After flashing with a new ROM etc..
When I go into communications, and tap on wifi.....it turns on for a sec and then turns back off. Any suggestions?
Here is what I have done so far.....
Started with: Radio v. 1.39.00, ROM V. 2.13.656.2, Bootloader 1.2
Went to bootloader 2.40(via Hard-SPL-MF.exe), Scrosler's Titan ROM 3.26 w/touchflow. and then Radio 3.42.30.
Thank you in advance for any suggestions or solutions.
Changed the battery power option under wireless to best performance.....everything works now
Interesting find to the solution. Nice work.
Please Help
I have this problem too, after upgrading to newer ROM, my Wi-fi became disabled (won't turn on) could you show me step by step how to solve this problem, you said "changed the battery power option under wireless to berst performance" could you please show me how to do it, cause i don't know how to do, i've been looking around the forum to find the solution for this problem..
Thanks in advance
upsett3r said:
Changed the battery power option under wireless to best performance.....everything works now
Click to expand...
Click to collapse
Related
Hello,
I am unable to connect with my TYTN to any wifi network, secured/unsecured. After turning wifi on (in comm manager), those lines near wifi icon (indicating that device is searching for wifi networks) appears just for 1sec, and then disappears. And that is all...
Please is there any known solution or is my wifi really dead?
My ROM: Schap's 4.31 (I already tried different ROM without any luck)
My Radio: 1.50.00.00
Thank for any answer...
Does your MAC address show ok? It may be worth having a look at this thread.
http://forum.xda-developers.com/showthread.php?t=322225
many thanks, but my TYTN is now bricketized :-(
downgrading to SPL 1.10 ok, but
while downgrading SPL (to 1.04), after message of succesfully flash on PC screen - PDA display turned off and my TYTN stops responding completely...
authorized service is my only last chance...
Sorry to hear it bricked. You could try this which has been recommended by another member before.
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
here
VC_48 said:
Hello,
I am unable to connect with my TYTN to any wifi network, secured/unsecured. After turning wifi on (in comm manager), those lines near wifi icon (indicating that device is searching for wifi networks) appears just for 1sec, and then disappears. And that is all...
Please is there any known solution or is my wifi really dead?
My ROM: Schap's 4.31 (I already tried different ROM without any luck)
My Radio: 1.50.00.00
Thank for any answer...
Click to expand...
Click to collapse
dont know if you already installed these ?
i hope it helps for you..
Pinguin666 said:
dont know if you already installed these ?
i hope it helps for you..
Click to expand...
Click to collapse
What does that .cab do?
hello,i got a big problem when i turn my htc it turns on and is alright for the moment, but after when i try to turn wifi on or audio manager it hang on and next turn of or i need to do soft reset,sometimes it vibrate and turns of after when everything load up,please help me solving this problem.
ms2405 said:
hello,i got a big problem when i turn my htc it turns on and is alright for the moment, but after when i try to turn wifi on or audio manager it hang on and next turn of or i need to do soft reset,sometimes it vibrate and turns of after when everything load up,please help me solving this problem.
Click to expand...
Click to collapse
I would have probably just done a hard reset to see if that solved the problem. This would be too annoying for me to handle and I wouldn't want to put up with that. I don't know what apps you have installed but perhaps you have something trying to launch at the same time when you turn WIFI on or Audio Manager - Strange that it happens for both of these. Perhaps you have apps trying to obtain updates or trying to connect to internet automatically once you turn WIFI on and this is causing your system to become too slow and unresponsive as it is trying to do too much at once. (doesn't explain audio manager I know) - I havn't experienced this problem myself thankfully -
now when i try to turn it on it needs few times just to boot up but when it boot up it is just hanging up after few seconds or minutes i have done few soft reset and hard reset and it doesn't help i don't know what to do.
That sounds buggered to be honest. Seems like a hardware error. I've dropped mine from about 50ft before, but it was grass. So I don't know how it really affects it. You say it vibrates when you try to turn it on?
