Hey sorry if this is repost, havent seem to find an answer. I recently installed SPC Pocket plus 4, just to try it out. But now my screen rotates the opposite (wrong direction). When you open keyboard it rotates normal but when you use the designated button, or go into screen orientation settings its rotates the wrong way. How do I get to go back to normal??? Ive uninstalled, soft reset...Im trying to avoid a hard reset.
I also thought I'd install pocket plus 4 - it jacked my phone pretty bad. One of the things that went wrong was the screen rotation like you're talking about. I ended up flashing to the r2a at that point, and decided never to install it again.
Wish I had a fix/suggestion for you, sorry.
Was a while ago i used it. But i think you can change rotation from 90 degrees to 270 in the settings.
i have pocket plus installed in my phone too...
just use the advance config to change screen rotation to 270. Everything is fine again
Awesome, thanks guys, I will try that out.
mr_sheen said:
i have pocket plus installed in my phone too...
just use the advance config to change screen rotation to 270. Everything is fine again
Click to expand...
Click to collapse
Yea you have that option . This will fix it.
Related
i've installed this little app onto my phone and i very grateful i am too but the manual rotation function how do get it to work??
i've put a tick in the box and rebooted phone, but i dont see any options when using the phone to get the screen to rotate can some point me in the right direction??
thanks in advance
anyone 50 plus views and no one can offer even the smallest bit of help??
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
exseed said:
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
Click to expand...
Click to collapse
do not use GSEN
I have experienced a similar problem with SMS. I currently have Gyrator installed.
When i open a SMS and rotate the phone to landscape and try to use the keyboard, the app automatically closes and i'm stuck in the home screen.
I don't experience any other problems with other apps, just SMS & Email
This is really starting to annoy me.
I have checked WIKI which quotes
Simple enough, you could disable all rotation, then just use the "Windows Title" provided by Gyrator and select SMS and email tab (or others apps you wanted to rotate), add event and enable, then go rock with your Landscape full qwerty when typing SMS and emails.
Click to expand...
Click to collapse
Can someone explain this a little for me?
exseed said:
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
Click to expand...
Click to collapse
Hi,
I have exactly the same issue.
WWE HD device.
gyrator2
after reset everything back to normal....
I stopped using Gyrator because I also got infrequent problems which seemed to be caused by this.
I now use AEB Plus with double press on the OK button to rotate the screen. I personally find this the simple way to rotate as I don't often need the rotate.
I disabled all rotation in Gyrator.
Then I only enabled the rotation for sms/mms, mail, tomtom, and just a few others.
Set the polling rate to 2 seconds.
It works oke now, except for the incoming call problem.
Thanks for the infos, i tried reinstalling the gyrator, made a phone call and everything was normal.
exseed said:
Thanks for the infos, i tried reinstalling the gyrator, made a phone call and everything was normal.
Click to expand...
Click to collapse
Which version do you have installed for gyrator?
I have 2008.12.10.1
HI,
did some additional testing.
It seems not to occur after just one phone call.
I rebooted the device and everyhting was oke (with rotating).
I made a call
I recieved a call.
Still everything is oké.
Anyone else got something to add as a fact?
ikkezelf1 said:
Which version do you have installed for gyrator?
I have 2008.12.10.1
Click to expand...
Click to collapse
Mine is the same.
Exceed: You havn't found anything that could help us out here?
No, mate, it just happend after i reinstalled the app. I don't know how and why.
Don't know what I did, but havn't had the problem for almost a whole day now...
Will update when I know more details.
Solved;
It was the 'darklord' coloured icons top bar cab file that caused the rotate to loose its focus.
I removed it and it worked.
Pitty that I don't see the percentages of the battery live not anymore...
with regards.
For some reason even though it never used to do it, my touch hd has begun to rotate the screen automatically when it's in my pocket etc.
When I press the standby button to wake it up it's usually the wrong way up now, and it's annoying having to wait a few seconds to rotate the correct way round. It never used to do this, but it would still rotate things like opera and photos etc by turning the phone and that's great.
Why would it have begun behaving like this? I have got Gyrator installed but have never set anything up on it and it's been there for ages so I doubt it's that.
Cheers!
Have you upgraded with any og the Gyrator / G-Sensor cabs?
Regardless - search for "changescreen" on the Themes/Apps/S/ware forum and use that to set programs you do not wish to rotate.
Thanks mate.
No I haven't upgraded the gyrator cab or the G sensor one (I don't think anyway....).
As I say I haven't even used gyrator as I'm not certain how to set it up and decided I didn't really need to anyway.
Have installed changescreen (cheers for the tip) and set Manila in it to only have upright portrait mode. It seems to work but not quite fully.
For instance, if I have the phone on its side (landscape) and on standby, then wake it up, it comes on in landscape.
It does then change to portrait after a couple of seconds, even if it's on its side so the software does what it should do, but that delay while it kicks in is still pretty annoying to be honest.
