless Stereo service.
6. SAVE
Then it works again and i can listen to my music again.
Its a very annoying process and I wish someone could help me to explain if there is a faster way? Does everyone also have to go thru this process or am i doing something wrong?
Does there exist a program that can automate this process or any other solution?
looking forward to replies!
there are more than one small app to make it easy.i found one that works on my HD. uploaded for you here:
http://rapidshare.com/files/207816065/13-BTaudioTransfer.cab
next time try and do a search....
thanks a lot! It actually works! cant imagine why microsoft creates an OS without this built in as standard !
thanks.
ronald_adi said:
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
http://images.google.nl/imgres?imgu...ox-a&rls=org.mozilla:en-US:official&sa=N&um=1
Now here's the problem. When I pair the phone with the Headset, it pairs the 2 services HANDSFREE & WIRELESS STEREO. Then i can listen to music via the headset.
When i turn the headset off and then back on again, it switches on the HANDSFREE ONLY !! And i have to go thru the following process to turn on the WIRELESS STEREO again:
1. on phone, click on Bluetooth Devices
2. select the headset device to view the 2 services (handsfree and wirless stereo). Both are selected. Deselect the Wireless Stereo service.
3. SAVE
4. on phone, click on Bluetooth Devices
5. select the headset device to view the 2 services (handsfree and wirless stereo). Re-select the Wireless Stereo service.
6. SAVE
Then it works again and i can listen to my music again.
Its a very annoying process and I wish someone could help me to explain if there is a faster way? Does everyone also have to go thru this process or am i doing something wrong?
Does there exist a program that can automate this process or any other solution?
looking forward to replies!
Click to expand...
Click to collapse
I have a same problem with my car audio, but when i install this BT program in lower post they connect me only to handsfreee, and when i go to play music they disconnected my car BT audio.
Just for you interest - this does NOT make A2DP work.
Mirror site please!!!
KukurikU said:
there are more than one small app to make it easy.i found one that works on my HD. uploaded for you here:
http://rapidshare.com/files/207816065/13-BTaudioTransfer.cab
next time try and do a search....
Click to expand...
Click to collapse
Can someone please mirror this download, my limit is up on.
Here is the source.
I got it downloaded, and here is the developers web site
http://trianglepowers.com/PPC
(sorry all, could not find an edit for my last post)
Pair your stereo headset and select the Heaset and Wireless Stereo profiles, this will work from start.
Next time you turn on your stereo headset it will only connect as standard headset (ie mono for phone calls)....
Just press the play/pause button on your headset and it will auto connect to A2DP stereo also.
Simple EH?
Tried that!
I have tried that, and do it on my laptop (another set and stereo profile only), it may be dependent on the headset you are using.
The Triangle Powers BT Stereo is mono output only, and made the audio quality poor on my HD. http://trianglepowers.com/PPC/ViewApp.aspx?ID=52
I installed teksoft A2DP Toggle 1.1 this morning http://teksoftco.com/forum/viewtopic.php?t=1885 and added it to the program button in TouchFlo, not the today screen. it seems to work fine if you press the button twice, better than 7 clicks. (My HD info in the signature, Telstra TouchFlo replaced by Standard HD)
GSamways said:
I got it downloaded, and here is the developers web site
http://trianglepowers.com/PPC
(sorry all, could not find an edit for my last post)
Click to expand...
Click to collapse
Looks like promising software, I will play with it and update in few days with pros and cons
GSamways said:
I have tried that, and do it on my laptop (another set and stereo profile only), it may be dependent on the headset you are using.
Click to expand...
Click to collapse
If pushing the Play/Pause does not connect a previously paired BT Stereo Headset to your HD then it is not a true A2DP profile headset.
See if you can get your hands on a pair of folding Sony DR-BT22 headphones.
True A2DP with built in mike to answer incoming calls. Bass is very good and full funtion with the HD.
Highly recommended.
ronald_adi said:
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
Click to expand...
Click to collapse
ronald_adi said:
Hmm! I pair the HD with a great bluetooth headphones from Sony I got in Tokyo recently (not the same as yours). I dont have any problem with the A2DP connection at all. I have perfect high audio definition thru to the headset.
Sorry not much help-but it may be the headset not the HD thats your problem!
Click to expand...
