Hi,
Since I use Linux on all my primary workstations, I wanted to use WM5orage to export my sdcard in the trinity as an external disk. The program starts fine and the computer also recognizes it. There does however seem to be a problem because the computer starts complaining about I/O error and never succeeds in accessing the drive.
for the interested, this is what my log shows:
Dec 23 17:34:49 laptopia kernel: scsi6 : SCSI emulation for USB Mass Storage devices
Dec 23 17:34:54 laptopia kernel: Vendor: WM5torag Model: TRIN100 Rev: 1.60
Dec 23 17:34:54 laptopia kernel: Type: Direct-Access ANSI SCSI revision: 00
Dec 23 17:34:54 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:34:54 laptopia kernel: SCSI device sdb: 3970048 512-byte hdwr sectors (2033 MB)
Dec 23 17:34:55 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:34:55 laptopia last message repeated 5 times
Dec 23 17:34:55 laptopia kernel: sdb: Write Protect is off
Dec 23 17:34:55 laptopia kernel: sdb: assuming drive cache: write through
Dec 23 17:34:55 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:34:56 laptopia kernel: SCSI device sdb: 3970048 512-byte hdwr sectors (2033 MB)
Dec 23 17:34:56 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:34:56 laptopia last message repeated 5 times
Dec 23 17:34:57 laptopia kernel: sdb: Write Protect is off
Dec 23 17:34:57 laptopia kernel: sdb: assuming drive cache: write through
Dec 23 17:34:57 laptopia kernel: sdb: sdb1
Dec 23 17:34:57 laptopia kernel: sd 6:0:0:0: Attached scsi disk sdb
Dec 23 17:34:57 laptopia kernel: sd 6:0:0:0: Attached scsi generic sg0 type 0
Dec 23 17:34:57 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:34:59 laptopia last message repeated 12 times
Dec 23 17:34:59 laptopia kernel: sd 6:0:0:0: SCSI error: return code = 0x70000
Dec 23 17:34:59 laptopia kernel: end_request: I/O error, dev sdb, sector 8
Dec 23 17:34:59 laptopia kernel: printk: 5 messages suppressed.
Dec 23 17:34:59 laptopia kernel: Buffer I/O error on device sdb, logical block 1
Dec 23 17:34:59 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:35:00 laptopia last message repeated 5 times
Dec 23 17:35:00 laptopia kernel: sd 6:0:0:0: SCSI error: return code = 0x70000
Dec 23 17:35:00 laptopia kernel: end_request: I/O error, dev sdb, sector 16
Dec 23 17:35:00 laptopia kernel: Buffer I/O error on device sdb, logical block 2
Dec 23 17:35:00 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:35:01 laptopia last message repeated 6 times
Dec 23 17:35:01 laptopia kernel: sd 6:0:0:0: SCSI error: return code = 0x70000
Dec 23 17:35:01 laptopia kernel: end_request: I/O error, dev sdb, sector 40
Dec 23 17:35:01 laptopia kernel: Buffer I/O error on device sdb, logical block 5
Dec 23 17:35:01 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:35:02 laptopia last message repeated 5 times
Dec 23 17:35:02 laptopia kernel: sd 6:0:0:0: SCSI error: return code = 0x70000
Dec 23 17:35:02 laptopia kernel: end_request: I/O error, dev sdb, sector 48
Dec 23 17:35:02 laptopia kernel: usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 23 17:35:03 laptopia last message repeated 5 times
etc..etc..etc...
anyone that has gotten this to work correctly ?
found solution
Just to reply to my own post, but I found the solution.
I just had to turn off the advanced USB network functionality off in the usb to pc connection settings. now it works perfectly
In Hermes you need to do this before using WM5Torage:
Settings --> Connections --> USB to PC and disable "advanced USB functions"
Try to see if it's the same on Trinity.
lol
posted at the same time!
pof said:
In Hermes you need to do this before using WM5Torage:
Settings --> Connections --> USB to PC and disable "advanced USB functions"
Try to see if it's the same on Trinity.
Click to expand...
Click to collapse
Nice Trick! It works!
BTW I had to change some settings in Pocket Controller (It made the sugestions itself) but everything is working now.
Gracias Pof.
Something is not right. I click Settings --> Connections --> USB to PC but then the screen flashes once but nothing happens. Any ideas?
