Red LED when connect USB sync cable - MDA II, XDA II, 2060 General

When i connect my XDA II with my USB sync cable, the red LED turns on and restart.
I have tried another new cable, nothing change. i can still charge with my power supply. Please help! Thank You very much and sorry for my bad english.

Is that the battery problem?

Could be battery but I'm placing my bet on a connector problem that somehow has eroded and is shorting. I had a problem once with my xda that when I plug it in my car charger it actually discharges the battery. i thought the problem was with the charger but the connector problem finaly gave out and i had it replaced and it can charge again using the car charger.

how much did u spend?

About Philippine pesos 600 parts and labor.

Related

batt, chargers,....

hi,
is there is difference between charging at charger or usb? charging speed, battery life?
whats your aprox. batt life for one charging?
What about car charger (there is lots of story that is no good for batt?) its a same jack for mda compact, jasjar and phone motorola v3! can use theese chargers safely!?
tnx!
I have a motorola BT headset with usb style plug so that users can charge headset and phone (ie V3) at the same time, I have tried it with my "spare" o2 xda exec and can confirm that it does not charge dispite the charger being the same voltage as the exec charger - I still cant see why it wouldnt work, unless its something to do with reversed polarity.
I've got a similar problem, I have a Leadtek GPS with a mini USB plug, the output is also 5v and 1amp as per the XDA's charger YET the XDA won't charge.
I presume the XDA charger is sending some kinda of data signal in addition to Voltage that tells the HTC unit to switch onto Charging mode?
I've disected a USB cable trying to get this to work, so has anyone got any ideas as to how to make a Y cable capable of charging the XDA?
I had the same issue with my old Motorola BT headset and the "two-pronged" charger. When I plugged in the car charger and connected the Exec....nothing. Until I turned OFF the phone and left the phone connected to the charger. Hey Presto! Charging light.
Now though the BT headset packed in and I've had to buy a G2 from Bluetrek.
Cheers
Ant
Oh right! So you turned the Phone element off, or do you mean put the PDA on standby mode?
I'll play more with this later.
Pressed the power button.
Sorry, should have been more precise. With the phone connected, press the power button, wait a few seconds. You should see the green signal light flash a few times, then suddenly flash twice quite quickly. Finally, the charge light should appear.
Cheers
Ant
Dude, you're right!!!
I've just gone ahead, and made my Y cable by stripping two USB cables, joining, heat shrinking...
Plugged it in and IT WORKS!!
YIPPPEEE, that saved me a fortune!!

XDA Mini S + USB Charging

Not sure if this is right part of forum, but here it goes.
I am having an issue with the charging of my O2 XDA Mini.
If my battery dies, with still a small bit of power left in it (enough to get splash screen) and I go to charge it works fine no problem. Now over the wkend my phone died on my and I left it till this afternoon when I tried to turn on, it wouldnt turn on at all (not even splash) because obviously the battery is completely dead. Now when I go to plug it in, it wont charge, from USB cradle, the little orange light to say that its charging doesnt even come on.
Last time this happened I eventually got it to work via a friends socket (plug) charger, rather than USB, charger. Is there any reason for this or anyway that it can be fixed that even when the battery is completely dead I can charge it from my USB cradle.
Any help would be apreciated.
Thank you in advance
Rattlehead
Sorry to bump this, but does anyone have any idea. I beleve the cause of this is due to the fact the USB power from the PC isnt enough to get the charging process started, is there anyway to get this done via the cradle.
Thanks
Rattlehead
You'll need to use a charger that plugs into a wall socket I'm afraid. This happened to me once & that was the only way I could get it to work. If you search on Google, you'll find methods that involve a stripped down usb cable, but a wall charger is definately easier.
Good luck.
Should any usb based wall charger work?
I have a Motorolla one and Ive tried that but that didnt work.
I know for a fact that when I use my friends one it works and will charge, but he aint round for another 2 weeks
Poop
Rattlehead.ie said:
Should any usb based wall charger work?
I have a Motorolla one and Ive tried that but that didnt work.
I know for a fact that when I use my friends one it works and will charge, but he aint round for another 2 weeks
Poop
Click to expand...
Click to collapse
You cannot charge a totally flat battery through usb cable using PC,cuz it only supplies 0.5(500)amp,whereas to get the dead battery back into charging,it requires a supply charge of 1.0(1000)amp,secondly you can only charge the phone via usb if it's working normal and not when it's dead,as you cannot boot into OS.
Therefore,it'll only start to charge with a 'Wall Charger' which only supplies 1.0 amp,your friend's Wall (Mains) charger must be suppling a 1.0 amp charge.You cannot even charge it with the Motorola usb charger cuz it also supplies only 0.5 amp.So try to get a Wall (Mains) charger to get it start charging.
OR,
Yes! you can Jump start the battery using Motorola charger,but you'll have to sacrifice the motorola charger to do it,as you'll have to cut off the usb plug of the charger cable end and attach the 'Red' wire to the '+' (Possitive) connector of the battery and black wire to the '-' (Negative) connector of the battery and give Shock Charge to the battery for 10 seconds,repeat this for 4/5 times,it'll give the battery a jump start and will increase the 'Pulse' level of the battery,after that put it in the phone and check if it loads up,if it does then you can charge it via usb cable connected with PC.
Good luck
BTW ! there's an excellent thread regarding charging to avoide the battery to go flat and saving from getting into this situation,it wud be very info for you,check it also :-
http://forum.xda-developers.com/showthread.php?t=342162
Cheers
zabardast_1 ,
You are the Guru ~
sorry couldnt reply to you before now, zabardast_1 thank you so much.
Thats great will have a look tonight and see what I can do
Here is a simple way of solving the problem, go and buy a charger, they cost next to nothing.