Is that normal with this app?
Bottom line is that the phone didn't do this until recently so there must be something that has changed and can therefore be undone, but I don't know what.
Appreciate the help.
I was wondering if any one knows if Gyrator can be set to "not" rotate during a call? As it is now when I am talking ,and maybe need to click over to call waiting my screen goes to landscape...and then lags to go vertical so I can hit the right key.
The same when I want to hang up, when I pull away from my ear the screen is in landscape.
I would appreciate any help please........Thank you!:
Again, I am trying to stop rotation during a call. Also I am using a Sprint Touch Pro
Don't think it's possible with Gyrator? Use ChangeScreen + InCall Screen Tweak
Kraize, I appreciate that info, but could you walk me through that process you described? Is that an entry I would add as an event in Gyrator? Thanks again.....Marc
Eagleland,
This was driving me crazy as well but I figured out how to disable rotate in a call.
Create a new event in gyrator and set the application to phone. Then set orientation to portrait, and action to rotate screen. Finally, make sure that it is promoted above Rotate in the priority list.
I did this earlier today and so far it has been working for me.
*Also* - Make sure that Orientation is checked under that menu where edit event is located.
Correct me if I'm wrong but this can be done for any program you don't want to rotate.
Nox....thank tou so much for the info. I have not been able to test it yet, but I will let you know.
I am having no fun trying to figure Gyrator out! It would be nice if they had a manual or a better tutorial, don't you think?
Thanks again! Have a nice holiday!
yeah, i hit that problem too, but in gyrator options, there are some entries to disable it for some apps, like opera or touchflo. based on those, i did one for iconsoft phonex, because that's what i'm using. and it's working perfect, though i wouldn't have it any other way.
also, it's the exact same thing nox is talking about.
Hi Gordon and NOX! Wheel I want to say thanks again for the info. But I seem to still have the problem of the screen rotating while I am in the middle of a call? Nox, I followed your direction and maybe I did something not quite right.
First of all ,when I press the talk button and the phone keypad comes up, it will rotate. Then I placed a call, and as I pulled the phone away from my ear, it was again in landscape. Orientation is supposed to be checked all of the time correct? Is there something I may have missed?
Thanks again, Eagleland
Here's how I did it: http://forum.xda-developers.com/showpost.php?p=3406887&postcount=1170
Hi tnyynt....thanks for your help also. Weel, i tried it the way you described and that didnt' work also. Is maybe because I have to do a soft reset? Also should orientation be cheched in the event menu? I appreciate your insight.
Have a good evening...Eagleland
use the app "changescreen"...IMO it is much easier to use than gyrator..
go to the "exceptions" tab and add "cprog", select portrait and your done.
I also use smartlock to lock the phone during a call, along with the InCallScreenTweek and now there is no more opening applications during a call..
the screen rotation and opening of applications during a call drove me insane for awhile...
I am still having problems getting my phone to stop rotating during a call, and frustration is setting in. I am wondering if it is because I am using a Sprint HTC Pro. Does anyone know if the Changescreen App would work better than
Gyrator on a Pro. I installed the touch screen tweak and it wot
ks well but does not stop the screen rotation.
I am missing something , and can't seem to pin it down.
I would appreciate any insight once again.....I am offering to pay someone that can give me the answer....seriously!!
Thanks again, Eagleland
nox357 said:
Eagleland,
This was driving me crazy as well but I figured out how to disable rotate in a call.
Create a new event in gyrator and set the application to phone. Then set orientation to portrait, and action to rotate screen. Finally, make sure that it is promoted above Rotate in the priority list.
I did this earlier today and so far it has been working for me.
*Also* - Make sure that Orientation is checked under that menu where edit event is located.
Correct me if I'm wrong but this can be done for any program you don't want to rotate.
Click to expand...
Click to collapse
hi thanks all is working and it help me a lot - info 4 others read carefully and it is gonna work
thanks
Eagle,
I did what nox said and was still having issues like you. Then I went back into the event I created in gyrator to look through the settings and noticed my problem. When choosing the application ("phone") the first time, I only single clicked it and moved on. When I came back to edit, I noticed no app was selected, so this time I DOUBLE-CLICKED "phone" as the application and now it works perfect!!
Hope this helps. It's exactly what I (and presumably you) was looking for.
what should i do if my screen display rotation wasn't working. When i rotate the phone over, everything display on screen wasn't moving. Please help
tuannguyen2992 said:
what should i do if my screen display rotation wasn't working. When i rotate the phone over, everything display on screen wasn't moving. Please help
Click to expand...
Click to collapse
Has it ever rotated the way you want? There's a couple of ways to make that happen, but the quickest is to just use the cab I have attached here. However, if you're running a custom ROM, you should check first to see if that ROM has the cabability built-in somehow (many do have that).
thanks my friend, that worked well