Click to collapse
Agree
You guys are correct, the smaller headsets that try to share the Play/Answer/end button are probably the issue.
I have been using A2Dp Toggle 1.1 as mentioned and link above and it works great, no loss of sound noticed.
We should start an XDA (not just HTC) WiKi to list headsets that connect or not for WM5 and WM6.
HD Compatible Headphone
I have a Sony DR-BT50 headphone that works beautifully. The sound is brilliant for Music and particuarly movies that I have transferred from DVD to the HD with MP4HT4HD!
I never thought that i would watch a movie on a screen so small but the clarity is something else and the high audio signal with the bluetooth headphones make it a pleasure! Great for long layovers at airports etc.
Any in-ear types that work?
All the sets that I have seen posted as working are the full headphone (over ear) types, and this may again be a shared button thing.
Does anyone have / know of an in-ear / earbud type that works / connects correctly
A2DP Toggle 1.1
I dowmloade that A2DP Toggle 1.1 on my phone. I use HTC TYTN1 running Windows Mobile 6 Professional and this software gives hell to say the least.
When I connect it to my headset, it works fine BUT it does not pay MP3s on my headset. It keeps on saying ERR on the icon of the head speakers (the second icon form bluetooth icon). I even asked most of the technician but no one knows anythings. If anyone knows what my probles is, please rescue me!!!
I might be doing something, please help me guys
Toggle works for me!
I had the same problem, the triangle powers prog didn't work for me. In fact the headset icon was on but no playback.
The toggle 1.1 works, none of the funcitons described on it's website are available, setup and various icons are from the home page but HTC Touch HD home page doesn't support that.
Never the less, putting Toggle in my program list and using it toggles easy between phone speaker and headset. Like someone has already said, two clicks and we're in business from starting my van to getting music from my phone on the stereo. I'm happy enough with that.
I have a Pioneer stereo with Parat built in, so I get BT audio and Hands free calls. All seems to be working perfectly now. Thanks to this thread.
Recently purchased the SE MW600 stereo bluetooth headset. Was pleasantly surprised to discover that track name shows up on the headset, when paired with the HD2.
Display of track info is a SE implementation and is supposed to work only with SE phones. So not sure why it is working with the HD2.
Note that I also paired the headset with my Nexus One, Archos 5IT and Motorola Milestone. However, with these pairings, track name did not work.
So i suppose it is unique to WM/ HD2 bluetooth stack...
That's a good thing to hear.
I have been searching for a nice stereo bluetooth headsets for my lovely HD2 as well.
Does the Sony MW600 has swap between talk and music function?
Damnit!
I have an HBH-DS980 bluetooth stereo headset with OLED display, and it worked fine with a K850i. When I moved to the X1, I figured SE would include support for it in their BT stack - no such luck. Eventually I got the guy who writes SmartWatchM to include support, but its very basic - to show track titles, you lose the ability to take calls on it.
Major bummer! I guess yours uses a different, standard BT profile for track info display that the HD2 also supports?
zerglisk said:
That's a good thing to hear.
I have been searching for a nice stereo bluetooth headsets for my lovely HD2 as well.
Does the Sony MW600 has swap between talk and music function?
Click to expand...
Click to collapse
you can do voice dialing using the mw600. and yes, when a call comes in, it automatically switches over from music to call. of course, it also automatically switches over when you dial out from your phone.
also, you can pair it with THREE devices instead of the two that most multipoint bluetooth headsets allow you to.
before this, i have used se ds220, ds980, jabra 3030 and sennheiser mm200. my current mw600 is the most feature-rich headset in a tiny package. the music quality is not as great as the senn bluetooth headest, but you can always swap in your headphone. i would say the quality is good enough for regular commute.
matthewf01 said:
Damnit!
I have an HBH-DS980 bluetooth stereo headset with OLED display, and it worked fine with a K850i. When I moved to the X1, I figured SE would include support for it in their BT stack - no such luck. Eventually I got the guy who writes SmartWatchM to include support, but its very basic - to show track titles, you lose the ability to take calls on it.
Major bummer! I guess yours uses a different, standard BT profile for track info display that the HD2 also supports?
Click to expand...