HTC TyTN does not charge anymore.... Need Help

Hi Guys
I have a problem with my TyTN at the moment.
My device is not charging.
Yesterday i put it in my Docking Station and wait a little time.
But Now the Tynt isnt charged.
I think ist a Problem with my TyTN Hardware.
I have all Power Supplys used they i have, but it doesent work.
Can you help me?
Its this a problem with the accu or a fuse on the circuit ?
Sorry for my broken english i hope you understand me.
Regards Patrik Laube
Hello,
first of all, try to soft reset the device.
If it fails, hard reset it.
If it doesn't work, go the service center.
Good luck
The above advice is fine. But you did not say if any of the LEDs are lit.
Do you get the red NO CHARGE LED?
Does your phone operate normally except for not charging?
Mike
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
I had a similar problem, which was sorted by a new rom, but I ascertained it was software problem when I realised it charged when powered off.
PatrikLaube said:
Hello
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
I'm having an issue along these lines, also.
My phone has been working fine untill the other night when I tried to charge it via the wall electrical outlet. It will not charge at all, the battery has been drained to nothing and I can't turn it on. The yellowish light doesn't turn on when I plug it in like it used to.
I don't know if this is a battery issue or an issue with the USB connection inside of the phone. On a side note, when it did have power and I tried to connect it to the USB via the PC; it didn't work. The phone was on, but the computer didn't even notice the phone was plugged in. That leads me to believe it would be a connection issue; but I'm not quite sure.
If anyone has anything they can add to this I would appreciate it, thank you.
P.S. Bringing it to a service center is a bit out of the question in the mean time seeing as it was bought on eBay and funds are limited for the time-being.
MiZi666 said:
hi,
try this: when your device is connected via usb, tab on the battery icon in the taskbar on you device, go to the register "advanced" and check/uncheck "When Device is turned on, do not charge the battery when connected to the pc"
thats it
greetz
mizi
Click to expand...
Click to collapse
Hello, I cannot find the "When Device is turned on, do not charge the battery when connected to the pc" in my device. My Rom is WM6.1 CE OS 5.2.20273 cooked by dvha79_ddt.
My HTC TyTN has the sample problem, but i can use the USB to charge normally. It cannot work using my AC adapter Only when the device is open...
About your Battery Issue.
I'll tell you exactly why ur phone isnt charging anymore... If you have been charging it alot on the USB or pretty much any!! charging on the USB u have killed ur battery, never charge your phone on the USB it kinda sucks they should make these phones able to be Sync'd thru USB without a battery cause these batteries should not be powered thru the USB over Time... from syncing to your pc will kill these batteries i have noticed that when u sync this Tytn Ithru USB and the device is at say 70% it charges up to 100% pretty fast i would recommand to you and anyone who reads this dont sync your TYTN or any HTCC phone for to long to the USB Cause it will Trash your batteries Life down the road... Hope this was HELPFUL.
Cheers
Paul
PatrikLaube said:
Hello
My Phone is working fine but i cant charge it with the original HTC adapter.
I must load the accu with a special loader.
USB and Charge dont work....
And i have no warranty I cant send it to my operator.
When i plug in the USB Cable it doesent make everthing.
I think it was a to high voltage on the USB or the USB Ground ( - ) had a electrical Power for a litte moment.
Have you an idea?
Thanks for yur help.
Regards Patrik
Click to expand...
Click to collapse
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
does anyone has a solution to this ?
