Hello, I have Installed the AvinUSA Android v7.1 multimedia Navigation system . Connected last week the AvinUSA forward facing camera (DVR6035) directly to the USB port of the Navigation system. The camera gets power (red light comes on), I get a USB icon on the upper left corner of the screen, and I even got it to record video/audio (red light starts blinking) to the MircoSD card that I inserted into the side of the camera.
However, when I select DVR from the menu, the HD DVR Driver software opens up, but I immediately, get a red circle with a line through it in the upper right corner. Also on the HD DVR screen, the only buttons that are active are the home button (in the upper left), the About and Exit buttons in the lower right. All other buttons are grayed out.
I have tried connecting the front dash camera to the other USB port with the same results. Take all USB SD drive out, I also tried using the HD DVR software that came with the camera and I downloaded the newer version without success. The "DVR" setting is set to "USB DVR".
USB is in mode debug
Do someone have a solution ?
AIDA64 for Android v1.62 Report
<<< System >>>
Manufacturer: rockchip
Model: px3
Brand: Android
Board: rk30sdk
Device: px3
Hardware: rk30board
Platform: rk3188
Product: px3
Serial: SNIFRC2XN0
Total Memory: 2048 MB
Available Memory: 733 MB
Internal Storage Total Space: 26.88 GB
Internal Storage Free Space: 10.84 GB
External Storage #1 Total Space: 28.77 GB
External Storage #1 Free Space: 27.14 GB
External Storage #2 Total Space: 1021 MB
External Storage #2 Free Space: 1021 MB
Bluetooth Version: 4+
Device Features: android.hardware.audio.low_latency
android.hardware.audio.output
android.hardware.bluetooth
android.hardware.bluetooth_le
android.hardware.camera
android.hardware.camera.any
android.hardware.camera.autofocus
android.hardware.camera.flash
android.hardware.camera.front
android.hardware.ethernet
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.distinct
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.accessory
android.hardware.usb.host
android.hardware.wifi
android.hardware.wifi.direct
android.software.app_widgets
android.software.backup
android.software.device_admin
android.software.home_screen
android.software.input_methods
android.software.live_wallpaper
android.software.managed_users
android.software.print
android.software.voice_recognizers
android.software.webview
com.google.android.feature.GOOGLE_BUILD
com.google.android.feature.GOOGLE_EXPERIENCE
<<< CPU >>>
Core Architecture: 4x ARM Cortex-A9 @ 1416 MHz
Instruction Set: 32-bit ARMv7
CPU Revision: r3p0
CPU Cores: 4
CPU Clock Range: 312 - 1416 MHz
Core 1 Clock: 1008 MHz
Core 2 Clock: 1008 MHz
Core 3 Clock: 1008 MHz
Core 4 Clock: 1008 MHz
CPU Utilization: 71 %
Scaling Governor: interactive
Supported ABIs: armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
AES: Not Supported
NEON: Supported
SHA1: Not Supported
SHA2: Not Supported
<<< Display >>>
Screen Resolution: 1280 × 480
xdpi / ydpi: 283 / 66 dpi
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Refresh Rate: 70 Hz
Default Orientation: Landscape
OpenGL ES Version: 3.1
GPU Version: OpenGL ES 2.0
OpenGL ES Extensions: GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_vertex_array_object
GL_OES_compressed_ETC1_RGB8_texture
GL_EXT_compressed_ETC1_RGB8_sub_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_OES_vertex_half_float
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
GL_OES_depth_texture_cube_map
GL_KHR_debug
GL_ARM_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_OES_mapbuffer
<<< Network >>>
<< Telephony >>
Phone Type: None
<< Wi-Fi >>
State: Enabled
SSID: "Netgear 800S"
BSSID: 10:da:43:5e:34:5a
Hidden SSID: No
IPv4 Address: 192.168.1.62
IPv6 Address: fe80::a22c:59ff:fe58:2d0a
Signal Strength: -45 dBm (Excellent)
Link Speed: 72 Mbps
Frequency: 2412 MHz
Network ID: 2
Gateway: 192.168.1.1
Netmask: 255.255.255.0
DNS1: 192.168.1.1
DHCP Lease Duration: 12 hours
5 GHz Band: Not Supported
Wi-Fi Aware: Not Supported
Wi-Fi Direct: Supported
<<< Battery >>>
Power Source: A/C Charger
Level: 50 %
Status: Discharging
Health: Good
Technology: Li-ion
Capacity (Reported by Android): 6700 mAh
<<< Android >>>
Android Version: 7.1.1 (Nougat)
API Level: 25
Android Security Patch Level: 2017-02-05
Rooted Device: Yes
Android ID: d8c380de3819cc80
Bootloader: fastboot
Build ID: px3-userdebug 7.1.1 NMF26X eng.work2.20181124.154049 test-keys
Codename: REL
Fingerprint: Android/px3/px3:7.1.1/NMF26X/work211241540:userdebug/test-keys
ID: NMF26X
Incremental: eng.work2.20181124.154049
Java Runtime Version: Android Runtime 0.9
Java VM Version: ART 2.1.0
Java VM Heap Size: 192 MB
Kernel Architecture: armv7l
Kernel Version: 3.0.101+ ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #503 SMP PREEMPT Mon Sep 3 14:49:00 CST 2018
Tags: test-keys
Type: userdebug
Google Play Services Version: 17.4.55 (040300-248795830)
OpenSSL Version: BoringSSL
ZLib Version: 1.2.8
ICU CLDR Version: 28.0
ICU Library Version: 56.1
ICU Unicode Version: 8.0
Android Language: English (United States)
Configured Time Zone: Central European Summer Time (UTC+02:00)
UpTime: 00:05:32
<<< Devices >>>
<< USB Device - Linux 3.0.101+ dwc_otg_hcd DWC OTG Controller >>
Manufacturer: Linux 3.0.101+ dwc_otg_hcd
Product: DWC OTG Controller
Serial: usb20_otg
Device ID: 1D6B-0002
Device Class: 09 / 00 (Full-Speed Hub)
Device Protocol: 00
Revision: 0300
Supported USB Version: 2.00
Current Speed: 480 Mbps
<< USB Device - Linux 3.0.101+ host20_hcd DWC OTG Controller >>
Manufacturer: Linux 3.0.101+ host20_hcd
Product: DWC OTG Controller
Serial: usb20_host
Device ID: 1D6B-0002
Device Class: 09 / 00 (Full-Speed Hub)
Device Protocol: 00
Revision: 0300
Supported USB Version: 2.00
Current Speed: 480 Mbps
<< USB Device - Generic USB Mass Storage Device GENERALPLUS-MSDC >>
Manufacturer: Generic USB Mass Storage Device
Product: GENERALPLUS-MSDC
Device ID: 3322-6655
Device Class: 00 / 00
Device Protocol: 00
Revision: 0100
Supported USB Version: 2.00
Current Speed: 480 Mbps
Maximum Power: 100 mA
No cameras found.
No OpenCL devices found.
No CUDA devices found.
No Vulkan devices found.
No PCI devices found.
<<< Thermal >>>
No thermal sensors found.
<<< Sensors >>>
No sensors found.
