Ok so when I'm youtubing at night and I get the low batt alert, I plug my charger in and goto bed. Then when I wake up in the monring I see E and can't seem to change it back to 3G without a soft reset. I even tried turning off data and turning it back on. Another thing, seen on some websites that there is a firmware upgrade for the X1a but when I try to upgrade it says mine is up to date but I haven't upgraded my firmware yet.
3g and E has to do with "phone", not "data connection". Try going to your comm manager and turning "phone" off and on again
Doesn't "E" stand for EDGE since all the other data connection letters are there
like H for HSDPA and G for GPRS
That's right.
"E" is Edge and this is the data connection when no "H" HSDPA or "3G" UMTS is available. That's no problem with the phone, just your network reception.
Exactly. It happens here often.
I kno that E means no 3G...but the thing is it wont go back to 3G when I do have 3G because when I disable data connection and enable it again it says connecting to Fido 3G but its still stuck on EDGE so I have to do a soft reset to get it back on 3G.
Related
hello,
after searching on "3G" in the forum, i seems that the problems are just the opposite to my question, they all want 3G to be turned off.
Now I want to connect to 3G (with the "G" icon on the staus bar).
My problem is that it always connect on "edge", with the "E" icon in status bar and when I want to make a video call, it always says that there is no connection to 3G so I can't make videocall.
Anyone knwos how to activate 3G?
I looked into the connections, but I don't want to mess in it without knowing what I do.
BTW I'm in Europe (Belgium).
Thanks
You fell into the same trap I did when I first got a Windows Mobile phone.
G means GPRS and is the lowest, simplest connection speed.
G = GPRS. "Normal" internet speed (9.6-14.4kbps)
E - Edge. "Enhanced" internet speed (normally 48kbps, but can be higher)
3G = 3G internet speed (128-384kbps). Also allows video calls.
H = HSDPA. "Mobile broadband" speed. (1.8Mbps, 3.6Mbps or 7.2Mbps depending on operator).
You'll want to go to:
Start > Settings > Connections > Advanced Network
Make sure that HSDPA/HSUPA is enabled
From then on, it depends on the signal in your area. If you find that you're having a problem getting and maintaining a 3G or H signal, you might need to get an updated SIM from your operator. I got a new SIM from O2-UK and it solved my connection problems immediately.
I see that HSDPA/HSUPA is enabled.
Could it have something to do with the settings in connections (instead of advanced network settings)?
I will also check with my provider (sim card)
Thanks for the reply
i cannot connect to the internet not using wifi. i do however h an H symbol next to my signal. i dont get why i have the hsdpa but cannot connect. i've tried anything i can think of.
*i can't turn data connection on in my comm manager, it automatically disconnects and says wap.cingular not working or gprs not working somthing like that.
*in the connection settings i pick media net wich is automatically picks att but still won't
*in settings/personal/phone i left if auto defualts for bands
*settings/connections/advance network i even tried to put it to hsda ONLY won't work
the only new lead im getting is this Zenith post saying he got new sim card so now it's working. that's all im getting at now. but im even skeptical about that
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
artesea said:
If you are not getting the 3G or H icon then you either have no coverage or an incompatible SIM.
If you can't connect to the internet you either have incorrect settings on your phone, or your network aren't allowing you on their APN.
Suggest in all cases phoning your network to get clarification.
Click to expand...
Click to collapse
you wouldn't believe how i found out i had no internet. they say'd it was in the system but it was disabled in thier system. i put in my brothers sims and his work just fine. so i told them to look at whatever his plan is and they switch to what he had. anyways long story short i found out not my settings bc you just auto configure it connectin wizards, and wasn't sims card, it was stupid att. i was getting the H icon but not an H on my signal. anyways its all done now. thanks again guys
im sure this usd to work, but recently ive noticed it doesnt. when im in a call, my data connection disconnects. normally this isnt a problem, but sometimes i will want to look something up on the internet while in a call. like i said, im sure this used to work, but now it doesnt. im on t-mobile UK with an unlimited data plan, i have a near full HSDPA signal. im running the CleanEX DsE v15 ROM with Radio 2.11.