Well, first thing I'd try is taking the battery out, then a hard reset. From then on, flash a different ROM and hard reset again after.
but i don't know how to flash the rom can you send me a link to instructions coz i am new on this forum,already i founded from the opal one,but i can't find a instruction under,can you help me.
ms2405 said:
but i don't know how to flash the rom can you send me a link to instructions coz i am new on this forum,already i founded from the opal one,but i can't find a instruction under,can you help me.
Click to expand...
Click to collapse
http://wiki.xda-developers.com/
Start reading through the WIKI to learn about flashing ROM
Do not flash OPAL Rom to Elfin - ROMS are device specific ELFIN ROM for ELFIN Device
i've had wm6.1 4 a while and the problem was that whenever i try to switch on wifi from the comm manager that round working hourglass shows and then it doesnt turn on , i dunno what happens but the symbol of wlan with the little x on it are still the same
i downgraded back to wm5 2.26 and the same problem then i installed the official T-mobile 3.08 rom and still the same problem
worthy to mention that the official ruu didnt work wz error 326 so i had to extract the nk.nbf and cook the rom again and it worked
does this mean that my wlan hardware is faulty ?
or is it a software problem ?
does anyone have the same problem? can u plz help me ?
i searched all aroud the forum and i tried to hard reset my t-mobile vario several times and still doesnt work
I'm having the same issue with my acer f900. The wifi has been sporadic, and doesn't seem to turn on with comm manager. When you go to settings/connections/wifi all you get is a configure network adapters page. All of the the settings seem to be correct, but it doesn't show any wireless networks.
the whhole forum is full of this such a questions just flash to another rom
erikvario said:
the whhole forum is full of this such a questions just flash to another rom
Click to expand...
Click to collapse
well i've tried that hundreds of times , it just doesnt do the trick still dont have wifi
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
This should correct the missing WiFi issue: http://forum.xda-developers.com/showpost.php?p=3791117&postcount=191
Hi Kiemlo
Unfortunately the key is 1 already
I try change key to 0 but results is wifi missing still
Any idea ?
Thx
what happened to cause it to be missing?
did you flash the phone witha new ROM? install a program recently?
Have yuo tried doing a FULL backup then a hard reset?
Yes I think that wifi just disappear after some ROM flashing.
But I try to flash all ROMs which I have before and WIFI not appear again in no one ROM.
I try hard reset without backup(by the menu factory reset and by voice comm+power+reset) with same result - wifi missing.
Hi,
My current rom removes wifi from the list when its connected to usb or activesync. When I unplug it automatically goes back to the state it was before, either powered off or on_and_connected!
Also, use radio rom 0.89, with 0.88 and 6.5 i had no wifi, it was present in the list but could not see any SSID's.
Cheers,
Balint
Yes I know wifi can´t activate (grey text) when its plugged to USB.
But in my case don´t matter if its plugged or unplugged - WIFI option is missing(not only with grey text)
radio is 0.89 and OS is 6.5 so there is something else broken
Not that this would help much, but I had a similar issue with my 914c while using HP's default OEM 6.1 software. The Wi-Fi used to vanish from the Comm. Manager every so often. For what it's worth, a couple of soft-resets would fix the problem sooner or later (for me, anyway). I'm using Montecristo's 6.5 now and haven't had the problem since.
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
bluejay23 said:
Yea friend soft resets - I did it thousand-times, even hard resets 1000x not help...
Click to expand...
Click to collapse
I usually run into the same problem after ROM updates. Switch it off, remove the battery for a minute, insert the battery back in and hard reset fixes it always.
Regards
Flash original ROM with downgrading radio to 0.88
Sergious: unfortunately - this wouldn´t help.
even if yes, I can´t stand original ROM
I´m going to try Montecristo ROM
Best regards
Not working WiFi is a radio problem, not ROM. Link that i gave will downgrade your radio to 0.88, then you can flash any rom
PS. Montecristo ROM ?? It is for 914...
oh I miss that so next flashing will be with keyx roms still
I will try some flash and resets by the night ...
what goes around comes around
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
bluejay23 said:
Hello all.
I have problem with WIFI.