hi, did anyone solve this problem ? ive got the same problem with my htc touch cruise, i think it charges when turned off but doesnt when on. the orange light doesnt turn on when i plug usb to charge it and it doesnt sync thru the PC neither.
Does anyone has a solution to this ?Thanks a lot!
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
gypsygirl13 said:
^I'm having the same problem with my herm200. I did the soft reset, hard reset changed ROMs but still the same problem. I don't think it's the usb connector because if it is it wouldn't have been able to charge the phone even if it's turned off. Before I'm able to charge it turned on but it would take a few minutes before the orange led turns on, but when I use the phone or if I receive a text the orange led would turn off it's like the charger disconnects but after a few minutes it would go back again. Now it just wouldn't charge turned on, sometimes it gets worse where it just wouldn't charge on or off.
Now I'm already planning to buy an external battery charger.
Click to expand...
Click to collapse
Are you using an official 1000mA charger? (Not a 500mA one) 500mA ones work, but they are under-powered and can cause strange behaviour, like not charging whilst turned on or whilst on a call. Similar problems can be found with car-chargers that will not charge until the device is soft reset.
Mike
^no it's not the official charger, I have this usb wall charger called Power Juice (phone and mp3 charger).
Input Voltage: AC100-240V
Output Voltage: 5V
Output Current:1000mAh
Do you think it's because I'm not using the original charger?
fixed my charging problems
The boyfriend told me to try a new cable for my charger so he bought me a 5pin usb cable, tried it at home and it worked! I still need to turn off the screen sometimes but that's ok at least I don't have to turn off the phone anymore. Now my battery charges less than 3 hours.
Hold both SoftKeys and Then press the Power button
Or you can also hold both softkeys and then put your stylus into the reset hole.
answer why it does not charge through the usb
Sorry for the very very late response. Under electrical legislation all hand held electrical devices must be insulated and fused. Some of the chargers that you can purchase are sealed without fuse which indicates that the phone has a fuse contained within its circuitry (or there may be 2 fuses one in each device) .
The problem you have encountered is that you have connected your phone to a computer or mains supply to charge. There has been a surge in the electrical supply either on connection or by un-connecting from these supplies (e.g. connect to the computer as it is booting would see a 65w signal through the USB) and this more often than not blows the fuse which sits on the PCB (printed circuit board) just after the usb connection internally to the phone.
you can either have the fuse fixed for 20/25 gbp or you can purchase a new circuit board or you can use an external charger for the battery. As it is only the power input point that is faulty.
hope this helps
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
cyberdroxxx said:
Since we are at this non-charging & battery issue, I would like to ask this question on the D838pro. My battery won't charge even after 24 hours of charging. The red LED blinks thru the whole process. The LED did not turn on to orange or green. It is the battery problem because my spare battery works well. I would like to know what is wrong with the battery as I am willing to strip down the battery. Could it be the battery circuit or wiring that had fired?
Click to expand...
Click to collapse
Never tried stripping down a battery, some things... well, just don't seem worth it. However as a learning exercise it might be interesting. Without lots of testing on a good battery with a multimeter then I have no clue what the readings should be between all the contacts. (Now there's a little job for you) It is as likely the internal structure of the battery is screwed as it is to be a wiring problem.
If you solve it you can certainly report back here
Mike

