Database Users

[REQ] Diamond Lock

To all good developers out there.
I (we) need a DeviceLock Application for the Touch Diamond cause existing lock APPs are to buggy for the Diamond. One is extremly draining the battery and dont lock all hardware keys another one lock all keys but slows down the device that the incoming call is not shown.
I am searching for a simple application that locks the device after I press the power button and unlock it by a slide to right on the TouchScreen. Same if a call is incoming.
Not more!!! A simple lock without additional features. Is there a way that anyone can develop this?????

What about the standard device lock that comes with WM?
You can also activate a today plugin for it, so on your today screen you press on the lock and your device is locked and the screen light is dimmed down and after some more time shut off.
Or you press the power button, then the device is locked and the screen light is immediately shut off.
To unlock you only need to press two buttons on the screen.
To unlock you can also press the power button to turn on the device and then pull out the stylus, no need to press the screen because with these two actions the device is also unlocked.
What's wrong about the standard WM device lock?

standard WM device lock is stupid! it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
If anyone know how to change colors in that screen - it would be great!

pathologo said:
What about the standard device lock that comes with WM?
You can also activate a today plugin for it, so on your today screen you press on the lock and your device is locked and the screen light is dimmed down and after some more time shut off.
Or you press the power button, then the device is locked and the screen light is immediately shut off.
To unlock you only need to press two buttons on the screen.
To unlock you can also press the power button to turn on the device and then pull out the stylus, no need to press the screen because with these two actions the device is also unlocked.
What's wrong about the standard WM device lock?
Click to expand...
Click to collapse
You now that the internal Device Lock not work if you get a call???

Alexx_B said:
it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
Click to expand...
Click to collapse
That's true! I forgot that, although I encountered that myself today.

Alexx_B said:
it is very difficult to unlock device in daylight. Gray button on gray background and dim backlight... what can be worst?
Click to expand...
Click to collapse
That's true! I forgot that, although I encountered that myself today.
Atze001 said:
You now that the internal Device Lock not work if you get a call???
Click to expand...
Click to collapse
Ok, that's a point. The screen is unlocked and things could happen unintentionally.

There is a thread about this, with some idea, but I think there is no good solution yet for this issue:
http://forum.xda-developers.com/showthread.php?t=414731

try this
Hi all
have you try Throttlelocker ?
i have install on my Diamond and it run good. light version, no battery problem, skinnable........
i think can be a good compromise.
main point: Throttlelocker can totally lock the device.
problem: you need to turn device in suspend mode manually. since now i have not found a way to use it under the backlight.
ciao

I personally use S2U2, it works perfectly on the Diamond and is fairly easy to unlock. The Slide 2 Answer feature is pretty good too - stopps you accidentally answering calls.

poedgirl said:
I personally use S2U2, it works perfectly on the Diamond and is fairly easy to unlock. The Slide 2 Answer feature is pretty good too - stopps you accidentally answering calls.
Click to expand...
Click to collapse
Which version did you use? I tested the 3 last versions and have extrem battery drain and the "home"-key is not locked.

giangishanghai said:
Hi all
have you try Throttlelocker ?
i have install on my Diamond and it run good. light version, no battery problem, skinnable........
i think can be a good compromise.
main point: Throttlelocker can totally lock the device.
problem: you need to turn device in suspend mode manually. since now i have not found a way to use it under the backlight.
ciao
Click to expand...
Click to collapse
Did throttlelocker lock the phone on incoming calls?

Atze001 said:
Did throttlelocker lock the phone on incoming calls?
Click to expand...
Click to collapse
when a call is coming you ll see the wm incoming call screen, if you dont reply phone turn to lock.
ciao

Atze001 said:
Which version did you use? I tested the 3 last versions and have extrem battery drain and the "home"-key is not locked.
Click to expand...
Click to collapse
infact on Diamond S2U2 dont lock the home button, and battery slow down very very fast, expecially last version.
with S2U2 battery life is less than one day (medium device usage)
with Throttlelocker battery life is more than 2 days (medium usage too)
due to the fact that diamond have little (big!) batteryproblem, for me better to use Throttlelocker.
ciao
here is mine........

giangishanghai said:
when a call is coming you ll see the wm incoming call screen, if you dont reply phone turn to lock.
ciao
Click to expand...
Click to collapse
And that is the problem. At work I carry my phone in my pocket and if I get a call and dont recognize them my phone answer the call. That is the reason I want a lock software that locks on calls although.

