ok it doesnt work on xperia!!! [email protected]
Thanks, will test it out on my X1 and report
tried on my X1..was working fine at first but after a softset the alignment go haywire...tried softset again but still same....had to use the dialpad to scholl to the built-in screen alignment to correct this....
any ideas??
wtf is the sense of this programm?????
skiping the screen calibration u have to do once?
installed it, it messed up my touch screen and that was it. didnt noticed anything else.
Yes pls dont use this program. It mess up my screen alignment. Thank god for hw button, I would have had to reflash my phone. Will you be working on one that work for the X1
Related
Hi guys,
as u know know the TF3D by default takes up the 1st panel.
and when i try to use the other panels..i can no longer press the button X... because whenever i do that..the entire Xperia screen goes blank and hangs up. then even the power button doesnt work and i have to remove and reinsert the battery.
what to do?
this TF3D causing major issues.. is it bugged?
Doing a soft reset is way easier...open the battery cover, pull out the pen und put it in the small hole...
Are you using TF3D as panel or on the default today panel? If not already tried, use the TF3D-Pnaleinstaller here ion the forum...
When i try to access the panels, my X1 hangs most of the time as well, using it as the today screen. Is there any fix?
ya i use it as on Today screen.
is there a fix around this?
i disabled it now anywya.
btw does Soft Reset also delete all the data?
"btw does Soft Reset also delete all the data?"
no thats the diff between soft and hard reset
which version r u guys using? I am using beta2 and I dont have any problem switching panels... only flaw I have in the tf3d is I cant add some people to the favorite list for some reason... otherwise everything is working as it should be
Same here
I wanna know if anyone found a fix for this? or at least let us know if you have this issue. This is what I have narrowed it out to.
I'm using <Touch-IT Xperience v2.1> ROM which has TF3D installed by default
The Panel interface(The screen which opens up when i click panel button) works perfect when i disable TF3D in today
Now when I activate it, am able to open the panel interface and choose any other panel.
After this, if i click on the panel button, the x1 just freezes and all i can do is soft reset
Note:- I have no other application running.
If this continues I have to choose either panels or TF3D. I love it when i can use TF3D for daily use and shift to Facebook or media panel when i need them.
I just wanna know of this indeed a bug or am i missing something big
currently 2 versions available
hi,
i too was suffering fromt he same issues and took a while to realize that the tf3d was causing it.
afaik, there are 2 different versions of tf3d (i mean by 2 diff. people) for xperia.
i beleive most of us are using the one titled 'Full manila hd cabs' (or something similar - extremely sorry for not recalling the name of the developer who's made rhe effort to provide it) - and the one experiencing the issue.
there is another version linkd on the xda wiki, will try it now - and update with names of both developers as well as results
again
actually installing TF3D as a panel solved this issue
but since we have the new manila... the panel doesnt work
so we are back to square one... by default the TF3D sit on the today's screen and after that pressing the panel button freezes the phone
And if you choose the new panel with TF3d... it says loading forever
SOmebody please help
I'm an idiot - I can't figure out where the "small hole" for the soft reset is located.
Can someone show me a picture?
I'm an idiot - I can't figure out where the "small hole" for the soft reset is located.
Can someone show me a picture?
Click to expand...
Click to collapse
hehe... I spent ages trying to figure this one out too...
here's an image I got on Google search..
to access the reset button .. you need to take off the battery cover, pull out your stylus (since that is obstructing the button) and then using the stylus 'poke' into the hole besides the battery.
I find this location - and the need to take off the battery cover - everytime you need to reset very VERY painful
Hey sorry if this is repost, havent seem to find an answer. I recently installed SPC Pocket plus 4, just to try it out. But now my screen rotates the opposite (wrong direction). When you open keyboard it rotates normal but when you use the designated button, or go into screen orientation settings its rotates the wrong way. How do I get to go back to normal??? Ive uninstalled, soft reset...Im trying to avoid a hard reset.
