Using the M3100 with the itech clip S35 Headset
firstly i've been using the fit4cat tweaker which has an A2DP quality improvememt tweak - unfortunately the tweak makes the quality worse so i've tuned it off and the music quality is not too bad when playing through my car stereo. However, I need to try some decent headphnes with the unit because the ones supplied sound very tinny!
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Thirdly, I have the S35 outputting through my car stereo. When people are calling me they can hear an echo (of themselves speaking as the sound comes out through the car speakers). There is some sort of delay i suppose but this is very annoying. I'm not sure why its happening because when I tried the headset using my Sony Ericsson W800i there was no such echo!
therfore, is the echo problem an A2DP thing (as the w800i does not support it and this works ok) or is it a m3100 thing? To test this I could turn off A2DP and ry the headset again - is this possible?
any suggestions appreciated
I have the Jabra BT620s headphones and I have indentical problems.
After install all works well but as soon as you disconnect media player just plays via the phone speaker
at least you guys get it to work once. WMP never plays through my iPAQ bluetooth headset. AVRCP controls work fine though. TCPMP plays fine through the bluetooth headset as long as I pair it up before I execute TCPMP. This is exactly how it worked with my 8125.
The WMP issue is very strange and is likely yet another example of the lack of QA testing in the A2DP portion of the TyTN's implementation. I would expect that these issues will all be fixed in a subsequent TyTN ROM update.
I'm getting on ok with this
quality is pretty good both using the headset with my own sony ear buds. Vast improvement over the itech supplied ear buds.
A2DP - no skipping during normal playback and it works well - quality is not an issue through the car stereo either - not bad at all . I've even been listening to music over A2DP and running sat nav using a GPS BT receiver. A slight pause in music when GPS connects but then all runs well.
My only 2 gripes are:-
1. When you disconnect or go out of range of the headset, it reconnect perfectly with the phone application. This isn't the case with the wireless stereo. I have to enter BT settings, uncheck the wireless stereo setting, save then recheck the setting before it reconnects. Slightly annoying but accesptable (for now)
2. the echo using the headset through my car stereo. People calling me can hear themselves again (about a 0.5 second delay) through the car speakers! Just to repeat my earlier post, this does not happen with my W800i. not sure if its an A2DP problem or something else.
Similarly here, I don't seem to be able to make A2DP (and the handsfree profile, for that matter) work.
Using HTC and an Itech clip, I am able to pair the "wireless stereo" and then play music for some 10 seconds on the GS Player, after which the Wireless Stereo symbol disappears from the top bar and the connection is interrupted. I actually believe that the Itech clip is 'shut off', as I have to turn it on again.
When I try to reconnect the headset, it just won't work and the whole machine is slowed down. Only a soft reset helps.
I hope this is a ROM problem (and not mine) and it'll be fixed soon...
WMP and the Itech clip work fine for me, with the current German ROM.
a2dp issues w/th Hermes
With the CHT9000 WWE rom I had the wireless stereo drop off after about 1 minute, then I would have to reconnect. I flashed to the other dopod WWE ROM (latest) and the problem is gone....sound is comparable to my prophet. Reg tweaks suggested in other forums definetely make the sound quality worse for either ROM version. I think further updated ROM's will improve A2DP reliability (or someone may find a reg hack)...as with the prophet A2DP it just takes time.
Hi guys, I've got the vario ii and the Sony Ericsson HBH-610.
I can add the headset fine and make calls through it, but I don't know how to get the music in wmp to play through it.
If anyone has a few mins spare and could explain it for me I would be really grateful
Headsets..HBH 610...
With my CHT 9000 I use an OMIZ 5660...works great for calls and wireless stereo. I don't have any other headset to compare it to (since I only have used this brand)....I believe that if your "options" do not list wireless stereo then you can't use the A2DP function on your device, at least as it is designed to be used.
I'm not aware of a one-piece headset that supports A2DP that is available (all should have either 2 headphones or two wired ear plugs)..
THE ONLY WAY, I FIND :
I have a 590A Plantronics Bluetooth HeadSet
You must refresh Services of your iTech or your Plantronics !
Go Parameters, Bluetooth, Select your Headset, Refresh.
Then reselect services and Save !
Each time you lost the link (Bluetooth turn off or ...) you will have to Refresh,reselect and Save !
I am searching for a Solve but not find another !
I forget something else !