Atze001 said:
And that is the problem. At work I carry my phone in my pocket and if I get a call and dont recognize them my phone answer the call. That is the reason I want a lock software that locks on calls although.
Click to expand...
Click to collapse
maybe i have not got your meaning.........what means "my phone answer the call" ?
by the way i have not this problem.
hope you can solve yours!!!!!!
ciao

I use this which I think is simply put the best autolock for windows mobile. Customizable actions, my advice, keep it simple.
http://forum.xda-developers.com/showthread.php?t=386451&highlight=autolock

giangishanghai said:
maybe i have not got your meaning.........what means "my phone answer the call" ?
by the way i have not this problem.
hope you can solve yours!!!!!!
ciao
Click to expand...
Click to collapse
I mean if my phone is in my pants pocket and I got an incoming call and dont notice that. Then it often happend that I touch the phone or if I pull it out of the pocket I touch on the red button.

zmob123 said:
I use this which I think is simply put the best autolock for windows mobile. Customizable actions, my advice, keep it simple.
http://forum.xda-developers.com/showthread.php?t=386451&highlight=autolock
Click to expand...
Click to collapse
I know this but it doesn´t run without errors on Touch Diamond. See my post in this thread.

[APP] SensorLock
Hi Atze001,
try to have a look at Sensor lock, (Themes, Applications and Software , http://forum.xda-developers.com/showthread.php?t=422871).
maybe this app. can solve your problem.
ciao

I haven't noticed any battery problems when using S2U2 on my diamond. Every time I put my phone down, i invoke S2U2 (I have it mapped to the long press call button - never automatically, maybe this has something to do with it).
I can normally go about 3-4 days on a single charge while S2U2 is running when I'm not using it.
The version I'm using is 1.18, but I'm going to update it soon.

Locking / S2U2 / Stand by questions

Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?

Doesn't pressing the "End call" button for 2-3 seconds also lock the phone?
Regards!

I do understand what you're saying. I figured out something really basic just the other day, that is if your phone is locked or in sleep mode just pull out your stylus and it'll unlock and wake up.
Just 1 movement.
Sorry if this is really common knowledge and you already know this but sometimes we overlook the more basic functions on such a complex device!!
Cheers
DB

Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.

jon- said:
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
Click to expand...
Click to collapse
Yep i do this too.
Press the power button mate, and it will lock the phone
I like how the phone unlocks when you take the stylus out but i didnt like how it locks the phone when you put the stylus back in, so i removed that function using the options in gyrator

I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.

is there a registry option for disabling the unlock when the stylus is removed/falls out ????

matou25 said:
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
Click to expand...
Click to collapse
why my HD no "Phone Canvas"?

Jezwick said:
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
Click to expand...
Click to collapse
I searched a long time for this, but I didn´t find a solution

Standby locking
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.

surfaczer said:
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
Click to expand...
Click to collapse
Have you tried HDTweak?

ScarySquirrel said:
Have you tried HDTweak?
Click to expand...
Click to collapse
Please explain

device lock
gt112 said:
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Click to expand...
Click to collapse
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon

JPW said:
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
Click to expand...
Click to collapse
You're Irish too, I presume?
The other option is you attached a very small cab.

OOOPS forgot cab
have edited post now
Jon

Should the device lock when I put the stylus in? I get the impression from this thread that it should but mine doesn't?

