Related
Currently,
I'm using the Radio version 1.04.20 on my Dopod 900 (HTC Universal). However, my reception is not too good and it usually takes some time for my phone to catch on with the network after a hard/soft reset.
Can anyone recommend which Radio version is the best so far, in terms of reception strength and stability?
Many thanks!
If you don't use Universal while driving, change to 1.08.00, otherwise stay as you are (this is my opinion).
1.08.00 seems to have some problems with the handover between GSM cells.
using 1.6 without any pb at the moment
1.08.00 gave me problems switching between WiFi and GPRS connections only remedied with soft resets, blah...I went back to 1.06.
I just upgraded to 1.06.00. There is less delay in connecting when I answer the phone.
I see. Many thanks.
So it seems that Radio 1.06.00 is the most stable then?
Another question, the updates for Radio version, are they all generic for all HTC Universal sets, or must I find one specifically customised for my Dopod 900?
Hi,
You should be able the flash the rom into your Dopod without any problem. I have an Exec and have flashed the radio rom (1.06) last week that come from T-mobile in Germany. Nothing to complain about it yet! Works great! Check out the below link. You will be able to download the radio from there and lots of FAQs in there.
Hope this will be useful for you!
http://forum.xda-developers.com/viewtopic.php?t=38954
Regards,
Johnnie
johnnie82 said:
Hi,
You should be able the flash the rom into your Dopod without any problem. I have an Exec and have flashed the radio rom (1.06) last week that come from T-mobile in Germany. Nothing to complain about it yet! Works great! Check out the below link. You will be able to download the radio from there and lots of FAQs in there.
Hope this will be useful for you!
http://forum.xda-developers.com/viewtopic.php?t=38954
Regards,
Johnnie
Click to expand...
Click to collapse
I have flashed bmy Dopod 900 it is much better than 1.04.20 after upgrade i do not have any calls gettting dropped / It rings with in 3 rings & blue tooth audio quality is also much better strongly recco it.
Conchas said:
If you don't use Universal while driving, change to 1.08.00, otherwise stay as you are (this is my opinion).
1.08.00 seems to have some problems with the handover between GSM cells.
Click to expand...
Click to collapse
Interestingly, I would say that I've noticed the opposite with regard to data - 1.06 seems to drop a data connection on the move, more than 1.08.
Cheers,
Steve.
I have my JJ since October 2005. It worked 100% on the original ROM. Early Dec. 2005 I upgraded to the then latest Radio and ROM's. No issues.
Then suddenly From January I cannot get the Phone to work or connect to a data connection. I was told to upgrade to a 64Bit SIM which I did but still no result. I have installed every release of the Radio ROM and every ROM version compatible on the Uni up to date.
When the BAND is set to Auto it will not give me a data connection nor will the phone work. When in GSM same result. When I put the BAND in WCDMA it works 100%. Data connections work, Phone works, SMS etc. Problem is it only works in 3G areas now!
HELP, after 2 months I'm pulling out my hear and carrying my SP3i as backup.
Bump
@postman
what other applications are you using? Have you tried to start a fresh system with no third part apps (ie after a hard reset)? Have you tried to use the .cab files from i-mate for your network?
When I had a JJ I had frequent connections/disconnectiond between GPRS and UMTS. With the latest Radio on my XDA Exec I don't suffer from such frequent switching and it seems to have improved the batetry life as well. I used radio rom version 1.06.00.
J,
At the moment with the new ROM no apps installed appart from the ExtROM. Local network .cab also installed.
Problem is not as such that swtiching is taking place, problem is in BAND = Auto or GSM the Uni does not work for neither phone service nor data. When in WCDMA it works 100% without any issues. Like I said the prob. with this is that 3G is not covered like GSM, so if I leave work the phone feature is basically null and void as only GPRS/GSM/EDGE in area where I live.
Maybe the 3G and GSM/GPRS works off diff stacks / protocols or even hardware?