It is the same thing with my Bluetooth GPS (GNS).
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
I have a spv m3100 and jabra bt620. They both work like a dream most of the time apart from having to go into bluetooth settings each time I want to connect to the stereo headset option.
I have noticed that when in my garden or at home (a quiet environment probably) that I have excellent streaming but when I am walking around, particularly in built up areas like shopping centres, high streets, tube trains, that there is some loss in the streaming which would seem to point towards some kind of interference.
Why the wireless stereo is set as mono as standard I can't understand. I'm sure its to do with improving the streaming quality, but they are supposed to be STEREO!!! Also I set the quality to 58 instead of 48 and there was a definite loss in streaming quality so I switched back to 48.
The AVRCP also works brilliantly in WMP.
The wireless connection also plays havoc with the bluetooth stereo connection with the buffering of stereo constantly dropping. Also noticed that AVRCP wont work with TCPMP, but as there seems to be some major issues with TCPMP and the Tytn I have uninstalled it for the time being until the guys at CorePacket come up with a fix
So far A2DP has worked fine for me with my Nokia HS-12W. I have applied some registry settings and optimised my SD card and so far it has played with hardly a skip. Definitely better than my previous BA with WM5.
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
hutton118 said:
daddyo said:
Secondly, when you first pair the device, media player plays through the headset ok. If you then go out of range, when you return the headset re-pairs ok for the phone but the media player doesn't and it plays through the loudspeaker. You have to enter BT settings and recheck the stereo music option to have the sound through the headset again. Anybody getting this with the same or other headsets?
Click to expand...
Click to collapse
This is the biggest problem for me with my M3100 at the moment. I'm guessing it will only be fixed by an updated\alternative ROM(?!), any ROM's out there I could try that might get round this problem??
Thanks
Click to expand...
Click to collapse
This is probably headset dependent because with my Nokia HS-12W if i need to reconnect i just press the Audio button and it re-establishes the A2DP connection. No going to BT settings at all.
Interesting, can you just confirm what you mean by the Audio button. Is that just hitting 'Play' in WMP?
Thanks
No, the Nokia has a Music key (not Audio, my mistake) which switches from A2DP to the built-in radio. So if i have lost the BT connection pushing the Music key to select the Audio player will re-establish the connection and music is streamed to the headset. You will see the A2DP icon on the today screen when it has connected and get the chime in the headset.
Ok, thanks for that.
Just one last point, if the connection is lost while music is streaming, does the audio switch to the phone speaker instead??
My problem is I'll be listening to music on the subway then or some reason I'll loose the connection (interferance, low battery...whatever) and immediately music starts coming out the speaker, much to my embarrassment!
Thanks again!
Related
Please post here details of BT headsets that work with the new stack to stream audio,
Please include:
Headset make and model
Any issues or if it works perfect
Quality good / average / bad
Cheers!
iTECH BLUEBAND works perfectly with the new A2DP (and others!) BT Stack. Streams audio pretty well and switches to headset mode when there's an incoming call. Flawless so far!
Sound could be better, but now I need to look for a good jukebox for Pocket PC. Suddenly the JAM has become my default music player!
PS: Music drags and sometimes gets cutoff during heavy CPU activity (while I was installing some software over Active Sync and had about 45 tracks lined up on WMP!). However, the music continues from where it left off!!!
What about the Itech Clip s35?
Does anyone know I'm supposed to get the new stack to pair up with the Clip s35 so the "Default Headset" dragdown window appears and I can get the BT to start streaming MP3 music?
Keith
Hi guys,
I have a Himalaya but am just wondering - when you say you have a fully functional bluetooth stack with A2DP and which receives calls while you listen to music, do you mean a Microsoft stack on your Magician's?
Thanks
What about the Itech Clip s35?
Does anyone know I'm supposed to get the new stack to pair up with the Clip s35 so the "Default Headset" dragdown window appears and I can get the BT to start streaming MP3 music?
Keith
Hey, humans!
After searching through the forums for a couple of days, I thought I would go ahead and post to ask if anyone has a fix for the following problem...
I recently purchased the Jabra BT 620s stereo Bluetooth headphones, tapped the A2DP cabs, and got wireless stereo working (along with all of the buttons and the mic) right away.
