Database Users

WM 2005 & ActiveSync 4.0- Solution

Somebody has trouble with WM 2005, ActiveSync 4.0 (in PC) is working not stable or hanging all the time and me too- Magneto with WinXP SP2, office 2003 SP1.
In my experience some solution can be improved as following:
1. ActiveSync via IR - very sample but too slow
2. ActiveSync via Bluetooth - sample and fast
3. ActiveSync via USB, we need to do some steps
+ Turn off firewall of OS windows
+ Open network cards on your Himalaya:: Settings/ Connections/ Network cards
+ Click "Remote NDIS host" and you can see: Marked " Use specific IP addres"
+ Click " Use server-assigned IP address"
+ Click OK
+ Connect your device to PC, ActiveSync must be working at least in my case

,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb

,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb

??
@ xpirate
You can try remove activesync 4.0 and reinstall again, reset PC, turn off firewall and reconnect.

the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!

deadparrot said:
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
Click to expand...
Click to collapse
I noticed the same problem with AS 4 - it would only synchronise Favourites and Files.
Read the error messages carefully and you will find one telling you to use the 'Detect & repair' option on Outlook. I did so and it synced properly.
It was when I went back to Outlook Express that I realised that my OE wasnt the default email client anymore - Outlook had taken over that function. I made OE the default client again and AS stopped synchronising - went back to the same old error.
From the above I can only conclude that AS4 will only synchronise with Outlook and not any other PIM programmes. It also requires Outlook to be your default email client if you want to sync - slimy lil microsoft trick.
If you have a firewall, you will also notice that ActiveSync tries to send out email messages - this is both annoying and scary. Who are these messages intended for - Microsoft? I have blocked AS4 from sending emails on my firewall, but I still have to do a 'detect and repair' which sets Outlook as the default email client everytime I want to sync...

Problemas with the activesync
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
thanks for the help.
Txemuki

Re: Problemas with the activesync
belaten said:
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
Click to expand...
Click to collapse
I got the same problem with my Win2003Server box.
If you are running XP then you need to apply Service Pack 2
If you are running 2003 then you need to apply Service Pack 1
Seems that these packs have files "netrndis.inf" and "Usb_Rndis.ndi" that fix our problem
If you will find these files could you pls send them here? I dont' have SP1 installed and cant find these anywhere ((

I can confirm this.
On my office notebook I don't have SP2 on XP and Activesync does not work via USB (Bluetooth works).
On my home PC I have SP2 on XP and Activesync works via USB.
I guess I have to try to get these files somehow.
Patric
Update: OK, I got netrndis, but I don't have usb_rndis...

Hi Patric,
Thanx for the file!!!
Can you also post: rndismpx.sys AND usb8023x.sys ?
So, hope we will find a solution for non-SPed WinXPs and maybe for non-SPed Win2003
Thx!

OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Cheers Patric

Hi Patric,
pschoch said:
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Click to expand...
Click to collapse
Thank you very much for the files! No need for the "usb_rndis.ndi"
It seems to be working on XP but not on my w2k3 box :-(((
Here what to do with files on XP:
1) Open "Drivers" subfolder in your ActiveSync folder (i.e., c:\program files\microsoft activesync\drivers)
2) Copy all three files there: netrndis.inf, rndismpx.sys & usb8023x.sys
3) Put your I-Mate to the cradle
4) When device installation wizard will ask you to proceed with Automatic or Manual installation you need to Choose "Manual". Then open your activesync's Drivers folder. Choose "Windows Mobile-based device" and wait until installation is finishes...
Good Luck!

hi there..
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
thanks for help

johnz said:
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
Click to expand...
Click to collapse
Have no exact idea cause didn't have such, but try to:
1) Disable ALL possible firewalls
2) Make sure your current ActiveSync Partnership is not "Microsoft Exchange" and if it is, just delete current partnership and create a new one
3) Remove "Email" from your sync list?!
4) Remove "Favorites" from your sync list?!

thx..
but..I have no firewall turned on (i had only microsoft firewall, it's off)
I have never connected to an exchange server, my partnership in activesync is only with my pc.
I have reinstalled activesync, not useful
removing items could help.. i'll give it a try
i'm going to sleep for now, thanks..
I *think* longhorn is very nice, but i'll stay with xp

I copied everything and did the procedure... now I get the error message 'Device can not start (10)'...
Not successful yet...
Patric

can instal 2005 on my xda2
hey i downloaded the win2005 and active sync 4 but when iam flashing ma rom and instaling the file an error says that cannot connect or smthn or an error in connection why is that ?

any progress
Same error Pschosch
No Progress what so ever!!