Yours desperate,
postmanpat
@postman, if you have tried to reflash your JJ and still the problem persists and the original problem did not occur because you added any third-party s/w then my conclusion is that you may have a hardware problem. Contact i-mate they usually reply within 2/3 days.
I would say you probably have a hardware problem !!, the GSM and UMTS aspects of the phone are very separate !!!
I haven't experienced any problems with 1.40, 1.41 or 1.43
But I was just wondering which do you all prefer?
Please state subscriber.
ChiGGz said:
I haven't experienced any problems with 1.40, 1.41 or 1.43
But I was just wondering which do you all prefer?
Please state subscriber.
Click to expand...
Click to collapse
The official Rogers radio version is 1.42.00.00 (i.e. this is what is on the TyTN's that they are now selling). I am using 1.40.30.00 and it is working well for me. Did not bother trying 1.43.00.00 since many North American users appeared to be having problems with it, leading me to believe that it has been tweaked for European users.
John
johnburn said:
The official Rogers radio version is 1.42.00.00 (i.e. this is what is on the TyTN's that they are now selling). I am using 1.40.30.00 and it is working well for me. Did not bother trying 1.43.00.00 since many North American users appeared to be having problems with it, leading me to believe that it has been tweaked for European users.
John
Click to expand...
Click to collapse
I'm using 1.41.00.10 with no problems, though I am using it voice only (no data -- Rogers can go screw themselves with their ridiculous prices /rant off).
Are the majority of problems people having with different radios more on the voice or data side of things, or is that somewhat irrelevant?
I'm using 1.41 on Rogers. I don't use 3G often, mostly just EDGE and voice. Battery only gets me through a day, but besides that, I don't have any voice quality\dropped call issues, data is stable and fast, all is good.
dtx said:
I'm using 1.41 on Rogers. I don't use 3G often, mostly just EDGE and voice. Battery only gets me through a day, but besides that, I don't have any voice quality\dropped call issues, data is stable and fast, all is good.
Click to expand...
Click to collapse
I have had 1.43.00.00 since it was released, no issue's nor have I had any issues with 1.41 or 1.40.
Rogers doesn't seam to have the issues that some of the UK and US systems are having. My guess is that there are fewer providers in Canada and less radio traffic to compete with and more concentrated towers for many areas.
messaging not working now
had sucesssfully upgraded to latest rom by black shodow, with radio 1.43, now messaging is not working, is it bec of radio.
Could somebody kindly point me to the right direction regarding any Roger's roms? I've done a search but came up with nothing
I'm using 1.47 on Rogers w/BBConnect WM5. All seems good. However, my area doesn't have 3G so I don't know how it performs in that aspect.
not worth a change, really
I had original 1.42 for a while. it worked great- got 3g in toronto (even had it in Barrie for a day during testing.)
wifi was good, and battery life was as good as expected.
I'm currently running 1.47, and I don't really notice that much of a difference. 3g seems faster, and WiFi definitely is, but I also flashed a new Rom and updated the wifi drivers too. MMS also works, but to be fair, I never tried it before.
In all, not a huge difference.
Be sure to use Lurch's cab file for setting the Rogers APN/MMS setup info- it's flawless.
ChiGGz said:
I haven't experienced any problems with 1.40, 1.41 or 1.43
But I was just wondering which do you all prefer?
Please state subscriber.
Click to expand...
Click to collapse
I'm using 1.41.00.10 on Rogers network.
I use voice and data (BB Connect + VPN).
No problems.
1.43 on all 5 of our Hermes phones since it's release and had no problems in Toronto.
We use them heavily with Data and since we're in TO we get 3G signals in most places - and I'm very impressed with battery life.
I have experienced problems with 1.46 and 1.47 not being able to receive calls while the device is active, but only a handful of others on this forum have reported the same problems, so maybe I just got 5 bad in a row.
using 1.41 in Montreal (voice only, we know how much data cost in Canada), good reception, battery last long.