Unfortunately, every time I turn off the headphones and reconnect them, they connect to the phone as "Hands-Free" only. In this state, I can use the answer/call/play/pause/etc. buttons and the mic, but audio is delivered through the 8125's speakers and not the headset. To fix it, I have to open the BT settings, click on the Jabra phones, Refresh (because it still says that the set is connected as "Hands-Free" and "Wireless Stereo"), and reactivate "Wireless Stereo" every time I want to listen to music.
Is there any trick/registry tweak that could help me bypass this extra step? Oh, and does anyone know of a media player that doesn't hog my resources like WMP, uses AVRCP, and can play streams?
Thanks in advance!
In response to my own (2nd) question...I've read that TCPMP respondes to AVRCP commands.
Does anyone know how to get them to work with the Jabra BT 620s headphones?
I'm continuing to look for a solution to my problem and find an alternative to WMP10, which sucks up so much memory.
I have finally managed to get Pocket Player 2.72 (http://www.conduits.com/products/player/download.asp) working with AVRCP. Although it is supposed to work right out of the box, I tried using it and received no feedback from the Jabra BT 620s's buttons.
While looking for a WMP today plugin -- one that I had hoped would have a smaller footprint while still allowing AVRCP controls to function -- I came across a post and eventually found a .dll for Pocket Player that allows me to use my Jabra's controls to influence the player.
Unfortunately, Pocket Player is a woefully bad player (even worse than WMP10 in my opinion!) and I can't get much use out of it because it “skips” constantly and forces the screen back on (it doesn't automatically shut off again) with every command from the headphones. However, for everyone who prefers PP and can't get Bluetooth to work through it, trying downloading this rar file (http://www.modaco.com/index.php?act=Attach&type=post&id=19163), unrar'ing it, and placing the enclosed .dll in your Pocket Player directory.
I personally really like pocket player, but you need to wait for v2.73 out soon apparently. If you go to conduits forum you can see alot of info on this issue.
I find it plays beautifully thru iTech Clip R35 (I admit I have a different device ie jamin).
But to your first point, I still have that problem as well, I have to manually switch on the bluetooth stereo option, I haven't found a solution for that yet.
cheers
groverbot said:
Hey, humans!
After searching through the forums for a couple of days, I thought I would go ahead and post to ask if anyone has a fix for the following problem...
I recently purchased the Jabra BT 620s stereo Bluetooth headphones, tapped the A2DP cabs, and got wireless stereo working (along with all of the buttons and the mic) right away.
Unfortunately, every time I turn off the headphones and reconnect them, they connect to the phone as "Hands-Free" only. In this state, I can use the answer/call/play/pause/etc. buttons and the mic, but audio is delivered through the 8125's speakers and not the headset. To fix it, I have to open the BT settings, click on the Jabra phones, Refresh (because it still says that the set is connected as "Hands-Free" and "Wireless Stereo"), and reactivate "Wireless Stereo" every time I want to listen to music.
Is there any trick/registry tweak that could help me bypass this extra step? Oh, and does anyone know of a media player that doesn't hog my resources like WMP, uses AVRCP, and can play streams?
Thanks in advance!
Click to expand...
Click to collapse
Hi, I just bought the BT-620s and have exactly the same problem you have mentioned, otherwise a great BT headset.
Did you ever manage to find a fix for this problem?
Hi,
I have never owned a BT headset before, so I have some questions if you are willing to help me.
If I read some specifications (for example from Jabra BT8010), a BT headset could have 2 modes :
- Phone mode (mono)
- Music mode (stereo)
What is exactly the music mode? Does it mean that it controls Windows Media Player?
Or it has its own media player?
How if I want to play VIDEO (using Tcpmp for example), can I use the Music mode?
Mostly I will use the BT to watch movie and play games ....
PS: Do you use Jabra BT8010 with Kaiser? How is it?
Thanks,
since i know how frustrating it can be not to get an answer..maybe you prefer a soso answer to no answer...;-):
i used to have a stereo headset nokia hs-12 or so...but this is already some time ago...
so the way it basically works: upon pairing it will say that it supports music and phone.
depending on the layout of the headset (and the achieved compatibility with the handheld device) you will be able to control some to most features of the media players in the device. like play, pause vol up vol down, FF, RWD.. my headset worked well with windows media player, also with resco radio..tcpmp i did not have at that time yet.
hope this gives you an idea.