any thoughts
should work on 3g, not on edge or gprs
don't be confused by the left hand network symbol showing an H, that's just what your network is offering. the signal bars icon must also be showing H
i have a H as the left hand icon, and a little h above the signal bars. when i start a call, the smaller h changes to a picture of a phone. if i try and use any web features it just times out. when i hang up the call, my data connection seems to have been disconnected, as it shows a T shape above the signal bars, then changes back to the H after a few seconds
I noticed when i am on a phone call, the E or H(aka data tmobile data) turns off while i am in the call and disappears. Then comes back after i end the call. Does anyone else notice this or know how to make it so it stays on even during a call? Also, when wifi is connected the data service turns off?
First off this is normal when your in a 3bars or less 3G/H area. Your phone will switch 2G while on a call if the 3G signal gets low but it won't switch back until the call is ended. Also on 2G/E you can only do one at time, voice or data. T-Mobile's 2G network is stronger than their current 3G network also.
So if your on a call and the H disappears, this means your phone has switch to 2G/E because your 3G/H signal was low. You won't see E on a call since that would be data and 2G can only do one at a time.
If you want to force 3G/H then goto settings, wireless and networks, mobile networks(I believe) and select WCDMA only under network mode. Please note that if you go into a non 3G/H area you will loose complete signal and your phone won't switch to 2g.
and yes wifi disables mobile data.
Good luck.
ram130 said:
First off this is normal when your in a 3bars or less 3G/H area. Your phone will switch 2G while on a call if the 3G signal gets low but it won't switch back until the call is ended. Also on 2G/E you can only do one at time, voice or data. T-Mobile's 2G network is stronger than their current 3G network also.
So if your on a call and the H disappears, this means your phone has switch to 2G/E because your 3G/H signal was low. You won't see E on a call since that would be data and 2G can only do one at a time.
If you want to force 3G/H then goto settings, wireless and networks, mobile networks(I believe) and select WCDMA only under network mode. Please note that if you go into a non 3G/H area you will loose complete signal and your phone won't switch to 2g.
and yes wifi disables mobile data.
Good luck.
Click to expand...
Click to collapse
Okay that makes sense because i only get edge/2g service in my house. Thanks for the response!
How do I know if my 3G is working? (Tmobile US, HD2, WP7, Leo70, very new just flashed it) What I am basically is wondering is how can I tell if my 3G is on? I do not have a data plan on my phone, due to the fact that I am always at school so I can always be on WIFI so I have no need for it. The Wifi works perfectly I just want to know if my 3G is working bc if I look at the signal it has signal but has no letters beside it like "3G" "E" etc... any help??
THANK YOU!
If you do not have a data plan no "H" "3G" or "E" icon will show up.
An easy way to test this is if you turn off your Wi-Fi and then try to load a website, if it doesnt load, no data.
i get that but what im wondering if the fact when i was running wm6.5 i had 3g written at the top by the signal bars and now there is nothing??
If you setup the APN correctly then it will establish a data connection with T-mobile whether you have a data plan or not.. When you install WP7 rom it wont have the apn set.. you have to do that manually... Also if you turned off Data in the cellular menu it wont show E/3G/H..
Some Advice if your not using the DATA then in the Cellular Menu turn off 3G and switch to 2G like that it uses less battery compared to trying to stay connected to Tmobiles 3G
T-Mobiles main apn: epc.tmobile.com or (for the proxy) wap.voicestream.com
I've just loaded a Win Phone 7 rom onto my HTC on vodafone.
On Win6.5 I used to get G, E, 3G, 3G+ as symbols at the top of the screen.
In Win 7 my 3G toggle is on, but all I get is G or H??
Is G = 3G in this instance because the toggle is on and H = 3G+ or am I only getting slow connections (i.e. really G=gprs and H is edge)? The browser speed seems OK, but.....
planty said:
I've just loaded a Win Phone 7 rom onto my HTC on vodafone.