Never mind... got it. WisBar Advance was interfering with it and as soon as I shut WisBar down then I could get into the setting.
sorry I'm a bit slow,
On my i-Mate Jam, i used the Card Export (which allows you to let your pc see your ppc as a usb-stick)
But can i do this with the trinity without Card Export?
(cuz it doesn't matter if i enable of disable the setting above it still starts up Active Sync)
Azamat said:
sorry I'm a bit slow,
On my i-Mate Jam, i used the Card Export (which allows you to let your pc see your ppc as a usb-stick)
But can i do this with the trinity without Card Export?
(cuz it doesn't matter if i enable of disable the setting above it still starts up Active Sync)
Click to expand...
Click to collapse
Yes, WM5Storage will work on the trinity if you follow the steps above. I was having problem until I did the same. Now it works flawlessly and best of all WM5Storage is free!
card export works too with this trick.
Card export II
hmm I'm having a problem with card export and wm5storage.
Changing the advanced USB functions doesnt help. With wm5storage I was getting an f1 error..sorry cant remember the exact error message.
Card export II ver 2.20 wasnt working either
Just now I tried the latest release of Card export ver 3.00 and im getting error cant connect to driver interface.
You guys actually got either wm5storage or Card Export to work on ya trinity's? cause im having no end of trouble with it and really miss the feature since upgrading from my Magician, because we can't install active sync on my University computers.
Device
Dopod D810
ROM 1.23.707.6 DOPODASIA WWE GPS
Radio 1.35.00.11
OS 5.1.461
CPU Samsung SC32442A-400MHz
Thanks guys! got my trinity this week and I was very disappointed when WM5torage wouldn't work, its one of my most used programs!
thanks perfectly working fine!
i thought schaps rom with wm5torage is useless!
up for you bro!
wm5torage for my p3600i (and previously p3600) doesn't work
pof said:
In Hermes you need to do this before using WM5Torage:
Settings --> Connections --> USB to PC and disable "advanced USB functions"
Try to see if it's the same on Trinity.
Click to expand...
Click to collapse
Hello,
my p3600i (and previously had a p3600) doesn't work using wm5torage. I'm running tnyynt's wm6.1 rom, when i go to "Settings --> Connections --> USB to PC", i see "Enable advanced network functionality". is this the same thing you guys are referring to? i unchecked this but no luck.
wm5torage version i'm trying to use is 1.8, i also tried 1.7 before but that doesn't work either. my laptop just don't see my card. I used a 8gb microsd with a mini-sd adaptor and also a 4 gb mini-sd, both didn't work.
hopefully someone can help me out.
thanks!
I am running WM6 on my 8525 but had the problem with WM5 too
32 bit Vista workstation running latest WMDC.
everytime I lift my 8525 out of the charging/sync cradle, I get the following error: "Windows Mobile Device Center Sync Host has stopped working."
Any ideas how to fix issue?
Problem signature:
Description:
Stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: WmdHost.exe
Application Version: 6.1.6965.0
Application Timestamp: 465eef4e
Fault Module Name: unknown
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 53502105
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1033
I have a htc p3300, i made upgrade whit Artemis_USPL, now i don´t have hifi...
My device info:
Wizard Service Tool v4.2.2
27/05/09 03:49:21
CPU Manuf. FAILED
=> Bootloaders:
IPL: 3.13.0001 (G4 device)
SPL: 3.13 (G3 device)
SPL date unknown
=> Firmware:
OS: Unknown
ROM: Unknown
Registry AKU: .1.6.0
Radio values FAILED
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ae9c4b4a - 511.50k (0x7fe00)
4ea75eda - 47.20M (0x2f34000)
0fb1cde2 - 56.06M (0x3810000)
8fb1cc12 - 3.06M (0x310000)
efb1cbbe - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000521b0108330101a11f070611
Key Index: 30
All Done.
please can you help me to put my animal online again!!!
thank´s...