Click to collapse
i have fond memories of the ds980. in fact, the only thing i miss about it is the access to phonebook and dialing out right from the headset - the mw600 has all the other features except that.
i have not tinkered with the BT settings. it just worked 'out of the box'. please note that my HD2 is on OzROM 2.10 ROM. have gone through the changelogs, but do not see any info on the BT stack being tinkered with.
So i assume track info will also get displayed on a stock HD2 ROM as well. and maybe other WM devices?
I can confirm that mw600 shows song titles with stock rom, using it everyday! Perfect for watching youtube-videos and so on.
How about radio? Are the devices smart enough to know that one (phone) is looking for an antenna, and the other (headset) can act as one, to use the HD2 radio app?
matthewf01 said:
How about radio? Are the devices smart enough to know that one (phone) is looking for an antenna, and the other (headset) can act as one, to use the HD2 radio app?
Click to expand...
Click to collapse
tried it. nope, did not work. i don't think you can get around the limitation of having a cable plugged into the headphone jack for fm to work - the cable acts as an antenna. can fm work without it? i don't know.
however, with the mw600 this point is moot. the headset has onboard FM and the quality, at least where i live, was crystal clear. so the hd2's fm app becomes redundant.
Does it show incoming callers name as well?
Does SE MW600 change songs from dongle ? can i change song from dongle?
aahaan said:
Does SE MW600 change songs from dongle ? can i change song from dongle?
Click to expand...
Click to collapse
Yes, all regular avrcp controls are available. you can skip to next/ previous tracks, pause, play...
about incoming caller names, i only see the number displayed when a call comes in.
Does it show track titeles only from htc music player or is it possible to force it to show tracks from S2P or different player? I have this headset and it only shows tracks from htc player...
IWANEQ11 said:
Does it show track titeles only from htc music player or is it possible to force it to show tracks from S2P or different player? I have this headset and it only shows tracks from htc player...
Click to expand...
Click to collapse
Dosen't show names of tracks from S2P for me either.
Great headset though!!!
i am having problems... so far it wont play music through the blue tooth headset, it will only play thorugh its speakers... I got it to work once after i reset the phone but shortly after (say if i turn the mw600 off and on), it will once again stop working... Handsfree calling is fine though.
any ideas?
tsttse said:
i am having problems... so far it wont play music through the blue tooth headset, it will only play thorugh its speakers... I got it to work once after i reset the phone but shortly after (say if i turn the mw600 off and on), it will once again stop working... Handsfree calling is fine though.
any ideas?
Click to expand...
Click to collapse
Have you enabled A2DP on your device?
[Comm Manager]>Tap on "Bluetooth" (Name, not the switch)>[Advanced]>Tap on the MW600 you have paired>[Edit]>check [Wireless Stereo] and Save.
So does the MW600 show the audio track titles in HD2 android?
i didn't notice this. but i'm using pocket player, not windows or htc or s2p.
what i notice is, when in radio mode, my bluetooth can show caller name, but when in streaming mode it only show number.
i hate the slide volume control. never work when i use my finger, but will activate if it touch my shirt. kind of stupid, you have to look at it to use it. also the clip is not "coarse" and strong enough, easy to slip out. lucky, the earphone connection prevent it from dropping.
Pairing MW600 with PC
Has anyone tried pairing MW600 with PC?
pkchips said:
So does the MW600 show the audio track titles in HD2 android?
Click to expand...
Click to collapse
No, the MW600 does not display track names when using Android, however, the hardware volume keys on the HD2 will adjust the volume of the headset - this does not happen under WinMo unfortunately. This is useful if you plug the MW600 into an amplifier and stream music to your hi-fi because then you can control everything : )
Another plus of using the MW600 with Android on the HD2 is that if you use DSP manager it will allow you to control bass and treble etc - again, the Audio Booster under WinMo does not affect the headset (even with the hack that allows it to run without a plug in the headphone jack).
The biggest problems with the MW600 for me are the awkward touch sensitive volume control, and the fact that it cuts the beginning off of each track (only a second or so, but if you're listening to music that kicks in on the first beat it gets really annoying).
Dinnu said:
Has anyone tried pairing MW600 with PC?
Click to expand...
Click to collapse
Yes, using windows 7 64bit and a Nexxus Blue Micro Pro dongle (v2.0 + EDR). With windows drivers it sounds awful. The high frequencies are bleurgh....