<<< Apps >>>
AIDA64: com.finalwire.aida64(v1.62)
Booking.com: com.booking(v17.9)
CronusViewer: com.test.androidsettingui(v0.93.00)
Gmail: com.google.android.gm(v2019.05.26.252424914.release)
HD DVR: com.ankai.cardvr(v3.0.41)
iGO Navigation: com.nng.igo.primong.igoworld(v9.18.27.693527)
Sygic: com.sygic.aura(v18.0.10)
Waze: com.waze(v4.52.0.3)
<<< Codecs >>>
OMX.google.mp3.decoder: audio/mpeg
OMX.google.amrnb.decoder: audio/3gpp
OMX.google.amrwb.decoder: audio/amr-wb
OMX.google.aac.decoder: audio/mp4a-latm
OMX.google.g711.alaw.decoder: audio/g711-alaw
OMX.google.g711.mlaw.decoder: audio/g711-mlaw
OMX.google.vorbis.decoder: audio/vorbis
OMX.google.opus.decoder: audio/opus
OMX.google.raw.decoder: audio/raw
OMX.google.aac.encoder: audio/mp4a-latm
OMX.google.amrnb.encoder: audio/3gpp
OMX.google.amrwb.encoder: audio/amr-wb
OMX.google.flac.encoder: audio/flac
OMX.rk.video_decoder.avc: video/avc
OMX.rk.video_decoder.m2v: video/mpeg2
OMX.rk.video_decoder.vp8: video/x-vnd.on2.vp8
OMX.rk.video_decoder.h263: video/3gpp
OMX.rk.video_decoder.m4v: video/mp4v-es
OMX.rk.video_decoder.hevc: video/hevc
OMX.rk.video_encoder.avc: video/avc
OMX.google.h264.decoder: video/avc
OMX.google.vp8.decoder: video/x-vnd.on2.vp8
OMX.google.vp9.decoder: video/x-vnd.on2.vp9
OMX.google.h263.encoder: video/3gpp
OMX.google.h264.encoder: video/avc
OMX.google.mpeg4.encoder: video/mp4v-es
OMX.google.vp8.encoder: video/x-vnd.on2.vp8
<<< Directories >>>
Data: /data
Root: /system
Java Home: /system
Download/Cache Content: /data/cache
<< External Storage >>
Primary External Storage: /storage/emulated/0
External Files #1: /storage/emulated/0/Android/data/com.finalwire.aida64/files
External Files #2: /storage/external_sd/Android/data/com.finalwire.aida64/files
External Files #3: /storage/usb_storage/Android/data/com.finalwire.aida64/files
Alarms: /storage/emulated/0/Alarms
DCIM: /storage/emulated/0/DCIM
Downloads: /storage/emulated/0/Download
Movies: /storage/emulated/0/Movies
Music: /storage/emulated/0/Music
Notifications: /storage/emulated/0/Notifications
Pictures: /storage/emulated/0/Pictures
Podcasts: /storage/emulated/0/Podcasts
Ringtones: /storage/emulated/0/Ringtones
<< Mount Points >>
/: Device: rootfs
File System: rootfs
Read-Only
/dev: Device: tmpfs
File System: tmpfs
Read-Write
/dev/pts: Device: devpts
File System: devpts
Read-Write
/dev/memcg: Device: none
File System: cgroup
Read-Write
/dev/cpuctl: Device: none
File System: cgroup
Read-Write
/proc: Device: proc
File System: proc
Read-Write
/sys: Device: sysfs
File System: sysfs
Read-Write
/sys/kernel/debug: Device: /sys/kernel/debug
File System: debugfs
Read-Write
/acct: Device: none
File System: cgroup
Read-Write
/mnt: Device: tmpfs
File System: tmpfs
Read-Write
/mnt/runtime/default/emulated: Device: /dev/fuse
File System: fuse
Read-Write
/mnt/runtime/read/emulated: Device: /dev/fuse
File System: fuse
Read-Write
/mnt/runtime/write/emulated: Device: /dev/fuse
File System: fuse
Read-Write
/mnt/media_rw/external_sd: Device: /dev/block/vold/public:179,33
File System: vfat
Read-Write
/mnt/runtime/default/external_sd: Device: /dev/fuse
File System: fuse
Read-Write
/mnt/runtime/read/external_sd: Device: /dev/fuse
File System: fuse
Read-Write
/mnt/runtime/write/external_sd: Device: /dev/fuse
File System: fuse
Read-Write
/mnt/media_rw/usb_storage: Device: /dev/block/vold/public:8,1
File System: vfat
Read-Write
/mnt/runtime/default/usb_storage: Device: /dev/fuse
File System: fuse
Read-Write
/mnt/runtime/read/usb_storage: Device: /dev/fuse
File System: fuse
Read-Write
/mnt/runtime/write/usb_storage: Device: /dev/fuse
File System: fuse
Read-Write
/system: Device: /dev/block/platform/emmc/by-name/system
File System: ext4
Read-Only
/cache: Device: /dev/block/platform/emmc/by-name/cache
File System: ext4
Read-Write
/metadata: Device: /dev/block/platform/emmc/by-name/metadata
File System: ext4
Read-Write
/data: Device: /dev/block/platform/emmc/by-name/userdata
File System: ext4
Read-Write
/storage: Device: tmpfs
File System: tmpfs
Read-Write
/storage/emulated: Device: /dev/fuse
File System: fuse
Read-Write
/storage/external_sd: Device: /dev/fuse
File System: fuse
Read-Write
/storage/usb_storage: Device: /dev/fuse
File System: fuse
Read-Write
/storage/self: Device: tmpfs
File System: tmpfs
Read-Write
<<< System Files >>>
Buddy Info: /proc/buddyinfo
Build Properties: /system/build.prop
Character & Block Devices: /proc/devices
Command Line: /proc/cmdline
CPU Information: /proc/cpuinfo
Default Properties: /default.prop
Execution Domains: /proc/execdomains
File Systems: /proc/filesystems
Frame Buffer Devices: /proc/fb
Hosts: /system/etc/hosts
Interrupts: /proc/interrupts
Input Devices: /proc/bus/input/devices
I/O Ports: /proc/ioports
Kernel Version: /proc/version
Load Average: /proc/loadavg
Locked Files: /proc/locks
Memory Information: /proc/meminfo
Memory Map: /proc/iomem
Misc Drivers: /proc/misc
Partitions: /proc/partitions
Statistics: /proc/stat
Swap Spaces: /proc/swaps
Hey there, did u manage to solve ur issue? I have the same
Hey there, did u manage to solve ur issue? I have the same
Hi all ... I fee like a noob again. Just got me a head unit for my 2003 Volvo V70 and I cannot find any info anywhere on the device .. I's a new (2 week old) unit purchaced though Amazon.nl but the basic device is as listed below (AIDA64 Report).
It claims to be an A23 system running Android 10, but from the 4 cores, Linux Kernel version and API level, it looks more to me like a pin-compatible A33 (possibly sitting on an A 23 board) and running Android 9 ... AIDA confirmed this.
My problems are that it is stuffed with non-disableable loader and vendor-installed sotftware which are all rubbish, various options (specifically things like Notification Access) are disabled, and the inbuilt loader and software seems to be getting in the way of my being able to run a good launcher and/or choose the right applications to launch. This may also be a hybrid based on a tablet .. I'm not sure ...
Looking for advice/help on how to root this particualt device so that I can at least disable the bloatware, and if possible a nice clean stripped down rom for such a device.
With guideance, I can prtovide any data and/or software from the device. I am current;y requesting an installable ROM from the vendor but I don't think it will happen ... keeping my fingers crossed.
AIDA 64 report in the following post
MCU : SA92G1.201024.V1.1-MCX
DVD : SA91G1.201024.V1.2-MCX-TTL-DL860
BUILD No: MCX.U16.3.USER.BUILD.20201117-095320
<<< System >>>
Manufacturer: Allwinner
Model: QUAD-CORE
Brand: Allwinner
Board: exdroid
Device: venus-a3
Hardware: sun8iw15p1
Platform: venus
Product: venus_a3
Installed RAM: 2 GB
Total Memory: 1997 MB
Available Memory: 786 MB
Internal Storage Total Space: 25.67 GB
Internal Storage Free Space: 23.46 GB
External Storage #1 Total Space: 31.24 GB
External Storage #1 Free Space: 30.68 GB
External Storage #2 Total Space: 116.46 GB
External Storage #2 Free Space: 116.01 GB
Bluetooth Version: 4+
Device Features: android.hardware.audio.output
android.hardware.bluetooth
android.hardware.bluetooth_le
android.hardware.camera
android.hardware.camera.any
android.hardware.camera.front
android.hardware.ethernet
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.ram.low
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.accessory
android.hardware.usb.host
android.hardware.wifi
android.hardware.wifi.direct
android.software.app_widgets
android.software.autofill
android.software.backup
android.software.cant_save_state
android.software.companion_device_setup
android.software.connectionservice
android.software.cts
android.software.device_admin
android.software.home_screen
android.software.input_methods
android.software.live_wallpaper
android.software.verified_boot
android.software.webview
<<< CPU >>>
Core Architecture: 4x ARM Cortex-A7 @ 1512 MHz
Instruction Set: 32-bit ARMv7
CPU Revision: r0p5
CPU Cores: 4 Cores
CPU Clock Range: 480 - 1512 MHz
Core 1 Clock: 1512 MHz
Core 2 Clock: 1512 MHz
Core 3 Clock: 1512 MHz
Core 4 Clock: 1512 MHz
Supported ABIs: armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
AES: Not Supported
NEON: Supported
PMULL: Not Supported
SHA1: Not Supported
SHA2: Not Supported
<<< Display >>>
Screen Resolution: 1024 * 600
Screen Size: 155 mm × 86 mm
Screen Diagonal: 6.98 inches
Pixel Density: 170 dpi (mdpi)
xdpi / ydpi: 168 / 177 dpi
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Refresh Rate: 59 Hz
Default Orientation: Landscape
OpenGL ES Version: 2.0
GPU Version: OpenGL ES 2.0 8c81e1f
OpenGL ES Extensions: GL_EXT_debug_marker
GL_OES_texture_npot
GL_OES_vertex_array_object
GL_OES_compressed_ETC1_RGB8_texture
GL_EXT_compressed_ETC1_RGB8_sub_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_depth24
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth_texture
GL_OES_packed_depth_stencil
GL_EXT_texture_format_BGRA8888
GL_OES_vertex_half_float
GL_EXT_blend_minmax
GL_OES_EGL_image_external
GL_OES_EGL_sync
GL_OES_rgb8_rgba8
GL_EXT_multisampled_render_to_texture
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_ARM_mali_program_binary
GL_EXT_shader_texture_lod
GL_EXT_robustness
GL_OES_depth_texture_cube_map
GL_KHR_debug
GL_ARM_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_OES_mapbuffer
<< Wi-Fi >>
5 GHz Band: Not Supported
Wi-Fi Aware: Not Supported
Wi-Fi Direct: Supported
<<< Battery >>>
Power Source: A/C Charger
Level: 0 %
Status: Charging
Health: Good
Technology: LiFe
Temperature: 30.0°C
Voltage: 0.001 V
Capacity (Reported by Android): 2850 mAh
<<< Android >>>
Android Version: 9 (Pie)
API Level: 28
Android Security Patch Level: 2019-01-05
Rooted Device: No
Android ID: 68c8e810c1581721
Build ID: MCX.UI6_3.USER.BUILD.20201117-095320
Codename: REL
Fingerprint: Allwinner/venus_a3/venus-a3:9/PPR1.181005.003/20201117-095320:user/test-keys
ID: PPR1.181005.003
Incremental: 20201117-095320
Java Runtime Version: Android Runtime 0.9
Java VM Version: ART 2.1.0
Java VM Heap Size: 192 MB
Kernel Architecture: armv7l
Kernel Version: 4.9.118
Tags: test-keys
Type: user
Google Play Services Version: 21.09.15 (110302-361652764)
Huawei Mobile Services Version: < Not Present >
OpenSSL Version: OpenSSL 1.1.0 (compatible; BoringSSL)
ZLib Version: 1.2.11
ICU CLDR Version: 32.0.1
ICU Library Version: 60.2
ICU Unicode Version: 10.0
Android Language: English (United States)
Configured Time Zone: Central European Summer Time (UTC+02:00)
UpTime: 00:23:15
<<< Devices >>>
No cameras found. Camera permission needs to be granted.