ActiveSycn 4.0 Works after all!!!
I fixed my ActiveSync USB problem...
I downloaded ActiveSync 4.0 from Microsoft's web site and instlaled over current AS4.0.
When I placed my MDA2 on the cradle, the same problem persisted, so with the PDA still in the cradle I unplugged the USB connector and then connected it again but to another port. Now the system detected a "new" device and installed properly this time so now it works 100%.
I hope this procedure helps you too!
By the way, I'm on Win XP (no SP2) and USB 1.1
Best regards,
Rayan

Does the activesync 4 can sync WM2003SE? cuz i got problem saying that version incompatible..

Active Sync 4.1 and VPN - PLEASE HELP!!!!!

Hi All,
Same ole Active Sync Error message problems that others have complained about:
"Support Code 85010014"
I am using Active Sync 4.1 and Outlook 2003. I am using my company's laptop so uninstalling/installing Outlook was not an option. I do think the error is appearing b/c I am trying to sync while Outlook is off-line. Common sense says just put it on-line. Tried that! My Outlook will only work online when our VPN is connected but is appears that Active Sync and our VPN are not compatable. Connect device - VPN gets disconnected. Connect VPN - then device is no longer connected. Our VPN is by Nortel. Any suggestions??
HELP!!!!!
edit: added Active Sync version

bump....I really need help with this one. Without being able to sync with my Outlook it almost makes the device useles.... Thanks.

Hi,
Have you tried moving your storage to your computer? I did it on my corp laptop and I think it was part of the fix for me. I believe it is called remote store if you do a search in help you should find the directions. If not then post back and I will post the ones our it folks set out.
Or perhaps you need the usbswitch.exe program to change the connection to usb serial then it might not knock off your vpn connection.

Where else to try???
Ok...so I got it that no one can figure out a solution to this problem. Can someone please suggest some place for me to go? I tried searching Microsofts website for a forum/newsgroup I can post this question to but I came up with nothing. Any suggestions would be really beneficial!!!!
Thanks,

Re: Where else to try???
ms_guy99 said:
Ok...so I got it that no one can figure out a solution to this problem. Can someone please suggest some place for me to go? I tried searching Microsofts website for a forum/newsgroup I can post this question to but I came up with nothing. Any suggestions would be really beneficial!!!!
Thanks,
Click to expand...
Click to collapse
How are you connecting your device? Bluetooth,USB, WiFi...? Maybe some more details.

You shouldn't need to reinstall Outlook. Try the following:
Right Click on "Mailbox - Person Name".
Choose Properties.
Click on Advanced.
Click on Advanced.
Tick "Use Cached Exchange Mode" (make a note of the old setting).
Click on General.
Select "Manually control connection state" (make a note of the old setting).
Tick "Choose the connection type when starting" (make a note of the old setting).
Tick "Connect with the network" (make a note...).
Close the dialogue with "OK", then all other dialogues.
Close Outlook.
Re-open Outlook.
Choose "Connect".
Allow Outlook to synchronise.
Close Outlook.
Re-open Outlook.
Choose "Work Offline".
Disconnect your VPN.
Plug in your phone.
Regards,
Jon "The Nice Guy".

Another tip???
Jon,
Thanks. I just tried that and still got the error message. I followed every strep you wrote, one-by-one!! But the error message still came back up. :?
Also, I am trying to do this via USB. The laptop is not BT capable and I broke the IR window during one of the many drops it suffered from.
Thanks.

SOLUTION FOUND!!!!
ALAS!!! A solution has been found. I found the link to the site below in the Microsoft ActiveSync newsgroup.
http://groups.google.com/group/microsoft.public.pocketpc.activesync/msg/7c134690e78923cb
Basically they suggest removing a script blocking of an antivirus program via the Windows Registry Editor.
It worked like a charm. It took a few minutes and I still haven't tested to see if it can be done while Outlook is on-line but I can deal with syncing while it is off-line.

For anyone having problems with activesync - my solution...