With a trial of the Toshiba stack and also Blue Soleil Software, it sounded very good indeed....
Make sure you get a dongle with good software/driver support and it'll sound great : )
The MW600 will show you what type of device you are paired with using an appropriate symbol. Like devices (e.g phones) get numbered one to three.
One word of warning, when you pair a new device, by default both the stereo audio and the handsfree audio (for calls) are routed to that device. This leads to some consternation if you, say, pair your girlfriends phone to it then wonder why your own phone no longer has call functionality but the music is working just fine. Oops. Duh, RTFM ; ) Press and hold the call button on the MW600 to choose which of your paired devices has call functionality. Press and hold the Play/Pause button to choose which has stereo audio functionality. It may help to shout expletives at it when you find you can't select the device you want using the 'insensitive one minute, overly sensitive the next' volume slider ; )
Hi folks, I've been having this very frustrating problem with A2DP that I can't seem to find anywhere else on the forums.
My bluetooth headset (Nokia BH-905i) connects to my nexus 4 just fine, and I've been using it to listen to music since I get my nexus in january. But recently, every time I connect my headset, and I go to play any music or other sounds that play through the media channel, it comes out the speaker on the phone. In addition, when I use the volume slider I get the "speaker" icon instead of the "bluetooth" icon that I used to get.
My bluetooth headset has worked fine since the OTA update, it's just very recently (last week or two) that this issue has been happening.
The first time it happened, a simple reboot would fix it, now I can reboot and re-pair the headset all I want, it just won't work.
Has anyone else had this issue?
PS. I will also add that the next/previous track buttons still work, but the play/pause button DOES NOT! Very strange!!!
Am I seriously the only one with this problem?
PickleHead said:
Am I seriously the only one with this problem?
Click to expand...
Click to collapse
What music player app are you using? That could be the problem right there. I sometimes have this problem with my JVC Arsenal head unit, but usually disabling and re-enabling bluetooth does the trick. Don't have to unpair or reboot, just toggle BT on and off.
Anyone know how to get the track info to transmit? It used to work with Apollo and Pandora, but it won't work with Spotify or anything else. In fact, it doesn't work at all on the N4
I use DSub, but I've tried google music, and also any other "media" sounds don't go through the headset as well ie: Youtube, games, etc.
PickleHead said:
I use DSub, but I've tried google music, and also any other "media" sounds don't go through the headset as well ie: Youtube, games, etc.
Click to expand...
Click to collapse
have you checked the device profiles in the bluetooth menu? there is an option for phone audio, and an option for media audio, check them both
Yes I'm sure, I've also toggled them multiple times to try and get it working...
I also have this same problem. I'm using CM 10.1 nightlies
For some reason I able to pair my phone but not the audio.
In the Bluetooth settings though I only have the option for phone audio and not media audio. After checking on a couple of forums, it shows that my radio does support Bluetooth streaming through a2dp, but for some reason I cannot get it to work on my phone...
Edit:
It seems as though A2DP is broken in CM 10.1 as in stock android roms. I'm not 100% about this, but thats what it looks like.
Hi,
I do use AD2P audio a lot, and never had this issue (Sony MW1).
I m using exclusively AOSP or AOKP based roms (never use stock CM 10.1 because of how silly big is the navbar), but I can give it a shot during my next flashing session for testing
I don't have any problem pairing the audio. The checkbox goes and the headset actually beeps. It's connected, android just isn't sending the audio to the headset.
Me too
PickleHead said:
I don't have any problem pairing the audio. The checkbox goes and the headset actually beeps. It's connected, android just isn't sending the audio to the headset.
Click to expand...
Click to collapse
I've got the same issue.
I have tried with both jawbone and jabra headsets, no joy.
If I toggle bt on/off/on, connect the headset and then try playing music immediately I get ~1 second of audio over bluetooth before it goes silent.
I'm currently on PA 3.15 with moles kernel, but am going to try some other kernel/rom combos.
if anyone knows which logs i should be looking at i'm happy to upload them
Not quite the same problem, my music plays out of the phone speaker. Also I'm running stock rom.
PickleHead said:
Not quite the same problem, my music plays out of the phone speaker. Also I'm running stock rom.
Click to expand...