How to disable screen on / wake up on styus out?

hey guys,
I have a problem. Often when i press (or in pants) the hd-case near the insert stylus, my hd wakes up and the screen glows.
Gyrator tells me, that the sylus-in-out-sensor gives (wrong) informations. The sensor says "stylus out" but the stylus is IN!
How can i disable the wakeup on stylus in/out (registry?)
thanks for your help guys!
nick

you must be pressing so much, i just tried to press mine and pull the stylus a little from the case, and my displays does not turn on.

cx2k5 said:
you must be pressing so much, i just tried to press mine and pull the stylus a little from the case, and my displays does not turn on.
Click to expand...
Click to collapse
Yes, it seems that is a bug of my device.
I am searching for the registry-key to disable the function
Please help me, guys!

Please, has anyone an idea?

nick007 said:
Please, has anyone an idea?
Click to expand...
Click to collapse
Hi Nick,
did you check the following registry key (e.g using PHM Registry editor):
HKCU\ControlPanel\Keybd\StylusOutStatus
0 means Stylus IN
1 means Stylus OUT
It is possible that the sensor has shifted from place. I know that others had this too with a Touch Diamond. Probably it is best to remove the back plate, remove the battery and look if you can find something wrong where the Stylus is inserted.
Looks like a hardware problem
Rick.

keypad lock

hi, i'm having trouble getting my touch hd to lock the keypad. i've searched the forum for similar threads but cant find too much. I've followed the advice of people in other threads.
I have tried a soft reset, and a hard reset. Gone to settings changed the End Button properties. But still cant get it to lock. In the End Button i have set it to show a quick menu. On this when i click the Lock Keypad, there is a couple second delay, then the screen flashes (as if it has done something) but the keypad is still not locked.
Anyone help me out??

windstate said:
hi, i'm having trouble getting my touch hd to lock the keypad. i've searched the forum for similar threads but cant find too much. I've followed the advice of people in other threads.
I have tried a soft reset, and a hard reset. Gone to settings changed the End Button properties. But still cant get it to lock. In the End Button i have set it to show a quick menu. On this when i click the Lock Keypad, there is a couple second delay, then the screen flashes (as if it has done something) but the keypad is still not locked.
Anyone help me out??
Click to expand...
Click to collapse
Not sure why your End button isn't working after you hold it down to lock.
However, you do have many other options for locking your device.
For example you can can use LockMeLite. Or use HD Tweak and set Autolock to enable so everytime your backlight goes off the device is automatically locked.
There is also various other options if you search a bit more

Seen this happen on Windows mobile phones before.
Do you happen to use a PIN code to unlock your phone?
If you do, this interferes with the screen lock facility.
Try disabling the PIN lock (Settings/Lock) and you will probably find it will then start to work.
Don't know of a way around this problem but someone else may..

Fallen Spartan said:
Not sure why your End button isn't working after you hold it down to lock.
However, you do have many other options for locking your device.
For example you can can use LockMeLite. Or use HD Tweak and set Autolock to enable so everytime your backlight goes off the device is automatically locked.
There is also various other options if you search a bit more
Click to expand...
Click to collapse
Thanks for the advice. I will look into other applications to use on the phone.

Farsquidge said:
Seen this happen on Windows mobile phones before.
Do you happen to use a PIN code to unlock your phone?
If you do, this interferes with the screen lock facility.
Try disabling the PIN lock (Settings/Lock) and you will probably find it will then start to work.
Don't know of a way around this problem but someone else may..
Click to expand...
Click to collapse
Thanks. I had a pin code thing on the phone. Took that off and the keypad lock now works! Excllent advice. You sorted out my problem. The keypad lock issue was annoying me so much that I was considering returning the phone. Now I'll be keeping it!