Okay - I was having no end of problems connecting to Activesync and syncing to Exchange (local desktop would work ok), sometimes activesync on the desktop pc would stay at 'connecting' other times it would try to connect, but fail with error code 80072efd or 0x85002003. I also kept getting the error message on the PDA - unable to connect with your network settings (or something like it...).
After a couple of days trying to get it working (and occasionally succeeding after hard resets etc) I started investigating...
So, I checked a few things... Activesync 4.X uses a Remote-NDIS host on the PDA to make an IP based lan-type connection to your pc. Check your settings in
Settings > Connections > Network Cards > Network Adapters
for the 'Remote-NDIS Host'.
Mine had been set on 'Use Specific IP Address'. Change this to 'Use Server-Assigned IP Address'
Now check that it says ' My network card connects to' and that work is selected.
Now check Settings > Connections > Network Cards > Connections'
and check that the proxy server states - This network connects to the Internet' and that there is no proxy server specified.
I don't know if this will sort any issues out for anyone else - but it worked a treat with mine, so having spend days trying to get it working I thought I would share my horribly annonying experiences!!!
Hope it helps,
Liamo

on secoind thoughts - this has caused me more problems... grr I hate activesync - ignore my babbeling....
If I sort it properly I will post again..
i'm off to eat some apple-humble pie.
liamo
:-(

Okay,
so I uninstalled version 4.1 of activestink and installed the latest version 4.2. I created the pairing and hey presto - it's synching again.
Yup - it's great fun.
ohh, I also hard-reset in between 'cause I was annoyed!!!
;-)
liam

this worked for me.
i too faced the 'spinning wheel' problem with active sync.
i figured out that it was the configuration of the desktop or laptop and not the wizard as such.
1. after connecting the USB, i cud see messages like RNDIS device ready and all.
2. after this click on the lan icon in the taskbar of desktop. it displays all the lan connections. select the one that is for windows based mobile device.
3. in the properties for this lan connection, in general tab, check the box for Internet protocol.
4. In the advanced tab, click on settings for windows firewall.
5. check if activesync is added to the exceptions list. if not, check the box for activesync. click ok.
this should solve the problem. i sometimes have to do each time i connect thru usb.
hope this works.

hey guy i also had the same problem and although the first post was somewhat helpful, i still had to take an extra step in order for activesync to connect properly.
1. after changing to " Use Server-Assigned IP Address" in the connections tab i then had to:
2.go to the "usb to pc" interface and uncheck "enable advanced network funciotnality"
thanks for this post - i couldnt get my activesync to woork for the past 5 days

Activestink 4.2 won't even start on my computer :lol:
I don't really need it anyway :roll:

Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???

moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:

great man! i tried everything and this really works. thanks a lot

mrjay said:
great man! i tried everything and this really works. thanks a lot
Click to expand...
Click to collapse
You're welcome
It was driving me crazy the first day I had my wizard.
you can also use a registery hack:
use your favourite regeditor;
change
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“RNDIS“
into:
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“Serial_Class“
Erase:
HKCU\Comm\RasBook\’USB\“Entry“
do a Soft-Reset.
check after the reset if a:
HKCU\Comm\RasBook\’USB\“Entry“ key has been made for serial communication otherwise it won't work.

the-equinoxe said:
moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:
Click to expand...
Click to collapse
How can I run this cab if I can't use Activesync? (My PPC (MDA Pro) is in a vanilla state)

in my case was easier because i was able to copy on the ppc but i couldn't copy from it. trry to load it somewhere where you can take it from with your phone.

I've tried d/ling it from here but It doesn't save as a cab file.

Slave1 said:
the-equinoxe said:
moedinha said:
Anyone got stuck when Activesync keeps "Retrieving Settings" endlessly ???
Click to expand...
Click to collapse
You should make the activesync on the phone a serial connection instead of a ndis connection, this cab helped me:
Click to expand...
Click to collapse
How can I run this cab if I can't use Activesync? (My PPC (MDA Pro) is in a vanilla state)
Click to expand...
Click to collapse
This is the trick I found out:
Connect your phone, wait till activesync starts.
Run taskmanager on your pc and kill:
WCESMgr.exe and wcescomm.exe
Go to your explorer (again PC) and doubleclick:
C:\Program Files\Microsoft ActiveSync\wcescomm.exe
Activesync will run now without errors (but doesn't sync!).
click on explore, copy the cab to the phone.
Disconnect the usb-cable, start the cab on the phone.
Reboot the pc, reconnect the usb-cable and activesync will sync again

the-equinoxe said:
mrjay said:
great man! i tried everything and this really works. thanks a lot
Click to expand...
Click to collapse
You're welcome
It was driving me crazy the first day I had my wizard.
you can also use a registery hack:
use your favourite regeditor;
change
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“RNDIS“
into:
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDriver“=“Serial_Class“
Erase:
HKCU\Comm\RasBook\’USB\“Entry“
do a Soft-Reset.
check after the reset if a:
HKCU\Comm\RasBook\’USB\“Entry“ key has been made for serial communication otherwise it won't work.
Click to expand...
Click to collapse
I've make the registry changes but after soft resetting, no HKCU\Comm\RasBook\’USB\“Entry“ key has been created. Can you please post the contents of that reg key so I can put in manually otherwise is there something else I need to do to get the key created?