Andy
I think the difference is that the Phone Mode or Mono mode means that there is only ONE audio channel... suitable for making and receiving calls while the Music mode or Stereo mode means that it has TWO channels which is suitable for headphones because they have to channels.
Phone Mode BT devices can play your music but only out of one channel and in all cases Phone Mode BT devices only have one ear plug.
Music Mode BT devices can play your music or any sound for that matter out of both channels which is why they are in headphone form with two ear plugs.
MONO=1
STEREO=2
This is my take on this but please correct me if I am wrong as I would too like to get to the bottom of this.
actually that is not correct.
the so called A2DP profile is AFAIK only supported by stereo BT headsets/headphones. a mono headset will NOT get any audio sound under normal circumstances. However one can tweak the registry -and there is also software that does it - in order to direct the audio output to the headset.the price for this being, that as long as this function is active, voice dialling from the headset will not work, since this is the function that is being used to switch the audio gate.
Now, in the case of the 8010 this should be different, since it is basically a stereo headset with a detachable 2nd earpice. this one should therefore always work in A2DP mode and therefore enable audio throughput without any further tweaks.
I just picked up a BT8010 yesterday -- my local Fry's had them half-price. Stereo performance is pretty good, but there's a bit of skipping (i.e. momentary dropouts of the audio). There's a firmware update available from Jabra -- that may help.
Haven't had the chance to use the BT8010 as a phone headset yet, so I can't address that.
I was wondering if the audio quality and sound stuttering has improved by using BT stereo headphones with Blackstone...
I have a trinity and i still haven't found a setting nor a rom nor a BT stack which handles my samsung headphones with a decent quality and no stuttering...
My cheap nokia 6234 has a solid connection and a good quality sound compared to the trinity... Plus, the A2DP connection slows my device down so much you have to pause if you want to do anything with it...
So if anyone could report about using bluetooth headphones with Blackstone, I would be very grateful as that would help me decide whether to buy or not
Thanks a lot
--
Fra
Great
I have the Touch HD for a few days now with the BH S100 HTC bluetooth headset. I have to say that the sound quality is great. It is even better than my conventional mp3 player.
Stable, never lost connection, etc.
Hope this helps.
I tried it today, with my Sony-headset.
It seems to stutter, though, for the five minutes I tested.
I have the Blackstone from seven day and the A2DP is OK with my Sony_Ericsson HBH-DS200.
The sound is very good and the pairing with the phone is immediatly in about 1 second.
Regards
reasonably OK with my Jabra BT620s. However, quality in BT A2DP is not really comparable with wired headsets, and i got some losses when passing nearby EM sources like wifi, etc.etc.
I needed to enhance the quality with Schaps Advanced Config Tool.
Alpine radio
I have an Alpine radio with bluetooth capabilities in my car, and for the first time I have a great connection with my HD. My Touch Diamond stuttered.
Thanks a lot everyone!
I guess it depends by the headset model and interferences then...
I'm still looking for a shop which would make me play with it for a little while...
i have a pioneer deh 700bt and the headunit set up was easier than the nokia n95
streaming music was a bit weird, the quality was very weird, kinda like very low bit rate streaming on mp3s at times, then fine again.
my n95 music used to pause when i took the key out of the ingnition and the stereo turn off
however the HD just keeps playing, but not through the speaker phone....just see it still playing
bit disappointed, and looking for a fix
I've only played for 10 mins, so i'll let you know if i find some more.
I have an Audi A3 from 2005 with a original BT carkit.
Can I use my HD to play some music ?
I can make phonecalls without a problem, if I adjust the volume of my carradio the volume from the HD is also adjusted.
But is there a possibility to play some music ?
Has anyone tried the Plantronics 855 Voyager stereo headset yet?
Also, I'm currently using the Jawbone 1 and noticed horrible interference/noise in the ear piece when the wifi is on, anyone else experience this?
I've never had any problems with the diamond and now with the hd. Like the senior man said, you need to increase the bluetooth bitpool values either in the registry or by using schaps tool. The difference in quality is immense - low values will make high bitrate music sound 64 kbps so you need to change this. Of course, the higher the bitpool the more chance of dropouts but I run at 60 and rarely, if ever have any dropouts.