Alternative way to turn on / wake screen (capacitive buttons / accelerometer)

Hi guys,
Got my Desire HD last Friday and I'm really pleased with it, stunning device. The problem is, I'm using a case which protects the phone nicely and looks decent too but the power button is very tough to press in (let alone without a case TBH). I have Cyangens "Menu Unlock" enabled but I'm wondering if there is a tweak or APK to enable the capacitive buttons when the screen is off so I can turn it on easily (using Button Remapper). Maybe even a shake to enable app to wake the phone. Oh, cover below:
When I had the Galaxy S, I could just wake the screen with the main physical Home button.
When I had the Milestone, there was an APK to allow me to wake the screen with the buttons.
Any help or direction would really be appreciated. Would love to be able to unlock it that easily.
Cheers #auggie2k

Just a quick bump

auggie2k said:
Hi guys,
Got my Desire HD last Friday and I'm really pleased with it, stunning device. The problem is, I'm using a case which protects the phone nicely and looks decent too but the power button is very tough to press in (let alone without a case TBH). I have Cyangens "Menu Unlock" enabled but I'm wondering if there is a tweak or APK to enable the capacitive buttons when the screen is off so I can turn it on easily (using Button Remapper). Maybe even a shake to enable app to wake the phone. Oh, cover below:
When I had the Galaxy S, I could just wake the screen with the main physical Home button.
When I had the Milestone, there was an APK to allow me to wake the screen with the buttons.
Any help or direction would really be appreciated. Would love to be able to unlock it that easily.
Cheers #auggie2k
Click to expand...
Click to collapse
Buttons will be disabled when phone is asleep. The closest is to try "Tap Tap App" from the Market. Its free. Try and see how it could give you possibilities. Basically, it will allow you to set lock/wake permissions using the proximity sensor.
I use it as an alternative to pressing the power button all the time during shorter phone sleep/wake intervals

Much appreciated Jacob, cheers for the quick reply.

You can try WidgetLocker too, allow you to power up the phone using volume button.

auggie2k said:
Maybe even a shake to enable app to wake the phone.
Click to expand...
Click to collapse
now THAT is a cool idea
but, it would drain the battery...

panyan said:
now THAT is a cool idea
but, it would drain the battery...
Click to expand...
Click to collapse
Its possible without much battery drain I remember using Pocketshield with the HD2 where it unlocks when you flip the phone facedown and up or shake from side to side. Seems they're still hung up on Windows till now... I hope they come around to turn to Android soon

auggie2k said:
Much appreciated Jacob, cheers for the quick reply.
Click to expand...
Click to collapse
You're welcome mate! Test the proximity settings, I used to use "Easy Detection" but found it too sensitive, it unlocks with short finger waves which was cool but also gets screwed up with strong winds when outdoors... lol
Since, I've changed the setting to "safe mode (default)" and it responds well to 2 mild taps. Hope it works for you too!

bryant_16 said:
You can try WidgetLocker too, allow you to power up the phone using volume button.
Click to expand...
Click to collapse
only works if u're on stock kernel

try no lock, unlocks it with the volume buttons.

rossysaurus said:
try no lock, unlocks it with the volume buttons.
Click to expand...
Click to collapse
isnt this the same as widget locker, i.e. it works only on stock kernel

Just installed "Tap Tap App", works perfect for me as an alternative unlock/lock. Thanks a lot!
Jacob1369 said:
Buttons will be disabled when phone is asleep. The closest is to try "Tap Tap App" from the Market. Its free. Try and see how it could give you possibilities. Basically, it will allow you to set lock/wake permissions using the proximity sensor.
I use it as an alternative to pressing the power button all the time during shorter phone sleep/wake intervals
Click to expand...
Click to collapse

Jacob1369 said:
You're welcome mate! Test the proximity settings, I used to use "Easy Detection" but found it too sensitive, it unlocks with short finger waves which was cool but also gets screwed up with strong winds when outdoors... lol
Since, I've changed the setting to "safe mode (default)" and it responds well to 2 mild taps. Hope it works for you too!
Click to expand...
Click to collapse
Those settings work perfectly for me too, it makes the phone seem so much more "fancy" and has already spooked my poor iPhone owning friend, lots of WTF's Cheers for the suggestion.

auggie2k said:
Those settings work perfectly for me too, it makes the phone seem so much more "fancy" and has already spooked my poor iPhone owning friend, lots of WTF's Cheers for the suggestion.
Click to expand...
Click to collapse
lol... I was doing the exact same thing to my buddies with an iP4