I am using 1.47 after usimg 1.43. anyone else think it eays the battery a lot quicker?.
Matt
I am in the GTA and have been using 1.43 since it was released with no issues with voice or data. I was going to switch to 1.47 until I read Aoshi_'s post....now I am debating it... .
SoftBank X01HT
I am using original Radio ROM (1.16.00.00) still did not flashed it...i just received the handset yesterday. So my question is: Why i can't get EDGE? I get only GPRS (since there is no 3G HSDPA here) I know we got EDGE coverage here and the specifications of the phone says EDGE class 10, Please would you tell me if i am not using the good radio version?
Answer: not sure, maybe it's from the ROM and it do not displays "E" even on EDGE network. Speed test proof: On Rogers GPRS/EDGE : 100 kilobits/sec (It's EDGE even indicates "G")
1.51.00.10
http://forum.xda-developers.com/showthread.php?t=323957
*Fido/Roger
**so far been using 2 days
Battery seems to drain quick compared to 1.38. Very notible once using GPRS/Edge/HSPDA [gprs data seems quicker]
Signal strength is odd. Cell phone shows full strength Tytn shows 2 bars.
- Tytn shows no signal (cell phone shows full) yet when I make a call it is ok
Dropped calls: 2 (in a good area for reception)
1.51.00.10
o Battery life is short
o Missed calls
o gprs - no issues - seemed quick
Swapped to 1.43.00.00
o Battery life about the same as 1.38.00.00
o No missed calls yet - no signal drops
o GPRS seems frozen at times - required to turn off/flightmode and reactivate.
My Dopod D810 from 3 drops calls regularly.
I think every single call will drop out after about 1-2 minutes. I also notice that when my phone is 'warm' from charging or other uses, the call can drop as quickly as 10 seconds into the call.
Initially it was suggested that the drop outs were due to my Phone > Band selection being set to 'Auto' but I have since changed this to Network Type=WCDMA and GSM/UMTS band=UMTS(2100+800).
But now I'm more inclined to think it has something to do with the device's temperature....
Any other ideas other than taking it back to 3?
Try changing the Radio ROM.
I had a similar problem after changing my Radio ROM from 1.41.00.11 to 1.46.00.11. Now I`m using 1.46.30.11 version and everything is OK. I even noticed a GPS signal level improvement.
I have the similar problem too. I m with 3 Australia. Upgraded to WM6 official ROM, still observing if call drop still happened.
If not, will take back for warranty repair
I am using a HTC-branded P3600 with the official HTC GPS-enabled WM5 ROM on the Vodafone UK network. With reasonable approximation I can say that I have 0 dropped calls (including calls made or received while in car).
My network type and band selections are both "auto".
Sometimes I make calls while the phone is charging via USB from a laptop (which makes it rather warm) but I haven't noticed any dropped calls in that situation either.
Radashka said:
Try changing the Radio ROM.
I had a similar problem after changing my Radio ROM from 1.41.00.11 to 1.46.00.11. Now I`m using 1.46.30.11 version and everything is OK. I even noticed a GPS signal level improvement.
Click to expand...
Click to collapse
Excellent idea. I'm currently using Radio version: 1.35.00.11...if I go to 1.4x - are these compatible with WM5?
anonimo said:
I am using a HTC-branded P3600 with the official HTC GPS-enabled WM5 ROM on the Vodafone UK network. With reasonable approximation I can say that I have 0 dropped calls (including calls made or received while in car).
Click to expand...
Click to collapse
Thank you anonimo - what radio version are you using?
BlackBeauty said:
Excellent idea. I'm currently using Radio version: 1.35.00.11...if I go to 1.4x - are these compatible with WM5?
Thank you anonimo - what radio version are you using?
Click to expand...
Click to collapse
I`m using a WM5 LVSW edition. Used it with 1.41.00.11 for 3 months without problems, changed to 1.46.00.11 for 2 days and encountered call drop issue, changed to 1.46.30.11 and not even a problem so far.