No USB devices found.
No OpenCL devices found.
No CUDA devices found.
No Vulkan devices found.
No PCI devices found.
<<< Directories >>>
Data: /data
Root: /system
Java Home: /system
Download/Cache Content: /data/cache
<< External Storage >>
Primary External Storage: /storage/emulated/0
External Files #1: /storage/emulated/0/Android/data/com.finalwire.aida64/files
External Files #2: /storage/sdcard/Android/data/com.finalwire.aida64/files
External Files #3: /storage/usb1/Android/data/com.finalwire.aida64/files
Alarms: /storage/emulated/0/Alarms
DCIM: /storage/emulated/0/DCIM
Downloads: /storage/emulated/0/Download
Movies: /storage/emulated/0/Movies
Music: /storage/emulated/0/Music
Notifications: /storage/emulated/0/Notifications
Pictures: /storage/emulated/0/Pictures
Podcasts: /storage/emulated/0/Podcasts
Ringtones: /storage/emulated/0/Ringtones
<< Mount Points >>
/: Device: /dev/root
File System: squashfs
Read-Only
/dev: Device: tmpfs
File System: tmpfs
Read-Write
/dev/pts: Device: devpts
File System: devpts
Read-Write
/dev/memcg: Device: none
File System: cgroup
Read-Write
/dev/cpuctl: Device: none
File System: cgroup
Read-Write
/dev/cg2_bpf: Device: cg2_bpf
File System: cgroup2
Read-Write
/dev/usb-ffs/adb: Device: adb
File System: functionfs
Read-Write
/proc: Device: proc
File System: proc
Read-Write
/sys: Device: sysfs
File System: sysfs
Read-Write
/sys/fs/selinux: Device: selinuxfs
File System: selinuxfs
Read-Write
/sys/kernel/debug: Device: debugfs
File System: debugfs
Read-Write
/sys/kernel/debug/tracing: Device: tracefs
File System: tracefs
Read-Write
/sys/fs/bpf: Device: bpf
File System: bpf
Read-Write
/sys/fs/pstore: Device: pstore
File System: pstore
Read-Write
/mnt: Device: tmpfs
File System: tmpfs
Read-Write
/mnt/runtime/default/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/runtime/read/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/runtime/write/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/media_rw/usb1: Device: /dev/block/vold/public:8,1
File System: fuseblk
Read-Write
/mnt/runtime/default/usb1: Device: /mnt/media_rw/usb1
File System: sdcardfs
Read-Write
/mnt/runtime/read/usb1: Device: /mnt/media_rw/usb1
File System: sdcardfs
Read-Write
/mnt/runtime/write/usb1: Device: /mnt/media_rw/usb1
File System: sdcardfs
Read-Write
/mnt/media_rw/sdcard: Device: /dev/block/vold/public:179,65
File System: vfat
Read-Write
/mnt/runtime/default/sdcard: Device: /mnt/media_rw/sdcard
File System: sdcardfs
Read-Write
/mnt/runtime/read/sdcard: Device: /mnt/media_rw/sdcard
File System: sdcardfs
Read-Write
/mnt/runtime/write/sdcard: Device: /mnt/media_rw/sdcard
File System: sdcardfs
Read-Write
/vendor: Device: /dev/block/by-name/vendor
File System: squashfs
Read-Only
/acct: Device: none
File System: cgroup
Read-Write
/config: Device: none
File System: configfs
Read-Write
/bootloader: Device: /dev/block/by-name/bootloader
File System: vfat
Read-Write
/data: Device: /dev/block/by-name/UDISK
File System: f2fs
Read-Write
/cache: Device: /dev/block/by-name/cache
File System: ext4
Read-Write
/storage: Device: tmpfs
File System: tmpfs
Read-Write
/storage/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/storage/usb1: Device: /mnt/media_rw/usb1
File System: sdcardfs
Read-Write
/storage/sdcard: Device: /mnt/media_rw/sdcard
File System: sdcardfs
Read-Write
/storage/self: Device: tmpfs
File System: tmpfs
Read-Write
<<< System Files >>>
Buddy Info: /proc/buddyinfo
Build Properties: /system/build.prop
Character & Block Devices: /proc/devices
Command Line: /proc/cmdline
CPU Information: /proc/cpuinfo
Default Properties: /default.prop
Execution Domains: /proc/execdomains
File Systems: /proc/filesystems
Frame Buffer Devices: /proc/fb
Hosts: /system/etc/hosts
Interrupts: /proc/interrupts
Input Devices: /proc/bus/input/devices
I/O Ports: /proc/ioports
Kernel Version: /proc/version
Load Average: /proc/loadavg
Locked Files: /proc/locks
Memory Information: /proc/meminfo
Memory Map: /proc/iomem
Misc Drivers: /proc/misc
Partitions: /proc/partitions
Statistics: /proc/stat
Swap Spaces: /proc/swaps
After doing loads of research I'm even more confused ...
CPU-Z reports the system as an Allwinner A23 ... And then tells me it's a 4 core processor .. the A23 is a 2 core .. but the A33 is pin compatible with the A23 and is a 4 core so is it an A33 masquerading as an A23 .. but there is also another question mark n in the mix ...
Anyone got any advice on how to proceed with this strange crossbreed of a device ?
Will I brick it if I try to root it as the wrong Allwinner device ?
Are you made root ?
Hi. I have also the Xomax XM-2VA757. And a root would be nice. Or better a clean Android included root.
Because i have many problems. i have no GPS in Apps, but GPS is working, as i used GPS-test app.
And for all Apps location is allowed. Also no rights, to get Android system notifications to be allowed for Apps.
The build in Musicplayer is very, ...trash. And many more. my old 4.2.2 Android works much better as my new. and costs only 1/3 of the new Device.
So, if anyone has an Idea how to get all this work or how to root this Device..?!?
thx.
My Radio: look here
S*** no radio unit, no support, no answer. I am trying enter to recovery mode
I neeed BIG Help for Wisdom Customize Android 9 tv OS go back AOSP Android tv OS
China 55" 4K Led TV I want AOSP Android TV OS Software
My tv :
-No Android Settings, -No Android Tv Launcher and no many AOSP apps
Product Details
1. Market: P150-2851V6.2 combines the power supply,the backlight drive,TV board as whole.
2. TV System: ATV and DVB-C/T/T2/S2.
3. P150-2851V6.2SupportsRJ45networksignal,USB2.0,AVIN,YPBPR,HDMI1.4,HDMI2.0andTVincludingATVandDTV.In the mean time, it can sustain WIFI access VGA+PC AUDIO Input and Coaxial/Optical Fiber and Earphone output.