Hd Battery Charging between 60 to 70 %

Hi everyone,
I've a brand new touch Hd (november 2008). Few days ago I report a problem charging the battery with the stock charger. The charge doesn't stop (always amber light and no green light of completed charge) the battery percentage stuck between 60 to 70 %. Only with the stock adapter. If I charge battery with another adapter (example with an original Apple usb ipod charger, with same specs) or with usb cable connected on pc the charging stop correctly. Another fact if I connect stock charger to the phone when it was at 100% battery charge, it dosn't start charging and no amber/green light appear.
Any clues?
Thanks a lot a excuse my poor english
Duff charger?
billu said:
Duff charger?
Click to expand...
Click to collapse
I think no because it charges the battery for the 60 % in my hd, and if I connect another device (an mp3 player or another phone) to the charger it charges correctly.
soft rest the device and try again
jalv3000 said:
soft rest the device and try again
Click to expand...
Click to collapse
I've already done soft resets and hard reset! no solution. The rom and hspl are the stocks.
gnammyx said:
Hi everyone,
I've a brand new touch Hd (november 2008). Few days ago I report a problem charging the battery with the stock charger. The charge doesn't stop (always amber light and no green light of completed charge) the battery percentage stuck between 60 to 70 %. Only with the stock adapter. If I charge battery with another adapter (example with an original Apple usb ipod charger, with same specs) or with usb cable connected on pc the charging stop correctly. Another fact if I connect stock charger to the phone when it was at 100% battery charge, it dosn't start charging and no amber/green light appear.
Any clues?
Thanks a lot a excuse my poor english
Click to expand...
Click to collapse
I wasn't impressed at all with my charger
after a while the usb socket didn't hold the cable tight so I had to wiggle the cable till it kicked in and started charging
changed to a usb socket-ed charger with the supplied cable
and now all's fine
Sounds very much like a bad charger.
I had this on a Tytn with the supplied charger. I had bought two extra ones for the office and the study and both of these were fine. It was too expensive to send the charger back for repair so I just stuffed it in the cupboard and used a USB charger.
Ok, thanks so much for replies. Now I'm thinking to sell my hd without the original charger.
Bye

[Q]Defy Charging Problem

Hi I've got a problem with my phone. If I connect it to the PC using orginal USB cable it charging, transfering data and so. But if I connect the phone to the wall charger it don't charge only screen wake up but no charging on battery icon. The wall charger is orginal too. I've tried changing ROMs.
This problem is really anoying so if You can, please help me.
You write you use the original charger, but do you also use the original USB cable? It matters, cheap USB cables do not work on the Defy :-(
seems some problem in wall socket adaptor
bartve said:
You write you use the original charger, but do you also use the original USB cable? It matters, cheap USB cables do not work on the Defy :-(
Click to expand...
Click to collapse
Got to check that out, cause I've been wondering why I can charge my Defy+ in some wall chargers, some computers, and so far no car chargers. Would be great if the cables are the cause. Thanks
I use the orginal usb cable too
Madern said:
Hi I've got a problem with my phone. If I connect it to the PC using orginal USB cable it charging, transfering data and so. But if I connect the phone to the wall charger it don't charge only screen wake up but no charging on battery icon. The wall charger is orginal too. I've tried changing ROMs.
This problem is really anoying so if You can, please help me.
Click to expand...
Click to collapse
There's nothing wrong with your phone, ROM, or USB cable, but your wall charger is broken.
Just get your charger replaced. That's what warranties are for.
The Defy doesn't really care about USB cables. If it's switched off it will charge anyway, so the ROM doesn't matter either. But it's very picky about the current and voltage stability of the charger. That's why many 3rd party chargers don't work no matter what cable you plug into it.
I was in non-official phones service and they check charging on another adaptors but i think they were not original. Anyway as i remember when lastly phone was charging it was a storm and on the next day it wasn't working but i'm not sure.
I know this thread is old but i didn't find solution to this problem, soooo:
The answer is = turn off debugging over USB
Krokogator said:
I know this thread is old but i didn't find solution to this problem, soooo:
The answer is = turn off debugging over USB
Click to expand...
Click to collapse
What's debugging got to do with wall charger??
Doesn't matter from where I send it, what matters is written above
So why when I turn it on i have problems with charging?
Bug?
if u use External charger u must charge ur phone with mcgyver for 10 min.
after that use the External charger.
becaz ur battery so low.
Charging Issue
I got the same problem from the day i bought the mobile... The service center people told its charger issue and need to replace the charger. So Changed the wall charger under warranty. It took around 2 months to get my charger back. But the things are same. It sometime charge. Sometimes the screen will on and didnt charge. I tried changing different Versions. Same thing. Even the service center people have no idea about it....
Could you check if the micro-usb connector of the phone or that of the cable is clean, dirt and dust reduces or prevents transfer rate of electricity.

Categories

Resources