I am using my trinity with 1.41 and WM6 (AX3L) and I really never drop a call unless I step into an elevator. I am usually on UMTS or HSDPA living here in NYC and cannot complain about my service nor the phone.
BlackBeauty said:
Excellent idea. I'm currently using Radio version: 1.35.00.11...if I go to 1.4x - are these compatible with WM5?
Thank you anonimo - what radio version are you using?
Click to expand...
Click to collapse
I'm using version 1.35.00.11
Thanks for all the replies. Went ahead and upgraded ROM and Radio version to 3.00.707.16 and 1.46.30.11, respectively.
So far, no problems with call dropouts but I haven't made many long calls on it over the last 2 days but will keep assessing.
On the previous incarnation, I had also installed/uninstalled a LOT of programs over the 6 weeks I had had the phone so perhaps that contributed to the phone's instability too...
For me, it kinda worked the other way around...
I never experienced any call droppouts when I still had the original WM5 ROM with radio version 1.33.30.10 on my Dopod D810. (I'm with 3 in Australia)
After upgrading to the ANZ WM6 ROM with radio version 1.46.30.11, I can sometimes not even establish a connection as the call is dropped after the first ring or so. The other day I had to make a call 5 or 6 time to finish the conversation...
Is anybody else having similar issues AFTER upgrading?
Hi guys,
good to see that i'm not the only one that have call drop regularly.
Well, in fact, those are not always call drops.
Sometimes i miss calls and some other times, when i want to make a call, i see that my trinity's loosing the signal and starts to search for networks. Then i have to switch off the phone through the Connection Manager, then turn it on again so that i can make phone calls.
Are you experiencing the same on your device?
I'm still using Radio ROM 1.38.00.11
Do you guys have a link where to download the latest Radio ROM so that i can try it on my Trinity?
Thanks.
boy_in_oz said:
Is anybody else having similar issues AFTER upgrading?
Click to expand...
Click to collapse
Yep, I experience drops after upgrading... But the strange thing is... even after downgrading to the shipped rom... still drops... ARRGHHHHHH
I'm just going to try another rom I think... not sure yet. Have switched my band from auto to fixed. First gonna see what happens.
Some said it is due to 3G/3.5G trying to establish a data connection (most likely for push mail) and in doing so the phone function is disabled. I did not verify this claim.
If anyone wants to test it, you might want to try:
1. disabling 3G and 3.5G
2. disabling data connection
and tell us the results!
solitary said:
Some said it is due to 3G/3.5G trying to establish a data connection (most likely for push mail) and in doing so the phone function is disabled. I did not verify this claim.
If anyone wants to test it, you might want to try:
1. disabling 3G and 3.5G
2. disabling data connection
and tell us the results!
Click to expand...
Click to collapse
I will disable HSDPA. But I cannot disable my data connection because that's THE reason I bought my device for (using it for pushmail but I can use that with UMTS/GPRS connection also, don't need HSDPA for it).
I have found if I have network on AUTO i cant make calls, phone call drops straight away.
Switching to GSM allows me to make calls, but then I have no 3G
Found that radio rom 1.46.00.11 has no calls dropping for me. So I'm gonna stick with that one.
Cheers.
Arilexed said:
Found that radio rom 1.46.00.11 has no calls dropping for me. So I'm gonna stick with that one.
Cheers.
Click to expand...
Click to collapse
Just updated to radio rom 1.41.00.11, first few calls on UMTS dropped, then after a reset calls now working.
Arilexed said:
Found that radio rom 1.46.00.11 has no calls dropping for me. So I'm gonna stick with that one.
Cheers.
Click to expand...
Click to collapse
I have this ROM actually installed in my Trinity, and i still have call drops regularly
Once more today, it started to ring, then lost signal.
I'm wondering how much people has the same issue.
I used to have the same problem. I've reflashed my phone so many times coz of that.