4. Chipset: RTD2851SSZ
5. OSD Language: English,French,Spanish,Danish,Swedish,Finnish,Dutch
6. Audio Output: 2*[email protected]Ω
7. Resolution:UP to 2840*2160
8. CKD and SKD available---HARDWARE CONFIGURATION AND FUNCTIONOS Android 9.0CPU ARM Cortex A55 quad coreGPU Mali 470MP2DDR size 1.5GbyteEMMC Flash 8Gbyte
4K Android Smart TV SoC with Advanced Picture/Audio Quality (RTD2851/RTD2873)The RTD2851/RTD2873 Smart TV SoC (System on a Chip) supports Android Pie and Google Assistant TV voice control. It also supports all HDR formats, including Dolby Vision™, HDR10, Technicolor Prime, HLG, and HDR10+. It provides theater-like sound effects using the built-in TV speakers through decoding Dolby ATMOS™, and offers advanced picture and video processing for internet streaming contents
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<<< Aida64 Sysinfo Summary (English) >>>
DB Device Model: < unknown >
Manufacturer: MediaTek
Model: SMART TV
Brand: MediaTek
Board: m7332_eu
Device: m7332_eu
Hardware: m7332
Platform: m7332
Product: m7332_eu
SoC Model: < unknown >
RO SoC Model: < unknown >
Core Architecture: 4x ARM Cortex-A53 @ 1450 MHz
CPU Cores: 4
CPUInfo HW: m7332
CPUInfo ChipName: < empty >
CPUInfo MSM HW: < empty >
Screen Resolution: 1920 x 1080
Display Mode #1: 1920 x 1080
vendor.display-size: 3840x2160
OGLES Vendor: ARM
OGLES Renderer: Mali-G52
OGLES Version: OpenGL ES 3.2 v1.r16p0-01rel0-a319455b5-20190827.a188048ecd49603991a490e38a4a1861
Current GPU Clock: < unknown >
GPU Clock Range: < unknown >
GPU Utilization: < unknown >
Power Source: A/C Charger
Level: 100 %
Status: Charging
Charge Rate: 1.6 mA
Charge Rate (Raw): 1.6 mA
Android Version: 9 (Pie)
API Level: 28
Rooted Device: No
Bootloader: 123456789
Build ID: m7332_eu-userdebug 9 PPR2.180905.006.A1 TVOS-04.16.031.01.12 dev-keys
Codename: REL
Fingerprint: MediaTek/m7332_eu/m7332_eu:9/PPR2.180905.006.A1/builder06120124:userdebug/dev-keys
ID: PPR2.180905.006.A1
Incremental: TVOS-04.16.031.01.12
ro.boot.fpsensor: < empty >
Total RAM (ActMgr): 1328 MB
Total RAM (MemInfo): 1328 MB
Avail RAM (ActMgr): 540 MB
Avail RAM (MemInfo): 492 MB
Fake Dev (Android Rel): No
Fake Dev (Total RAM): No
Fake Dev (Avail RAM): No
getThisAppInstallerPackageName: com.android.packageinstaller
isThisAppSideLoaded: true
getAppInstallerPackageName(com.android.chrome): null
getAppInstallerPackageName(com.google.android.youtube): null
getAppInstallerPackageName(com.cpuid.cpu_z): null
getAppInstallerPackageName(com.eg.android.AlipayGphone): null
getAppInstallerPackageName(com.baidu.searchbox): null
getAppInstallerPackageName(com.huawei.global): null
<<< System >>>
Device Type: TV
Manufacturer: MediaTek
Model: SMART TV
Brand: MediaTek
Board: m7332_eu
Device: m7332_eu
Hardware: m7332
Platform: m7332
Product: m7332_eu
Installed RAM: 1.5 GB
Total Memory: 1328 MB
Available Memory: 539 MB
Internal Storage Total Space: 3016 MB
Internal Storage Free Space: 1597 MB
Bluetooth Version: 4+
Device Features: android.hardware.audio.output
android.hardware.bluetooth
android.hardware.bluetooth_le
android.hardware.camera.any
android.hardware.camera.external
android.hardware.ethernet
android.hardware.gamepad
android.hardware.hdmi.cec
android.hardware.opengles.aep
android.hardware.ram.low
android.hardware.screen.landscape
android.hardware.type.television
android.hardware.usb.host
android.hardware.vulkan.compute
android.hardware.vulkan.level
android.hardware.vulkan.version
android.hardware.wifi
android.hardware.wifi.direct
android.software.adoptable_storage
android.software.app_widgets
android.software.autofill
android.software.backup
android.software.cant_save_state
android.software.companion_device_setup
android.software.cts
android.software.home_screen
android.software.input_methods
android.software.leanback
android.software.leanback_only
android.software.live_tv
android.software.verified_boot
android.software.voice_recognizers
android.software.webview
com.google.android.tv.installed
nrdp.modelgroup
<<< CPU >>>
Core Architecture: 4x ARM Cortex-A53 @ 1450 MHz
Instruction Set: 64-bit ARMv8-A (32-bit Mode)
CPU Revision: r0p4
CPU Cores: 4
CPU Clock Range: 1150 - 1450 MHz
Core 1 Clock: 1449 MHz
Core 2 Clock: 1449 MHz
Core 3 Clock: 1449 MHz
Core 4 Clock: 1449 MHz
Scaling Governor: interactive
Supported ABIs: armeabi-v7a, armeabi
Supported 32-bit ABIs: armeabi-v7a, armeabi
AES: Supported
NEON: Supported
PMULL: Supported
SHA1: Supported
SHA2: Supported
<<< Display >>>
Screen Resolution: 1920 × 1080
xdpi / ydpi: 77 / 77 dpi
GPU Vendor: ARM
GPU Renderer: Mali-G52
GPU Cores: 1
Refresh Rate: 60 Hz
Default Orientation: Landscape
OpenGL ES Version: 3.2
GPU Version: OpenGL ES 3.2 v1.r16p0-01rel0-a319455b5-20190827.a188048ecd49603991a490e38a4a1861
OpenGL ES Extensions: GL_EXT_debug_marker
GL_ARM_rgba8
GL_ARM_mali_shader_binary
GL_OES_depth24
GL_OES_depth_texture
GL_OES_depth_texture_cube_map
GL_OES_packed_depth_stencil
GL_OES_rgb8_rgba8
GL_EXT_read_format_bgra
GL_OES_compressed_paletted_texture
GL_OES_compressed_ETC1_RGB8_texture
GL_OES_standard_derivatives
GL_OES_EGL_image
GL_OES_EGL_image_external
GL_OES_EGL_image_external_essl3
GL_OES_EGL_sync
GL_OES_texture_npot
GL_OES_vertex_half_float
GL_OES_required_internalformat
GL_OES_vertex_array_object
GL_OES_mapbuffer
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_rg
GL_EXT_texture_type_2_10_10_10_REV
GL_OES_fbo_render_mipmap
GL_OES_element_index_uint
GL_EXT_shadow_samplers
GL_OES_texture_compression_astc
GL_KHR_texture_compression_astc_ldr
GL_KHR_texture_compression_astc_hdr
GL_KHR_texture_compression_astc_sliced_3d
GL_EXT_texture_compression_astc_decode_mode
GL_EXT_texture_compression_astc_decode_mode_rgb9e5
GL_KHR_debug
GL_EXT_occlusion_query_boolean
GL_EXT_disjoint_timer_query
GL_EXT_blend_minmax
GL_EXT_discard_framebuffer
GL_OES_get_program_binary
GL_OES_texture_3D
GL_EXT_texture_storage
GL_EXT_multisampled_render_to_texture
GL_EXT_multisampled_render_to_texture2
GL_OES_surfaceless_context
GL_OES_texture_stencil8
GL_EXT_shader_pixel_local_storage
GL_ARM_shader_framebuffer_fetch
GL_ARM_shader_framebuffer_fetch_depth_stencil
GL_ARM_mali_program_binary
GL_EXT_sRGB
GL_EXT_sRGB_write_control
GL_EXT_texture_sRGB_decode
GL_EXT_texture_sRGB_R8
GL_EXT_texture_sRGB_RG8
GL_KHR_blend_equation_advanced
GL_KHR_blend_equation_advanced_coherent
GL_OES_texture_storage_multisample_2d_array
GL_OES_shader_image_atomic
GL_EXT_robustness
GL_EXT_draw_buffers_indexed
GL_OES_draw_buffers_indexed
GL_EXT_texture_border_clamp
GL_OES_texture_border_clamp
GL_EXT_texture_cube_map_array
GL_OES_texture_cube_map_array
GL_OES_sample_variables
GL_OES_sample_shading
GL_OES_shader_multisample_interpolation
GL_EXT_shader_io_blocks
GL_OES_shader_io_blocks
GL_EXT_tessellation_shader
GL_OES_tessellation_shader
GL_EXT_primitive_bounding_box
GL_OES_primitive_bounding_box
GL_EXT_geometry_shader
GL_OES_geometry_shader
GL_ANDROID_extension_pack_es31a
GL_EXT_gpu_shader5
GL_OES_gpu_shader5
GL_EXT_texture_buffer
GL_OES_texture_buffer
GL_EXT_copy_image
GL_OES_copy_image
GL_EXT_shader_non_constant_global_initializers
GL_EXT_color_buffer_half_float
GL_EXT_color_buffer_float
GL_EXT_YUV_target
GL_OVR_multiview
GL_OVR_multiview2
GL_OVR_multiview_multisampled_render_to_texture
GL_KHR_robustness
GL_KHR_robust_buffer_access_behavior
GL_EXT_draw_elements_base_vertex
GL_OES_draw_elements_base_vertex
GL_EXT_protected_textures
GL_EXT_buffer_storage
GL_EXT_external_buffer
GL_EXT_EGL_image_array
<<< Network >>>
<< Telephony >>
Phone Type: None
<< Wi-Fi >>
State: Enabled
SSID: < private >
BSSID: < private >
Hidden SSID: Yes
IPv4 Address: < private >
IPv6 Address: < private >
Signal Strength: -35 dBm (Excellent)
Link Speed: 135 Mbps
Frequency: 2412 MHz
Network ID: 0
Gateway: < private >
Netmask: 255.255.255.0
DNS1: < private >
DHCP Lease Duration: 24 hours
5 GHz Band: Not Supported
Wi-Fi Aware: Not Supported
Wi-Fi Direct: Supported
<<< Battery >>>
Power Source: A/C Charger
Level: 100 %
Status: Charging
Health: Good
Technology: Li-ion
Temperature: 42.4°C
Voltage: 45.000 V
Charge Counter: 0 mAh
Charge Rate: 1.60 mA
<<< Android >>>
Android Version: 9 (Pie)
API Level: 28
Android Security Patch Level: 2019-06-01
Rooted Device: No
Android ID: 00c6e6eeb37e4da8
Bootloader: 123456789