Sennheiser MM200
Now if tested for almost one day my HD with my new Sennheiser MM 200. Amazing!!! The use of the MP3-Player switched with the use of the remote control to a new level. During sport display can be switched off(no need for touch display-less power consumption (try to give a more compareable info in future)), full control of play/pause/fwd/rwd/volume function. There is no delay of the HD in using the remote nor any transmission interruptings. Now the HD is with armwrest a perfect sport companion. The sound of the earphones - haven't had any better sound (and i've tried a lot of earplugs). Neckstrap fits perfect, mic in perfect position, clear speech and due to perfect noise reduction of the plugs even in noisy areas perfect understanding.
The Sennheiser was just charged the first time - i'll report the stamina.
So far -
I am using the i.Tech S35 bluetooth clip also on my HD now, and sound is very good, with WiFi on. Advantage of the clip is that one can use any headphones with it.
http://dontknowme.at/http://www.itechdynamic.com/en/products_spec.asp?cid=2&pid=02041
Louis said:
I have an Audi A3 from 2005 with a original BT carkit.
Can I use my HD to play some music ?
I can make phonecalls without a problem, if I adjust the volume of my carradio the volume from the HD is also adjusted.
But is there a possibility to play some music ?
Click to expand...
Click to collapse
no ... thats just working with A5
(is trying too much effort?)
Louis said:
I have an Audi A3 from 2005 with a original BT carkit.
Can I use my HD to play some music ?
I can make phonecalls without a problem, if I adjust the volume of my carradio the volume from the HD is also adjusted.
But is there a possibility to play some music ?
Click to expand...
Click to collapse
It's not possible to play music, only phone functions are available.
I've tested the HD with the PARROT MK6000 and everything works very fine, also A2DP, Quality is good.Phone Functions great, Phonebook synchronize works perfect
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
http://images.google.nl/imgres?imgu...ox-a&rls=org.mozilla:en-US:official&sa=N&um=1
Now here's the problem. When I pair the phone with the Headset, it pairs the 2 services HANDSFREE & WIRELESS STEREO. Then i can listen to music via the headset.
When i turn the headset off and then back on again, it switches on the HANDSFREE ONLY !! And i have to go thru the following process to turn on the WIRELESS STEREO again:
1. on phone, click on Bluetooth Devices
2. select the headset device to view the 2 services (handsfree and wirless stereo). Both are selected. Deselect the Wireless Stereo service.
3. SAVE
4. on phone, click on Bluetooth Devices
5. select the headset device to view the 2 services (handsfree and wirless stereo). Re-select the Wireless Stereo service.
6. SAVE
Then it works again and i can listen to my music again.
Its a very annoying process and I wish someone could help me to explain if there is a faster way? Does everyone also have to go thru this process or am i doing something wrong?
Does there exist a program that can automate this process or any other solution?
looking forward to replies!
there are more than one small app to make it easy.i found one that works on my HD. uploaded for you here:
http://rapidshare.com/files/207816065/13-BTaudioTransfer.cab
next time try and do a search....
thanks a lot! It actually works! cant imagine why microsoft creates an OS without this built in as standard !
thanks.
ronald_adi said:
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
http://images.google.nl/imgres?imgu...ox-a&rls=org.mozilla:en-US:official&sa=N&um=1
Now here's the problem. When I pair the phone with the Headset, it pairs the 2 services HANDSFREE & WIRELESS STEREO. Then i can listen to music via the headset.
When i turn the headset off and then back on again, it switches on the HANDSFREE ONLY !! And i have to go thru the following process to turn on the WIRELESS STEREO again:
1. on phone, click on Bluetooth Devices
2. select the headset device to view the 2 services (handsfree and wirless stereo). Both are selected. Deselect the Wireless Stereo service.
3. SAVE
4. on phone, click on Bluetooth Devices
5. select the headset device to view the 2 services (handsfree and wirless stereo). Re-select the Wireless Stereo service.
6. SAVE
Then it works again and i can listen to my music again.
Its a very annoying process and I wish someone could help me to explain if there is a faster way? Does everyone also have to go thru this process or am i doing something wrong?
Does there exist a program that can automate this process or any other solution?
looking forward to replies!
Click to expand...
Click to collapse
I have a same problem with my car audio, but when i install this BT program in lower post they connect me only to handsfreee, and when i go to play music they disconnected my car BT audio.
Just for you interest - this does NOT make A2DP work.
Mirror site please!!!
KukurikU said:
there are more than one small app to make it easy.i found one that works on my HD. uploaded for you here:
http://rapidshare.com/files/207816065/13-BTaudioTransfer.cab
next time try and do a search....