But it seems like my problem's finally fixed
I'm using the most updated PDAVIET wm6 rom with Radio: 1.50.08.11
Been using that for about 2 weeks, haven't had a call drop since.
However I have had a few hangs here and there.
I run a lot of apps so the memory is pretty low most of the time. Yet for some reason I'm not getting any call drops so I'm happy. (Finally able to talk for like 15 mins without breaking up)
just fyi i'm also with 3, and don't have that band setting since I luv HSDPA yet certain areas only got Telstra reception...
Calls drop out
Hi, I'm in Sydney with 3 and haven't had any problems at all with the shipped WM5. After upgrading to the latest official WM6 ROM version 3.00.707.18 from the Dopd site things went bad with phone calls and weak signals.
Now upgraded the Radio to version 1.50.08.11 and everything's back to how it 's supposed to be.
Cheers and good luck.
Flashed T-Mobile 1.43 to generic 1.66 which has improved the loud call volume and distortion greatly. But the network now says G rather than 3G are they the same?
Does this mean the network settings have changed. I have selected T-Mobile as the network internet.
Any suggestions would be welcome.
Thanks
3G is as you expect 3G, G is GPRS which is deffinately NOT 3G speed.
Chances are the rom you have installed has 3G mode off by default. Open Comm Mannager and you should find some toggle switches, one for data connection, and another for 3G. If the data connection one is on, but 3g is 'off', you will get G or E (for edge), but with the 3G one 'on' you should get H (HSDPA) or 3G
Tlooked through the settings and there is nothing that switches 3G on or off.
Anyone else seen this?
Thanks.
Suggestion:
Flash to Dutty's HG v8, which is based on the t-mobile ROM and has this option (and is much better than 1.66 stock, IMO)
I don't know about you since you are on T-Mobile, and if there is a 1.66 ROM released explicitly for the T-Mobile net, but I'll share my knowledge on this:
I'm located in Sweden and use the HD2 on the Tele2 net. I also upgraded to 1.66 and got the exact same problem as you.
I tried the 2.07 rom and the problem remained, however after 2-3 hours I finally got 3G connection.
The problem is that both 1.66 and 2.07 comes with newer radios. These Radios are the reason I can't use 3G at least. I downgraded the Radio to 2.05.51.05_2 and it all works fine for me now. I don't know if this is operator related or hardware related and hence I'd like to know if the 1.66 ROM you installed is explicitly released for the T-Mobile net.
If that's the case I'll probably need to contact my vendor since I'll probably not be able to use any of the newer Radios, which frankly sucks. Please let me know!
I have the 1.66 on Virgin UK (Tmobile and the 3G has not dropped at all.
Don't know if that helps or confuses ?
donalgodon said:
Suggestion:
Flash to Dutty's HG v8, which is based on the t-mobile ROM and has this option (and is much better than 1.66 stock, IMO)
Click to expand...
Click to collapse
+1
Ild rather have the choice, than no choice at all. Dutty's ROM has been the only flashes ive needed since T-Mobile stock ROMs.
The ROM is the latest 1.66 on the HTC website. I asked T-Mobile about it but the person did not really know. They asked if the internet connection was fast, but since I've had the phone it has been patchy. It seems reasonably fast today. We have two other T-Mobile phones, HTC Hero and Samsung Galaxy and both these also show the G and these are non flashed standard as bought.
I'm a bit nervous about using cooked ROMs.
Andy
Went over to Hungerford this morning and 3G came up so it must be a network/location issue and nothing associated with ROM 1.66.
Good to know all functionality is still there.
Thanks for all the replies.
Andy
andyrpsmith said:
Went over to Hungerford this morning and 3G came up so it must be a network/location issue and nothing associated with ROM 1.66.
Good to know all functionality is still there.
Thanks for all the replies.
Andy
Click to expand...
Click to collapse
As I said, in my case it took a couple of hours (no matter location) and the 3G appeared. Could you do a soft reset when you get the 3G at Hungerford and see how long it takes before you get 3G again?