On Win6.5 I used to get G, E, 3G, 3G+ as symbols at the top of the screen.
In Win 7 my 3G toggle is on, but all I get is G or H??
Is G = 3G in this instance because the toggle is on and H = 3G+ or am I only getting slow connections (i.e. really G=gprs and H is edge)? The browser speed seems OK, but.....
Click to expand...
Click to collapse
If you get either G or H thats good... G is basic GSM and H is faster 3G
H is HSPDA+
G is GSM
Finally An Answer For You....
In WP7, go into Settings. Tap Cellular (your carrier in this case T-Mobile) should be displayed.
Tap the 3G Connection setting to it turns on. And you're done. If you want to see if you have 3G or whatever connection at any given moment you can lock the screen and turn it back on to see the connection status in the upper left corner.
A simpler way, is like on the WM6.5 world...tap the very top portion of the screen (where the taskbar would be in WM6.5). Your battery, time, and connections status will drop down.
Voila!
hakuchi18v said:
If you get either G or H thats good... G is basic GSM and H is faster 3G
H is HSPDA+
G is GSM
Click to expand...
Click to collapse
Sir, just fyi: "G" means GPRS on a GSM network. HSDPA is still GSM, but with higher rates. "E" menas EDGE and has lower rates compared with HSDPA but hight compared with GPRS.
When you has G means your network is slow, about 1.5Mbps, when E it's quite OK,3.5Mbps and when H or 3G your network has higher rates 7.2Mbps or +
Hope it helps
Idhor Naergon said:
Sir, just fyi: "G" means GPRS on a GSM network. HSDPA is still GSM, but with higher rates. "E" menas EDGE and has lower rates compared with HSDPA but hight compared with GPRS.
When you has G means your network is slow, about 1.5Mbps, when E it's quite OK,3.5Mbps and when H or 3G your network has higher rates 7.2Mbps or +
Hope it helps
Click to expand...
Click to collapse
oh I know.. I realized it after I posted and reread it.. but then again in most cases barebones GPRS isnt really noticed since it jumps to edge right away
Sent from my HTC HD2 using XDA App
Hi, since I got this phone and I've been having problem with the data connection, wifi is working fine, but 3G is not, it shows the 3G symbol but keep switching to H symbol and back again to 3G constantly, i never been able to surf the web or do anything online on 3g connection since i got it.
I tried putting in the setting from my provider and got the samsung network app thingy but nothing helped, even after updating to NoDo.
This is really bothering me i cant enjoy the phone when im outdoors, i switched back to my iPhone 3gs temporarily.
I really hope this can be solved.
I'm thinking if there is some way to make the phone only works on 3G and turn the H off.
rhythmosis said:
Hi, since I got this phone and I've been having problem with the data connection, wifi is working fine, but 3G is not, it shows the 3G symbol but keep switching to H symbol and back again to 3G constantly, i never been able to surf the web or do anything online on 3g connection since i got it.
I tried putting in the setting from my provider and got the samsung network app thingy but nothing helped, even after updating to NoDo.
This is really bothering me i cant enjoy the phone when im outdoors, i switched back to my iPhone 3gs temporarily.
I really hope this can be solved.
I'm thinking if there is some way to make the phone only works on 3G and turn the H off.
Click to expand...
Click to collapse
H is for HSDPA and is far more faster than 3G. I reckon you run ADC on startup using samsung tools and hopefully the problems with connection will be resolved. Alternatively contact your sim provider for network configurations.
Here it also switches between H and 3G, or well it did on my other wp7 phone my (european) omnia uses 3g+. That's normal; the H mode probably eats your battery alive, and it only switches to it when your data connection is active (i.e. data is being transferred)
Your problem appears to be an Access Point problem, you can configure one yourself at the mobile connection settings page. (bottom). Check the web for the settings you'll need.
You see most phones are configured automatically by their providers, but the omnia probably isn't supported.
Hope this helps
the APN for China Unicon is "3gnet"
just add it your 3g connection will work.