Build ID: m7332_eu-userdebug 9 PPR2.180905.006.A1 TVOS-04.16.031.01.12 dev-keys
Codename: REL
Fingerprint: MediaTek/m7332_eu/m7332_eu:9/PPR2.180905.006.A1/builder06120124:userdebug/dev-keys
ID: PPR2.180905.006.A1
Incremental: TVOS-04.16.031.01.12
Java Runtime Version: Android Runtime 0.9
Java VM Version: ART 2.1.0
Java VM Heap Size: 192 MB
Kernel Architecture: armv7l
Kernel Version: 4.9.118+
Tags: dev-keys
Type: userdebug
Google Play Services Version: 16.0.89 (100300-239467275)
Huawei Mobile Services Version: < Not Present >
OpenSSL Version: OpenSSL 1.1.0 (compatible; BoringSSL)
ZLib Version: 1.2.11
ICU CLDR Version: 32.0.1
ICU Library Version: 60.2
ICU Unicode Version: 10.0
Android Language: Turkish (Turkey)
Configured Time Zone: Arabian Standard Time (UTC+03:00)
UpTime: 05:44:22
<<< Devices >>>
<< External Camera >>
Resolution: 2.1 MP (1920 × 1080)
Focus Modes: fixed, infinity
Video Stabilization: Not Supported
Zoom: Supported
Auto Exposure Locking: Not Supported
Auto White Balance Locking: Not Supported
Flash: Not Supported
<< Vulkan Device - Mali-G52 >>
Device Name: Mali-G52
Device Type: Integrated GPU
Device UUID: 20-E7-92-C6-F5-DE-89-0B-F7-A8-CC-CA-9D-DE-66-B8
Device ID: 000013B5-74021000
Memory Size: 1360744 KB
Max 1D Image Size: 16384
Max 2D Image Size: 8192 x 8192
Max 3D Image Size: 4096 x 4096 x 4096
Max Cube Image Size: 8192 x 8192
Max Image Layers: 256
Max Texel Buffer Elements: 65536
Max Uniform Buffer Range: 65536
Max Storage Buffer Range: 268435456
Max Push Constants Size: 256 bytes
Buffer Image Granularity: 4 KB
Max Bound Descriptor Sets: 4
Max Per-Stage Descriptor Samplers: 128
Max Per-Stage Descriptor Uniform Buffers: 12
Max Per-Stage Descriptor Storage Buffers: 35
Max Per-Stage Descriptor Sampled Images: 16
Max Per-Stage Descriptor Storage Images: 8
Max Per-Stage Descriptor Input Attachments: 4
Max Per-Stage Resources: 83
Max Descriptor Set Samplers: 768
Max Descriptor Set Uniform Buffers: 72
Max Descriptor Set Dynamic Uniform Buffers: 8
Max Descriptor Set Storage Buffers: 210
Max Descriptor Set Dynamic Storage Buffers: 4
Max Descriptor Set Sampled Images: 96
Max Descriptor Set Storage Images: 48
Max Descriptor Set Input Attachments: 4
Max Vertex Input Attributes: 16
Max Vertex Input Bindings: 16
MaxVertex Input Attribute Offset: 2047
Max Vertex Input Binding Stride: 2048
Max Vertex Output Components: 128
Max Tesselation Generation Level: 64
Max Tesselation Patch Size: 32
Max Tesselation Control Per-Vertex Input Components: 128
Max Tesselation Control Per-Vertex Output Components: 128
Max Tesselation Control Per-Patch Output Components: 120
Max Tesselation Control Total Output Components: 4096
Max Tesselation Evaluation Input Components: 128
Max Tesselation Evaluation Output Components: 128
Max Geometry Shader Invocations: 32
Max Geometry Input Components: 64
Max Geometry Output Components: 128
Max Geometry Output Vertices: 256
Max Geometry Total Output Components: 1024
Max Fragment Input Components: 128
Max Fragment Output Attachments: 8
Max Fragment Combined Output Resources: 51
Max Compute Shared Memory Size: 32 KB
Max Compute Work Group Invocations: 384
Max Compute Work Group Size: X: 384, Y: 384, Z: 384
Subpixel Precision Bits: 8
Subtexel Precision Bits: 8
Mipmap Precision Bits: 8
Max Draw Indexed Index Value: 4294967295
Max Draw Indirect Count: 1
Max Sampler LOD Bias: 255.000000
Max Sampler Anisotropy: 16.000000
Max Viewports: 1
Max Viewport Size: 8192 x 8192
Viewport Bounds Range: -16384.000000 ... 16383.000000
Min Memory Map Alignment: 64 bytes
Min Texel Buffer Offset Alignment: 256 bytes
Min Uniform Buffer Offset Alignment: 16 bytes
Min Storage Buffer Offset Alignment: 256 bytes
Min / Max Texel Offset: -8 / 7
Min / Max Texel Gather Offset: -8 / 7
Min / Max Interpolation Offset: -0.500000 / 0.500000
Subpixel Interpolation Offset Bits: 4
Max Framebuffer Size: 8192 x 8192
Max Framebuffer Layers: 256
Framebuffer Color Sample Counts: 0x00000005
Framebuffer Depth Sample Counts: 0x00000005
Framebuffer Stencil Sample Counts: 0x00000005
Framebuffer No Attachments Sample Counts: 0x0000001D
Max Color Attachments: 8
Sampled Image Color Sample Counts: 0x00000005
Sampled Image Integer Sample Counts: 0x00000001
Sampled Image Depth Sample Counts: 0x00000005
Sampled Image Stencil Sample Counts: 0x00000005
Storage Image Sample Counts: 0x00000001
Max Sample Mask Words: 1
Discrete Queue Priorities: 2
Point Size Range: 1.000000 ... 1024.000000
Line Width Range: 1.000000 ... 1.000000
Point Size Granularity: 0.062500
Optimal Buffer Copy Offset Alignment: 64 bytes
Optimal Buffer Copy Row Pitch Alignment: 64 bytes
Non-Coherent Atom Size: 64 bytes
Driver Version: 16.0.0
API Version: 1.1.82
Vulkan Library: /system/lib/libvulkan.so
Alpha To One: Not Supported
Anisotropic Filtering: Supported
ASTC LDR Texture Compression: Supported
BC Texture Compression: Not Supported
Depth Bias Clamping: Supported
Depth Bounds Tests: Not Supported
Depth Clamping: Not Supported
Draw Indirect First Instance: Supported
Dual Source Blend Operations: Not Supported
ETC2 and EAC Texture Compression: Supported
Fragment Stores and Atomics: Supported
Full Draw Index Uint32: Supported
Geometry Shader: Supported
Image Cube Array: Supported
Independent Blend: Supported
Inherited Queries: Not Supported
Large Points: Supported
Logic Operations: Not Supported
Multi-Draw Indirect: Not Supported
Multi Viewport: Not Supported
Occlusion Query Precise: Supported
Pipeline Statistics Query: Not Supported
Point and Wireframe Fill Modes: Not Supported
Robust Buffer Access: Supported
Sample Rate Shading: Supported
Shader Clip Distance: Not Supported
Shader Cull Distance: Not Supported
Shader Float64: Not Supported
Shader Image Gather Extended: Supported
Shader Int16: Supported
Shader Int64: Not Supported
Shader Resource Min LOD: Not Supported
Shader Resource Residency: Not Supported
Shader Sampled Image Array Dynamic Indexing: Supported
Shader Storage Buffer Array Dynamic Indexing: Supported
Shader Storage Image Array Dynamic Indexing: Supported
Shader Storage Image Extended Formats: Supported
Shader Storage Image Multisample: Not Supported
Shader Storage Image Read Without Format: Supported
Shader Storage Image Write Without Format: Supported
Shader Tesselation and Geometry Point Size: Not Supported
Shader Uniform Buffer Array Dynamic Indexing: Supported
Sparse Binding: Not Supported
Sparse Residency 2 Samples: Not Supported
Sparse Residency 4 Samples: Not Supported
Sparse Residency 8 Samples: Not Supported
Sparse Residency 16 Samples: Not Supported
Sparse Residency Aliased: Not Supported
Sparse Residency Aligned Mip Size: No
Sparse Residency Buffer: Not Supported
Sparse Residency Image 2D: Not Supported
Sparse Residency Image 3D: Not Supported
Sparse Residency Non-Resident Strict: No
Sparse Residency Standard 2D Block Shape: No
Sparse Residency Standard 2D Multisample Block Shape: No
Sparse Residency Standard 3D Block Shape: No
Standard Sample Locations: Yes
Strict Line Rasterization: Yes
Tesselation Shader: Supported
Timestamps on All Graphics and Compute Queues: Not Supported
Variable Multisample Rate: Not Supported
Vertex Pipeline Stores and Atomics: Not Supported
Wide Lines: Not Supported
Device Extensions: VK_KHR_incremental_present
VK_KHR_shared_presentable_image
VK_GOOGLE_display_timing
VK_KHR_16bit_storage
VK_KHR_bind_memory2
VK_KHR_dedicated_allocation
VK_KHR_descriptor_update_template
VK_KHR_external_fence
VK_KHR_external_fence_fd
VK_KHR_external_memory
VK_KHR_external_semaphore
VK_KHR_external_semaphore_fd
VK_KHR_get_memory_requirements2
VK_KHR_image_format_list
VK_KHR_maintenance1
VK_KHR_maintenance2
VK_KHR_sampler_ycbcr_conversion
VK_KHR_shader_draw_parameters
VK_KHR_storage_buffer_storage_class
VK_KHR_variable_pointers
VK_KHR_create_renderpass2
VK_KHR_maintenance3
VK_KHR_relaxed_block_layout
VK_KHR_device_group
VK_KHR_multiview
VK_EXT_queue_family_foreign
VK_KHR_swapchain
Instance Extensions: VK_KHR_surface
VK_KHR_android_surface
VK_EXT_swapchain_colorspace
VK_KHR_get_surface_capabilities2
VK_EXT_debug_report
VK_KHR_external_fence_capabilities
VK_KHR_external_memory_capabilities
VK_KHR_external_semaphore_capabilities
VK_KHR_get_physical_device_properties2
VK_KHR_device_group_creation
No USB devices found.