all solve here :
1st
need: MTTY
steps
1: Bootloader
2: mtty
3: task 28 55aa (fully format device)
4: rtask 0 (reset radio)
5: Reflash device
Above from wiki XDA dev's
Important, do not try to start device after above, after radio reset, put device back to bootloader directly
If above does not help you need to reflow or reball radio chip (tested and working if above does not work)
And my result from MTTY:
task 32
USB>password BOOTLOADER
HTCSPass.< YHTCEUSB>info 8
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x3340000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>info 7
HTC Integrated Re-Flash Utility for bootloader Version:1.50a SABLE EVT version:G.39
MainBoardID = C
Built at: Jun 12 2006 13:46:04
Copyright (c) 1998-2005 High Tech Computer Corporation
Turbo Mode Frequency = 312 MHz
Run Mode Frequency = 208 MHz
Memory Frequency = 208 MHz
SDRAM Frequency = 104 MHz
USB>info 4
HTCS Lњ3ЖHTCE
USB>task 28
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x3340000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>task 28 55aa
Wait..
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x33C0000
All Size: 0x74C0000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>set 14 0
HTCST ЪИТHTCEUSB>set 14 10
HTCSF kEШ(HTCEUSB>set 14 9
HTCSF kEШ(HTCEUSB>
DONT PANYC after NO BOOT-> REFLASH CEOS.nbf (HW6915 ROM FOR G4-121UK) FROM HP Utility.
Info for Pass1:
HTCSPass1.CM€ЛHTCEUSB>password 0000000000000000
source:
http://forum.xda-developers.com/showthread.php?t=471942
final steps
If your Flash chip type is G4, you can use ENG V1.21UK rom to update, I have uploaded the rom to Yahoo.com mail box.
I have changed my 6965 CHT ver to ENG ver successfully.
You can login yahoo mail box by using [email protected] as id and 69656965 as password.
Pls note not to delete the rom as others might need it too.
Flsah method:
1. Sync your mobil with PC by ActiveSync4.5 or up
2. Double click the downloaded update rom programme.
3. Click upgrade button and wait for 8-10 minutes
4. Done.
source
http://forum.xda-developers.com/showthread.php?t=420041
please, don't chage anything. keep data safe for other people
has anyone tried the above instructions and succeeded ? I have a perfectly working 6915, but it's in Spanish and I would like to change the language to English. I'm afraid of bricking the phone or end up with the "No GSM" problem.
DO NOT USE that way.Surely, your phone will become a brick. That will change Product ID with invalid code and you will never restore SW for radio ROM .
[email protected] ~/Desktop> inxi -v3
System: Host: thor Kernel: 5.15.3.21.realtime1-1-rt x86_64 bits: 64 compiler: gcc v: 11.1.0 Desktop: Xfce 4.16.0
Distro: Arch Linux
Machine: Type: Desktop Mobo: ASUSTeK model: STRIX Z270G GAMING v: Rev 1.xx serial: <superuser required>
UEFI-[Legacy]: American Megatrends v: 1501 date: 07/13/2021
CPU: Info: Quad Core model: Intel Core i7-6700K bits: 64 type: MT MCP arch: Skylake-S rev: 3 cache: L2: 1024 KiB
flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 63999
Speed: 855 MHz min/max: 800/4300 MHz Core speeds (MHz): 1: 810 2: 2277 3: 2529 4: 1238 5: 1221 6: 1162 7: 1104
8: 984
Graphics: Device-1: NVIDIA GM204 [GeForce GTX 980] vendor: ASUSTeK driver: nvidia v: 495.44 bus-ID: 01:00.0
Device-2: Logitech Webcam C270 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 1-10:6
Display: x11 server: X.Org 1.21.1.1 driver: loaded: nvidia unloaded: fbdev,modesetting,vesa
resolution: 3840x2160~60Hz
Message: Unable to show advanced data. Required tool glxinfo missing.
Network: Device-1: Intel Ethernet I219-V vendor: ASUSTeK driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
IF: enp0s31f6 state: up speed: 1000 Mbps duplex: full mac: 2c:4d:54:d3:b9:af
Device-2: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter vendor: ASUSTeK driver: ath10k_pci v: kernel
bus-ID: 04:00.0
IF: wlan0 state: down mac: 86:05:63:44:d4:e8
Drives: Local Storage: total: 2.05 TiB used: 277.52 GiB (13.2%)
Info: Processes: 312 Uptime: 5h 36m Memory: 15.44 GiB used: 4.92 GiB (31.9%) Init: systemd Compilers: gcc: 11.1.0
clang: 13.0.0 Packages: 1463 Shell: fish v: 3.3.1 inxi: 3.3.09
I don't understand well