Click to expand...
Click to collapse
Can someone please mirror this download, my limit is up on.
Here is the source.
I got it downloaded, and here is the developers web site
http://trianglepowers.com/PPC
(sorry all, could not find an edit for my last post)
Pair your stereo headset and select the Heaset and Wireless Stereo profiles, this will work from start.
Next time you turn on your stereo headset it will only connect as standard headset (ie mono for phone calls)....
Just press the play/pause button on your headset and it will auto connect to A2DP stereo also.
Simple EH?
Tried that!
I have tried that, and do it on my laptop (another set and stereo profile only), it may be dependent on the headset you are using.
The Triangle Powers BT Stereo is mono output only, and made the audio quality poor on my HD. http://trianglepowers.com/PPC/ViewApp.aspx?ID=52
I installed teksoft A2DP Toggle 1.1 this morning http://teksoftco.com/forum/viewtopic.php?t=1885 and added it to the program button in TouchFlo, not the today screen. it seems to work fine if you press the button twice, better than 7 clicks. (My HD info in the signature, Telstra TouchFlo replaced by Standard HD)
GSamways said:
I got it downloaded, and here is the developers web site
http://trianglepowers.com/PPC
(sorry all, could not find an edit for my last post)
Click to expand...
Click to collapse
Looks like promising software, I will play with it and update in few days with pros and cons
GSamways said:
I have tried that, and do it on my laptop (another set and stereo profile only), it may be dependent on the headset you are using.
Click to expand...
Click to collapse
If pushing the Play/Pause does not connect a previously paired BT Stereo Headset to your HD then it is not a true A2DP profile headset.
See if you can get your hands on a pair of folding Sony DR-BT22 headphones.
True A2DP with built in mike to answer incoming calls. Bass is very good and full funtion with the HD.
Highly recommended.
ronald_adi said:
Hi! This issue has plagued me ever since i am using windows mobile. I own a TOUCH HD (though i think this issue is also with other windows mobiles) and a A2DP Stereo bluetooth headset from Sony.
Click to expand...
Click to collapse
ronald_adi said:
Hmm! I pair the HD with a great bluetooth headphones from Sony I got in Tokyo recently (not the same as yours). I dont have any problem with the A2DP connection at all. I have perfect high audio definition thru to the headset.
Sorry not much help-but it may be the headset not the HD thats your problem!
Click to expand...
Click to collapse
Agree
You guys are correct, the smaller headsets that try to share the Play/Answer/end button are probably the issue.
I have been using A2Dp Toggle 1.1 as mentioned and link above and it works great, no loss of sound noticed.
We should start an XDA (not just HTC) WiKi to list headsets that connect or not for WM5 and WM6.
HD Compatible Headphone
I have a Sony DR-BT50 headphone that works beautifully. The sound is brilliant for Music and particuarly movies that I have transferred from DVD to the HD with MP4HT4HD!
I never thought that i would watch a movie on a screen so small but the clarity is something else and the high audio signal with the bluetooth headphones make it a pleasure! Great for long layovers at airports etc.
Any in-ear types that work?
All the sets that I have seen posted as working are the full headphone (over ear) types, and this may again be a shared button thing.
Does anyone have / know of an in-ear / earbud type that works / connects correctly
A2DP Toggle 1.1
I dowmloade that A2DP Toggle 1.1 on my phone. I use HTC TYTN1 running Windows Mobile 6 Professional and this software gives hell to say the least.
When I connect it to my headset, it works fine BUT it does not pay MP3s on my headset. It keeps on saying ERR on the icon of the head speakers (the second icon form bluetooth icon). I even asked most of the technician but no one knows anythings. If anyone knows what my probles is, please rescue me!!!
I might be doing something, please help me guys
Toggle works for me!
I had the same problem, the triangle powers prog didn't work for me. In fact the headset icon was on but no playback.
The toggle 1.1 works, none of the funcitons described on it's website are available, setup and various icons are from the home page but HTC Touch HD home page doesn't support that.
Never the less, putting Toggle in my program list and using it toggles easy between phone speaker and headset. Like someone has already said, two clicks and we're in business from starting my van to getting music from my phone on the stereo. I'm happy enough with that.
I have a Pioneer stereo with Parat built in, so I get BT audio and Hands free calls. All seems to be working perfectly now. Thanks to this thread.