No OpenCL devices found.
No CUDA devices found.
No PCI devices found.
<<< Thermal >>>
Battery: 42.4°C
<<< Sensors >>>
No sensors found.
<<< Directories >>>
Data: /data
Root: /system
Java Home: /system
Download/Cache Content: /data/cache
<< External Storage >>
Primary External Storage: /storage/emulated/0
External Files #1: /storage/emulated/0/Android/data/com.finalwire.aida64/files
Alarms: /storage/emulated/0/Alarms
Downloads: /storage/emulated/0/Download
Music: /storage/emulated/0/Music
Notifications: /storage/emulated/0/Notifications
Pictures: /storage/emulated/0/Pictures
<< Mount Points >>
/: Device: /dev/root
File System: ext4
Read-Only
/dev: Device: devtmpfs
File System: devtmpfs
Read-Write
/dev: Device: tmpfs
File System: tmpfs
Read-Write
/dev/pts: Device: devpts
File System: devpts
Read-Write
/dev/cpuctl: Device: none
File System: cgroup
Read-Write
/dev/cpuset: Device: none
File System: cgroup
Read-Write
/dev/cg2_bpf: Device: cg2_bpf
File System: cgroup2
Read-Write
/dev/usb-ffs/adb: Device: adb
File System: functionfs
Read-Write
/proc: Device: proc
File System: proc
Read-Write
/sys: Device: sysfs
File System: sysfs
Read-Write
/sys/fs/selinux: Device: selinuxfs
File System: selinuxfs
Read-Write
/sys/kernel/debug: Device: debugfs
File System: debugfs
Read-Write
/sys/kernel/debug/tracing: Device: tracefs
File System: tracefs
Read-Write
/sys/fs/bpf: Device: bpf
File System: bpf
Read-Write
/mnt: Device: tmpfs
File System: tmpfs
Read-Write
/mnt/vendor/tvservice: Device: /dev/block/platform/mstar_mci.0/by-name/tvservice
File System: ext4
Read-Only
/mnt/vendor/linux_rootfs: Device: /dev/block/platform/mstar_mci.0/by-name/linux_rootfs_a
File System: squashfs
Read-Only
/mnt/vendor/3rd: Device: /dev/block/platform/mstar_mci.0/by-name/3rd_a
File System: squashfs
Read-Only
/mnt/runtime/default/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/runtime/read/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/mnt/runtime/write/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/vendor: Device: /dev/block/platform/mstar_mci.0/by-name/vendor
File System: ext4
Read-Only
/vendor/tvconfig: Device: /dev/block/platform/mstar_mci.0/by-name/tvconfig
File System: ext4
Read-Write
/vendor/tvcertificate: Device: /dev/block/platform/mstar_mci.0/by-name/tvcertificate
File System: ext4
Read-Write
/acct: Device: none
File System: cgroup
Read-Write
/config: Device: none
File System: configfs
Read-Write
/data: Device: /dev/block/platform/mstar_mci.0/by-name/userdata
File System: ext4
Read-Write
/data/vendor/tmp: Device: tmpfs
File System: tmpfs
Read-Write
/data/vendor/tmp: Device: tmpfs
File System: tmpfs
Read-Write
/data/vendor/3rd_rw: Device: /dev/block/platform/mstar_mci.0/by-name/3rd_rw
File System: ext4
Read-Write
/cache: Device: /dev/block/platform/mstar_mci.0/by-name/cache
File System: ext4
Read-Write
/factory: Device: /dev/block/platform/mstar_mci.0/by-name/factory_a
File System: ext4
Read-Write
/storage: Device: tmpfs
File System: tmpfs
Read-Write
/storage/emulated: Device: /data/media
File System: sdcardfs
Read-Write
/storage/self: Device: tmpfs
File System: tmpfs
Read-Write
<<< External Dirs >>>
ExternalStorageDir = /storage/emulated/0
ExternalFilesDirs[0] = /storage/emulated/0/Android/data/com.finalwire.aida64/files
SDCardMountPoint[0] = /mnt/sdcard
<<< /proc/cpuinfo >>>
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 2884.97
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 2884.97
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 2884.97
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 2884.97
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : m7332
Revision : 0020
Serial : 0000000000000000
Hardware : m7332
<<< /proc/meminfo >>>
MemTotal: 1360744 kB
MemFree: 68052 kB
MemAvailable: 494524 kB
Buffers: 7088 kB
Cached: 475488 kB
SwapCached: 6560 kB
Active: 478848 kB
Inactive: 258360 kB
Active(anon): 153796 kB
Inactive(anon): 103916 kB
Active(file): 325052 kB
Inactive(file): 154444 kB
Unevictable: 2548 kB
Mlocked: 2548 kB
HighTotal: 913408 kB
HighFree: 18600 kB
LowTotal: 447336 kB
LowFree: 49452 kB
SwapTotal: 511996 kB
SwapFree: 227632 kB
Dirty: 68 kB
Writeback: 0 kB
AnonPages: 255772 kB
Mapped: 340752 kB
Shmem: 980 kB
Slab: 58880 kB
SReclaimable: 20080 kB
SUnreclaim: 38800 kB
KernelStack: 14864 kB
PageTables: 40324 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 1192368 kB
Committed_AS: 32467388 kB
VmallocTotal: 557056 kB
VmallocUsed: 0 kB
VmallocChunk: 0 kB
CmaTotal: 69632 kB
CmaFree: 31580 kB
<<< Directory /system/lib >>>
libLLVM_android.so
libaudioclient.so
libvulkan.so
<<< Directory /system/vendor/lib >>>
libOpenCL.so
<<< Directory /system/vendor/lib/egl >>>
libGLES_mali.so
<<< GpuSysFs Files >>>
/sys/devices/platform/gpusysfs/gpu_clock: < Failed >
/sys/devices/platform/gpusysfs/gpu_cores_config: < Failed >
/sys/devices/platform/gpusysfs/gpu_freq_table: < Failed >
/sys/devices/platform/gpusysfs/gpu_governor: < Failed >
/sys/devices/platform/gpusysfs/gpu_max_clock: < Failed >
/sys/devices/platform/gpusysfs/gpu_mem: < Failed >
/sys/devices/platform/gpusysfs/gpu_min_clock: < Failed >
/sys/devices/platform/gpusysfs/gpu_model: < Failed >
/sys/devices/platform/gpusysfs/gpu_tmu: < Failed >
/sys/devices/platform/gpusysfs/gpu_version: < Failed >
/sys/devices/platform/gpusysfs/gpu_voltage: < Failed >
<<< Mali Files >>>
/sys/devices/platform/mali.0/clock: < Failed >
/sys/class/misc/mali0/device/asv_table: < Failed >
/sys/class/misc/mali0/device/available_frequencies: < Failed >
/sys/class/misc/mali0/device/clock: < Failed >
/sys/class/misc/mali0/device/core_mask: *** Current core mask (JS0) : 0x1
Current core mask (JS1) : 0x1
Current core mask (JS2) : 0x1
Available core mask : 0x1
***
/sys/class/misc/mali0/device/dvfs_governor: < Failed >
/sys/class/misc/mali0/device/dvfs_table: < Failed >
/sys/class/misc/mali0/device/norm_utilization: < Failed >
/sys/class/misc/mali0/device/utilization: < Failed >
/sys/class/misc/mali0/device/utilization_stats: < Failed >
/sys/class/misc/mali0/device/vol: < Failed >
<<< OMAP Files >>>
/sys/kernel/debug/clock/virt_38400000_ck/sys_clkin_ck/dpll_per_ck/dpll_per_x2_ck/dpll_per_m7x2_ck/gpu_fck/rate: < Failed >
/sys/kernel/debug/clock/virt_38400000_ck/sys_clkin_ck/dpll_per_ck/dpll_per_x2_ck/dpll_per_m7x2_ck/gpu_fck/flags: < Failed >
<<< PXA Files >>>
/sys/kernel/debug/pxa/cp15: < Failed >
/sys/devices/platform/pxa-ion/modalias: < Failed >
/sys/devices/platform/pxa-ion/subsystem/devices/pxa1088-thermal/modalias: < Failed >
<<< Tegra Files >>>
/sys/devices/soc0/family: < Failed >
/sys/devices/soc0/revision: < Failed >
/sys/devices/soc0/soc_id: < Failed >
<<< CPUFreq >>>
CPU0: < Failed > / 1150000 / 1450000 // 1150000 / 1150000 / < Failed >
CPU1: < Failed > / 1150000 / 1450000 // 1350000 / 1150000 / 1450000
CPU2: < Failed > / 1150000 / 1450000 // 1350000 / 1150000 / 1450000
CPU3: < Failed > / 1150000 / 1450000 // 1350000 / 1150000 / 1450000
<<< Battery Files >>>
/sys/class/power_supply/battery/batt_attr_text: < Failed >
/sys/class/power_supply/battery/batt_current: < Failed >
/sys/class/power_supply/battery/batt_current_now: < Failed >
/sys/class/power_supply/battery/batt_current_ua_avg: < Failed >
/sys/class/power_supply/battery/batt_current_ua_now: < Failed >
/sys/class/power_supply/battery/batt_power_meter: < Failed >
/sys/class/power_supply/battery/BatteryAverageCurrent: < Failed >
/sys/class/power_supply/battery/charge_counter: < Failed >
/sys/class/power_supply/battery/charge_counter_ext: < Failed >
/sys/class/power_supply/battery/charge_now: < Failed >
/sys/class/power_supply/battery/chg_current_adc: < Failed >
/sys/class/power_supply/battery/chg_temp: < Failed >
/sys/class/power_supply/battery/current_avg: < Failed >
/sys/class/power_supply/battery/current_now: < Failed >
/sys/class/power_supply/battery/energy_now: < Failed >
/sys/class/power_supply/battery/time_to_empty_now: < Failed >
/sys/class/power_supply/battery/time_to_full_now: < Failed >
/sys/class/power_supply/battery/usb_temp: < Failed >
/sys/class/power_supply/battery/voltage_now: < Failed >
/sys/devices/platform/battery/power_supply/battery/BatteryAverageCurrent: < Failed >
<<< Misc Files >>>
<<< TelephonyManager Method Names >>>