Click to collapse
If i wait more than 1 or 2 seconds after connecting my headset it comes out of the speaker also, as the bt media connection dies. I only get the little bit of audio if i hit play right after I connect the headset
I managed to find a very strange work around...
I installed this app: https://play.google.com/store/apps/...sImNvbS5tYXhpc3Rhci5tb25vYmx1ZXRvb3RoZnJlZSJd
I turned on the app, and I could listen to music over mono mode (which sounds AWFUL). I then turned the app off, and when I changed the volume with the volume buttons I noticed the volume bar was displaying the bluetooth icon instead of the speaker icon.
My app was playing music, I didn't hear anything, but my headset was still outputting the characteristic 'hiss' of being in mono mode. So I went into the bluetooth settings and turned off mono mode, and now it is playing music through A2DP finally... We'll see if this problem occurs again and I'll see if the same process fixes it again. I'm just glad it's finally working again without resetting my phone.
I just wanted to update my post for anyone else who might have this problem in the future. I've performed this fix once before my last post and I haven't had to do it again, I've also uninstalled that app and everything is still working great.
It worked for me too!
Thanks to PickleHead and his workaround I'm listening again.
Thanks!!!
Media audio VS. Call Audio
Hi,
I have Samsung galaxy S3 with android 4.1.2 connected to my fordAudio BT device.
I am playing music using the original media player that came with the Android.
The BT connects quickly, but I can't hear the media I'm playing.
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Does this helps to understand the issue?
Hi,
I have Samsung galaxy S3 with android 4.1.2 connected to my fordAudio BT device.
I am playing music using the original media player that came with the Android.
The BT connects quickly, but I can't hear the media I'm playing.
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Does this helps to understand the issue?
Click to expand...
Click to collapse
I think that is a different issue.
Thanks to PickleHead and his workaround I'm listening again.
Thanks!!!
Click to expand...
Click to collapse
I'm glad I could help mrjole. This was a very frustrating issue, I could not listen to my music for about a month!
Bluetoot Media Audio failing
PickleHead said:
I just wanted to update my post for anyone else who might have this problem in the future. I've performed this fix once before my last post and I haven't had to do it again, I've also uninstalled that app and everything is still working great.
Click to expand...
Click to collapse
I'm having exactly the problem described here, but this solution doesn't work for me. I have a Galaxy S4 and the bluetooth media audio sometimes works when I boot the phone up, but later it doesn't work. I tried this MonoBluetooth app and it doesn't seem to help. When I tell it to turn on the the mono signal, it says the media is disconnected even though the bluetooth module says it is connected to the AD2P device with media audio. On cases where it does connect, it seems to work, but in that case the bluetooth works with out this app fine.
I'm running 4.2.2 and see this on both the MDK and ME7 code base. I'm looking for a good soluton. I tried the Bluetooth Fix Repair on Google Play, but it can't seem to find my bluetooth configuration folders.
selicoh said:
Recently I have discovered a "workaround":
When I disable the "call audio" (using the BT menu in settings) and leaves only the "media audio" checked, I am able to hear the media play.
If I re-enables the "call audio", the sound mutes immediately.
Click to expand...
Click to collapse
I have had exactly this problem for a couple of days with my S4 connected to my Jabra Freeway car speaker. Also in my case, disabling call audio makes the music pass through, but then I can't use the phone via the speaker which is sort of the whole purpose of the thing!
But I just found a simple workaround: I simply called my phone from another phone to check that phone audio passed through with both options enabled. It did. But it also cured the problem: After the call, media audio worked again - with both options checked.
marlar said:
I have had exactly this problem for a couple of days with my S4 connected to my Jabra Freeway car speaker. Also in my case, disabling call audio makes the music pass through, but then I can't use the phone via the speaker which is sort of the whole purpose of the thing!
But I just found a simple workaround: I simply called my phone from another phone to check that phone audio passed through with both options enabled. It did. But it also cured the problem: After the call, media audio worked again - with both options checked.
Click to expand...
Click to collapse
I'd be interested to know if this fixes the problem for any length of time. Occasionally, and usually after a reboot, I can use the media audio, but then it fails when I try it again. Fiddling with the connections and apps sometimes makes it come back on, but usually only for a short while. While it is connected, it seems to stay connected.