When I look into SETTINGS/CONNECTIONS/WIRELESS MANAGER, I´m missing WIFI there => Only Bluetooth and Phone is shown.
I try reflash radio (0.89), original ROM, some ROMs from KEYX but nothing happened
After reset to factory settings still nothing.
Could you please help me with this?
Thanks in advance
Click to expand...
Click to collapse
I had the same problem with 23001 Beta 13.2 WWE, the WiFi was initially disappear from my Wireless Manager, then i change this : my network card connects to - The Internet (default is work), and the WiFi is now again show in Wireless Manager, but can not switch on, so after soft reset it works ok...
Zemun_PFC : thanks you for your advice - its so close to solve my issue.
I did what you say and
1) after soft restart BLUE LED blinking(means some wireless active - BT was off before restart so I suggest WIFI will be working) BUT
2) when i go to SETTINGS/CONNECTIONS/COMM MANNAGER and click on wifi -> waiting icon then nothing happened - STILL only TURN ON - BUT SHOULD BE ON already => so on/off trigger doesnt work
3!!) when I´m in COMM MANAGER and click on SETTINGS in bottom right corner I see WIRELESS LAN - this not happened before!!
4 when I´m click on it it show only BLUETOOTH and PHONE settings :/
You helped me a few with it
I must solve it
bluejay23 said:
Hello everyone who can helps with me
I have some more informations.
After flash original HP ROM phone always show message problem with DEVICE.EXE until I disable sending report.
When i flash some KEYX 6,5 ROM this message doesn´t appear but when I look onto task manager DEVICE.EXE is mostly of the time under 90% of CPU.
With this battery is drain too quickly too.
This is may be the bad trick :/
Somebody knows it ?
THX
p.s. wifi still missing
Click to expand...
Click to collapse
some of my roms (older version) had a issue when you use a2dp and turn off bt. Restart then device.exe will take most of the cpu
Keyx : yes you are right - I flash another one from you, now is device.exe issue cleared.
I did downgrade my radio from 3.42.50 to version 1.x using SPL 0.41
like someone's thread on xda to get standalone GPS.
Now I have an issue, seems like as u said, some portions of radio aren't overwritten.here some symptoms I got :
1. when booting, WM6 said "Phone Off". in comm manager its status is Flight mode. when I turned on the phone, a pop up shown "Phone is off, do you want to turn it on?" I press yes, but the radio shown no signal. when I tried to make call, phone was turned off again. Can't make any calls at all.
I try with some of official and customize rom.Result is the same.
2. when I enter EPST ##778 and make some changes and then press OK, it said "Turn on LPM failed. Press OK to reset device".
Software and Firmware version can't change
It still 3.09.666.1 and radio rom is 3.42.50.
CDMA setting/EPSt show the item "EVRC enabled" is out of range.
EVRC Enabled: Disabled
Home page: Wild
Home Orig: EVRC
Roam Orig: .......
Can't change anything...It will stop with Written Item "..." error
3. when I use QPST to make PRL changes then press Write to phone, the gauge bar showed 100% but then the device automatically reset (soft). The QPST then showed message something like "Writing process not finished".Same problem shown when I tried to back to 3.42.50 with SPL 2.31.
So, any ideas to help this noob?
Thanks a lot
I am quote this word form
edimonoarfa
http://forum.ppcgeeks.com/showthread.php?t=26082
Dangers of downgrading after installing GPS radio (and a little on signing)
Please help me...
I try to solve this problem for a week.
I read in this forums and xda.., I couldn't find the solution.
What should I do?
Anyone can help,
plz contact by E-mail
plz help , or give me an advise
You shouldn't have downgraded the radio. If you got your hands on ImCoKeMaN's guide, you probably should have read it fully before doing anything. In any case, try flashing the Bell rom, which has 3.42.50 on it (it is a stock rom, so you might be in luck). That might help...
Hey did you fix your problem??
im having the exact same problem. any help anybody?
chrisonline909 said:
im having the exact same problem. any help anybody?
Click to expand...
Click to collapse
Did you read my post?