I also thought I'd install pocket plus 4 - it jacked my phone pretty bad. One of the things that went wrong was the screen rotation like you're talking about. I ended up flashing to the r2a at that point, and decided never to install it again.
Wish I had a fix/suggestion for you, sorry.
Was a while ago i used it. But i think you can change rotation from 90 degrees to 270 in the settings.
i have pocket plus installed in my phone too...
just use the advance config to change screen rotation to 270. Everything is fine again
Awesome, thanks guys, I will try that out.
mr_sheen said:
i have pocket plus installed in my phone too...
just use the advance config to change screen rotation to 270. Everything is fine again
Click to expand...
Click to collapse
Yea you have that option . This will fix it.
Hi I've installed bsb tweaks & cookie s home tab and both are working fine. After doing this I noticed when Im in a call my screen dont respond to any commands keypad, mute, end call, ect... Dont know if installing these apps is what brought this along or not. I've tried a soft reset but no luck and Im trying to avoid a hard reset(dont we all if anyone has any suggestions I would greatly appreciate it thanx....
DJ Lu said:
Hi I've installed bsb tweaks & cookie s home tab and both are working fine. After doing this I noticed when Im in a call my screen dont respond to any commands keypad, mute, end call, ect... Dont know if installing these apps is what brought this along or not. I've tried a soft reset but no luck and Im trying to avoid a hard reset(dont we all if anyone has any suggestions I would greatly appreciate it thanx....
Click to expand...
Click to collapse
just did the same thing, I had turned on the screen sensitivity one and the tap option right below it.
Change them back and you'll be ok. Not sure which of the 2 settings caused it, so you can try each and see which one is the culprit..
If you look it up on the forum elsewhere this problem has been mentioned before. You have to turn the tap time option off and your incall screen buttons will work.
da_prophit said:
If you look it up on the forum elsewhere this problem has been mentioned before. You have to turn the tap time option off and your dial screen buttons will work.
Click to expand...
Click to collapse
yep, that's why I was trolling/searching for my issue and found his thread, but I figured it out mostly on my own...thanks for the tip, now I know which one was the culprit...
what should i do if my screen display rotation wasn't working. When i rotate the phone over, everything display on screen wasn't moving. Please help
tuannguyen2992 said:
what should i do if my screen display rotation wasn't working. When i rotate the phone over, everything display on screen wasn't moving. Please help
Click to expand...
Click to collapse
Has it ever rotated the way you want? There's a couple of ways to make that happen, but the quickest is to just use the cab I have attached here. However, if you're running a custom ROM, you should check first to see if that ROM has the cabability built-in somehow (many do have that).
thanks my friend, that worked well
I've searched everywhere and haven't come across anyone with similar problems. When I boot up, everything is working fine, can see the big beautiful clock and use the touchflo slider at the bottom. After a few minutes, the screen just freezes at whatever screen it was on last. Touch interface doesn't work at all. Only when I click the start menu hard button and bring up the start menu does the touch screen work again. The thing is, I can't go back to the home screen again. I can only use the phone's functions from the start menu, which is very annoying. Also, when I launch an application, everything is fine, but when I exit it, the screen remains at whatever it was showing at the last view. Again, have to click to the start menu hard button to bring up any functionality and never see the home screen again.
Anyone know whats wrong?
Also: Using Miri v24, Radio 2.15.
I had a similar problem with Miri v24. I gave up in the end and installed Arthemis ROM instead. Works fine now.
Out of curiosity, are you using CHT?
Sounds like somethings causing Sense/Manila to crash.......
Try uninstalling CHT (if your using it)
Or hard reset.....
If you can still use the start menu then its not a "screen problem"....
it sounds like a software problem that should be sorted by a hard reset..
hope that helps
Phaedrus Nine said:
I had a similar problem with Miri v24. I gave up in the end and installed Arthemis ROM instead. Works fine now.
Out of curiosity, are you using CHT?
Click to expand...
Click to collapse
Nope. Fresh install of Miri with nothing added. I'll try Arthemis and see how it goes. Thanks!