I have also had a similar problem with my computer and my Qtek 9100 not "finding each other" properly for a sync over USB ince the day I bought it over a year ago. Haven't been too bothered with it, as I've synced via BT instead (which works perfectly).
Still, technology that doensn't work properly seriously anoys me. Having tried all other available and suggested solutions I stumbled across the-equinoxe's recepie of reg-changes. After following the instructions I also ended upp with no HKCU\Comm\RasBook\’USB\“Entry“ for serial communication.
Therefore, I would like to repeat sunseakers call for help... Could anyone tell me what the contents of that entry is supposed to be?
Thanks for any help!

...i don't know if this will work for you, but i attached mine usbreg...

Thanks Krinkie.

ActiveSync must be one of the most frustrating applications out there. I have tried all recommended fixes and still cannot get ActiveSync to recognize my MDA. The last time I did a sync was 9/06. Too much BS using this application. I have searched all over the web and cannot find any application that will allow me to update my PIM file without ActiveSync. So, I guess I will finally give up on this. Thanks to all of you who have tried to help me. Thank You!!

I've been trying for days to connect to my laptop and the file above 'rndis to serial' finally did the trick... I'd read elsewhere about turning off your firewall etc, in the end I'd uninstalled all my firewall, anti spyware and antivirus programs...
Thank god for everyone here at XDA-developers... there wasn't anything useful on the Microsoft site.

ActiveSync Guest Mode

So, I have the HTC TyTn II and I sync only with my laptop and use my desktop just to transfer files and maybe install applications. The most annoying this is that ActiveSync wants to create a sync profile with my phone but I always have to click cancel and then it goes to "Guest" mode as noted on the top. I finally dug out the disassembler and nop'd out the call to the Synchronization Wizzard so it enters Guest mode immediately and quietly. Uploaded is A/S version 4.5.0 Build 5096 if anyone has a dedicated computer to upload files/download apps but not necessarily want to keep track of outlook/contacts/notes/etc
Hope someone can find this usefull.

good work!
but, IMHO, dont think this is the best solution
here's MS' official solution:
http://support.microsoft.com/kb/270136/en-us

Nice read. I would suppose the registry modification would be easier for upgrades/updates as well. Thanks for the tip.

Thanks for this! I'll try it on my work laptop tomorrow.
liay said:
good work!
but, IMHO, dont think this is the best solution
here's MS' official solution:
http://support.microsoft.com/kb/270136/en-us
Click to expand...
Click to collapse
I know that trick but it's not working for me.
When I make that key in my registry, I can connect my PDA to my laptop, and it will be in Guest-Mode.
BUT, when I open Active Sync on my device to sync with my works exchange server, I will not work.
However, when I simply cancel Active Sync partnership wizard on my laptop, (so connect in guest-mode) I can sync fine.

I hoped this would have been the solution for us.
We have a lot of users with there smartphone. Coz they use flexible workspaces The sync on several pc's. We don't want to make a new partnership every time. Canceling the partnership makes it possible to sync with Exchange. But with this ActiveSync version this doesnt work. Also the GuestOnly register change syncing with exchange is not possible.
Anyone a solution?

Activesync Didn't Synch contacts
Hi,
Pls, when connecting my Touch cruise with Activesync, i found a message (Registered owner name does not match that in device information, make sure that is speleed exactly the same) in spite of write down the owner information in the PDA as the same mentioned in Computer name, i can't sych my contacts.
Pls advice

Thanks man, a couple of posts above I said I would test if it worked.
I totally forgot to test it. Now I did and it seems to work perfect!!
WHERE CAN I DONATE TO YOU!!

kaiser4782787890 said:
So, I have the HTC TyTn II and I sync only with my laptop and use my desktop just to transfer files and maybe install applications. The most annoying this is that ActiveSync wants to create a sync profile with my phone but I always have to click cancel and then it goes to "Guest" mode as noted on the top. I finally dug out the disassembler and nop'd out the call to the Synchronization Wizzard so it enters Guest mode immediately and quietly. Uploaded is A/S version 4.5.0 Build 5096 if anyone has a dedicated computer to upload files/download apps but not necessarily want to keep track of outlook/contacts/notes/etc
Hope someone can find this usefull.
Click to expand...
Click to collapse
I get an error, "cannot find pegconv.dll" when I launch the program. I have activesync 4.5.0 (Build 5096).