public int android.telephony.TelephonyManager.getDataActivity() declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getDataNetworkType() declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getDataNetworkType(int) declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getDataState() declared by class android.telephony.TelephonyManager
public static android.telephony.TelephonyManager android.telephony.TelephonyManager.getDefault() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkCountryIso() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkCountryIso(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkCountryIsoForPhone(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkOperator() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkOperator(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkOperatorForPhone(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkOperatorName() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkOperatorName(int) declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getNetworkType() declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getNetworkType(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getNetworkTypeName() declared by class android.telephony.TelephonyManager
public static java.lang.String android.telephony.TelephonyManager.getNetworkTypeName(int) declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getPhoneCount() declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getPhoneType() declared by class android.telephony.TelephonyManager
public static int android.telephony.TelephonyManager.getPhoneType(int) declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getSimCount() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimCountryIso() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimCountryIso(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimCountryIsoForPhone(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimOperator() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimOperator(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimOperatorName() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimOperatorName(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimOperatorNameForPhone(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimOperatorNumeric() declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimOperatorNumeric(int) declared by class android.telephony.TelephonyManager
public java.lang.String android.telephony.TelephonyManager.getSimOperatorNumericForPhone(int) declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getSimState() declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getSimState(int) declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getVoiceMessageCount() declared by class android.telephony.TelephonyManager
public int android.telephony.TelephonyManager.getVoiceMessageCount(int) declared by class android.telephony.TelephonyManager
public boolean android.telephony.TelephonyManager.hasIccCard() declared by class android.telephony.TelephonyManager
public boolean android.telephony.TelephonyManager.hasIccCard(int) declared by class android.telephony.TelephonyManager
public boolean android.telephony.TelephonyManager.isNetworkRoaming() declared by class android.telephony.TelephonyManager
public boolean android.telephony.TelephonyManager.isNetworkRoaming(int) declared by class android.telephony.TelephonyManager
public void android.telephony.TelephonyManager.setNetworkCountryIso(java.lang.String) declared by class android.telephony.TelephonyManager
public void android.telephony.TelephonyManager.setNetworkCountryIsoForPhone(int,java.lang.String) declared by class android.telephony.TelephonyManager
public void android.telephony.TelephonyManager.setSimCountryIsoForPhone(int,java.lang.String) declared by class android.telephony.TelephonyManager
<<< Comment >>>
Enter your comment here:
Click to expand...
Click to collapse
I want Orginal (non touch) no customization Android tv OS
this file Distributor update customization Android9 https://drive.google.com/drive/u/0/folders/1TNq91duEnXrfUpzjH0DMr9Ln_XQwkUiH
i have a different tv name with the same motherboard and features.... i am very interested in having a stock firmware too (mine looks exactly like yours). I have flashed yours on my tv, so I am sure it works. The only difference is that now my tv says dijitsu instead of akai and the remote controller does not work....
your firmware is much better than mine by the way... it has apple play, play store and an app to control the device with the phone. it is a shame that the remote does not work, otherwise i would have kept it!
EnzoErrichiello said:
i have a different tv name with the same motherboard and features.... i am very interested in having a stock firmware too (mine looks exactly like yours). I have flashed yours on my tv, so I am sure it works. The only difference is that now my tv says dijitsu instead of akai and the remote controller does not work....
Click to expand...
Click to collapse
Hi
I have similar TV on different name. the customized Android OS have none of Google Apps and I even if I install google play by my self it didn't run.
Do you find any good firmware?
and how do you manage to upgrade above firmware?
yaser.k said:
Hi
I have similar TV on different name. the customized Android OS have none of Google Apps and I even if I install google play by my self it didn't run.
Do you find any good firmware?
and how do you manage to upgrade above firmware?
Click to expand...
Click to collapse
Hey,
In the end I used the firmware the author attached here. To have my remote working again, I then flashed a minor update released by AKAI, which is my tv.
I haven't found a stock firmware yet, but I'll let you know if I do.
EnzoErrichiello said:
Hey,
In the end I used the firmware the author attached here. To have my remote working again, I then flashed a minor update released by AKAI, which is my tv.
I haven't found a stock firmware yet, but I'll let you know if I do.
Click to expand...
Click to collapse
Hey Enzo
could you tell me how update with this firmware?
I extract rar file and there was 3 bin file. I copy all on usb drive attach to tv.
I go to system upgrade > local upgrade. but it didn't detect file on flash.
also I try hold power bottom and plug in but it also dont work.
yaser.k said:
Hey Enzo
could you tell me how update with this firmware?
I extract rar file and there was 3 bin file. I copy all on usb drive attach to tv.
I go to system upgrade > local upgrade. but it didn't detect file on flash.
also I try hold power bottom and plug in but it also dont work.
Click to expand...
Click to collapse
Hey sorry for the late reply!
I renamed that firmware with the name of my firmware. If you need to switch back, you need to do the opposite
Do have a TV set with Mediatek m7332 chip, Android 9.
You have an app to control TV via phone? Maybe that can be copied to other TVs too?
I am new to SmartTV but would be curious to learn.
i found that the remote control configuration is saved in a file in the system folder of tv "/vendor/tvconfig/config/ir_config.ini'.
Because tv isnt rooted yet, you need to access to this file via adb, allowing access to system files by adb and make copy of your oryginal config file, then replace it after flashing another firmware.
It worked on akai, nordmende, manta, and dijitsu firmwares on my Manta tv with TP.SK706S.PC822 board and with Mediatek m7332 chip.
● To enable ADB you have to go to hidden 'service menu' by pressing buttons (MENU) + (1) + (1) + (4) + (7).
If the service menu will appear, then you need to go to the ''debug'' option and then switch ''adb enable'' to 'on'.
[In other brands than Akai, Dijitsu, Manta, Nordmende, the service code may be different.]
You can try to enable ADB via AndroidHiddenSettings app, getting acces thru 'Developer Settings'.
Screenshots in: post-87570305
● Then you can explore your tv file system from your android phone by the Bugjaeger Mobile ADB app after connecting it thru wifi by ip of your tv.
Press button 'connect to' where you can 'search' for adb device or you can type tvs ip manually.
Now You can view system folders, copy files, install apps thru adb wifi, reboot system to recovery etc etc.
Files inside the system are still read only, so you cant delete/replace nothing yet, and some of the system folders are hidden at this time.
To make file system read and write enabled You have to use ADB command thru your PC/laptop.
● So you need to download some Minimal Adb Tool or ADBappControl for windows.
• Minimal ADB Tool (ADB.exe) run in 'windows command prompt' (cmd.exe) by typing:
adb connect 192.168.**.*** (-type your tvs ip, you can find tvs ip in main 'service menu')
adb root
adb remount
• ADBappControl with bulid-in ADB also allows you type those commands, has a pretty nice interface that allows you to install/uninstall disable apps.
It just don't have file manager, so 'bugjaeger' is still needed for the next step.
● Now file system is read and write enabled and you can backup your oryginal 'ir_config.ini', thru 'bugjaeger' app in section "files'.
The same way replace it after flashing another firmware.
At this time You can modify, replace/remove system apps as youtube, netflix, etc.
Read/write file system is enabled only till reboot. after reboot you need to redo pc ADB commands to get acces to r/w file system.
btw.
Section 'packages' in 'bugjaeger' app let you send and install apps downloaded/installed on your phone to your tv thru wifi. You can also run apps or disable/enable apps thru this section, instead of removing them from the system.
Section 'command' let you grant some special permision of some app if you need it.
Section 'fastboot' let you quick reboot your device, or reboot to recovery.
EDIT.: Added in attachment a remote config file working with my stock (manta) tv remote.
Anyway, better make Your own backup if You can.
yaser.k said:
Hey Enzo
could you tell me how update with this firmware?
I extract rar file and there was 3 bin file. I copy all on usb drive attach to tv.
I go to system upgrade > local upgrade. but it didn't detect file on flash.
also I try hold power bottom and plug in but it also dont work.
Click to expand...
Click to collapse
The best way to to flash firmware to your TV (with TP.SK706S.PC822 board) is:
-Rename your firmware file, for example from 'allupgrade706_8GB_1P5GB_ref71.bin' to 'allupgrade706_8GB_1P5GB_sos.bin.
-copy firmware file to your pendrive, formatted to the 'FAT32' filesystem, (probably the best working is up to 8Gb capicity pendrive.)
Unplug your Tv from the power supply, wait till the standby LED turn off.
-Then plug your pendrive to Tvs usb slot.
Plug Your Tv to power supply and wait for firmware upgrade blue screen.
-Wait till 100%, Unplug your Tv from the power supply, unplug pendrive then connect to power supply again, and power it on by tv 'power button'.
In Case of any issues with Android Tv system like Boot Loop etc, i found file MstarUpgrade Android Recovery Software by @KazmiElecom, that boots up Tv to 'Recovery Mode', so you can do wipe data/factory reset or anything from recovery mode.
Same process as upgrade firmware:
just rename file, in this case "MstarUpgrade.bin" to "allupgrade706_8GB_1P5GB_sos.bin" and plug to tv's usb slot.
Connect Tv to power supply, and when you'll see the completed 100% "Upgrade firmware" on a blue screen,
- Reconnect Tv again and it will boot up in Recovery Mode for once.
It works probably with many others Mstar / Mediatek chip boards.
Emilson said:
In Case of any issues with Android Tv system like Boot Loop etc, i found file MstarUpgrade Android Recovery Software by @KazmiElecom, that boots up Tv to 'Recovery Mode', so you can do wipe data/factory reset or anything from recovery mode.
Same process as upgrade firmware:
just rename file, in this case "MstarUpgrade.bin" to "allupgrade706_8GB_1P5GB_sos.bin" and plug to tv's usb slot.
Connect Tv to power supply, and when you'll see the completed 100% "Upgrade firmware" on a blue screen,
- Reconnect Tv again and it will boot up in Recovery Mode for once.
It works probably with many others Mstar / Mediatek chip boards.
Click to expand...
Click to collapse
I tried doing this but i am stuck at "no command". tried randomly pushing buttons on the tv but nothing is happening. sad, my OS is Android 11 Wisdom Share. I think it is stuck at boot because I messed with the build.prop
I am new to SmartTV but would be curious to learn.
لدي تلفاز nordmende ماهو الحل علاق tv nordmende nd 46 ks 4000 j
Emilson said:
i found that the remote control configuration is saved in a file in the system folder of tv "/vendor/tvconfig/config/ir_config.ini'.
Because tv isnt rooted yet, you need to access to this file via adb, allowing access to system files by adb and make copy of your oryginal config file, then replace it after flashing another firmware.
it worked for my on akai, nordmende, manta, and dijitsu firmwares on my Manta tv with TP.SK706S.PC822 board and with Mediatek m7332 chip.
To enable ADB you have to go to hidden 'service menu' by pressing buttons (MENU) + (1) + (1) + (4) + (7). and the service menu will appear, then you need to go to the ''debug'' option and then switch ''adb enable'' to 'on'.
Then you can explore your tv file system from your android phone by the app Bugjaeger Mobile ADB app after connecting thru wifi by ip of your tv.
If ADB is enabled and tv is connected to wifi, app should find your tv, by pressing button 'connect to' and 'search' for adb devices. or you can type tvs ip manually.
Now You can view system folders, copy files, install apps thru adb wifi, add special permisions to apps, rebot system to recovery etc etc.
But 'files' inide the system are still read only, so you cant delete/replace it nothing yet.
To make file system read and write enabled You have to use ADB command thru your PC
So you need to download some mini ADB tool (adb.exe) for windows, run it in windows 'command prompt' by typing:
adb connect 192.168.**.*** (-type your tvs ip, also you can find tvs ip in main 'service menu')
adb root
adb remount
adb shell chmod 0777 /system
Now file system is read and write enabled and you can backup your oryginal 'ir_config.ini', thru 'bugjaeger' app in section "files'. The same way replace it after changing with another firmware.
At this time You can replace/remove system apps as youtube, netflix, etc.
Read file system is enabled only till reboot. after reboot you need to redo pc ADB commands to get acces to r/w filesystem.
btw.
Section 'packages' in 'bugjaeger' app let you send and install apps downloaded/installed on your phone to your tv thru wifi. You can also run or disable/enable system apps thru this section, instead of removing it from the system.
Section 'command' let you reboot your device, or grant some special permision of some app if you need it,
Click to expand...
Click to collapse
Have you found out a way to change bootanimation?
I have found a firmware that claims it is AOSP, can anybody try? https://remont-aud.net/dump/lcd_pdp...06s_pc822_b19457/248-1-0-110135?l3BuY2?lb0zah
EnzoErrichiello said:
your firmware is much better than mine by the way... it has apple play, play store and an app to control the device with the phone. it is a shame that the remote does not work, otherwise i would have kept it!
Click to expand...
Click to collapse
kaitokid1412 said:
I tried doing this but i am stuck at "no command". tried randomly pushing buttons on the tv but nothing is happening. sad, my OS is Android 11 Wisdom Share. I think it is stuck at boot because I messed with the build.prop
Click to expand...
Click to collapse
Whoa, android 11? Whats your tv model?
By the way, bootanimation is placed at /system/media/bootanimation.zip
You just need to download any bootanimation.zip from web and replace it, when system folders are read/write enabled.
I already changed it in mine
There is one bootanimation link for example:
atv11_bootanimation/Working and Tested/bootanimation.zip at master · khurramrizvi/atv11_bootanimation
A brand new boot animation coming straight from Google's Android TV 11 build. - atv11_bootanimation/Working and Tested/bootanimation.zip at master · khurramrizvi/atv11_bootanimation
github.com
Probably newest original google androidTV bootanimation
Emilson said:
Whoa, android 11? Whats your tv model?
By the way, bootanimation is placed at /system/media/bootanimation.zip
You just need to download any bootanimation.zip from web and replace it, when system folders are read/write enabled.
I already changed it in mine
There is one bootanimation link for example:
atv11_bootanimation/Working and Tested/bootanimation.zip at master · khurramrizvi/atv11_bootanimation
A brand new boot animation coming straight from Google's Android TV 11 build. - atv11_bootanimation/Working and Tested/bootanimation.zip at master · khurramrizvi/atv11_bootanimation
github.com
Probably newest original google androidTV bootanimation
Click to expand...
Click to collapse
Mine, I think, is a rebranded Chinese TV. N-Vision S900-65S1NV. It is Android 11 yet still with a Wisdom Share UI. That's the thing, I have located the bootanimation folder in mine, it's in vendor/tvconfig folder, however, when I tried to replace it using bugjaeger, the system does not read the new boot animation.
Oh ok, in a vendor/tvconfing folder you can find a branded bootlogo etc, but i couldnt change it that way too.
To change it you have to use tvs 'service menu' and go to 'general settings' -> 'import/export' and then you can use 'logo export/logo import' to download original bootlogo and upload new one, but you need to plug some usb pendrive for it.
Then to change 'wisdomshare logo' you have to replace bootanimation.zip in system/media folder.
Btw, Do you have any links with firmware to your tv? Mine is still on android 9.0 cant find any upgrades.
do you know whats your tv motherboard name? Mine is 'tpsk706s.pc822'