AS + activetweak...
http://w15.easy-share.com/1701928313.html
fiddle with it..

nothin said:
AS + activetweak...
http://w15.easy-share.com/1701928313.html
fiddle with it..
Click to expand...
Click to collapse
I think when using this program to force ActiveSync guest mode, it just adds:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"GuestOnly"=dword:00000001
to the registry.
That tweak is not working for me.
I can connect succesfully, but my device won't sync.
Clicking "sync" on my device, just doesn't do anything.
BTW: I sync with an Echange server through LAN network.

johanromijn said:
I think when using this program to force ActiveSync guest mode, it just adds:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"GuestOnly"=dword:00000001
to the registry.
That tweak is not working for me.
I can connect succesfully, but my device won't sync.
Clicking "sync" on my device, just doesn't do anything.
BTW: I sync with an Echange server through LAN network.
Click to expand...
Click to collapse
just so you ppl know:
The trick from the MS link>>>
APPLIES TO
Microsoft ActiveSync 3.0
Microsoft ActiveSync 3.1
Microsoft ActiveSync 3.5
Microsoft ActiveSync 3.6
Microsoft ActiveSync 4.2
NOT Microsoft ActiveSync 4.5
just so you know.
wbr
V

exchange - security certificates

Hi,
i hope somebody can help me with my activesync error 0x80072F06; it says that the server security certificates are invalid, which i can't understand at all: I have my touch2 connected to my microsoft exchange server 2010 and imported my servers security certificate (which i first exported on my desktop using internet explorer). At first i tried to sync the phone at home by wifi and entered my servers local IP -> worked exactly as i should.
But as soon as i enter my external ip my certificate it doesnt work anymore and gives me the above error...
But i don't understand why i can successfully sync the phone the first time after i entered the settings and also the first time every day when the exchange server/the phone try to connect (some minutes after midnight) it works, but why not always?
I hope i could give you enough information to help me solve my problem.
saw45

I've always been able to sync without a security certificate...I don't know if this is related at all, but you can try this: http://www.mobilitydigest.com/forums/showthread.php?t=259&highlight=exchange+security

Thanks a lot, would be really great, but sadly it doesn't work under windows mobile 6.5... i tried to install the version for windows mobile 6.1 professional but it always gives me an error (unexpected error in stay config.exe) when i try to save the settings... (although i installed the 2.0 version)
is there any other way (maybe a registry setting) to disable the certificates?
thank you for your help,
saw45

can you try changing the connection speed?
mine is in dutch, but it must be something like:
settings-->connections-->USB to PC-->uncheck the option for a faster connection.

Hi,
i'm not connecting to a local pc over usb so i don't think i can change the connection speed as i'm connecting to an exchange server over umts/hsdpa/3g or wifi... I hope that was what you ment?
Thanks for your help!
saw45

Hey Saw,
Did you import the certificate with an .P7B extention? I also tried the DER encoded binary and the Base-64 encoded (both .CER). But the Cryptographic message syntax standard was the one that worked for me.

saw45 said:
Hi,
i'm not connecting to a local pc over usb so i don't think i can change the connection speed as i'm connecting to an exchange server over umts/hsdpa/3g or wifi... I hope that was what you ment?
Thanks for your help!
saw45
Click to expand...
Click to collapse
oops, than you can disregard my idea ;-)

Hi,
which way did you export your certificate/ which program did you use?
Thank you for your help, i hope this is going to solve the problem! But if its not, nobody has an idea how to turn off windows mobile asking for valid certificates?
saw45

ok i imported now the certificate in cryptographic message syntax standard (.p7b) but it didn't change anything
I really don't know what to do... ironically the perfect exchange integration was one of the points why i decided to buy a windows mobile based phone
i don't really understand why it works at 00:01 and then the phone decides that the certificate isn't valid?? When i start the phone at 2 pm the first time (that day) it also works!? But after the first sync no matter what i do it won't work again!
I really hope somebody can help me!
saw45
edit: sorry for repost